plasticity test method

plasticity test method, Total:200 items.

The international standard classification for "plasticity test method" includes: Refractories , Plastics , Plastics pipes, fittings and valves , Plastics in general , Hoses and hose assemblies , Relays , Reinforced plastics , Ignitability and burning behaviour of materials and products , Footwear .

The Chinese standard classification for "plasticity test method" includes: Argillaceous and high alumina fire resistance , Basic standards and general methods for synthetic resin and plastic , Plastic profile , Synthetic resin and plastic , Rubber tube, rubber belt and tape , Control relay , Fibre reinforced composites , Footgear .

Professional Standard - Ferrous Metallurgy

YB/T 5118-1993 Test method for strength fo fireclay and high alumina plastic refractories
YB/T 5119-1993 Test method for workability index of fireclay and high alumina palstic refractories

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1033-1986 Test method for density and relative density of plastics
GB/T 14484-1993 Test methods for bearing strength of plastics
GB/T 1463-2005 Test methods for density and relative density of fiber reinforced plastics
GB/T 3854-2005 Test method for hardness of reinforced plastics by means of Barcol impresser
GB/T 10007-2008 Rigid cellular plastics - Determination of shear strength
GB/T 44580-2024 Thermoplastics valves—Fatigue strength—Test method
GB/Z 22074-2008 Reliability test method for moulded case circuit-breakers
GB/T 1463-1988 Test methods for density and relative density of fiber reinforced plastics
GB/T 15598-1995 Testing methods for shear strength of plastics by punch tool
GB/T 9342-1988 Plastics-Determination of hardness by the ball indentation method
GB/T 15907-2008 Rubber and plastics hoses - Method of test for flammability
GB 2410-1980 Transparent plastics;Transmissivity and haze test
GB 1033-1986 Test method for density and relative density of plastics
GB/T 3398-1982 Test for hardness of plastics by the ball indentation
GB 8323-1987 Test method for flammability of plastics－Smoke density test
GB/T 5470-1985 Test method for brittleness temperature of plastics by impact
GB 2913-1982 Test for whiteness of plastics
GB/T 2411-1980 Plastics--Shore hardness test
GB/T 2576-1989 Test method for insoluble matter content of resin used in fiber reinforced plastics
GB/T 2913-1982 Test for whiteness of plastics
GB/Z 22074-2016 Reliability test method for moulded-case circuit-breakers
GB/T 1636-1979 Test method for apparent density of moulding plastic materials
GB/T 2410-1980 Transparent plastics--Transmissivity and haze test
GB/T 8323-1987 Test method for flammability of plastics; Smoke density test
GB/T 3854-2017 Test method for hardness of reinforced plasticsby means of a Barcol impresser
GB/T 10007-1988 Cellular plastics--Determination of shear strength of rigid materials

Professional Standard - Chemical Industry

HG/T 3839-2006 Testing methods for shear strength of plastics by punch tool
HG/T 2872-2009 Cellular material for rubber - Plastics shoes - Determination of apparent density
HG/T 2872-1997 Cellular material for rubber-plastics shoes-Determination of apparent density
HG/T 3213-2018 Test method for drop impact strength of plastic tower packing

Taiwan Provincial Standard of the People's Republic of China

CNS 13786-1996 Method of Test for Brittleness Temperature of Plastics
CNS 10275-1983 Method of Test for William Plasticity of Unvulcanized Rubber
CNS 13332-1994 Method of Test for Rookwell Hardness of Plastics
CNS 3235-1971 Method of Test for Fineness of Plastics Powder
CNS 11422-1985 Method of Test for Refractoriness of Fireclay Plastic Refractories

Professional Standard - Machinery

JB/T 10711-2007 Reliability test method of moulded case circuit-breakers

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1545-2015 Test method for inclined plane impact of movable plastic trash can

Professional Standard - Aerospace

QJ 2199-1991 Test method for flexural strength of rigid foamed plastics

Group Standards of the People's Republic of China

T/CAB 0111-2021 Test method for sheets spreading capability of folding carton sheets

Japanese Industrial Standards Committee (JISC)

JIS K 6814:2008 Thermoplastics pipes -- Thermal reversion test method
JIS K 7202:1995 Method of rockwell hardness test for plastics
JIS K 7202:1982 Plastic Rockwell hardness test method JISK7202-1982
JIS R 2574:1991 Testing method for workability index of fireclay plastic
JIS Z 8818:2002 Test method for minimum explosible concentration of combustible dusts
JIS K 6253:1997 Hardness testing methods for rubber, vulcanized or thermoplastic
JIS K 6300-3:2019 Rubber, unvulcanized -- Physical testing methods -- Part 3: Determination of plasticity and plasticity retention index (PRI) with rapid-plastimeter
JIS K 7130:1992 Testing methods for thickness of plastic film and sheeting
JIS K 6300-3:2001 Rubber, unvulcanized -- Physical testing methods -- Part 3: Determination of plasticity and plasticity retention index (PRI) with rapid-plastimeter
JIS K 6404-16:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 16: Colour fastness test method
JIS K 7106:1995 Testing method for stiffness of plastics by means of a cantilever beam
JIS K 6816:2008 Thermoplastics pipes and fittings -- Test method for Vicat softening temperature

British Standards Institution (BSI)

BS 2782-4 METHOD 401:1958 Methods of testing plastics. Method 401 Acetone soluble matter
BS 2782-1:1956 Methods of testing plastics. Effect of temperature
BS EN ISO 8659:2020 Thermoplastics valves. Fatigue strength. Test method
BS 2782-4:1958 Methods of testing plastics. Analytical methods and viscosity solution
BS 2782-3 METHOD 306 TO 307:1957 Methods of testing plastics. Methods 306 and 307 Impact strength, indentation tests
BS EN 28659:1992 Thermoplastics valves - Fatigue strength - Test method
BS 4554:1970 Method of test for wettability of textile fabrics
BS 2782-2 METHOD 201:1957 Methods of testing plastics. Electrical properties Method 201 electric strength
BS 2782-10 Method 1001:1977 Methods of testing plastics - Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
BS 2782-5 METHOD 501:1958 Methods of testing plastics. Methods 501 apparent density and bulk factor of moulding materials
BS 2782-3 METHOD 301:1957 Methods of testing plastics. Method 301 tensile strength and elongation at break
BS 2782-5 METHOD 508:1958 Methods of testing plastics. Methods 508 flammability
BS 2782-3 Method 365A:1976 Methods of testing plastics - Mechanical properties - Determination of softness number of flexible plastics materials
BS 2782-1 METHOD 140D:1980 Methods of testing plastics. Thermal properties-Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method)

Standard Association of Australia （SAA）

AS 4828.4:2008 Degradability of plastics - Methods of test - Test method for heat aging of degradable plastics
AS K94.1:1960 Methods of testing plastics, Part 1: Effect of temperature
AS K94.4:1962 Methods of testing plastics, Part 4: Analytical methods and viscosity in solution

American National Standards Institute （ANSI)

ANSI/ASTM D1895:1997 Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
ANSI/ASTM D953:1992 Test Method for Bearing Strength of Plastics (08.01)
ANSI/ASTM F2433:2009 Test Method For Determining Thermoplastic Pipe Wall Stiffness

Korean Agency for Technology and Standards (KATS)

KS M 6898-1987 Testing method for set in lasting with the dome plasticity apparatus
KS M 3037-1983(1998) METHOD ROCKWELL HARDNESS TEST FOR PLASTICS
KS M 3019-1982 Testing methods for shear strength of plastics by punch tool
KS M 3816-1982 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF PLASTICS
KS M 3816-1997 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF PLASTICS
KS M 6898-2002 Testing method for set in lasting with the dome plasticity apparatus
KS M 3037-1983 METHOD ROCKWELL HARDNESS TEST FOR PLASTICS
KS M 3019-2008 Testing methods for shear strength of plastics by punch tool
KS M ISO 8030:2018 Rubber and plastics hoses — Method of test for flammability
KS M ISO 8030-2023 Rubber and plastics hoses — Method of test for flammability
KS T 1352-2023 Returnable transport packaging — Testing for plastic boxes
KS M ISO 8030-2018 Rubber and plastics hoses — Method of test for flammability
KS M 3016-2011 Testing method of the density and specific gravity for plastics
KS M 3030-1980 DETERMINATION OF FLAMMABILITY AND BURNING RATE OF PLASTICS IN THE FORM OF FILM
KS M 3030-1980(2001) DETERMINATION OF FLAMMABILITY AND BURNING RATE OF PLASTICS IN THE FORM OF FILM
KS T 1317-1976 Test for impact resistance of plastic film
KS K 0580-1985 Test method for flammability of cloth(45° Angle method)
KS K 0580-2006 Test method for flammability of cloth(45° Angle method)
KS M 3089-1994 Testing method for thickness of plastic film and sheeting
KS L 4005-2006 Sieve analysis of nonplastic ceramic materials
KS L 3504-2008 Testing method for grain size of castable refractories
KS T 1317-2014 Test for impact resistance of plastic film
KS K 0586-2011 Test method for flammability of cloth: Burning rate test
KS M 3080-1995 Testing method for colour fastness of plastics upon exposure to light of the carbon arc
KS M 3089-2013 Testing method for thickness of plastic film and sheeting
KS M ISO 7686:2016 Plastics pipes and fittings－Opacity－Test method
KS M 3047-2008 Methods for the analysis of evolved gases concentration by burning of plastics
KS L 3504-1973 Testing method for grain size of castable refractories
KS M ISO 7686:2003 Plastics pipes and fittings-Opacity-Test method
KS M ISO 7686-2016 Plastics pipes and fittings－Opacity－Test method
KS M 3065-1982 TESTING MATHOD FOR DEFLECTION TEMPERATURE OF RIGID PLASTICS UNDER LOAD
KS F 2397-2005(2010) Standard test method for density of drained asphalt mixtures
KS M 3061-2008(2013) Testing method for stiffness of plastics by means of a cantilever beam
KS M ISO 7686-2016(2021) Plastics pipes and fittings－Opacity－Test method
KS M 6784-2009 Hardness testing methods for rubber, vulcanized or thermoplastic
KS M 3038-2013 Test method for tensile heat distortion temperature of plastic sheeting
KS M 3059-2008 Test method for brittleness temperature of plastics and elastomers by impact

Ente Nazionale Italiano di Unificazione

UNI EN ISO 8030:1999 Rubber and plastic hoses - Method of test for flammability
UNI EN ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability
UNI 10785:1999 Compostability of plastics - Requirements and test methods
UNI EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method
UNI EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
UNI EN 13513:2002 Footwear - Test methods for uppers - Deformability

American Society for Testing and Materials (ASTM)

ASTM D1925-70(1988)e1 Test Method for Yellowness Index of Plastics
ASTM D1895-96(2010) Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
ASTM D1505-85(1990)e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D1505-98e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM RR-D20-1273 2018 D0953-Test Method for Pin-Bearing Strength of Plastics
ASTM D1505-03 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D1746-09 Standard Test Method for Transparency of Plastic Sheeting
ASTM D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D953-95 Standard Test Method for Bearing Strength of Plastics
ASTM D953-09 Standard Test Method for Bearing Strength of Plastics
ASTM D1043-99 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1043-16 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1043-09 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D7735-11(2016) Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
ASTM D1895-24 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
ASTM D953-10 Standard Test Method for Bearing Strength of Plastics
ASTM D953-02 Standard Test Method for Bearing Strength of Plastics
ASTM D1746-15 Standard Test Method for Transparency of Plastic Sheeting
ASTM D1895-96(2003) Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
ASTM D1043-02 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D953-18 Standard Test Method for Pin-Bearing Strength of Plastics
ASTM D953-19 Standard Test Method for Pin-Bearing Strength of Plastics
ASTM D1895-96 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
ASTM D1895-96(2010)e1 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
ASTM E1515-03 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM RR-D20-1260 2013 D1929-Test Method for Determining Ignition Temperature of Plastics
ASTM D5492-06 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
ASTM RR-D20-1274 2019 D1929-Test Method for Determining Ignition Temperature of Plastics
ASTM D1921-06e1 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D1180-57(1976) Method of Test for Bursting Strength of Round Rigid Plastic Tubing
ASTM D5492-98 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
ASTM D1929-14 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1043-16(2024) Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1505-25 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM F2433-05(2013) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
ASTM D1929-23 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D4508-06 Standard Test Method for Chip Impact Strength of Plastics
ASTM F2433-05 Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
ASTM D1505-68(1979) Standard Test Method for Density Of Plastics By The Density-Gradient Technique

GM Daewoo

GMKOREA EDS-T-7523-2011 Test Method for the Pencil Hardness of Plastics

European Committee for Standardization (CEN)

EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
EN 28659:1990 Thermoplastics Valves - Fatigue Strength - Test Method

Association Francaise de Normalisation

NF T54-084*NF EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method
NF EN ISO 8030:2014 Rubber and plastic hoses - Flammability test method
NF T47-214:1998 Rubber and plastics hoses - Method of test for flammability.
NF T47-214*NF EN ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability

International Organization for Standardization (ISO)

ISO 8659:1989 Thermoplastics valves; fatigue strength; test method
ISO 8659:2020 Thermoplastics valves — Fatigue strength — Test method
ISO 7686:1992 Plastics pipes and fittings; opacity; test method

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 8659:2013 Thermoplastics valves - Fatigue strength - Test method
OS GSO ISO 8030:2015 Rubber and plastics hoses -- Method of test for flammability

Danish Standards Foundation

DANSK DS/ISO 8659:2020 Thermoplastics valves – Fatigue strength – Test method
DANSK DS/EN ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability
DANSK DS/EN ISO 8659:2020 Thermoplastics valves – Fatigue strength – Test method
DS/EN ISO 8030:1998 Rubber and plastics hoses - Method of test for flammability
DANSK DS/ISO/PAS 24499:2024 Method of test for burning velocity measurement of A2L flammable gases

GCC Standardization Organization

GSO ISO 8030:2015 Rubber and plastics hoses -- Method of test for flammability
GSO ISO 8659:2013 Thermoplastics valves - Fatigue strength - Test method
OS GSO ISO 2505:2024 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
GSO ISO 13774:2014 Rubber and plastics hoses for fuels for internal-combustion engines -- Method of test for flammability

Swedish Institute for Standards

SS-ISO 8659:1991 Thermoplastic valves - Fatigue strength - Test methods
SIS 20 03 09 plastic. experiment method. Leakage current intensity
SS-EN 28659:1991 Thermoplastic valves - Fatigue strength - Test method
SS-EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
SIS 20 03 12 plastic. Test Methods. Visible analysis
SIS PR 20 04 04 experiment method. Tear strength of plastic fiber cages
SS-EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
SS-EN ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)
SIS 20 03 07 plastic. Test Methods. density

Belgian Standards Institute

NBN-EN 28659-1992 Thermoplastic valves - Fatigue strength - Test method

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 8659:2016 Thermoplastics valves - Fatigue strength - Test method

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 1462.21:1997 Methods of test for plastics pipes and fittings - Method for determination of bond strength

German Institute for Standardization

DIN EN 28659:1991 Thermoplastic valves; fatigue strength; test method (ISO 8659:1989); german version EN 28659:1990
DIN DVS 2201-2:1985 Testing of semi-finished products of thermoplastics:Weldability Test methods – Requirements
DIN 55543-1:1986 Packaging test; test methods for plastic sacks; determination of the film thickness
DIN EN 12061:1999-03 Plastics piping systems - Thermoplastics fittings - Test method for impact strength
DIN EN ISO 8030:1998-02 Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995)

Gosstandart of Russia

GOST 24649-1981 Plastic electrical insulating laminates. Method of test for punching ability

Türk Standardları Enstitüsü

TS 1066-1972 STANDARD METHOD OF TEST FOR FLAMMABILITY OF ?ELF - SUPPORTING PLASTICS
TS 1855-1975 RIGID CELLULAR PLASTICS - DETERMINATION OF SHEAR STRENGTH

Austrian Standards

ONORM EN 28659-1991 Thermoplastlcs valves - Fatigue strength - Test method (ISO 8659:1989)

Cuban Institute of Standards and Metrology

NC 30-63-1987 Plastics. Determination of Plasticizer Migration Testinq Method

Polski Komitet Normalizacyjny (PKN)

PN C89055-1986 Plastic foils Methods of testing resistance to low temperatures

Spanish Association for Standardization (UNE)

UNE-EN ISO 8030:1998 RUBBER AND PLASTICS HOSES . METHODS OF TEST FOR FLAMMABILITY. (ISO 8030:1995).

Others: Power-law models. Goodness-of-fit tests and estimation methods,Standard test method for cone penetration of grease,Test method for needle penetration of petroleum wax,Separation test method,Concrete Penetration Test Method,Test method for cleanliness of adhesives used in optical instruments,Standard test method for sampling and fineness of pulverized coal,Test method for cone penetration of aviation liquid gaskets,test method for wettability of glass substrate materials,method accuracy test,Test Method Accuracy,Standard Test Method for Dispersion of Carbon Black in Rubber,Test method for electrostatic sensitivity of industrial electric detonators,Whiteness test method,Cleanliness test method,Maturity test method for electrical and electronic products,plasticity test method,Test method for plastic corrosion,Evaluate the accuracy of the test method,Test method for light transmittance and haze of transparent plastics