Industrial Low Temperature Requirements

Industrial Low Temperature Requirements, Total:153 items.

The international standard classification for "Industrial Low Temperature Requirements" includes: Protective gloves , Occupational safety. Industrial hygiene , Ground service and maintenance equipment , Aircraft and space vehicles in general , Meat and meat products , Footwear , Commercial refrigerating appliances .

The Chinese standard classification for "Industrial Low Temperature Requirements" includes: Articles for labor protection , Industrial physical hazard control , Industrial automation and control device in general , Processing technology in general , Transporting, hoisting and filling equipment , Special vehicles , Technical management , Footgear , Refrigeration equipment .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 19802-2005 Non-destructive testing--Industrial radiographic illuminators--Minimum requirements
GB/T 14440-1993 of works in cold environment
GB/T 20098-2006 General technical requirements for protective boot use at low temperature workplace
GB 30439.3-2013 Safety Requirements for Industrial Automation Products - Part 3: Safety Requirements for Temperature Transmitter
GB/T 31209-2014 Green manufacturing―Technical requirements for cryogenic cold air cutting

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2864-2023 Technical requirements for accounting of greenhouse gas emissions from industrial enterprises

Beijing Provincial Standard of the People's Republic of China

DB11/T 3016-2018 Technical requirements for temperature control of low-temperature food storage and transportation
DB11/T 319-2005 Technical specification for low-temperature radiation electroheat membrane heating

Group Standards of the People's Republic of China

T/ZIIC 001-2020 Technical Requirements for Bluetooth Low Energy based Industry IoT Transmission Solution
T/WSJD 61-2024 Hygiene requirements for low-temperature disinfection products
T/CSTE 0005.3-2022 Assessment requirements for sustainable development (green and low carbon) factories— Daily chemical industry
T/CAB 0137-2022 Quality requirements for low-temperature processed luncheon meat
T/ZZLIA 131201-2023 Greenhouse gas emission accounting methods and report requirements for flour milling enterprises
T/CIET 552-2024 Technical requirements for low-temperature denitrification catalyst
T/CNITA 05105-2021 Specification for filter bags for ultra-low emissions of industrial dust

Tianjin Provincial Standard of the People's Republic of China

DB12/T 3016-2018 Technical requirements for temperature control of low-temperature food storage and transportation

Hunan Provincial Standard of the People's Republic of China

DB43/T 2650-2023 General technical requirements for low temperature granary

Professional Standard - Aerospace

QJ 3029-1998 Safety Requirements for Low Temperature Filling System
QJ 1327A-1998 General Requirements for Safety of Low Temperature Tank-truck
QJ 2768-1995 Technical Requirements for Overhaul of Cryogenic Vessels

未注明发布机构

DIN EN 25580 Non-destructive testing; industrial radiographic illuminators; minimum requirements
DIN EN ISO 21028-1 E:2015-03 Toughness requirements for materials at low temperatures for cryogenic vessels Part 1: Temperatures below -80°C (Draft)

Professional Standard - Business

SB/T 10481-2008 Quality safety requirement of pasteurized meat products

Professional Standard - Light Industry

QB/T 2224-2012 Footwear-Performance requirement for uppers low-temperature flexing resistance
QB/T 4886-2015 Footwear. Performance requirement for sole flexing resistance at low-temperature

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40939-2021 General requirements for low temperature medical cold store

Jiangsu Provincial Standard of the People's Republic of China

DB32/ 2037-2012 Requirements for Periodic Inspection of Cryogenic Insulated Gas Cylinders

Shandong Provincial Standard of the People's Republic of China

DB37/T 2857-2016 Technical specifications for industrial thermal application of medium and low temperature solar energy

工业和信息化部

JB/T 13873-2021 Pneumatic cryogenic control valves for industrial-process control systems

PL-PKN

PN E06211-1973 Industrial Iow temperature batch-type electric res?stance furnaces Generals reguirements and tests

CEN - European Committee for Standardization

PREN 17070-2016 Industrial valves - Minimum performance requirements
EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C

British Standards Institution (BSI)

BS EN 12300:1999 Cryogenic vessels - Cleanliness for cryogenic service
BS EN 12300:1999(2008) Cryogenic vessels - Cleanliness for cryogenic service
BS EN ISO 21028-1:2016 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature. Temperatures below -80 C
16/30348709 DC BS EN 17070. Industrial valves. Minimum performance requirements
BS EN 1252-1:1998 Cryogenic vessels. Materials. Toughness requirements for temperatures below -80 C
24/30457738 DC BS EN ISO 21028-1 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
BS EN 1252-2:2001 Cryogenic vessels - Materials - Toughness requirements for temperatures between -80 °C and -20 °C
BS EN 61477:2003 Live working - Minimum requirements for the utilization of tools, devices and equipment
BS EN 61477:2009 Live working. Minimum requirements for the utilization of tools, devices and equipment
BS EN 61477:2002 Live working - Minimum requirements for the utilization of tools, devices and equipment
BS EN ISO 21028-2:2018 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature - Temperatures between -80 degrees C and -20 degrees C
BS EN ISO 5580:2023 Non-destructive testing. Industrial radiographic illuminators. Minimum requirements

Association Francaise de Normalisation

NF E29-338:2022 Industrial valves - Minimum performance requirements
NF EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperatures - Part 1: temperatures below - 80 oC
NF E86-506-1*NF EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1 : temperatures below - 80 oC
NF E86-506-1:1998 Cryogenic vessels. Materials. Part 1 : toughness requirements for temperatures below minus 80 degrees Celsius.
NF A09-210*NF EN 25580:1992 Non-destructive testing. Industrial radiographic illuminators. Minimum requirements.
NF EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for cryogenic temperature materials - Part 2: temperatures between -80 oC and -20 oC
NF C18-477/A1:2005 Live working - Minimum requirements for the utilization of tools, devices and equipment.
NF C18-477/A2:2005 Live working - Minimum requirements for the utilization of tools, devices and equipment.
NF EN 61477:2009 Travaux sous tension - Exigences minimales pour l'utilisation des outils, dispositifs et équipements
NF C18-477:2005 Live working - Minimum requirements for the utilization of tools, devices and equipment.
NF E86-506-2*NF EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2 : temperatures between -80 oC and -20 oC

Korean Agency for Technology and Standards (KATS)

KS M ISO 2252-2008(2013) Rubber footwear, lined industrial, for use at low temperatures
KS B ISO 21028-1-2022 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
KS B ISO 21028-1:2017 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
KS B ISO 21028-1:2006 Cryogenic vessels-Toughness requirements for material at cryogenic temperature-Part 1:Temperatures below-80 ℃
KS B ISO 21028-1-2017(2022) Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
KS M ISO 2252-2021 Rubber footwear, lined industrial, for use at low temperatures
KS B ISO 5580-2001(2021) Non-destructive testing－Industrial radiographic illuminators－Minimum requirements
KS B ISO 5580-2001(2016) Non-destructive testing－Industrial radiographic illuminators－Minimum requirements
KS B ISO 21028-2:2021 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between −80 ℃ and −20 ℃
KS B ISO 21028-2-2006(2016) Cryogenic vessels－Toughness requirements for materials at cryogenic temperature－Part 2：Temperatures between －80 ℃ and －20℃
KS B ISO 5580:2022 Non-destructive testing — Industrial radiographic illuminators —Minimum requirements
KS V ISO 21159:2020 Butterfly valves for use in low temperature applications —Design and testing requirements
KS C IEC 61477:2003 Live working-Minimum requirements for the utilization of tools, devices and equipment
KS C IEC 61477-2020 Live working — Minimum requirements for the utilization of tools, devices and equipment
KS V ISO 18139:2019 Globe valves for use in low temperature applications — Design and testing requirements
KS C IEC 61477:2015 Live working — Minimum requirements for the utilization of tools, devices and equipment
KS B ISO 21028-2:2006 Cryogenic vessels-Toughness requirements for materials at cryogenic temperature-Part 2:Temperatures between -80 ℃ and -20℃

SCC

BS 1510:1958 Steels for use in the chemical, petroleum and allied industries (low temperature supplementary requirements to BS 1501-1506)
DIN EN 17070 E:2017 Draft Document - Industrial valves - Minimum performance requirements; German and English version prEN 17070:2016
VDI 2511-2018 Industrial trucks — Regular inspection, minimum requirements
AENOR UNE-EN ISO 21028-1:2017 Cryogenic containers. Toughness requirements for materials at cryogenic temperature. Part 1: Temperatures below -80 ºC. (ISO 21028-1:2016).
DANSK DS/EN ISO 21028-1:2016 Cryogenic vessels – Toughness requirements for materials at cryogenic temperature – Part 1: Temperatures below -80 °C
UNE-EN 1252-1:1998 CRYOGENIC VESSELS. MATERIALS. PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURE BELOW -80 ºC.
DANSK DS/ISO 5580:1988 Non-destructive testing - Industrial radiographic illuminators - Minimum requirements
CEI EN 61477:2010 Live working - Minimum requirements for the utilization of tools, devices and equipment
IEC 61477:2001+AMD1:2002+AMD2:2004 CSV Live working - Minimum requirements for the utilization of tools, devices and equipment
VDI/VDE 2862-2009 Minimum requirements for the use of screw systems and tools in the automotive industry
DANSK DS/EN 61477:2009 Live working - Minimum requirements for the utilization of tools, devices and equipment
IEC 61477:2001+AMD1:2002 CSV Live working - Minimum requirements for the utilization of tools, devices and equipment
VDI/VDE 2862-2009 Minimum requirements for the use of screw systems and tools in the automotive industry
UNE-EN 61477:2003 Live working - Minimum requirements for the utilization of tools, devices and equipment
DIN EN ISO 21028-1 E:2015 Draft Document - Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C (ISO/DIS 21028-1:2014); German version prEN ISO 21028-1:2014
DANSK DS/EN 25580:1992 Non-destructive testing. Industrial radiographic illuminators. Minimum requirements
NS-EN ISO 21028-1:2016 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 °C (ISO 21028-1:2016)

RU-GOST R

GOST 13130-1983 Post press tool sets for cold plastic working. Technical requirements
GOST 12.4.303-2016 Occupational safety standards system. Protective clothing for low temperatures. Technical requirements
GOST R 12.4.236-2011 Occupational safety standards system. Protective clothing for low temperatures. Technical requirements
GOST R 12.4.236-2007 Occupational safety standards system. Protective clothing for low temperatures. Technical requirements
GOST R 57401-2017 Silicone rubber low temperature vulcanizing low outgassing materials. Technical requirements
GOST IEC 61477-2015 Live working. Minimum requirements for the utilization of tools, devices and equipment
GOST 14894-1969 Thermoelectric standard 2-class and general industry use thermometers for low temperatures. Methods and means of verification

Association of German Mechanical Engineers

VDI 2511-2010 Industrial trucks - Regular checking, minimum requirements

VDI - Verein Deutscher Ingenieure

VDI 2511-1998 Regelmaessige Pruefung von Flurfoerderzeugen - Mindestanforderungen

KR-KS

KS B ISO 21028-1-2017 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
KS B ISO 21028-2-2021 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between −80 ℃ and −20 ℃
KS B ISO 5580-2022 Non-destructive testing — Industrial radiographic illuminators —Minimum requirements
KS V ISO 21159-2020 Butterfly valves for use in low temperature applications —Design and testing requirements
KS V ISO 18139-2019(2024) Globe valves for use in low temperature applications — Design and testing requirements
KS V ISO 18139-2019 Globe valves for use in low temperature applications — Design and testing requirements

European Committee for Standardization (CEN)

EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
prEN ISO 21028-1 rev Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
EN 1252-2:2001 Cryogenic Vessels - Materials - Part 2: Toughness Requirements for Temperatures between -80 degrees C and -20 Degrees C

International Organization for Standardization (ISO)

ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
ISO 21028-1:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C
ISO 21028-2:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between - 80 °C and - 20 °C
ISO/CD 21028-1:2011 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C
ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C
ISO 21009-2:2015 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements
ISO 21009-2:2006 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements
ISO/DIS 5580 Non-destructive testing — Industrial radiographic illuminators — Minimum requirements
ISO/PRF 5580:2011 Non-destructive testing — Industrial radiographic illuminators — Minimum requirements
ISO 5580:1985 Non-destructive testing; Industrial radiographic illuminators; Minimum requirements

RO-ASRO

STAS 4173/2-1991 LOW VOLTA GE FUSES Supplemcntary requirements lor fuses for industrial purposes

German Institute for Standardization

DIN EN ISO 21028-1:2017-01 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016); German version EN ISO 21028-1:2016
DIN 58948-7:2001 Sterilization - Low temperature sterilizers - Part 7: Requirements on the installation and requirements on the service supply for ethylene oxide sterilizers
DIN EN ISO 21028-2:2018-07 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018); German version EN ISO 21028-2:2018
DIN 58948-17:2001 Sterilization - Low temperature sterilizers - Part 17: Requirements on the installation and requirements on the service supply for low temperature steam and formaldehyde sterilizers
DIN EN 25580:1992 Non-destructive testing; industrial radiographic illuminators; minimum requirements (ISO 5580:1985); german version EN 25580:1992

SE-SIS

SIS SS-EN 25 580-1992 Non-destructive testing — Industrial radiographic illuminators — Minimum requirements (ISO 5580:1985)

GSO

BH GSO ISO 21028-1:2017 Cryogenic vessels -- Toughness requirements for materials at cryogenic temperature -- Part 1: Temperatures below -80 degrees C
OS GSO ISO 21028-1:2016 Cryogenic vessels -- Toughness requirements for materials at cryogenic temperature -- Part 1: Temperatures below -80 degrees C
GSO ISO 21028-1:2016 Cryogenic vessels -- Toughness requirements for materials at cryogenic temperature -- Part 1: Temperatures below -80 degrees C
GSO ISO 5580:2013 Non-destructive testing -- Industrial radiographic illuminators -- Minimum requirements
BH GSO ISO 5580:2016 Non-destructive testing -- Industrial radiographic illuminators -- Minimum requirements
GSO ISO 21028-2:2016 Cryogenic vessels -- Toughness requirements for materials at cryogenic temperature -- Part 2: Temperatures between -80 degrees C and -20 degrees C
OS GSO ISO 21028-2:2016 Cryogenic vessels -- Toughness requirements for materials at cryogenic temperature -- Part 2: Temperatures between -80 degrees C and -20 degrees C
BH GSO IEC 61477:2017 Live working - Minimum requirements for the utilization of tools, devices and equipment
GSO IEC 61477:2016 Live working - Minimum requirements for the utilization of tools, devices and equipment
OS GSO IEC 61477:2016 Live working - Minimum requirements for the utilization of tools, devices and equipment
GSO 218:1994 INDUSTRIAL SAFETY AND HEALTH REGULATIONS – ELECTRICAL – PART 2: LOW-VOLTAGE

Indonesia Standards

SNI 7604-2010 Agricultural structures - Requirements for greenhouse

AENOR

UNE-EN ISO 21028-1:2017 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)

SAE - SAE International

SAE J1253-1986 Low Temperature Cranking Load Requirements of an Engine
SAE J1253-1979 Low Temperature Cranking Load Requirements of an Engine

American National Standards Institute （ANSI)

ANSI/SAE J1253-1993 Low Temperature Cranking Load Requirements of an Engine
ANSI/PSAI Z4.1-2016 Sanitation - In Places of Employment - Minimum Requirements

Engineering Equipment and Materials Users Association （EEMUA)

EEMUA PUB NO 192-1998 Guide for the Procurement of Valves for Low Temperature (Non-Cryogenic) Service

EEMUA - Engineering Equipment and Materials Users Association

PUB NO 192-1998 Guide for the Procurement of Valves for Low Temperature (Non-Cryogenic) Service

(U.S.) Ford Automotive Standards

FORD WSB-M18P11-A2-1993 SEALER, LOW TEMPERATURE EXPANDING, PERFORMANCE REQUIREMENTS

International Electrotechnical Commission (IEC)

IEC 61477:2005 Live working - Minimum requirements for the utilization of tools, devices and equipment
IEC 61477:2009 Live working - Minimum requirements for the utilization of tools, devices and equipment
IEC 61477:2002 Live working - Minimum requirements for the utilization of tools, devices and equipment

ES-UNE

UNE-EN 61477:2009 CORR:2011 Live working - Minimum requirements for the utilization of tools, devices and equipment

AT-ON

ONORM EN 25580-1992 Non-destructive testing - Industrial radiographic illuminators -Minimum requirements

Danish Standards Foundation

DS/EN 25580:1992 Non-destructive testing. Industrial radiographic illuminators. Minimum requirements
DS/IEC 269-2:1982 Low-voltage fuses - Part 2: Supplementary requirements f or fuses for industrial applications

IT-UNI

UNI 7642-1976 Low density polyethylene bags for industrial packaging. Requirements and test methods

PT-IPQ

NP EN 10111-2000 Continuously hot-rolled low carbon steel sheet and strip for cold forming Technical delivery conditions

Others: Industrial Test Requirements,Industrial Vehicle Safety Requirements and Validation,Nuclear Industry Purchasing Control Requirements,Industrial Vehicle Safety Requirements and Verification,Industrial low temperature box,Industrial low temperature box,Environmental requirements for industrial buildings,Aviation Industry Requirements,"Industrial Vehicle Safety Requirements and Verification,Industrial Vehicle Safety Requirements and Validation,Low temperature test requirements,industrial low temperature,Equipment low temperature requirements,Technical Requirements for Overhaul of Cryogenic Vessels,Industrial Low Temperature Requirements,Shock Freezer Requirements,industrial emc requirements,Industrial Vehicle Electrical Requirements,Safety requirements for industrial washing machines,Technical Requirements for Industrial Index Demonstration of Mineral Deposits