Flow Standard

Flow Standard, Total:427 items.

The international standard classification for "Flow Standard" includes: Other electrical accessories , Powder metallurgy , Chemical analysis of metals .

The Chinese standard classification for "Flow Standard" includes: Diagnostic standard for public nuisance diseases , Technical management , Flow capacity and material level instrument , Economic management , Explosion-proof electric apparatus , Powder metallurgy analysis method , Metal physical property test method .

National Metrological Verification Regulations of the People's Republic of China

JJG 1142-2017 Dynamic Pressure Standards
JJG(电子) 04017-1988 BJ2900 Bipolar Transistor Reverse Cut-off Current Measurement Standard Instrument Trial Verification Regulations
JJG 643-2024 Flow Standard Facilities by Master Meter Method
JJG 166-2022 DC Standard Resistors

National Metrological Technical Specifications of the People's Republic of China

JJF 1586-2016 Calibration Specification for Active Piston Provers
JJF 1701.1-2018 Program of Pattern Evaluation of Instrument Transformers--Part 1: Standard Current Transformers
JJF(机械) 002-2008 DC Standard Current Source Calibration Specifications
JJF(建材) 172-2020 Calibration specification for passive piston gas flow standard devices

Professional Standard - Hygiene

WS 214-2008 Diagnostic Criteria for Japanese Encephalitis
WS 214-2001 Diagnostic criteria and principles of management of japanese B encephalitis

Group Standards of the People's Republic of China

T/CAEE 021-2020 Inspection standard for AC charging pile and its components
T/CAS 399-2020 Energy-saving type DC driven air-conditioner
T/CECS 1326-2023 Full flow penetrating test standard
T/CECS 587-2019 Design specification for side0flow lamella tank

Professional Standard - Electron

SJ/T 9559.11-1993 D.C. brushless motors for use in diskette drivers--Quality grading standard
SJ/T 9503.17-1991 Aluminium electrolyte capacitors for use in a.c. motors--Quality grading standard
SJ/T 9503.16-1991 Metallized polypropylene capacitors for use in a.c. motors--Quality grading standard
SJ/T 9559.14-1993 16 SYK08-16 SYK08-J368,20SYK08 permanent magnet moving coil servomotors--Quality grading standardJ368,20SYK08 permanent magnet moving coil servomotors--Quality grading standard
SJ/T 10018-1991 Type 90ZWR brushless D. C. motor for floppy disk driver

Professional Standard - Water Conservancy

SL/T 232-1999 Verification method of dynamic liquid discharge and flow velocity facilities

Professional Standard - Labor and Labor Safety

LD/T 104-1998 Transformer Industry Labor Quota Digital Model Time Standard

Taiwan Provincial Standard of the People's Republic of China

CNS 318-1971 AC Circuit Breakers (for Short Circuit Test)

未注明发布机构

FORD EC1-1992 NEMA AC MOTOR STARTERS, ELECTRO-MECHANICAL TYPE, REQUIREMENTS AND TESTS
FORD ESF-M6B12-A-2009 INK, MARKING - FLUID TYPE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M6B8-A-2002 INK, MARKING, FLUID TYPE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD M99C82-B-1988 SOLVENT, FLOW-TEST Shown on M99C82-A

Professional Standard - Aviation

HB 4988.4-1988 Machining Standard Component Workpiece Quota Time Standard Typical Workpiece

Professional Standard - Coal

MT 111-1986 Mining explosion-proof low voltage alternating vacuum electromagnetic starter
MT/T 111-2011 Mine explosion-proof low-voltage AC vacuum electromagnetic starter
MT 111-1998 Mining explosion-proof low voltage alternating vacuum electromagnetic starter
MT 111-2011 Mining explosion-proof low voltage alternating vacuum electromagnetic starter

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1482-2010 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
GB/T 1482-1984 Metallic powders－Determination of flowability by means of a calibrated funnal (Hall flowmeter)
GB/T 1482-2022 Metallic powders—Determination of flow rate—Calibrated funnel methods（Hall flowmeter）

Military Standard of the People's Republic of China-General Armament Department

GJB 1856A-2008 Requirements for standardization of logistics equipment development and type select

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 12-1934 STANDARDS FOR CONSTANT CURRENT TRANSFORMERS OF THE MOVING COIL TYPE
AIEE No. 12-1934 (ASA C57.1-1933) AIEE Standards for Constant Current Transformers of the Moving Coil Type
IEEE P316/D7, February 2025 IEEE Draft Standard Requirements for Direct Current Instrument Shunts
IEEE 50-1953 Standard for AUTOMATIC CIRCUIT RECLOSERS for A-C DISTRIBUTION SYSTEMS
IEEE C37.46-2000 Amerian National Standard for High Voltage Expulsion and Current-Limiting Type Power Class Fuses and Fuse Disconnecting Switches
IEEE 316-1971 STANDARD REQUIREMENTS FOR DIRECT CURRENT INSTRUMENT SHUNTS
IEEE Std 316-1971 IEEE Standard Requirements for Direct Current Instrument Shunts
IEEE/ANSI C37.53.1-1989 American National Standard High-Voltage Current-Limiting Motor-Starter Fuses -- Conference Test Procedures
IEEE 2030.1.1-2015 Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles
AIEE No 50-1949 AIEE Proposed Standard for Automatic Circuit Reclosers for A-C Distribution Systems
IEEE 50-1949 Proposed Standard for AUTOMATIC CIRCUIT RECLOSERS for A-C DISTRIBUTION SYSTEMS
IEEE PC57.13.7/D7-2016 Draft Standard for Draft Standard for Current Transformers with Maximu mA Secondary Current of 250mA
IEEE P316/D6, January 2025 IEEE Draft Standard Requirements for Direct Current Instrument Shunts
IEEE Std 597-1983 IEEE Standard Practices and Requirements for General Purpose Thyristor DC Drives
IEEE C37.47-2000 American National Standard for High Voltage Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches
IEEE Std C37.47-2000 American National Standard for High Voltage Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches
AIEE No 50-1953 (Supersedes September 1949 issue) AIEE Standard for Automatic Circuit Reclosers for A-C Distribution Systems
IEEE P2030.1.1/D2.0, April 2015 IEEE Draft Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles
AIEE No 19-1943 (Supercedes A. I. E. E. Standard N AIEE Standards for Alternating Current Power Circuit Breakers
IEEE P2030.1.1/D2.1 June 2015 IEEE Approved Draft Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles
IEEE Std 1566-2005 IEEE Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger
IEEE Std C37.47-2011 - Redline IEEE Standard Specifications for High-Voltage (>1000 V) Distribution Class Current-Limiting Type Fuses and Fuse Disconnecting Switches - Redline
IEEE P2030.1.1/D4, September 2021 IEEE Approved Draft Standard Technical Specifications of a DC Quick and Bi-directional Charger for Use with Electric Vehicles
IEEE Std 2030.1.1-2015 IEEE Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles
IEEE PC57.13.7/D9-2018 Draft Standard for Current Transformers with Maximum mA Secondary Current of 250mA
IEEE C62.1-1984 STANDARD FOR SURGE ARRESTERS FOR AC POWER CIRCUITS
IEEE PC37.47/D5, May 2010 IEEE Draft Standard Specifications For High Voltage (> 1000 V) Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches
IEEE Unapproved Draft Std PC37.60/D6, Jun 2009 IEEE Draft Standard for Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV
IEEE P1566/D2, October 2014 IEEE Draft Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger
IEEE P1566/D3, October 2014 IEEE Draft Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger
AIEE No 28-1944 AIEE American Standards for Lightning Arresters for Alternating Current Power Circuits
AIEE No 28-1962 AIEE American Standards for Lightning Arresters for Alternating Current Power Circuits
IEEE C57.13.7-2018 IEEE Standard for Current Transformers with Maximum Milliampere Secondary Current of 250 mA
IEEE Std C37.013-2021 IEEE Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current
IEEE 1566-2005 Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger
AIEE No 28-1957 AIEE American Standards for Lightning Arresters for Alternating Current Power Circuits
IEEE P2030.1.1/D2, June 2021 IEEE Draft Standard Technical Specifications of a DC Quick and Bi-directional Charger for Use with Electric Vehicles
PC57.13.7/D7, October 2016 IEEE Draft Standard for Current Transformers with a Maximum mA Secondary Current of 250mA
IEEE 2030.1.1-2021 IEEE Standard for Technical Specifications of a DC Quick and Bidirectional Charger for Use with Electric Vehicles
IEEE PC57.13.7/D7, October 2016 IEEE Draft Standard for Current Transformers with a Maximum mA Secondary Current of 250mA
IEEE Std 1301.1-1991 IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled With 2 Mm Connectors
IEEE Std 1301.3-1992(R2009) IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled with 2.5 mm Connectors

American Society for Testing and Materials (ASTM)

ASTM C1130-07(2012) Standard Practice for Calibrating Thin Heat Flux Transducers
ASTM D5719-95(2006) Standard Guide for Simulation of Subsurface Airflow Using Ground-Water Flow Modeling Codes
ASTM F2930-12 Standard Guide for Compliance with Light Sport Aircraft Standards
ASTM F2930-14 Standard Guide for Compliance with Light Sport Aircraft Standards
ASTM F2930-13 Standard Guide for Compliance with Light Sport Aircraft Standards
ASTM F2626-12 Standard Terminology for Light Sport Aircraft
ASTM C1130-07 Standard Practice for Calibrating Thin Heat Flux Transducers
ASTM C1266-17 Standard Test Method for Flow Characteristics of Preformed Tape Sealants
ASTM D4280-18 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
ASTM D4280-03 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
ASTM D5611-94e1 Standard Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application
ASTM D4558-02 Standard Practice for Collecting Benthic Macroinvertebrates With Drift Nets
ASTM D3123-09(2017) Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
ASTM D4558-85(1995) Standard Practice for Collecting Benthic Macroinvertebrates With Drift Nets
ASTM D3123-25 Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
ASTM D5981/D5981M-18 Standard Guide for Calibrating a Groundwater Flow Model Application
ASTM D4558-85(1989) Standard Practice for Collecting Benthic Macroinvertebrates With Drift Nets
ASTM C1130-90(2001) Standard Practice for Calibrating Thin Heat Flux Transducers
ASTM D4556-85(1995)e1 Standard Guide for Selecting Stream-Net Sampling Devices for Collecting Benthic Macroinvertebrates
ASTM C374-14(2018) Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM D5981-96e1 Standard Guide for Calibrating a Ground-Water Flow Model Application
ASTM C374-25 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM B187-00 Standard Specification for Copper Bar, Bus Bar, Rod, and Shapes
ASTM D3579-77(2023) Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
ASTM D5490-93e1 Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information
ASTM C1444-00 Standard Test Method for Measuring the Angle of Repose of Free-Flowing Mold Powders
ASTM E3373-23 Standard Test Method for Scour of Hydrodynamic Separators and Settling Devices
ASTM B187-00e1 Standard Specification for Copper Bar, Bus Bar, Rod, and Shapes
ASTM F2930-16 Standard Guide for Compliance with Light Sport Aircraft Standards
ASTM F2930-16(2025) Standard Guide for Compliance with Light Sport Aircraft Standards
ASTM F2930-14a Standard Guide for Compliance with Light Sport Aircraft Standards
ASTM C374-70(1998) Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM F2930-15 Standard Guide for Compliance with Light Sport Aircraft Standards
ASTM F2930-16e1 Standard Guide for Compliance with Light Sport Aircraft Standards
ASTM C374-14 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits 40;Flow-Button Methods41;
ASTM C374-14(2015)e1 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM C374-70(2009) Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM D5337-04 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps
ASTM D5718-13 Standard Guide for Documenting a Groundwater Flow Model Application
ASTM RR-C08-1017 2000 C1444-Standard Test Method for Measuring the Angle of Repose of Free-Flowing Mold Powders
ASTM C639-15 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-24 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM D7919-14 Standard Guide for Filter Debris Analysis 40;FDA41; Using Manual or Automated Processes
ASTM D5718-95(2006) Standard Guide for Documenting a Ground-Water Flow Model Application
ASTM D3370-18 Standard Practices for Sampling Water from Flowing Process Streams
ASTM D5090-20 Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
ASTM D3370-25 Standard Practices for Sampling Water from Flowing Process Streams
ASTM C639-01(2011) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C1893-23 Standard Practice for Laboratory Performance Verification of Hydrodynamic Separators for the Treatment of Stormwater Runoff
ASTM C1130-17 Standard Practice for Calibration of Thin Heat Flux Transducers
ASTM D5090-90(2001) Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
ASTM C639-01(2007) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM D4556-02 Standard Guide for Selecting Stream-Net Sampling Devices for Collecting Benthic Macroinvertebrates
ASTM C939/C939M-16 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM C939/C939M-16a Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM C939/C939M-22 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM F2506-13 Standard Specification for Design and Testing of Light Sport Aircraft Propellers
ASTM C639-01 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM D5610-94(2008) Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling
ASTM D5610-94(2014) Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling
ASTM D3579-77(2004) Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
ASTM D5609-94(2008) Standard Guide for Defining Boundary Conditions in Ground-Water Flow Modeling
ASTM C639-95 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C639-15(2020) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM D5610-94(2002) Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling
ASTM D3579-77(2010) Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
ASTM D4411-03(2008) Standard Guide for Sampling Fluvial Sediment in Motion
ASTM D5090-07 Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
ASTM D8000-15(2020) Standard Practice for Flow Conditioning of Natural Gas and Liquids
ASTM B360-95 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
ASTM B360-01 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
ASTM D4411-03 Standard Guide for Sampling Fluvial Sediment in Motion
ASTM D4411-98 Standard Guide for Sampling Fluvial Sediment in Motion
ASTM D4411-03(2014) Standard Guide for Sampling Fluvial Sediment in Motion
ASTM D4411-03(2014)e1 Standard Guide for Sampling Fluvial Sediment in Motion
ASTM D7933-15 Standard Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers
ASTM F2626-07 Standard Terminology for Light Sport Aircraft
ASTM D2507-93(2001) Standard Terminology of Rheological Properties of Gelled Rocket Propellants
ASTM C939-02 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM D5337-97 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps
ASTM D5337-11(2016) Standard Practice for Flow Rate Adjustment of Personal Sampling Pumps
ASTM D5880-95(2000) Standard Guide for Subsurface Flow and Transport Modeling
ASTM D2196-10 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
ASTM D4344-84(1998) Standard Practice for Collecting Benthic Macroinvertebrates with Smith-McIntyre Samplers
ASTM F2972-14e1 Standard Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System

British Standards Institution (BSI)

BS ISO 3601-3:2005 Fluid power systems - O-rings - Quality acceptance criteria
DD ISO/TR 16144:2002 Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806
BS EN 14506:2005(2009) Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
BS IEC 62873-1:2017+A1:2020 Residual current operated circuit-breakers for household and similar use - Outline of blocks and modules for residual current device standards

Electronic Components, Assemblies and Materials Association

463-A-1999 Fixed Aluminum Electrolytic Capacitors for Alternating Current Motor Starting@ Heavy Duty (Type 1) and for Standard Duty (Type 2)
EIA-463-B-2003 Fixed Aluminum Electrolytic Capacitors for Alternating Current Motor Starting@ Heavy Duty (Type 1) and for Standard Duty (Type 2)

Society of Automotive Engineers (SAE)

SAE AS20010-2012 DRIVE - TYPE XX ENGINE ACCESSORY - DESIGN STANDARD FOR
SAE AS20010-2004 DRIVE - TYPE XX ENGINE ACCESSORY - DESIGN STANDARD FOR
SAE AS20005A-2018 DRIVE - TYPE XV ENGINE ACCESSORY - DESIGN STANDARD FOR
SAE AS20005-2012 DRIVE - TYPE XV ENGINE ACCESSORY - DESIGN STANDARD FOR
SAE J2546_200202 Model Specification Process Standard
SAE AS1895/1E-2018 COUPLING TYPE I (STANDARD PROFILE)
SAE AS1895/1A-1988 COUPLING TYPE I (STANDARD PROFILE)
SAE AS916-1966 STANDARD FOR OXYGEN FLOW INDICATORS
SAE AS1895/1C-1994 COUPLING@ V-RETAINER@ SINGLE LATCH@ TYPE I STANDARD PROFILE
SAE AS1895/1B-1992 COUPLING@ V-RETAINER@ SINGLE LATCH@ TYPE I STANDARD PROFILE
SAE AS1895/1-1985 COUPLING, TYPE 1 (STANDARD PROFILE)
SAE AS1895/1F Coupling, V-Retainer, Single Latch, Type I Standard Profile
SAE AS1895/1J COUPLING, V-RETAINER, SINGLE LATCH, TYPE I STANDARD PROFILE
SAE AS1895/1C Coupling, V-Retainer, Single Latch, Type I Standard Profile
SAE AS1895/1H COUPLING, V-RETAINER, SINGLE LATCH, TYPE I STANDARD PROFILE
SAE AS1895/1 Coupling, V-Retainer, Single Latch, Type I Standard Profile
SAE AS1895/1G Coupling, V-Retainer, Single Latch, Type I Standard Profile
SAE AS1895/1E Coupling, V-Retainer, Single Latch, Type I Standard Profile
SAE AS1895/1B Coupling, V-Retainer, Single Latch, Type I Standard Profile
SAE AS1895/1D Coupling, V-Retainer, Single Latch, Type I Standard Profile
SAE AS1895/1A Coupling, V-Retainer, Single Latch, Type I Standard Profile
SAE J1696-2017 Standard Fuel Filter Test Fluid
SAE J1696-1994 Standard Fuel Filter Test Fluid@ Standard
SAE AS1895/1H-2024 COUPLING, V-RETAINER, SINGLE LATCH, TYPE I STANDARD PROFILE
SAE AS1895/1J-2024 COUPLING, V-RETAINER, SINGLE LATCH, TYPE I STANDARD PROFILE
SAE J1696-1997 Standard Fuel Filter Test Fluid
SAE AS1895/22F-2024 COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE
SAE AS1895/22G-2024 COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE
SAE AS8020-2017 Minimum Performance Standards for Engine Driven D.C. Generators/Starter-Generators and Associated Voltage Regulators
SAE AS24563A Flange Profiles, V-Coupling, Design Standard
SAE AS8020 Minimum Performance Standards for Engine Driven D.C. Generators/Starter-Generators and Associated Voltage Regulators
SAE AS1300E-2018 PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR
SAE AS1300A-2000 PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR
SAE AS24563B-2013 FLANGE PROFILES, V-COUPLING, DESIGN STANDARD
SAE AS1300F-2019 PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR
SAE AS6349-2016 Minimum Performance Standard (MPS) for an Airborne AC to AC Converter
SAE AS1300-1975 BOSS - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR
SAE AS1300C-2007 PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR
SAE AS1895/1D-1996 Coupling, V-Retainer, Single Latch, Type I Standard Profile
SAE AS24563B Flange Profiles, V-Coupling, Design Standard
SAE AS1895/22-1992 COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE
SAE AS1895/22A-1996 Coupling@ V-Retainer@ Double Latch@ Type I Standard Profile
SAE AS1300C-2014 PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR
SAE AS1895/22B-2013 COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE
SAE AS24563A-2003 FLANGE PROFILES, V-COUPLING, DESIGN STANDARD
SAE AS1300D-2014 PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR
SAE J2030_201506 Heavy-Duty Electrical Connector Performance Standard
SAE J2577_200509 Heavy Duty Lamp Electrical Connector Standard
SAE AS1895/22B-2003 COUPLING@ V-RETAINER@ DOUBLE LATCH@ TYPE I STANDARD PROFILE
SAE AS1895/1F-2019 COUPLING, V-RETAINER, SINGLE LATCH, TYPE I STANDARD PROFILE
SAE AS1895/22E-2021 COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE
SAE AS1895/22C-2018 Coupling@ V-Retainer@ Double Latch@ Type I Standard Profile
SAE J2577-2005 Heavy Duty Lamp Electrical Connector Standard
SAE J2577_200809 Heavy Duty Lamp Electrical Connector Standard
SAE AS8020-1980 Minimum Performance Standards for Engine Driven D.C. Generators/ Starter-Generators and Associated Voltage Regulators
SAE AS1895/22D-2020 COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE
SAE J2030_199411 Heavy-Duty Electrical Connector Performance Standard
SAE AS1895/1D-2013 COUPLING, V-RETAINER, SINGLE LATCH, TYPE I STANDARD PROFILE
SAE AS1895/1G-2021 COUPLING, V-RETAINER, SINGLE LATCH, TYPE I STANDARD PROFILE
SAE AS1895/22A-2002 COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE
SAE AS20010A Drive - Type XX Engine Accessory - Design Standard For
SAE AS20010 Drive - Type XX Engine Accessory - Design Standard For
SAE J2577_201509 Heavy Duty Lamp Electrical Connector Standard
SAE J2577_201007 Heavy Duty Lamp Electrical Connector Standard
SAE J2030_200906 Heavy-Duty Electrical Connector Performance Standard
SAE J2577-2015 Heavy Duty Lamp Electrical Connector Standard
SAE AS20005-2004 DRIVE - TYPE XV ENGINE ACCESSORY - DESIGN STANDARD FOR
SAE J2030_200212 Heavy-Duty Electrical Connector Performance Standard
SAE J2030_200705 Heavy-Duty Electrical Connector Performance Standard
SAE AS20005 Drive - Type XV Engine Accessory - Design Standard For
SAE AS1300C Port - Ring Locked Fluid Connection Type Standard Dimensions For
SAE AS1300B Port - Ring Locked Fluid Connection Type, Standard Dimensions For
SAE AS1300D PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR
SAE AS1300A Port - Ring Locked Fluid Connection Type, Standard Dimensions For
SAE AS20005A DRIVE – TYPE XV ENGINE ACCESSORY - DESIGN STANDARD FOR
SAE AS1300 Port - Ring Locked Fluid Connection Type, Standard Dimensions For
SAE AS1300E PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR
SAE AS1300F Port - Ring Locked Fluid Connection Type Standard Dimensions for
SAE J2577-2008 Heavy Duty Lamp Electrical Connector Standard
SAE J2030-1994 Heavy-Duty Electrical Connector Performance Standard@ Standard (November 1994)
SAE AS4914D Aircraft Fluorescent Lighting Ballast/Fixture Safety Standard
SAE AS4914B-2006 Aircraft Fluorescent Lighting Ballast/Fixture Safety Standard
SAE AS4914E Aircraft Fluorescent Lighting Ballast/Fixture Safety Standard
SAE J2030-2002 (R) Heavy-Duty Electrical Connector Performance Standard
SAE J2030-2025 Heavy-Duty Electrical Connector Performance Standard
SAE J2577-2010 Heavy Duty Lamp Electrical Connector Standard
SAE J2030-2015 Heavy-Duty Electrical Connector Performance Standard@ Standard (November 1994)
SAE AS4914D-2016 Aircraft Fluorescent Lighting Ballast/Fixture Safety Standard
SAE AS4914E-2021 Aircraft Fluorescent Lighting Ballast/Fixture Safety Standard
SAE MA2024-2015 FLANGE PROFILES, V-COUPLING, DESIGN STANDARD, METRIC
SAE MA2024-1995 Flange Profiles@ V-Coupling@ Design Standard@ Metric
SAE AS4201A-2015 PORT - RING LOCKED FLUID CONNECTION TYPE, 8000 PSI DESIGN STANDARD
SAE J2030-2009 Heavy-Duty Electrical Connector Performance Standard
SAE J2030-2007 Heavy-Duty Electrical Connector Performance Standard
SAE AS4201 Port - Ring Locked Fluid Connection Type, 8000 psi Design Standard

Spanish Association for Standardization (UNE)

UNE 20-163-1985 Acceptance and collection standards for rectification of traction rotating appliances
UNE-EN 14506:2006 Devices to prevent pollution by backflow of potable water. Automatic diverter. Family H, type C.

Bureau of Indian Standards

IS 11067-1984 Direct current standard resistors
IS 17891-3-2023 Fluid Power Systems-O-rings - Part 3 Quality Acceptance Criteria

Czech Standards Institute (UNMZ)

CSN ON 04 7216-1965 Ejector 1000A cabin jet specifications and standards
CSN ON 04 7210-1965 Injector TV6 specifications and standards
CSN 10 9011-1978 Pneumostatic drives. Nominal air flow rates
CSN 35 3150-1979 Starters with faceplate and drum-type controller for slip-ring A. C. motors and D. C. motors.

Argentine Institute of Standardization

IRAM 2113-1951 Standard ballasts for electric lamps
IRAM 2099-1953 Transformers for current conduction and shunting and standard transformers (general conditions)

Cooling Technology Institute

CTI STD-146-2008 Standard for Liquid Flow Measurement

Ente Nazionale Italiano di Unificazione

UNI ISO 3601-3:2020 Fluid power systems — O-rings — Part 3: Quality acceptance criteria
UNI ISO 8778:1993 Pneumatic fluid power. Standard reference atmosphere.
UNI ISO 10099:2005 Pneumatic fluid power - Cylinders - Final examination and acceptance criteria
UNI EN 246:1989 Sanitary tapware. General specifications for flow rate regulators.
UNI EN 13434:2022 Devices to prevent pollution by backflow of potable water - Mechanical disconnector, flow actuated - Family G, Type B

Acoustical Society of America (ASA)

ASA C57-1-1933 Normally moving coil type constant current transformer
ASA S12.11-1987(R1997) American National Standard Methods for the Measurement of Noise Emitted by Small Air-Moving Devices

International Electrotechnical Commission (IEC)

IEC 60084:1957 Recommendations for mercury-arc convertors

Thai Industrial Standards Institute (TISI)

TIS 23-1978 Standard for ballast for fluorescent lamps
TIS 92-1974(en) Standard for A.C. Electric Table Type Fan
TIS 868-1989 Standard for alternating current generators (excluding prime movers)
TIS 527-1984 Standard for miniature fuse: fuse-holders
TIS 593-1985 Standard for steel rolling shutters: manual type

American National Standards Institute （ANSI)

ANSI C37.53.1-1989(R1996) American National Standard High-Voltage Current-Limiting Motor-Starter Fuses -- Conference Test Procedures
ANSI/UL 935-2011 Standard for Safety for Fluorescent-Lamp Ballasts
ANSI C82.11-2023 American National Standard for Lamp Ballasts--High-Frequency Fluorescent Lamp Ballasts
ANSI/ANSLG C82.11-2011 American National Standard for Lamp Ballasts--High-Frequency Fluorescent Lamp Ballasts
ANSI C82.13-2020 American National Standard for Lamp Ballasts - Definitions - for Fluorescent Lamps and Ballasts
ANSI/NEMA C136.41-2021 American National Standard for Roadway and Area Lighting Equipment-Interface between an External Locking Type Control Device and Ballast or Driver
ANSI/NEMA C136.41-2024 American National Standard for Roadway and Area Lighting Equipment-Interface between an External Locking Type Control Device and Ballast or Driver
ANSI E1.16-2002 Entertainment Technology - Configuration Standard for Metal-Halide Ballast Power Cables
ANSI/IEEE 287:2007 Standard for Precision Coaxial Connectors (DC to 110 GHz)
ANSI C82.4-2017(R2022) American National Standard for Lamp Ballasts - Ballasts for High-Intensity-Discharge and Low-Pressure Sodium Lamps
ANSI C29.2b-2013 Standard for Insulators - Wet Process Porcelain and Toughened Glass - Transmission Suspension Type
ANSI/CAN/UL/ULC 1201:2018(C2023) Standard for sensor-based backflow prevention systems
ANSI/UL 101-2017 UL Standard for Safety Leakage Current for Appliances (Sixth Edition)
ANSI C82.6-2015(R2020) American National Standard for Lamp Ballasts - Ballasts for High-Intensity Discharge Lamps - Methods of Measurement
ANSI Z21.69a-2012 Standard for Connectors for Movable Gas Appliances (same as CSA 6.16a)
ANSI/UL 1066-2013 Standard for Safety for Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures
ANSI/UL 347-2009 Standard for Medium-Voltage AC Contactors, Controllers, and Control Centres
ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays
ANSI/UL 1029-2012 Standard for Safety for High-Intensity-Discharge Lamp Ballasts
ANSI/IEEE C37.04:1999 Standard Rating Structure for AC High-Voltage Circuit Breakers
ANSI/IEEE 1566:2006 Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger
ANSI/UL 498AA-2013 Standard for Safety for Current Taps and Adapters
ANSI/IEEE C37.13:2008 Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
ANSI C82.17-2017(R2022) American National Standard for Lamp Ballasts -- High Frequency (HF) Electronic Ballasts for Metal Halide Lamps
ANSI/AIAA S-119-2011 Flight Dynamics Model Exchange Standard
ANSI C137.1-2022 American National Standard for Lighting Systems - 0-10V Dimming Interface for LED Drivers, Fluorescent Ballasts, and Controls

Japanese Industrial Standards Committee (JISC)

JIS B 8393:2000 Pneumatic fluid power -- Standard reference atmosphere
JIS B 9932:2003 Hydraulic fluid power -- Calibration of automatic particle counters for liquids
JIS B 9932:2015 Hydraulic fluid power -- Calibration of automatic particle counters for liquids

GCC Standardization Organization

GSO ISO 8778:2015 Pneumatic fluid power -- Standard reference atmosphere
GSO IEC 62219:2014 Overhead electrical conductors - Formed wire, concentric lay, stranded conductors
GSO ASTM D3579:2016 Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
GSO ISO/TR 16144:2015 Hydraulic fluid power -- Calibration of liquid automatic particle counters -- Procedures used to certify the standard reference material SRM 2806

Underwriters Laboratories (UL)

UL 943B-2017 UL Standard for Safety Appliance Leakage-Current Interrupters (Third Edition)
UL 943B BULLETIN-2005 UL Standard for Safety Appliance Leakage-Current Interrupters
UL 101 BULLETIN-2006 UL Standard for Safety Leakage Current for Appliances
UL 60947-4-2-2022 UL Standard for Safety Standard for Low-Voltage Switchgear and Controlgear – Part 4-2: Contactors and Motor- Starters – AC Semiconductor Motor Controllers and Starters
UL 935 BULLETIN-2001 UL Standard for Safety Fluorescent-Lamp Ballasts
UL 935 BULLETIN-2008 UL Standard for Safety Fluorescent-Lamp Ballasts
UL 810B-2021 UL Standard for Safety DC Power Capacitors
UL 1993-2024 STANDARD FOR SAFETY Self-Ballasted Lamps and Lamp Adapters
UL 60947-4-2-2014 UL Standard for Safety Standard for Low-Voltage Switchgear and Controlgear – Part 4-2: Contactors and Motor- Starters – AC Semiconductor Motor Controllers and Starters (First Edition)
UL 2367 BULLETIN-2018 UL Standard for Safety Solid State Overcurrent Protectors
UL 498A BULLETIN-2001 UL Standard for Safety Current Taps and Adapters
UL 498A BULLETIN-2002 UL Standard for Safety Current Taps and Adapters
UL 1029 BULLETIN-2006 UL Standard for Safety High-Intensity-Discharge Lamp Ballasts

Association Francaise de Normalisation

NF E49-301*NF ISO 8778:2018 Pneumatic fluid power - Standard reference atmosphere
NF C63-112:1996 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. PART 4 : CONTACTORS AND MOTOR-STARTERS. SECTION 2 : AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS. (EUROPEAN STANDARD EN 60 947-4-2).

Korean Agency for Technology and Standards (KATS)

KS B ISO 8778-2003(2018) Pneumatic fluid power－Standard reference atmosphere
KS B ISO 8778-2023 Pneumatic fluid power－Standard reference atmosphere
KS B ISO 8778-2003(2023) Pneumatic fluid power－Standard reference atmosphere
KS I ISO 16144-2009(2024) Hydraulic fluid power ― Calibration of liquid automatic particle counters ― Procedures used to certify the standard reference material SRM 2806
KS W 2202-1990 Internal Removable Propulsion Fluid Tanks for Aircraft (Non-Self-Sealings)
KS I ISO 16144-2019 Hydraulic fluid power－Calibration of liquid automatic particle counters－Procedures used to certify the standard reference material SRM 2806
KS B 0541-1995 Fluid systems-Sealing devices-O-rings-Quality acceptance criteria

International Organization for Standardization (ISO)

ISO 8778 Pneumatic fluid power - Standard reference atmosphere

National Standardisation Body (ASRO)

STAS SR ISO 8778:1995 Pneumatic fluid power - Standard reference atmosphere
STAS 12418/5-1986 Pneumatic fluid power Micropneumatic RESTRICTORS Types and basic dimensions

Swedish Institute for Standards

SS-ISO 8778:2003 Pneumatic fluid power - Standard reference atmosphere
SS-EN 14506:2005 Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
SIS CSB-250-1948 Svensk standard
SIS SEN 28 03 00-1974 High-voltage alternating-current circuit-breakers. Survey of standards International recommendations' validity as Swedish standard
SS-ISO 6072:2002 Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 8778:2016 Pneumatic fluid power -- Standard reference atmosphere
BH GSO ASTM D3579:2017 Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
BH GSO ISO/TR 16144:2016 Hydraulic fluid power -- Calibration of liquid automatic particle counters -- Procedures used to certify the standard reference material SRM 2806

National Fire Protection Association (NFPA)

NFPA 87-2023 Standard for Fluid Heaters, 2024 Edition
NFPA 87-2020 Standard for Fluid Heaters, 2021 Edition
NFPA 87-2017 Standard for Fluid Heaters, 2018 Edition
NFPA 87-2021 Standard for Fluid Heaters (Effective Date: 10/25/2020)

U.S. Air Force

AIR FORCE MIL-T-27179 B-1969 TRANSMITTER, RATE OF FLOW, TRU-27/A, ENGINE
AIR FORCE QPL-6599-19-1996 INDICATOR, RATE OF FLOW, FUEL TYPE A-19
AIR FORCE MIL-T-6368 A NOTICE 1-1996 TRANSMITTER, FUEL FLOW, TOTALIZING, TYPE H-1A
AIR FORCE MIL-T-27179 B NOTICE 1-1996 TRANSMITTER, RATE OF FLOW, TRU-27/A, ENGINE
AIR FORCE MIL-T-6368 A ADMIN NOTICE 2-2005 TRANSMITTER, FUEL FLOW, TOTALIZING, TYPE H-1A
AIR FORCE MIL-T-6368 A-1989 TRANSMITTER, FUEL FLOW, TOTALIZING, TYPE H-1A
AIR FORCE MIL-T-27179 B (4)-1994 TRANSMITTER, RATE OF FLOW, TRU-27/A, ENGINE
AIR FORCE QPL-5914-19-1996 INDICATOR RATE OF FLOW, FUEL, TYPE EFU-24/A AND TYPE EFU-25/A

National Electrical Manufacturers Association（NEMA)

NEMA LA-1-1992 Valve type arrester standard
NEMA MG 1 CONDENSED-2007 INFORMATION GUIDE FOR GENERAL PURPOSE INDUSTRIAL AC SMALL AND MEDIUM SQUIRREL-CAGE INDUCTION MOTOR STANDARDS
NEMA C82.4-1992 American National Standard for Ballasts - for High-Intensity-Discharge and Low-Pressure Sodium Lamps (Multiple-Supply Type)

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0641-3 DIN VDE 0641-3-1984*DIN 57641-3:1984 Miniature circuit breakers up to 63 A rated current, up to 415 V a. c. and up to 440 V d. c.
VDE 0664-100-2002 Residual current operated circuit-breakers type B to operate at residual alternating and residual direct currents - Part 100: RCCBs Type B
VDE 0664-401 E*DIN VDE 0664-401:2020-03 Residual current operated circuit-breakers type B with integral overcurrent protection to operate at residual alternating and direct currents for advanced fire prevention - Part 401: RCBO Type B+

Association of German Mechanical Engineers

VDI-MT 5110 BLATT 1-2019 Betriebliches Mobilitaetsmanagement - Qualifikationsmerkmale fuer die Auswahl von befaehigten Personen fuer Mobilitaetsmanagement
VDI 5110 BLATT 1-2018 Betriebliches Mobilitaetsmanagement - Qualifikationsmerkmale fuer die Auswahl von befaehigten Personen fuer Mobilitaetsmanagement
VDI/VDE 3845 Blatt 2-2010 Industrial process control valves - Pneumatic part-turn actuators - Labelling
VDI/VDE 3845 BLATT 2:2011 Actuators for flowing materials — Pneumatic rotary actuators — Marking
VDI 2241 BLATT 2-1984 Switchable externally operated friction clutches and brakes; system-related properties, selection criteria, calculation examples

Electronic Components, Assemblies and Materials Association

ECA EIA-463-B-2003 Fixed Aluminum Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and for Standard Duty (Type 2)

German Institute for Standardization

DIN 472:1981 Circlips (retaining rings) for bores; Normal type and heavy type
DIN 471:1981 Circlips (retaining rings) for shafts; Normal type and heavy type
DIN 472 E:2016-10 Circlips (retaining rings) for bores; Normal type and heavy type
DIN 3771-4:1984-12 Fluid systems; O-rings; quality acceptance criteria
DIN 42404:1985 Terminal markings for small transformers, safety isolating transformers, variable transformers and small chokes

Defense Logistics Agency

DLA MS33534-1953 STANDARD DIMENSIONS FOR STREAMLINE AND OVAL TUBULAR SHAPES
DLA MS33534 VALID NOTICE 3-2004 STANDARD DIMENSIONS FOR STREAMLINE AND OVAL TUBULAR SHAPES
DLA MS33534 NOTICE 2-1999 STANDARD DIMENSIONS FOR STREAMLINE AND OVAL TUBULAR SHAPES
DLA SMD-5962-94640-1994 MICROCIRCUITS, LINEAR, MOSFET DRIVER, HIGH CURRENT, MONOLITHIC SILICON

Compressed Gas Association (U.S.)

CGA E-7-2018 Standard for Medical Gas Pressure Regulators, Flow Meters, and Orifice Flow Selectors

Associação Brasileira de Normas Técnicas

ABNT PB-390-1979 Railway support brakes and their corresponding standardized parameters
ABNT PB-391-1979 Unsupported brakes for railways and their corresponding standardized parameters

United States Navy

NAVY MS17794 NOTICE 1-1997 CRITERIA, JET ELECTRICAL STARTING SYSTEM, DC
NAVY MS17794-1962 CRITERIA, JET ELECTRICAL STARTING SYSTEM, DC
NAVY QPL-7780-QPD-2010 Starter, Electric, Constant Current, DC
NAVY MIL-M-28787/20 A (3)-1992 MODULE, STANDARD ELECTRONIC INVERTER, DIGITAL, KEY CODE LDC

Standard Association of Australia （SAA）

AS C111:1968 Approval and test specification - Miniature overcurrent circuit-breakers
AS 1308:1987 Electric water heaters - Thermostats and thermal cutouts

CN-STDBOOK

图书 3-8735 Heavy machinery standard transmission (below)
图书 3-8733 Heavy Machinery Standards--Transmission (Part 1)

U.S. Military Regulations and Norms

ARMY MIL-R-48212-1973 RESTRICTOR, FLUID FLOW
ARMY MIL-R-48212 NOTICE 2-1995 RESTRICTOR, FLUID FLOW
ARMY A-A-52299 B-2004 LEVELS, SURVEYING: LOCATOR'S, HAND-TYPE
ARMY MIL-S-12653 B-1961 SIGHT, LEAD COMPUTING, AUTOMATIC, M38
ARMY MIL-PRF-44493 A-2006 HEATER, SPACE-CONVECTIVE, SELF-POWERED, LIQUID FUEL, SHC
ARMY MIL-S-12653 B NOTICE 1-1995 SIGHT, LEAD COMPUTING, AUTOMATIC, M38

Government Electronic & Information Technology Association

GEIA EIA_IS-115-1995 CDIF Integrated Meta-model Data Flow Model Subject Area Interim Standard

European Union/Commission

2008/C 13/02-2008 New national face of euro coins intended for circulation
2008/C 89/05-2008 New national face of euro coins intended for circulation
2008/C 89/04-2008 New national face of euro coins intended for circulation

Magyar Szabványügyi Testület

MSZ 4741-1965 Asbestos cement pipe. Flow Pipe Tool Standard

(U.S.) Telecommunications Industries Association

TIA/EIA-604-3A-2000 FOCIS 3 Fiber Optic Connector Intermateability Standard - Standard Type SC

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC TENTSTD12-1973 Suggested Standard for Selenium Surge Suppressors

Danish Standards Foundation

DS/EN 14506:2005 Devices to prevent pollution by backflow of potable water - Automatic diverter - Familiy H, type C
DANSK DS/EN 13434:2022 Devices to prevent pollution by backflow of potable water – Mechanical disconnector, flow actuated – Family G, Type B
DS/ISO 3601-3:1989 Fluid systems. Sealing devices. O-rings. Part 3: Quality acceptance criteria
DANSK DS/INSTA 514:1987 Flexible intermediate bulk containers - Standard duty single-trip FIBCs

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ASTM D3579:2016 Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
OS GSO ISO 10099:2015 Pneumatic fluid power -- Cylinders -- Final examination and acceptance criteria

Conference of European Post Telecommunication (CEPT)

CEPT T/R 21-08 E-1991 Type Approval Procedures and Free Circulation for GSM Mobile Stations

Standards Norway

NS-EN 13434:2021 Devices to prevent pollution by backflow of potable water - Mechanical disconnector, flow actuated - Family G, Type B

Military Standards (MIL-STD)

MIL MIL-R-48212-1973 RESTRICTOR, FLUID FLOW
MIL MIL-E-1/1735-1973 ELECTRONIC TUBE, THYRATRON TYPE 8951 (S/S BY MIL-PRF-1/1735A)
MIL MIL-DTL-62011/2-2009 Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, Side-Mounted Connector, Type II