Cryl phenyl benzonitrile

Cryl phenyl benzonitrile, Total:189 items.

The international standard classification for "Cryl phenyl benzonitrile" includes: Equipment for the chemical industry , Surface active agents , Thermoplastic materials , food products in general , Organic nitrogen compounds , Plastics , Raw materials for rubber and plastics , Plastics pipes, fittings and valves , Protection against crime .

The Chinese standard classification for "Cryl phenyl benzonitrile" includes: Non-metal chemical machinery equipment , General organic chemicals , Synthetic resin and plastic , Food sanitation , Basic standards and general methods for synthetic resin and plastic , Plastic profile , Crime judging technology .

Group Standards of the People's Republic of China

T/JGWS 3-2021 Reinforced recycled acrylonitrile-butadiene-styrene compound
T/CAFFCI 35-2019 2-cyclohexylidene-2-phenyl-acetonitrile （Peonile）
T/NBSL 002-2022 Flame Retardant ABS
T/CDIA 0014-2020 Environmentally friendly 3-[benzyl(phenyl)amino]propanenitrile
T/CDIA 0063-2023 1,2-Dicyanobenzene
T/JSBC 3-2020 Flame retardant recycled acrylonitrile-butadiene-styrene compound
T/GDPIA 39-2021 Paint-free acrylonitrile-butadiene-styrene (ABS) material
T/ZZB 1674-2020 Acrylonitrile-Butadiene-Styrene（ABS） children's building block toys

Professional Standard - Chemical Industry

HG/T 4466-2012 Bromoxynil Octanoate Technical Material
HG/T 21561-1994（编制说明） Acrylonitrile Butadiene Styrene (ABS) Pipe and Fittings
HG/T 21561-1994 The ABS pipes and fittings series
HG/T 5285-2017 N-Phenylglycinonitrile
HG/T 4467-2012 Bromoxynil Octanoate Emulsifiable Concentrates
HG/T 4775-2014 4-Ethyl biphenyl-4-carbonitrile
HG/T 2425-1993 Tri(4-Isopropylphenyl) Phosphate
HG/T 6146-2023 Industrial isophthalonitrile
HG/T 5490-2018 o-Chlorobenzonitrile

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7717.15-2018 Acrylonitrile for industrial use—Part 15：Determination of concent of p-hydroxylanisole
GB/T 5009.152-2003 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for foods pack
GB/T 10009-1988 Acrylonitrile--Butadiene--Styrene (ABS) plastics extrusion plates
GB/T 17338-1998 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for food packaging
GB 12672-1990 Acrylonitrile-butadiene-styrene (ABS) resin
GB/T 8661-1988 Determination of residual acrylonitrile monomer content in acrylonitrile-butadiene-styrene resin by gas chromatography
GB/T 12672-2009 Acrylonitrile-butadiene-styrene(ABS)resin
GB/T 37427-2019 Plastics—Acrylonitrile-butadiene-styrene(ABS) compound for automobile
GB/T 31403-2015 Plastics―Acrylonitrile-butadiene-styrene/poly(methyl methacrylate) alloy
GB/T 16867-1997 Determination of residual styrene monomer in polystyrene and acrylonitrile-Butadiene-Styrene resins by gas chromatography
GB/T 8661-2008 Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method

Professional Standard - Light Industry

QB/T 2029-1994 ABS/PVC Sheet Material
QB/T 2894-2007 Acrylonitrile-butadiene-styrene(ABS) color masterbatch

未注明发布机构

FORD WSS-M4D833-B1-2013 ACRYLONITRILE STYRENE ACRYLATE (ASA), EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

Professional Standard - Public Safety Standards

GA/T 1653-2019 Forensic sciences—Examination methods for chloracetophenone and o-chlorobenzalmalononitrile in tear agent samples—GC-MS

Professional Standard - Petrochemical Industry

SH 1504-1992 Acrylonitrile-Butadiene-Styrene (ABS) Molding and Extrusion Compound Nomenclature
SH 1540-1993 Styrene/Acrylonitrile (SAN) Copolymer Molding and Extrusion Nomenclature

GM Europe

GME QK 000223-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000222-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000225-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000224-1996 Styrol-Acrylnitril-Copolymerisat mit Glasfasern Styrene-Acrylonitrile-Copolymer with Glass Fibres English Translation Available
GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)
GME QK 001244-1998 Acrylnitril-Butadien-Styrol-Terpolymerisat Methylmethacrylate-Acrylonitrile-Butadiene-Styrene-Polymer English Translation Available
GME QK 000221-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English Translation Available
GME QK 000220-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English Translation Available
GME QK 000242-2009 Acrylic Ester-Styrene-Acrylonitrile-Terpolymer (English/German)
GME QK 000172-2005 Acrylate-Styrene-Acrylonitrile Terpolymer English/German
GME QK 000234-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English/German
GME QK 001951-2003 ABS ABS English/German
GME TM 411300-1976 ABS-Folie ABS-Foil German
GME QK 001952-2003 ABS ABS English/German
GME QK 001956-2003 ABS ABS English/German
GME QK 000262-1996 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene-Styrene Terpolymer English/German
GME QK 001951-2009 Acrylnitril-Butadien-Styrol Terpolymerisat Acrylonitrile-Butadien-Styrene Terpolymer English/German
GME QK 001249-1993 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene Styrene-Terpolymer English/German
GME QK 000273-1996 Acrylnitril-Butadien-Styrol Terpolymerisat Acrylonitrile-Butadiene-Styrene-Terpolymer English/German
GME QK 000234-2010 Acrylate-styrene-acrylonitrile terpolymer English/German. 3rd edition

German Institute for Standardization

DIN 16891:1980 Pipes of acrylnitrile-butadiene-styrene (ABS) or acrylnitrile-styrene-acrylester (ASA); dimensions
DIN EN ISO 19065-2:2019-06 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
DIN EN ISO 19064-2 E:2019-04 Plastic Styrene Acrylonitrile (Draft)
DIN EN ISO 19065-1:2015-03 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
DIN EN ISO 19065-2 E:2018-03 Plastics Acrylonitrile Styrene Acrylate (Draft)
DIN EN ISO 6402-2:2004-05 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
DIN EN ISO 19062-2 E:2018-03 Plastics Acrylonitrile Butadiene Styrene (Draft)
DIN EN ISO 6402-1:2003-02 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DIN EN ISO 19065-2:2018-03 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
DIN EN ISO 19066-2 E:2019-04 Plastic Methyl Methacrylate Acrylonitrile Butadiene Styrene (Draft)
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

British Standards Institution (BSI)

BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 19065-2:2019 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Preparation of test specimens and det...
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS EN ISO 6402-2:2003(2004) Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
BS 5391-1:2006 Acrylonitrile-butadiene-styrene (ABS) pressure pipe - Specification
BS 4936:1974 Specification for styrene-acrylonitrile (SAN) moulding and extrusion materials

GM Holden Ltd

HOLDEN HN 1577-2001 Moulding Compound - Styrene Acrylonitrile (SAN)
HOLDEN HN 1259-2007 ACRYLONITRILE BUTADIENE STYRENE (ABS) COMPOUNDS
HOLDEN HN 1259-2012 Acrylonitrile Butadiene Styrene ABS Compounds
HOLDEN HN 1783-2009 OSA OLEFINIC RUBBER – STYRENE – ACRYLONITRILE COMPOUNDS
HOLDEN HN 1782-2012 ASA (Acrylonitrile-styrene-acrylate) Compounds and Blends
HOLDEN HN 1782-2001 ASA (Acrylonitrile - Styrene Acrylate) Compounds and Blends
HOLDEN HN 2411-2012 Acrylonitrile Butadiene Styrene ABS and Polyamide 6 Alloys
HOLDEN HN 2411-2004 ACRYLONITRILE BUTADIENE STYRENE (ABS) AND POLYAMIDE 6 ALLOYS

Lithuanian Standards Office

LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

GCC Standardization Organization

GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 4581:2013 Plastics-Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method

European Committee for Standardization (CEN)

EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994

Danish Standards Foundation

DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...

CEN - European Committee for Standardization

EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

Standards Norway

NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

Japanese Industrial Standards Committee (JISC)

JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
JIS K 6873:1975 Acrylonitrile-butadiene-styrene (ABS) sheets
JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6875:1995 Testing methods for AS resins

Swedish Institute for Standards

SS-EN ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
SS-EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
SS-EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
SS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

International Organization for Standardization (ISO)

ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 4581:1987 Plastics; Styrene/acrylonitrile copolymers; Determination of residual acrylonitrile monomer content; Gas chromatography method
ISO 4581 Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content Gas chromatography method
ISO 24048:2022 Plastics — Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method
ISO 4581:1994 Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method

Ente Nazionale Italiano di Unificazione

UNI EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificat...
UNI EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene- acrylate (ASA), acrylonitrile-(ethylene- propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Designation system and basis for specifications
UNI EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene- acrylate (ASA), acrylonitrile-(ethylene- propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Designation system and basis for specifications
UNI EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determina...
UNI EN ISO 6402-2:2006 Plastics - Acrylonitrile-styrene- acrylate (ASA), acrylonitrile-(ethylene- propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determ...
UNI 7041:1972 Acrylonitrile-butadiene-styrene (abs) plastic materials. Classification system.

Spanish Association for Standardization (UNE)

UNE-EN ISO 19065-2:2020 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
OS GSO ISO 4581:2013 Plastics-Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method

GM Daewoo

GMKOREA EDS-M-4308-2012 Acrylonitrile-styrene-acrylate copolymer
GMKOREA EDS-M-4315-2012 Blow molding acrylonitrile-butadiene-styrene copolymer
GMKOREA EDS-M-4301-2012 Heat Resistance Acrylonitrile- Butadiene-Styrene Copolymer
GMKOREA EDS-M-4305-2012 Matt acrylonitrile-butadiene-styrene copolymer
GMKOREA EDS-M-4309-2012 Weather Resistant Acrylonitrile-Butadiene- Stylene Copolymer

Association Francaise de Normalisation

NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) materials for molding and extrusion - Part 2: Preparation of
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA) plastic, acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) plastic and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) plastic for molding and extrusion - Part 1: s
NF T54-420*NF EN ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods.

RO-ASRO

STAS 10024-1975 ACRYLONITRILE- BUTADIENE - STYRENE COPOLYMER

Korean Agency for Technology and Standards (KATS)

KS M 3351-1982 ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3347-2022 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3351-1979(1997) ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3347-1986 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3351-2002 ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3347-2016(2021) Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3347-2011 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3347-2016 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3360-2002 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS
KS M ISO 4581-2021 Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
KS M ISO 4581:2016 Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
KS M 3360-1981 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS
KS M ISO 4581-2016 Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
KS M ISO 4581-2016(2021) Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
KS M ISO 4581:2006 Plastics — Styrene/acrylonitrile copolymers-Determination of residual acrylonitrile monomer content-Gas chromatography method
KS M 3845-2020 Plastics－Recycled moulding materials－Acrylonitrile/butadiene/styrene(ABS)
KS M 3845-2010(2020) Plastics－Recycled moulding materials－Acrylonitrile/butadiene/styrene(ABS)
KS M 3845-2010 Plastics-Recycled moulding materials-Acrylonitrile/butadiene/styrene(ABS)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
BH GSO ISO 4581:2016 Plastics-Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method

TH-TISI

TIS 2357-2007 Acrylonitrile.butadiene.styrene (abs) pressure pipe
TIS 655.3-2011 Plastic utensils for food.part 3: acrylonitrile-butadiene-styrene and styrene.acrylonitrile

SE-SIS

SIS 16 66 52-1966 Styrene-acrylonitrile copolymer moulding and extrusion compounds

American Society for Testing and Materials (ASTM)

ASTM F2806-23 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
ASTM D1788-81 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics
ASTM D3160-20a Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene)
ASTM D4077-11 Standard Specification for Cumene (Isopropylbenzene)
ASTM D4322-96 Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography
ASTM D2282-99(2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe

YU-JUS

JUS ISO 4581:1992 Plastics. Styrene/acrylonitrile copolymers. Determination of residual acrylonitrile monomer content. Gas chromatography method
JUS ISO 2561:1992 Plastics. Determination of residual styrene monomer in polystyrene. Gas chromatographic method

GM North America

GM GM9740P-1988 Acrylonitrile, Styrene and Butadiene Compositions in ABS Polymers

GM Global

GMW 15572-2011 Acrylonitrile Butadiene Styrene Issue 3; English

IT-UNI

UNI 7041-1972 Acrylonitrile. Butadiene. Styrene (ABS) thermoplastic material. Classification

American National Standards Institute （ANSI)

ANSI/ASTM F2969:2012 SPECIFICATION FOR ACRYLONITRILE-BUTADIENE-STYRENE (ABS) IPS DIMENSIONED PRESSURE PIPE

Others: Cryl phenyl benzonitrile,Propanonitrile