two-point rate method

two-point rate method, Total:136 items.

The international standard classification for "two-point rate method" includes: Linear and angular measurements , Limits and fits , Paper and board , Glass in general , Measuring instruments , Chemical analysis of metals , Extraction and processing of petroleum and natural gas , Products of the chemical industry in general , Gases for industrial application , Pigments and extenders , Paints and varnishes , Testing of metals , Other materials , Materials for aerospace construction in general .

The Chinese standard classification for "two-point rate method" includes: Basic standards and general methods , Papermaking in general , Industrial technical glass , Measuring tool and instrument , Metal physical property test method , Petroleum development , Basic standards and general methods for dye , Industrial gas and chemical gas , Basic standard and general method for coating , Composite materials and solid fuels , Metal casting and forging materials used for aviation and aerospace .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23144-2023 Paper and board—Determination of bending stiffness—General principles for two-point|| three-point and four-point methods
GB/T 28912-2012 Test method for two phase relative permeability in rock
GB/T 38686-2020 Test method for flexibility of ultrathin glass—Two point bending method
GB/T 4380-2004 Assessment of departure from roundness - Two-and three-point methods
GB/T 1551-1995 Test method for resistivity of silicon and germanium bars using a two-point probe
GB/T 5208-2008 Determination of flash point - Rapid equilibrium closed cup method
GB/T 4469-1984 Test method for the reduction speed of vat dyes--Steam process
GB/T 8177-2024 Internal micrometers with two-point contact
GB/T 4380-1984 Assessment of departure from roundness--Two and three point methods
GB 4469-1984 Test method for the reduction speed of vat dyes－Steam process
GB/T 8177-2004 Internal micrometers with two-point contact
GB/T 23976.1-2009 Dyes—Determination of dyeing rate curve—Method for determination of dye-uptake
GB/T 45133-2025 Gas analysis—The determination of the composition of gas mixtures—Comparison methods based on one-and two-point calibration
GB/T 5208-1985 Coatings; Flash point test; Rapid equilibrium method

Professional Standard - Non-ferrous Metal

YS/T 602-2017 Test method for resistivity of zone-refined germanium ingot using a two-point probe
YS/T 602-2007 Test method for resistivity of zone-refined germanium ingot using a two-point probe

Professional Standard - Aerospace

QJ 2693.2-1994 Test Method for Outgassing Rate of Spacecraft Material - 45~1000 ℃ Gas Output and Outgassing Rate
QJ 2693.1-1994 Test Method for Outgassing Rate of Spacecraft Material - 15-45℃ Outgassing Rate

Military Standard of the People's Republic of China-General Armament Department

GJB 1232-1991 Rate integrating gyroscope test method
GJB 669-1989 Rate Gyroscope Test Method
GJB 669A-2021 Rate Gyroscope Test Method

Professional Standard - Petroleum

SY/T 5345-2007 Test method for relative permeability

Taiwan Provincial Standard of the People's Republic of China

CNS 3104-1988 Calibration Method of Speedometers for Motorcycles
CNS 2732-1983 Calibration Method for Speedometers of Automobiles
CNS 2737-1989 Method of Maximum Speed Test for Automobiles

Professional Standard - Electron

SJ 20481-1995 Measuring methods of power klystrons
SJ 1706-1981 Measurement of electron-beam transmission efficiency of power klystrons
SJ 1712-1981 Measurement of resettability of power klystrons
SJ 1721-1981 Measurement of frequency temperaturre coefficient of power klystrons
SJ 1719-1981 Measurement of oscillation frequency of power klystrons
SJ 1710-1981 Measurement of output power of power klystrons
SJ 1709-1981 Measurement of input power of power klystrons
SJ 1711-1981 Measurement of operating frequency range of power klystrons

Group Standards of the People's Republic of China

T/CMA JD094-2024 Speed and mass tester for two-wheeled electric bicycle
T/FDSA 030-2022 Evaluation method of quick-drying rate and hand feeling of hand sanitizer

Professional Standard - Energy

NB/T 10037-2017 Gas-water relative permeability measurement in coal with unsteady state method

American Society for Testing and Materials (ASTM)

ASTM F397-93(1999) Standard Test Method for Resistivity of Silicon Bars Using a Two-Point Probe
ASTM D5773-20 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D5773-15a Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D5772-15 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D5772-10 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D5773-10 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D5773-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
ASTM D5773-17e1 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
ASTM RR-D02-1510 2001 D5773-Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
ASTM D5772-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
ASTM D5772-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
ASTM RR-D02-1509 2001 D5772-Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
ASTM D5772-20 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
ASTM F397-02 Silicon rod two-electrode probe resistivity test method
ASTM D5772-02 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM E598-96(2002) Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
ASTM E598-08(2015) Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
ASTM E598-96 Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
ASTM RR-E33-1003 1986 E1124-Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
ASTM E598-08(2020) Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
ASTM E598-08 Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading

Austrian Standards

ONORM ISO 4292:1988 Methodsfor the assessment ofdeparture from roundness; measurement by two- and three-point methods

Bureau of Indian Standards

IS 15374-2003 Methods for the Assessment of Departure from Roundness - Measurement by Two- and Three-Point Methods
IS 10407-1998 Automotive vehicles - Two wheelers - Acceleration peformance - Method of Evaluation

Swedish Institute for Standards

SS-ISO 4292:1991 Methods for the assessment of departure from roundness - Measurement by two- and three-point methods
SIS SS-ISO 4292:1991 Methods for the assessment of departure from roundness — Measurement by two- and three-point methods
SS-ISO 5628:2019 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods (ISO 5628:2019, IDT)

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 802.15.3e-2017 IEEE Standard for High Data Rate Wireless Multi-Media Networks--Amendment 1: High-Rate Close Proximity Point-to-Point Communications
IEEE 802.15.3E-2017 High Data Rate Wireless Multi-Media Networks Amendment 1: High-Rate Close Proximity Point-to-Point Communications (IEEE Computer Society)
IEEE P802.15.3E/D07-2016 Draft Standard for High Data Rate Wireless Multi-Media Networks Amendment: High-Rate Close Proximity Point-to- Point Communications (IEEE Computer Society)

Danish Standards Foundation

DS/ISO 4292:1990 Methods for the assessment of departure from roundness - Measurement by two- and three-point methods
DANSK DS/EN ISO 3679:2015 Determination of flash no-flash and flash point – Rapid equilibrium closed cup method
DS/EN ISO 3680:2004 Determination of flash/no flash - Rapid equilibrium closed cup method
DS/EN ISO 3679:2004 Determination of flash point - Rapid equilibrium closed cup method

US Federal Contractor Registration (USFCR)

FCR COE CHL-98-10 FINAL REPORT-1998 JOINT WIND WAVE HEIGHT-FREQUENCY-DIRECTION STATISTICS AT TWO DISPARATE SITES

Korean Agency for Technology and Standards (KATS)

KS M ISO 5628-2023 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
KS R 1028-1996(2001) MOTORCYCLES-METHOD OF MAXIMUM SPEED TEST
KS R 1028-1986 MOTORCYCLES-METHOD OF MAXIMUM SPEED TEST
KS B 0892-1985 Method of deposition rate measurement
KS B 0892-2016 Method of deposition rate measurement
KS B ISO 4292-2014 Methods for the assessment of departure from roundness — Measurement by two-and three-point methods
KS R 5031-2003(2008) IGNITION COILS FOR MOTORCYCLES
KS M ISO 3679:2003 Paints, varnishes, petroleum and related products－Determination of flashpoint－Rapid equilibrium method

Association Francaise de Normalisation

NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
NF R14-316:1959 Reflectors. Two point attachment.
NF T60-616*NF EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method
NF EN ISO 3679:2004 Determination of flash point - Rapid equilibrium closed cup method
NF T60-616:2004 Determination of flash point - Rapid equilibrium closed cup method.

British Standards Institution (BSI)

BS ISO 5628:2019 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS EN ISO 3679:2015 Determination of flash no-flash and flash point. Rapid equilibrium closed cup method
BS 6664-4:1991 Flashpoint of petroleum and related products-Method for determination of flashpoint (rapid equilibrium method)

International Organization for Standardization (ISO)

ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO 3679:2004 Determination of flash point - Rapid equilibrium closed cup method
ISO 3679:1976 Title missing - Legacy paper document

National Standardisation Body (ASRO)

STAS 12421/2-1986 DIRECT DRIVE RATIO CONTROL-LERS FOR FIRING PLANTS

Electrostatic Discharge Association (ESDA)

ESD DSTM11.13:2009 Two-Point Resistance Measurement
ESD ANSI/ESD STM11.13-2004 Two-Point Resistance Measurement
ESD STM11.13-2004 Two Point Resistance Measurement
ESD STM11.13-2015 Two Point Resistance Measurement

Defense Logistics Agency

DLA SMD-5962-01507-2001 MICROCIRCUIT, DIGITAL, BIPOLAR, HIGH-SPEED LOOK-AHEAD CARRY GENERATOR, MONOLITHIC SILICON
DLA QPL-9398-15 NOTICE 1-2008 Generator, Tachometer, Two-Pole, High Temperature, Aircraft
DLA QPL-9398-QPD-2010 GENERATOR, TACHOMETER, TWO-POLE, HIGH TEMPERATURE, AIRCRAFT
DLA QPL-9398-QPD-2009 GENERATOR, TACHOMETER, TWO-POLE, HIGH TEMPERATURE, AIRCRAFT
DLA QPL-9398-2013 Generator, Tachometer, Two-Pole, High Temperature, Aircraft
DLA MS75075 REV D-2005 SWITCH, TOGGLE, TWO POLE, UNSEALED
DLA MIL-C-55243 NOTICE 2-1999 CONNECTORS, PLUGS AND RECEPTACLES, ELECTRICAL, QUICK CONNECT AND DISCONNECT, 12 CONTACTS, MEDIUM POWER
DLA MIL-C-55243-1963 CONNECTORS, PLUGS AND RECEPTACLES, ELECTRICAL, QUICK CONNECT AND DISCONNECT, 12 CONTACTS, MEDIUM POWER

GCC Standardization Organization

GSO ASTM D5772:2023 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
GSO ASTM D5773:2023 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
GSO ISO 3679:2016 Determination of flash no-flash and flash point -- Rapid equilibrium closed cup method
GSO ISO 3680:2008 Determination of flash/no flash point – Rapid equilibrium closed cup method

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ASTM D5772:2023 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
BH GSO ASTM D5773:2023 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
BH GSO ISO 3680:2024 Determination of flash/no flash point – Rapid equilibrium closed cup method
BH GSO ISO 3679:2017 Determination of flash no-flash and flash point -- Rapid equilibrium closed cup method

Spanish Association for Standardization (UNE)

UNE 66056:1978 ESTIMATION OF THE RATIO OF TWO VARIANCES OR OF TWO STANDARD DEVIATIONS
UNE-EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
AENOR UNE-EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)

Society of Automotive Engineers (SAE)

SAE AS8016A-1996 Vertical Velocity Instrument (Rate-of- Climb)

National Association of Corrosion Engineers (NACE)

NACE Paper 00011-1997 Sweet spot corrosion rate model in transverse multiphase slug flow

Japanese Industrial Standards Committee (JISC)

JIS D 1035:1994 Mopeds and motorcycles -- Method of acceleration test
JIS D 1032:1994 Mopeds and motorcycles -- Speedometers -- Methods of Calibration

Gosstandart of Russia

GOST R 71894-2024 Electric low-speed two-wheel vehicles. Technical requirements and test methods

Indonesia Standards

SNI 19-6745-2002 Metode penentuan posisi titik perum menggunakan dua buah sextant

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 3680:2008 Determination of flash/no flash point – Rapid equilibrium closed cup method

American Society of Civil Engineers (ASCE)

ASCE 21-98-1999 Automated People Mover Standards - Part 2: Vehicles Propulsion and Braking
ASCE 21-96-1997 Automated People Mover Standards - Part 1

German Institute for Standardization

DIN 53350:2022 Plastics films and sheeting - Determination of stiffness in bending - Two-point method (Ohlsen approach)
DIN 53350 E:2022-05 Draft Document - Plastics films and sheeting - Determination of stiffness in bending - Two-point method (Ohlsen approach)
DIN EN ISO 3680:2004-07 Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004)
DIN EN 50193-2-2 E:2013 Draft Document - Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point of use electric instantaneous showers - Efficiency; German version prEN 50193-2-2:2013

Standards Norway

NS-EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)

Association of German Mechanical Engineers

VDI/VDE 2189 BLATT 1-1970 Description and investigation of two- and multi-point controllers without feedback

Standards Institution of Israel

S.I.662-1967 TESTING OF MILK: DETERMINATION OF THE FREEZING POINT (RAPID METHOD)

European Committee for Standardization (CEN)

EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
EN ISO 3679:2022 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022)

National Aeronautics and Space Administration (NASA)

NASA NACA-RM-A9F16-1949 A comparison of two submerged inlets at subsonic and transonic speeds