YS/T 602-2007 in English

SUPERSEDED

Test method for resistivity of zone-refined germanium ingot using a two-point probe

Issued on:2007-11-14
Implemented on:2008-05-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $70.00
$68.00

Standard No:	YS/T 602-2007
Document status:	SUPERSEDED
Superseded by:	YS/T 602-2017 Test method for resistivity of zone-refined germanium ingot using a two-point probe
Superseded on:	2018-01-01
Title in English:	Test method for resistivity of zone-refined germanium ingot using a two-point probe
Title in Chinese:	区熔锗锭电阻率测试方法——两探针法
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	2007-11-14
Implemented on:	2008-05-01
ICS Classification:	77.040-Testing of metals
Chinese Classification:	H21-Metal physical property test method
Professional Classification:	YS-Non-ferrous Metal
Related Keywords:	zone-refined germanium ingot molten germanium ingot changes molten germanium ingots zone-melted germanium ingots primary zone-melted germanium ingots
Related Topics:	Resistivity probe germanium Resistivity test tga test two methods probe method ys/t622-2007 ys/t602- Measuring Probes for Resistivity ys/t647-2007 southern probe Test probe use Resistivity test Probe Impedance Probe Test System Resistivity Test Method two-probe method probe current Probe Test Equipment There are two ways to measure cod Two Probe Tester probe method Probe Method Curve Explore Zone melting germanium ingot current probe 2 million probes electric pair probe probe current ys t 628 2007 degree test probe Two Sequencing Methods How to use the probe two-point probe method ion probe method two-point rate method Resistivity Test Method Test Probe Surface Electron Probe Resolution current probe Mechanical probe measurement Principle of square resistance test with four probes Steps for measuring resistance using the four-probe method Ground resistance test potential probe Apparent resistivity test National standard resistivity test Conductivity probe installation method Wire resistivity test Related to resistance probes Cable Resistivity Test Standard four-probe method for measuring resistance Resistivity detection technology Four-probe method for testing resistivity Probe qualitative detection method Test method for resistivity in wastewater Dual-electric four-probe test method Soil Resistivity Test Method Soil Resistivity Test Method How to study photosynthetic rate Four-probe method for measuring resistivity Classification of probe labeling methods Two ways to measure conductivity Probe labeling method ys/t308-2007 ys/t534-2007 Electron probe preparation method Resistivity method to measure conductivity Electronic probe chemical dating Electronic probe testing industry Northwestern University Electron Probe Test Method Bed of Nails Test Probes

本标准规定了用直流两探针法测量区熔锗锭的电阻率。
本标准适用于测量GB/T 11071《区熔锗锭》规定的用梯形舟生产的原生区熔锗锭的电阻率，电阻
率测量范围为０．１Ω·ｃｍ～１００Ω·ｃｍ。
本标准要求区熔锗锭被测量部分的横截面积沿锭长变化梯度线性，且锭的长度必须大于横截面的
最大尺寸和探针间距三倍以上。

Scope

This standard specifies the use of the DC two-probe method to measure the resistivity of molten germanium ingots. This standard is suitable for measuring the resistivity of primary zone-melted germanium ingots produced by trapezoidal boats as specified in GB/T 11071 "Zone-melted Germanium Ingots". The resistivity measurement range is 0.1Ω·cm~100Ω·cm. This standard requires that the cross-sectional area of the measured part of the molten germanium ingot changes linearly along the length of the ingot, and the length of the ingot must be greater than three times the maximum size of the cross-section and the probe spacing.

More samples: QC/T 942-2021 YD/T 3934-2021 GB 18306-2015

Sample only — not a preview of YS/T 602-2007

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

YS/T 1166-2016 in English

Determination method of infrared transmittance of high-purity germanium tetrachloride
2016-07-11
YS/T 26-2016 in English

Test methods for edge contour of silicon wafers
2016-07-11

YS/T 602-2007 in English

Test method for resistivity of zone-refined germanium ingot using a two-point probe

We also recommend

YS/T 1166-2016 in English

YS/T 26-2016 in English