Lao template

Lao template, Total:214 items.

The international standard classification for "Lao template" includes: Moulding equipment , Forging equipment. Presses. Shears .

The Chinese standard classification for "Lao template" includes: Moulds , Other light industry machinery , Mould , Technical management , Industrial control and computer application equipment .

Group Standards of the People's Republic of China

T/SDAS 514-2022 Technical regulations for processing Laoshan flowery and fruity-flavored white tea
T/LSZQ 006-2021 No template special-shaped head automatic edge turning machine

Professional Standard - Railway

TB 1538.1-1984 Rear side guide column upper template of cold stamping die template
TB 1538.18-1984 General template for cold stamping die template
TB 1541.17-1984 Cold stamping die concave and convex die device quick change punch fixed plate (Type I)
TB 1541.19-1984 Cold stamping die concave and convex die device quick change punch fixed plate (Type Ⅱ)
TB 1538.15-1984 Cold stamping die formwork four guide column lower formwork (Type A)
TB 1538.17-1984 Cold stamping die formwork four guide column lower formwork (Type B)
TB/T 3294-2013 Special Vacuum Demoulding Machine for the CRTS ⅡTrack Slab
TB 1538.16-1984 Cold stamping die formwork four guide pillar upper formwork (Type B)
TB 1538.14-1984 Cold stamping die formwork four guide pillar upper formwork (Type A)

Professional Standard - Aerospace

QJ 874.5-1984 Plastic Extrusion Mold Cavity Plate
QJ 2528.18-1993 Large combined bending die element thick backing plate
QJ 2514.5-1993 Cold stamping die template circular concave template
QJ 2183.4-1991 Adhesive-bonded cold stamping die frame parts four guide pillars (FB, FR) type lower template
QJ 776.6-1983 Small-sized Combination Die - 30 Wide Stripper Plate
QJ 2534.2-1993 Binder plate for small combined bending die components
QJ 775.2-1983 Small-sized Combination Die - Wide Parallel Positioning Plate
QJ 874.2-1984 Plastic Extrusion Mould - Cavity Plate
QJ 874.6-1984 Plastic Extrusion Mould - Cavity Plate
QJ 775.12-1983 Small-sized Combination Die - Guide Plate
QJ 776.8-1983 Small-sized Combination Die - 60 Wide Stripper Plate
QJ 775.1-1983 Small-sized Combination Die - Parallel Positioning Plate
QJ 748-1982 Typical combination of transverse guide plate punching die
QJ 772.13-1983 Small combination die width 150 punching base plate
QJ 2533.8-1993 Combination of small combined bending die components punching board
QJ 772.14-1983 Small combination die width 180 square base plate
QJ 776.7-1983 Small-sized Combination Die - 45 Wide Stripper Plate
QJ 776.18-1983 Small-sized Combination Die - Abutting Push-off Plate
QJ 772.11-1983 Small combination die width 120 rectangular base plate
QJ 776.12-1983 Small-sized Combination Die - 90° Arc Unloading Block
QJ 772.10-1983 Small-sized Combination Die - Rectangular Foundation Plate with 120 in Width
QJ 777.3-1983 Small-sized Combination Die - 60 Wide Clamping Plate
QJ 874.1-1984 Plastic Extrusion Mould - Cavity Plate
QJ 773.40-1983 Small Combination Die Bending Platen
QJ 2534.3-1993 Press plate of A-type punch for small combined bending die element
QJ 775.6-1983 Small-sized Combination Die - Left Angle Positioning Plate
QJ 776.13-1983 Small-sized Combination Die - 180° Arc Unloading Block
QJ 776.9-1983 Small-sized Combination Die - Extending Push Plate
QJ 874.4-1984 Plastic Extrusion Mould - Cavity Plate
QJ 2514.1-1993 Cold stamping die template Rectangular concave template
QJ 2517.1-1993 Cold stamping die general template A type general template
QJ 2517.2-1993 Cold stamping die general template B type general template
QJ 2529.8-1993 A-type positioning plate for large combined bending die components
QJ 2531.4-1993 A-shaped top plate of large combined bending mold element
QJ 2534.1-1993 Small combination bending die element punch fixed plate
QJ 776.17-1983 Small-sized Combination Die - Push-off Plate
QJ 2534.4-1993 B-type punch press plate for small combined bending die components
QJ 747-1982 Typical combination of longitudinal guide plate punching die
QJ 2528.19-1993 Medium-thick backing plate for large combined bending die components
QJ 2531.5-1993 B-type top plate of large combined bending die element
QJ 2528.20-1993 Thin backing plate for large combined bending die components
QJ 772.9-1983 Small-sized Combination Die - Rectangular Foundation Plate with 120 in Width
QJ 777.20-1983 Small-sized Combination Die - Press Plate
QJ 775.11-1983 Small-sized Combination Die - Equant Plate
QJ 2534.5-1993 Backing plate for small combined bending die element
QJ 772.5-1983 Small combination die width 60 rectangular base plate
QJ 2529.9-1993 B-type positioning plate for large combined bending die components
QJ 874.8-1984 Plastic Extrusion Mould - Cavity Plate
QJ 775.5-1983 Small-sized Combination Die - Right Angle Positioning Plate
QJ 775.3-1983 Small-sized Combination Die - V-shaped Positioning Plate
QJ 777.2-1983 Small-sized Combination Die - 45 Wide Clamping Plate
QJ 777.1-1983 Small-sized Combination Die - 30 Wide Clamping Plate
QJ 777.14-1983 Small-sized Combination Die - Push Plate Stud
QJ 775.4-1983 Small-sized Combination Die - Strip Positioning Plate
QJ 772.15-1983 Small combination die width 180 blanking base plate
QJ 772.7-1983 Small-sized Combination Die - Rectangular Foundation Plate with 90 in Width (7)
QJ 874.7-1984 Plastic Extrusion Mould - Cavity Plate
QJ 2530.2-1993 Large combined bending die element connecting plate
QJ 776.11-1983 Small-sized Combination Die - Orifice Hard Stripper Plate
QJ 874.3-1984 Plastic Extrusion Mold Cavity Plate
QJ 778.1(2)-1983 Small-sized Combination Die - Cover Plate
QJ 772.8-1983 Small-sized Combination Die - Rectangular Foundation Plate with 120 in Width

Taiwan Provincial Standard of the People's Republic of China

CNS 6545-1980 Master template for plastic molds

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 41860.1-2022 Tools for moulding—Locating rings—Part 1:Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
GB/T 12555.5-1990 Injection mould for plastic large-size mould bases--Support plates
GB/T 12555.4-1990 Injection mould for plastic large-size mould bases--Mould plates
GB/T 12555.6-1990 Injection mould for plastic large-size mould bases -Ejector plates
GB/T 12555.12-1990 Injection mould for plastic large-size mould bases -Guide bushes with head
GB/T 41860.2-2022 Tools for moulding—Locating rings—Part 2:Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
GB/T 44533.2-2024 Tools for pressing—Ball-lock punch retainers—Part 2: Types C and D, reduced for light duty
GB/T 12555.10-1990 Injection mould for plastic large-size mould bases -Guide pins for ejector plater
GB/T 12555.3-1990 Injection mould for plastic large-size mould bases－Elamping plates
GB/T 44533.3-2024 Tools for pressing—Ball-lock punch retainers—Part 3: Type E, reduced for heavy duty

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36586.2-2018 Tools for pressing—Wear plates—Part 2:Type B
GB/T 36586.1-2018 Tools for pressing—Wear plates—Part 1:Type A
GB/T 39164-2020 Tools for moulding—Thermal insulating sheets for injection moulds

Professional Standard - Aviation

HB 4533.9-1991 H Type Hole Series Combined Clamp Drill Jigs - Drill Plates
HB 4533.8-1991 Drilling template for H-type hole combination fixture
HB 4084-1988 B Type Female Die Tightening Board
HB 4533.7-1991 Drilling template for H-type hole combination fixture
HB 4095-1988 A Type Male Die Connecting Board
HB 4533.5-1991 Drilling template for H-type hole combination fixture
HB 4096-1988 B Type Male Die Connecting Board
HB 4083-1988 A Type Female Die Tightening Board
HB 4533.10-1991 H-shaped Hole-system Combined Jig Pieces - Drill Plate
HB 4533.6-1991 Drilling template for H-type hole combination fixture
HB 4097-1988 C Type Male Die Connecting Board

工业和信息化部

WJ/T 847-2014 Cold stamping die typical combined guide plate die
WJ/T 848-2014 Typical combination guide plate die of cold punching die

Professional Standard - Military and Civilian Products

WJ 888-1997 A-type lining plate for typical combination of cold stamping die
WJ 886-1997 C-shaped rectangular backing plate for typical combination of cold stamping die
WJ 900-1997 B-type lining plate for typical combination of cold stamping die
WJ 882-1997 B-shaped rectangular fixing plate for typical combination of cold stamping die
WJ 887-1997 D-type rectangular backing plate for typical combination of cold stamping die
WJ 898-1997 Type A circular backing plate for typical combination of cold stamping die
WJ 896-1997 A-type circular fixing plate for typical combination of cold stamping die
WJ 897-1997 B-type circular fixing plate for typical combination of cold stamping die
WJ 847-1997 Typical combined guide plate die for cold stamping die
WJ 902-1997 Unloading plate for typical combination of cold stamping die
WJ 884-1997 A-shaped rectangular backing plate for typical combination of cold stamping die
WJ 880-1997 Rectangular stripping plate for typical combination of cold stamping die
WJ 881-1997 A-shaped rectangular fixing plate for typical combination of cold stamping die
WJ 878-1997 Type A stripping plate for typical combination of cold stamping die
WJ 885-1997 B-type rectangular backing plate for typical combination of cold stamping die
WJ 899-1997 Type B circular backing plate for typical combination of cold stamping die
WJ 879-1997 B-type unloading plate for typical combination of cold stamping die
WJ 848-1997 Typical combined guide plate die and lower die for cold stamping die
WJ 877-1997 Guide plate for typical combination of cold stamping die
WJ 883-1997 C-shaped rectangular fixing plate for typical combination of cold stamping die

Professional Standard - Electron

SJ 3111-1988 Cold press dies - Retaining plate for longitudinal feeding of Ⅰ-type fixed guide plate
SJ 2996.6-1988 Combined dies-Γ-form support plate
SJ 3033.3-1988 Combined dies-L-form locating plate
SJ 3096-1988 Cold press dies-Typical assembly for longitudinal feeding of Ⅰ-type fixed guide plate
SJ/T 10341.30-1993 Plates of fine blanking die-Taper die plates
SJ 2996.7-1988 Combined dies-Γ-form support plate
SJ 3112-1988 Cold press dies - Punch holder for cross feeding of Ⅰ-type fixed guide plate
SJ 3098-1988 Cold press dies - Typical assembly for longitudinal feeding of Ⅱ-type fixed guide plate
SJ/T 10341.36-1993 Plates of fine blanking die-Adjusting plates
SJ 3110-1988 Cold press dies - Backing plate for longitudinal feeding of Ⅰ-type fixed guide plate
SJ 3032.3-1988 Combined dies-L-form locating plate
SJ 3114-1988 Cold press dies - Retainer plate for cross feeding of Ⅰ-type fixed guide plate
SJ/T 10341.29-1993 Plates of fine blanking die-Rectangular die plates
SJ 3097-1988 Cold press dies-Typical assembly for cross feeding of Ⅰ-type fixed guide plate
SJ 3113-1988 Cold press dies-Backing plate for cross feeding of Ⅰ-type fixed guide plate
SJ 3033.4-1988 Combined dies - L-form locating plate with scale
SJ 3109-1988 Cold press dies-Punch holder for longitudinal feeding of Ⅰ-type fixed guide plate
SJ/T 10341.28-1993 Plates of fine blanking die-Square die plates
SJ/T 10341.31-1993 Plates of fine blanking die-Round die plates

机械工业部

JB/T 8068.3-1995 Typical combination of cold punching die, guide plate and die, typical combination of spring pressing and longitudinal feeding
JB/T 8068.1-1995 Typical combination of cold punching die guide plate die Typical combination of longitudinal feeding
JB/T 8068.4-1995 Typical combination of cold punching die, guide plate and die, typical combination of elastic pressure and transverse feeding
JB/T 8068.2-1995 Typical combination of cold punching die guide plate die Typical combination of transverse feeding

Professional Standard - Machinery

JB/T 8746.2-1998 Components of plaastics profile extrusion tooling. Round plate
JB/T 11659-2013 Dies for sheet metal bending — Type and size
JB/T 7643.3-1994 Die template rectangular backing plate
JB/T 11845-2014 EPS Pattern Plate for Full Mold Casting
JB/T 7643.6-1994 Die template circular backing plate
JB/T 4208.8-1996 Universal Part for Cold Heading Dies Clamp Plate for Cutter A Type
JB/T 8383-1996 Model designation method for industrial PC and their templates
JB/T 8746.1-2008 Components of plastic profile extrusion tooling—Part 1:Rectangular mould plates
JB/T 12250-2015 Double-face mold plate horizontal parting flaskless automatic moulding line
JB/T 7644.4-1994 Punching die single punch template partial installation single punch backing plate
JB/T 7643.4-1994 Die template circular concave template
JB/T 6334-2013 Double-face mold plate horizontal parting falask-less automatic moulding machine
JB/T 8746.1-1998 Components of plastics profile extrusion tooling. Rectangular mould plates
JB/T 8746.6-2008 Components of plastic profile extrusion tooling—Part 6:mould plates
JB/T 7643.1-1994 Die Template Rectangular Concave Template
JB/T 7644.2-1994 Die Single Punch Template Single Punch Backing Plate
JB/T 8746.5-1998 Components of plastics profile extrusion toolion Rectangular mould plates
JB/T 8746.2-2008 Components of plastic profile extrusion tooling—Part 2:Round mould plates
JB/T 8746.6-1998 Components of plastics profile extrusion tooling. Land plate
JB/T 7644.1-1994 Die single punch template single punch fixed plate
JB/T 5053-1991 Method for Designating Types of Templates for Decentralized Control System

Military Standard of the People's Republic of China-General Armament Department

GJB 10203.1-2021 General requirements for modeling and simulation based on basic object model Part 1: Basic object model template

HU-MSZT

MSZ 11264-1969 Template type and template size
MSZ 6528-1984 Ball side template
MNOSZ 17104-1953 Symmetry calculation of cone template. Trough type conical formwork equipment. Exterior wall cone
MSZ 17106-1984 Cone, column inspection template 7/24 Column type large machinery, tool cone of the template

Association of German Mechanical Engineers

VDI 3357-1995 Wear plates in large forming dies

German Institute for Standardization

DIN 68707:1964 Plywood-manufactured moulds for seats
DIN ISO 15600:2012-07 Tools for moulding - Thermal insulating sheets for injection moulds (ISO 15600:2000)

CU-NC

NC 09-114-1968 Ejector pin retainer plates for molds

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE SF-98-9-5-1998 Analytical Model for the Design of In-Slab Electric Heating Panels
ASHRAE 3851-1995 Simplified Model for the Design of Radiant In-Slab Heating Panels

GOST

GOST R 59936-2021 Large-panel form. General specifications

Association Francaise de Normalisation

NF ISO 15600:2001 Molding Tooling - Thermal Insulation Sheets in Injection Molds
NF ISO 16367:2008 Press Tooling - Guide Plates - U and V Blocks
NF E63-116*NF ISO 11900-2:2009 Tools for pressing - Ball-lock punch retainers - Part 2 : types C and D, reduced for light duty

American National Standards Institute （ANSI)

ANSI/UL 1703-2013 Standard for Flat-Plate Photovoltaic Modules and Panels
ANSI/UL 1703a-2013 Standard for Flat-Plate Photovoltaic Modules and Panels
ANSI/IEEE 1516.2:2010 Standard for Modeling and Simulation (M&S) High Level Architecture (HLA) - Object Model Template (OMT) Specification

GSO

GSO ISO 24233:2013 Tools for moulding -- Tool specification sheet for diecasting dies
GSO ISO 16367:2014 Tools for pressing -- Guide plates -- U- and V-blocks
GSO ISO 15600:2014 Tools for moulding -- Thermal insulating sheets for injection moulds

VDI - Verein Deutscher Ingenieure

VDI/BS 2552 BLATT 11.3-2019 Building information modeling -Discipline model - Formwork and scaffolding systems (in situ concrete)
VDI 3417-2003 Documentation of sheet metal forming simulation - System requirement

South African Bureau of Standard

SANS 6213:1993 Leatherboards or fibreboards - Collapsing load of moulded shapes

IN-BIS

IS 4604-1975 Specification for templates for machine formed boxes

Underwriters Laboratories (UL)

UL 1437-1993 Electrical analog instruments, panel board types

International Organization for Standardization (ISO)

ISO 6753-2:1998 Tools for pressing and moulding - Machined plates - Part 2: Machined plates for moulds

British Standards Institution (BSI)

BS ISO 9183-1:2008 Tools for pressing - Wear plates for press dies - Type A

AT-ON

ONORM B 3023-1991 Solid wood panels; three-ply formwork panels; types and requirements; marking of conformity

U.S. Military Regulations and Norms

ARMY A-A-59125/1 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Screw Type, Class 37TB
ARMY A-A-59125/14 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Stud Type, Class 8TB
ARMY A-A-59125/3 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Screw Type, Class 39TB
ARMY A-A-59125/16 VALID NOTICE 1-2011 TERMINAL BOARDS, MOLDED, BARRIER STUD TYPE, CLASS 10TB
ARMY A-A-59125/2 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Screw Type, Class 38TB
ARMY A-A-59125/15 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Stud Type, Class 9TB
ARMY A-A-59125/9 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Stud Type, Class 3TB
ARMY A-A-59125/5 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Screw Type, Class 41TB
ARMY A-A-59125/22 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Stud Type, Class 18TB
ARMY A-A-59125/12 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Stud Type, Class 6TB
ARMY A-A-59125/26 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Stud Type, Class 43TB
ARMY A-A-59125/23 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Stud Type, Class 25TB
ARMY A-A-59125/13 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Stud Type, Class 7TB
ARMY A-A-59125/4 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Screw Type, Class 40TB
ARMY A-A-59125/20 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Stud Type, Class 16TB
ARMY A-A-59125/10 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Stud Type, Class 4TB
ARMY A-A-59125/24 VALID NOTICE 1-2011 Terminal Boards, Molded, Barrier Stud Type, Class 26TB

RU-GOST R

GOST 20131-1980 Pattern plates. Types. Basic dimensions. Specifications
GOST 6122-1975 Moulding micanite. Specifications
GOST 22331-1993 Plote lifting screws for wooden cast patterns. Design

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1516.2-2010 Modeling and Simulation (M&S) High Level Architecture (HLA) — Object Model Template (OMT) Specification (IEEE Computer Society)