How often does the system do

How often does the system do, Total:55 items.

The international standard classification for "How often does the system do" includes: Implants for surgery, prosthetics and orthotics , Transfusion, infusion and injection equipment .

The Chinese standard classification for "How often does the system do" includes: Extracorporeal circulation, artificial organ and prosthesis device .

Zhejiang Provincial Standard of the People's Republic of China

DB3308/T 085-2021 Village-level government-bank cooperation "run once at most" service specification
DB3305/T 113-2019 "Run at most once" work specification for the death of the deceased
DB3306/T 012-2018 "Run at most once" job specification

Group Standards of the People's Republic of China

T/ZS 0229-2021 Code of service for urban water supply to "maximum one visit service procedure"
T/CEEIA 343-2018 Evaluation method of multifactor endurance for traction motor’s insulation systems
T/ZS 0004-2018 Code of service for urban water supply to

Professional Standard - Medicine

YY 0948-2015 Cardiopulmonary bypass systems―Arteriovenous cannula for single use
YY/T 1271-2016 Cardiopulmonary bypass systems—Suction catheter for single use
YY 1271-2016 Cardiopulmonary bypass systems―Suction catheter for single use

Professional Standard - Energy

NB/T 11209-2023 Multifactor evaluation method of endurance for electrical insulation systemsunder simultaneous electrical and damp heat stresses

Sichuan Provincial Standard of the People's Republic of China

DB5101/T 40-2018 Government service agencies "run once at most" work specification

AIAG - Automotive Industry Action Group

RC-8-1995 Single and Multi-Use Container Systems Guideline (Version 2)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE SE-99-09-3-1999 Dynamics of Primary/Secondary Chilled Water Systems
ASHRAE CI-01-2-1-2001 Analysis of a Medium-Temperature Secondary Loop Refrigerating System

API - American Petroleum Institute

API RP 53-1978 RECOMMENDED PRACTICES for BLOWOUT PREVENTION EQUIPMENT SYSTEMS (First Edition)
API RP 6G-1978 RECOMMENDED PRACTICE ON THROUGH FLOWLINE (TFL) PUMP DOWN SYSTEMS (First Edition)
API RP 2FP1-1991 DRAFT RECOMMENDED PRACTICE FOR DESIGN@ ANALYSIS@ AND MAINTENANCE OF MOORING FOR FLOATING PRODUCTION SYSTEMS FIRST EDITION
API RP 520-1955 RECOMMENDED PRACTICE FOR THE DESIGN AND CONSTRUCTION OF PRESSURE-RELIEVING SYSTEMS IN REFINERIES (Tentative) (FIRST EDITION)
API RP 17O-2009 Recommended Practice for Subsea High Integrity Pressure Protection Systems (HIPPS) (First Edition)
API RP 2FPS-2001 Recommended Practice for Planning@ Designing@ and Construction Floating Production Systems (First Edition)

GM Global

GMW 15094-2011 Door System - Slam Durability Test Issue 2; English
GMW 15080-2011 Door Window System, Operating Durability Issue 2; English
GMW 15093-2011 Door Hinge System - Check Load and Hinge Cycle Durability Issue 2; English

SCC

AWWA ACE56276 Model Rationing Plan — Be Prepared for the Next Drought
AS 3787.2:1992 General requirements for single-use, sterile, plasticized polyvinyl chloride (PVC) blood packs for whole blood and blood components - Multiple blood pack systems
BHMA A156.28-2018 Recommended Practices for Keying Systems
BHMA A156.28-2007 Recommended Practices for Keying Systems
BHMA A156.28-2023 Recommended Practices for Mechanical Keying Systems
AWWA ACE59865 Where, When and How Many? Water Quality Sampling in Distribution Systems
AWWA ACE68861 Preparing for Change: What Can Proactive Water Systems Do Now?

Standard Association of Australia （SAA）

AS 3787.2:1997 General requirements for single-use, sterile, plasticized polyvinyl chloride (PVC) packs for human blood - Multiple blood pack systems
AS 4086.1:1993 Secondary batteries for use with stand-alone power systems - General requirements

SAE - SAE International

SAE ARP899A-1975 Tube Fittings@ Fluid Systems@ Permanent Type@ General Requirements for

Society of Automotive Engineers (SAE)

SAE ARP899B-2013 Tube Fittings, Fluid Systems, Permanent Type, General Requirements for
SAE ARP899B-1984 Tube Fittings, Fluid Systems, Permanent Type, General Requirements for
SAE J2260-1996 Nonmetallic Fuel System Tubing with One or More Layers

DE-VDA

VDA 4530-2013 Disposable Small Load Carrier (EW-KLT) System

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 1547.6-2011 Recommended Practice for Interconnecting Distributed Resources with Electric Power Systems Distribution Secondary Networks

ANSI - American National Standards Institute

INCITS 220-1992 Information Systems - Digital Information Interchange 130-mm Optical Disk Cartridges of the Write-Once@ Read Multiple (WORM) Type@ Using the Magneto- Optical Effect
X3.220-1992 Information Systems - Digital Information Interchange 130-mm Optical Disk Cartridges of the Write-Once@ Read Multiple (WORM) Type@ Using the Magneto- Optical Effect

IN-BIS

IS 13973-1994 Shaving systems - disposable razors - specification

BHMA - Builders Hardware Manufacturers Association Inc.

A156.28-2000 Recommended Practices for Keying Systems
A156.28-2013 RECOMMENDED PRACTICES FOR MECHANICAL KEYING SYSTEMS
A156.28-2007 RECOMMENDED PRACTICES FOR MECHANICAL KEYING SYSTEMS
A156.28-2018 RECOMMENDED PRACTICES FOR MECHANICAL KEYING SYSTEMS

IETF - Internet Engineering Task Force

RFC 2289-1998 A One-Time Password System (Part of STD 61;Obsoletes: 1938)

British Standards Institution (BSI)

BS EN IEC 63033-1:2022 Multimedia systems and equipment for vehicles. Surround view system - General
BS 3725:1984 Specification for non-returnable multi-ply paper sacks for loose ware potatoes

U.S. Air Force

AIR FORCE MIL-STD-882 D-2000 STANDARD PRACTICE FOR SYSTEM SAFETY

Association Francaise de Normalisation

NF EN 62574:2011 Systèmes audio, vidéo et multimédia - Affectation générale des voies des systèmes audio à voies multiples

American National Standards Institute （ANSI)

ANSI/ASTM E2819:2011 Practice for Single- and MultiI-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL
ANSI/INCITS 220-1992 Information Systems - Digital Information Interchange 130-mm Optical Disk Cartridges of the Write-Once, Read Multiple (WORM) Type, Using the Magneto- Optical Effect Replaces ANSI X3.220-1992 [Replaced: ANSI X3.220]

GM Daewoo

GMKOREA EDS-T-2243-2010 Fatigue Durability PBSL System

(U.S.) Builders Hardware Manufacturers Association

BHMA A156.28-2013 RECOMMENDED PRACTICES FOR MECHANICAL KEYING SYSTEMS

United States Navy

NAVY MIL-STD-3007 E-2006 STANDARD PRACTICE FOR UNIFIED FACILITIES CRITERIA AND UNIFIED FACILITIES GUIDE SPECIFICATIONS

Others: How often does the system do