Corrosion potential and corrosion current

Corrosion potential and corrosion current, Total:434 items.

The international standard classification for "Corrosion potential and corrosion current" includes: Corrosion of metals , Other treatments and coatings .

The Chinese standard classification for "Corrosion potential and corrosion current" includes: Metal chemical property test method , Railway engineering .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16545-2025 Corrosion of metals and alloys—Removal of corrosion products from corrosion test specimens
GB/T 16545-2015 Corrosion of metals and alloys―Removal of corrosion products from corrosion test specimens
GB/T 19292.4-2003 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of STANDARD speciments for the evaluation of corrosivity
GB/T 19292.2-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 2:Guiding values for the corrosivity categories
GB/T 45879-2025 Corrosion of metals and alloys—Electrochemical methods for fast test of stress corrosion cracking susceptibility
GB/T 40377-2021 Corrosion of metals and alloys—Determination of AC corrosion—Protection criteria
GB/T 40299-2021 Corrosion of metals and alloys—Conventions applicable to electrochemical measurements in corrosion testing
GB/T 17899-2023 Corrosion of metals and alloys—Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
GB/T 32550-2016 Corrosion of metals and alloys―Determination of the critical pitting temperature under potentiostatic control
GB/T 33373-2016 Anticorrision-Electrochemical protection-Terminology
GB/T 43666-2024 Corrosion of metals and alloys-Guidelines for corrosion test by electrochemical noise measurements
GB/T 24513.1-2009 Corrosion of metals and alloys—Classification of low corrosivity of indoor atmospheres—Part 1:Determination and estimation of indoor corrosivity
GB/T 16545-1996 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens
GB/T 37619-2019(英文版) Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes
GB/T 19292.2-2003 Corrosion of metals and alloys - Corrosivity of atomospheres - Guiding values for the corrosivity categories
GB/T 37619-2019 Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes

未注明发布机构

AMPP Paper 17717-2022 In-situ synthesis of corrosion product-polymer composites on carbon steel for enhanced erosion-corrosion protection in CO2 corrosion environments
JIS Z 0103:1996(2002) Glossary of terms used in rust and corrosion preventive technology
DNV-RP-0416-2015(2021) Corrosion Protection for Wind Turbines
FORD FLTM BQ 004-1-2000 CORRODKOTE TEST FOR PLATED PARTS
AMPP Paper 17631-2022 Standard for Corrosion and Corrosion Protection of Water Wells

Professional Standard-Ships

CB/T 3712-2013 Protection Method for Hull Stray Current Corrosion
CB/T 3712-1995 The Protection Method of Ship Hull Stray Current Corrosion

Taiwan Provincial Standard of the People's Republic of China

CNS 14513-2001 Glossary of terms to corrosion and corrosion testing
CNS 14122-1998 Corrosion of metals and alloys-Removal of corrosion products from corrosion test specimens
CNS 13753-2005 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity

Professional Standard - Urban Construction

CJJ 49-1992 Technical Regulation for Protection against Subway Stray Current Corrosion
CJJ/T 49-2020 Technical standard for stray current corrosion protection in metro

Group Standards of the People's Republic of China

T/CSCP 0004-2022 Material corrosion big data evaluation technology - cumulative corrosion integral electricity method
T/CSTM 00046.12-2018 Corrosion test of low alloy structure steels Part 12: The test method of galvanic corrosion
T/CSTM 00046.15-2018 Corrosion test of low alloy structure steels -- Part 15: The test method of electrochemistry corrosion
T/CIATA 0023-2017 Anticorrosion Bracket for Steel Cable
T/ACCEM 236-2024 Corrosion-resistant metal capacitor film

Professional Standard - Energy and Power Planning

DL/T 2657-2023 Guidelines for the control of corrosion and scaling in heating networks of power plants
DL/T 2094-2020 Anti-corrosion technical specification for grounding of AC electrical engineering

Professional Standard - Electron

SJ/T 11506-2015 Aluminum etching solution for Integrated Circuit

Professional Standard - Energy

NB/T 20543-2019 Guideline for corrosion management in nuclear power plants

Military Standard of the People's Republic of China-General Armament Department

GJB 1720-1993 Corrosion and protection of dissimilar metals
GJB 1720A-2018 Corrosion and protection of dissimilar metals

Professional Standard - Petroleum

SY/T 0546-1996 Collection and Identification of Corrosion Products

Henan Provincial Standard of the People's Republic of China

DB41/T 1294-2016 Test and Evaluation of High Temperature Sulfur Corrosion of Water Wall of Power Plant Boiler

National Association of Corrosion Engineers (NACE)

NACE Paper 12954-2019 New method to study flow-accelerated corrosion and erosion-corrosion
NACE Paper 07708-2016 Localized Corrosion of Corrosion-Resistant Alloys in Oil and Gas Production Environments: II. Corrosion Potential
NACE Paper 06160-2006 AC Corrosion
NACE Paper 03631-2003 Coupling of CO2 corrosion and multiphase flow model
NACE Paper 12828-2019 AC Interference Corrosion, Corrosive Soil, Design Issues
NACE Paper 07230-2016 Design and supply of corrosion and stray current monitoring systems
NACE Paper 13395-2019 Modeling current paths in membrane-based corrosion sensors to improve corrosion data interpretation
NACE Paper 12876-2019 A unified perspective on the corrosion mechanism of COD corrosion, H2S corrosion and organic acid corrosion in weak acid solutions
NACE Paper 00075-1981 Grooving Corrosion of Arc Resistance Welded Steel Pipe in Water
NACE Paper 08637-2008 Sulfide corrosion in corrosive steel
NACE Paper 14925-2020 Effect of Corrosion Inhibitor Head Group on the Electrochemical Processes Governing CO2 Corrosion
NACE Paper 04626-2004 CO2 corrosion multiphase flow model
NACE Paper 13164-2019 AC corrosion evaluation of submarine umbilical cable armored wire
NACE Paper 13544-2019 Observation of underground corrosion induced by micro-corrosion
NACE Paper 10332-2010 Corrosion characteristics of carbon steel in acidic and sweet environments: general corrosion, pitting or localized corrosion?
NACE SP21427-2023 Detection and Mitigation of Stray-Current Corrosion of Reinforced and Prestressed Concrete Structures
NACE Paper 05759-2015 Corrosivity and Corrosion Inhibition of Wet-Sour Crude Oil Wells
NACE SP21433-2019 (IEEE Std 2445-2018) Corrosion detection and assessment of buried and underground power transmission and distribution structures
NACE TM0416-2023 Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion

Korean Agency for Technology and Standards (KATS)

KS D 0270-2007 Test methods for critical crevice temperature and/of stainless steels
KS D 0277-2005 Standard guide for conducting and evaluating galvanic corrosion tests in electrolytes
KS D 0277-2014 Standard guide for conducting and evaluating galvanic corrosion tests in electrolytes
KS D ISO 11463:2003 Corrosion of metals and alloys-Evaluation of pitting corrosion
KS D ISO 11463:2017 Corrosion of metals and alloys－Evaluation of pitting corrosion
KS D ISO 8407-2019(2024) Corrosion of Metals and alloys — Removal of corrosion products from corrosion test specimens
KS D ISO 8407-2019 Corrosion of Metals and alloys — Removal of corrosion products from corrosion test specimens
KS D ISO 8407:2019 Corrosion of Metals and alloys — Removal of corrosion products from corrosion test specimens
KS D ISO 9226-2023 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
KS D ISO 9226-2018(2023) Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
KS D ISO 9226:2018 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
KS D ISO 9226-2024 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
KS D ISO 9226-2018 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
KS D ISO 9226:2003 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
KS C 0248-60-2013 Environmental testing － Part 2: Tests － Test Ke: Flowing mixed gas corrosion test
KS D ISO 9224:2003 Corrosion of metals and alloys-Corrosivity of atmospheres-Guiding values for the corrosivity categories
KS D ISO 9224-2020 Corrosion of metals and alloys — Corrosivity of atmospheres —Guiding values for the corrosivity categories
KS D ISO 8407:2003 Corrosion of metals and alloys-Removal of corrosion products from corrosion test specimens
KS D ISO 9224:2015 Corrosion of metals and alloys－Corrosivity of atmospheres－Guiding values for the corrosivity categories
KS D ISO 9224:2020 Corrosion of metals and alloys — Corrosivity of atmospheres —Guiding values for the corrosivity categories
KS D ISO 8407:2014 Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
KS D ISO 10270-2021 Corrosion of metals and alloys－Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
KS D ISO 10270-2016(2021) Corrosion of metals and alloys－Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
KS F 2712-2023 Test method for corrosion potentials of uncoated reinforcing steel in concrete
KS D ISO 7441-2018(2023) Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests
KS D ISO 7441:2018 Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests
KS D ISO 7441-2018 Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests
KS D ISO 7441-2023 Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests

American Society for Testing and Materials (ASTM)

ASTM G192-08 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM G192-08(2014) Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM STP 576-1976 Galvanic and Pitting Corrosion
ASTM STP 576-76 Galvanic and Pitting Corrosion
ASTM STP 978-1988 Galvanic Corrosion
ASTM G15-03 Standard Terminology Relating to Corrosion and Corrosion Testing
ASTM G15-03a Standard Terminology Relating to Corrosion and Corrosion Testing
ASTM G15-07 Standard Terminology Relating to Corrosion and Corrosion Testing
ASTM STP 906-1986 Corrosion effects of stray currents and techniques for evaluating corrosion of steel bars in concrete
ASTM G116-99(2004) Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
ASTM G116-99 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
ASTM STP 727-1981 Electrochemical corrosion testing
ASTM STP 717-1980 Geothermal Scaling and Corrosion
ASTM G71-81(2003) Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM STP 1506-2009 Advances in Electrochemical Techniques for Corrosion Monitoring and Measurement
ASTM G69-97(2003) Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G69-97 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G69-20 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM STP 801-1983 Corrosion fatigue: mechanics, metallurgy, electrochemistry and engineering
ASTM G15-02 Standard Terminology Relating to Corrosion and Corrosion Testing
ASTM G15-04 Standard Terminology Relating to Corrosion and Corrosion Testing
ASTM STP 1148-1992 Corrosion of electronic and magnetic materials
ASTM RR-G01-1024 2012 G0069- Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G15-99b Standard Terminology Relating to Corrosion and Corrosion Testing
ASTM G15-06 Standard Terminology Relating to Corrosion and Corrosion Testing
ASTM STP 684-1979 Corrosion and Degradation of Implant Materials
ASTM G15-05 Standard Terminology Relating to Corrosion and Corrosion Testing

International Telecommunication Union (ITU)

ITU-T L.81-2009 Monitoring systems for outside plant facilities
ITU-T L.8 FRENCH-1988 CORROSION CAUSED BY ALTERNATING CURRENT
ITU-T L.8-1980 Corrosion caused by alternating current
ITU-T L.8 SPANISH-1988 CORROSION CAUSED BY ALTERNATING CURRENT
ITU-T L.8-1976 Corrosion caused by alternating current
ITU-T L.8-1984 Corrosion caused by alternating current
ITU-T L.1-1980 Protection against corrosion
ITU-T L.1-1984 Protection against corrosion

German Institute for Standardization

DIN 50918:1978-06 Corrosion of metals; electrochemical corrosion tests
DIN 50918:2018-09 Corrosion of metals - Electrochemical corrosion tests
DIN 50918 E:2018-05 Corrosion of metals - Electrochemical corrosion tests
DIN 50918:2018 Corrosion of metals - Electrochemical corrosion tests
DIN 50919 E:2021-08 Corrosion of metal - Corrosion investigations of bimetallic corrosion in electrolytic solutions
DIN 50918:1978 Corrosion of metals; electrochemical corrosion tests
DIN 50919:2016 Corrosion of metal - Corrosion investigations of bimetallic corrosion in electrolytic solutions
DIN 50919:2022-02 Corrosion of metal - Corrosion investigations of bimetallic corrosion in electrolytic solutions
DIN 50919:2016-02 Corrosion of metal - Corrosion investigations of bimetallic corrosion in electrolytic solutions
DIN 50919 E:2015-05 Corrosion of metal - Corrosion investigations of bimetallic corrosion in electrolytic solutions
DIN 50919:2021-08 Draft Document - Corrosion of metal - Corrosion investigations of bimetallic corrosion in electrolytic solutions
DIN 50918 E:2018 Draft Document - Corrosion of metals - Electrochemical corrosion tests
DIN 50918:2018-05 Draft Document - Corrosion of metals - Electrochemical corrosion tests
DIN 50919:1984-02 Corrosion of metal; investigations of galvanic corrosion in electrolytic solutions
DIN 50919 E:2015 Draft Document - Corrosion of metal - Corrosion investigations of bimetallic corrosion in electrolytic solutions
DIN EN 50162:2005-05*VDE 0150:2005-05 Protection against corrosion by stray current from direct current systems;
DIN 50905-2:1986-12 Corrosion of metals; corrosion testing; corrosion characteristics under uniform corrosion attack
DIN 50919:1984 Corrosion of metal; investigations of galvanic corrosion in electrolytic solutions
DIN 50905-2:1987 Corrosion of metals; corrosion testing; corrosion characteristics under uniform corrosion attack
DIN 50905-2:1986 Corrosion of metals; corrosion testing; corrosion characteristics under uniform corrosion attack
DIN 50905-2 E:2021 Draft Document – Corrosion of metals – Corrosion testing – Part 2: Values of corrosion with uniform corrosion attack
DIN 50905-2 E:2021-11 Draft Document - Corrosion of metals - Corrosion testing - Part 2: Values of corrosion with uniform corrosion attack
DIN 50905-2:2021-11 Draft Document - Corrosion of metals - Corrosion testing - Part 2: Values of corrosion with uniform corrosion attack
DIN 50919:2022 Corrosion of metal - Corrosion investigations of bimetallic corrosion in electrolytic solutions
DIN 50920-1:1985-10 Corrosion of metals; corrosion testing in flowing liquids; general
DIN 50905-2 E:2021-12 Corrosion of metals - Corrosion testing - Part 2: Values of corrosion with uniform corrosion attack
DIN 50905-2:2022 Corrosion of metals - Corrosion testing - Part 2: Values of corrosion with uniform corrosion attack
DIN 50905-2:2022-09 Corrosion of metals - Corrosion testing - Part 2: Values of corrosion with uniform corrosion attack
DIN 50905-3 E:2021-11 Draft Document - Corrosion of metals - Corrosion testing - Part 3: Values of corrosion with non-uniform and localized corrosion attack without mechanical stresses
DIN 50905-3:1986 Corrosion of metals; corrosion testing; corrosion characteristics under nonuniform and localized corrosion attack without mechanical stress
DIN EN 50162:2005 Protection against corrosion by stray current from direct current systems; German version EN 50162:2004
DIN EN ISO 18086:2021-02 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019); German version EN ISO 18086:2020
DIN 50905-1:1987-01 Corrosion of metals; corrosion testing; principles
DIN 50905-1:1987 Corrosion of metals; corrosion testing; principles
DIN EN ISO 18086 E:2017-04 Corrosion of Metals and Alloys Protection Standard for Determination of AC Corrosion (Draft)
DIN 50928:1985-09 Corrosion of metals; testing and assessment of the corrosion protection of coated metallic materials in contact with aqueous corrosive agents
DIN EN ISO 18086 E:2020-08 Corrosion of Metals and Alloys Protection Standard for Determination of AC Corrosion (Draft)
DIN 50905-3:1987 Corrosion of metals; corrosion testing; corrosion characteristics under nonuniform and localized corrosion attack without mechanical stress
DIN 50920-1:1985 Corrosion of metals; corrosion testing in flowing liquids; general
DIN 50905-3:2021-11 Draft Document - Corrosion of metals - Corrosion testing - Part 3: Values of corrosion with non-uniform and localized corrosion attack without mechanical stresses
DIN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005);English version of DIN EN ISO 17864:2008-07
DIN EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012); German version EN ISO 9224:2012
DIN 50929-1:1985 Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; general
DIN EN ISO 8407 E:2020-02 Corrosion of Metals and Alloys Removal of Corrosion Products from Corrosion Test Specimens (Draft)
DIN EN ISO 17864:2008-07 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005); German version EN ISO 17864:2008
DIN EN ISO 8407:2021-04 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2021); German version EN ISO 8407:2021
DIN EN ISO 8407 E:2013-08 Corrosion of Metals and Alloys Removal of Corrosion Products from Corrosion Test Specimens (Draft)
DIN 50905-3 E:2021-12 Corrosion of metals - Corrosion testing - Part 3: Values of corrosion with non-uniform and localized corrosion attack without mechanical stresses
DIN 50928:1985 Corrosion of metals; testing and assessment of the corrosion protection of coated metallic materials in contact with aqueous corrosive agents
DIN 50905-3:2022-09 Corrosion of metals - Corrosion testing - Part 3: Values of corrosion with non-uniform and localized corrosion attack without mechanical stresses
DIN 50905-3:2022 Corrosion of metals - Corrosion testing - Part 3: Values of corrosion with non-uniform and localized corrosion attack without mechanical stresses
DIN EN ISO 9224:2012-05 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012); German version EN ISO 9224:2012
DIN EN ISO 10270:2022-05 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022); German version EN ISO 10270:2022
DIN EN ISO 9226:2012-05 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012); German version EN ISO 9226:2012
DIN 50905-3:1986-12 Corrosion of metals; corrosion testing; corrosion characteristics under nonuniform and localized corrosion attack without mechanical stress
DIN 50905-3 E:2021 Draft Document – Corrosion of metals – Corrosion testing – Part 3: Values of corrosion with non-uniform and localized corrosion attack without mechanical stresses
DIN EN ISO 11463:2008-08 Corrosion of metals and alloys - Evaluation of pitting corrosion (ISO 11463:1995)
DIN EN ISO 9226 E:2011-08 Draft Document - Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO/FDIS 9226:2011); German version FprEN ISO 9226:2011
DIN EN ISO 8407:2014-06 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2009)
DIN 81249-3:1997-11 Corrosion of metals in sea water and sea atmosphere - Part 3: Galvanic corrosion in sea water
DIN EN ISO 11463:2020-12 Corrosion of metals and alloys - Guidelines for the evaluation of pitting corrosion (ISO 11463:2020); German version EN ISO 11463:2020

American Water Works Association (AWWA)

AWWA DSS91009 Corrosion and Corrosion Control in Water Treatment Plants
AWWA ACE59928 Comparison of Corrosive Potential by Source and Process
AWWA JAW61903 Journal AWWA — Corrosion and Corrosion Control of Iron Pipe: 75 Years of Research
AWWA DSS58724 Corrosiveness of Controlled Low Strength Material (CLSM) vs. That of Encasement Sand
AWWA WQTC64083 Correlation of Fe, Pb and Cu Corrosion with Electro Noise Parameters
AWWA JAW10078 Journal AWWA — Principles of Internal Corrosion and Corrosion Monitoring
AWWA ACE69099 The Impacts of Flow Electrification on Copper Corrosion in Potable Water Systems

International Organization for Standardization (ISO)

ISO 8407:2009 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens
ISO 8407:1991 Corrosion of metals and alloys; removal of corrosion products from corrosion test specimens
ISO 9224:1992 Corrosion of metals and alloys; corrosivity of atmospheres; guiding values for the corrosivity categories
ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
ISO 9226:1992 Corrosion of metals and alloys; corrosivity of atmospheres; determination of corrosion rate of standard specimens for the evaluation of corrosivity
ISO 9223:1992 Corrosion of metals and alloys; corrosivity of atmospheres; classification
ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
ISO 17474:2012 Corrosion of metals and alloys - Conventions applicable to electrochemical measurements in corrosion testing
ISO 7441:1984 Corrosion of metals and alloys; Determination of bimetallic corrosion in outdoor exposure corrosion tests
ISO 7441:2015 Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests
ISO 17093:2015 Corrosion of metals and alloys - Guidelines for corrosion test by electrochemical noise measurements
ISO 11845:1995 Corrosion of metals and alloys - General principles for corrosion testing
ISO 9225:1992 Corrosion of metals and alloys; corrosivity of atmospheres; measurement of pollution
ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres
ISO 18086:2015 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria
ISO 23449:2020 Corrosion of metals and alloys — Multielectrode arrays for corrosion measurement
ISO 11881:1999 Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys
ISO 18086:2019 Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria
ISO 9223:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation
ISO 11463:1995 Corrosion of metals and alloys - Evaluation of pitting corrosion
ISO 8407:2021 Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
ISO/TR 16203:2016 Corrosion of metals and alloys - Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
ISO 11844-1:2006 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity
ISO 9812:2024 Corrosion of metals and alloys - Corrosion test method for disinfectant - Spray test method
ISO 22858:2020 Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion
ISO 8407:2021/Amd 1:2025 Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens — Amendment 1
ISO 17864:2005 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
ISO 11844-2:2005 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres
ISO 11463:2020 Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion
ISO 11881:1999/cor 1:1999 Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys; Technical Corrigendum 1
ISO 10270:2022 Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
ISO 11844-3:2006 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity
ISO 19735:2023 Corrosion of metals and alloys — Corrosivity of atmospheres — Mapping areas of increased risk of corrosion
ISO/FDIS 19735:2023 Corrosion of metals and alloys — Corrosivity of atmospheres — Mapping areas of increased risk of corrosion
ISO 10270:1995 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution

Spanish Association for Standardization (UNE)

UNE 57101:2006 Paper and board. Determination of potential of corrosion.
AENOR UNE-EN 50162:2005 Protection against corrosion by stray current from direct current systems
UNE-EN 50162:2005 Protection against corrosion by stray current from direct current systems
AENOR UNE-EN ISO 18086:2018 Corrosion of metals and alloys. Determination of corrosion caused by alternating current. Protection criteria. (ISO 18086:2015).
UNE-EN ISO 18086:2022 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019)
UNE 112083:2010 Measurement of free corrosion potential on steel reinforced concrete structures
UNE-EN ISO 8407:2021 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2021)
UNE-EN ISO 8407:2014 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2009)
UNE-EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012) (Endorsed by AENOR in March of 2012.)
UNE-EN ISO 7441:2015 Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015)
UNE-EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012) (Endorsed by AENOR in March of 2012.)
UNE-EN ISO 17864:2009 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
AENOR UNE-EN ISO 17864:2009 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control (ISO 17864:2005)

Association Francaise de Normalisation

NF A05-211*NF EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories.
NF A05-213*NF EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
NF A05-327*NF ISO 17474:2012 Corrosion of metals and alloys - Conventions applicable to electrochemical measurements in corrosion testing
NF EN 2357:1989 Corrosion-resistant steel tension ends for crimping onto control cables - Dimensions and loads
NF A05-010*NF ISO 11845:2002 Corrosion of metals and alloys - General principles for corrosion testing.
NF A05-130*NF EN ISO 18086:2020 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria
NF A05-306*NF ISO 11881:2002 Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys.
NF C17-400*NF EN 50162:2005 Protection against corrosion by stray current from direct current systems.
NF EN 50162:2005 Protection against corrosion due to stray currents in DC systems
NF A05-210*NF EN ISO 9223:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation.
NF A05-130:2015 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria
NF A05-323:2008 Corrosion of metals and alloys - Evaluation of pitting corrosion.
NF A05-108:2014 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens
NF A05-119*NF EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
NF A05-129*NF ISO 17093:2015 Corrosion of metals and alloys - Guidelines for corrosion test by electrochemical noise measurements
NF A05-307-1:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1 : determination and estimation of indoor corrosivity.
NF A05-307-2:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2 : determination of corrosion attack in indoor atmospheres.
FD A05-013*FD ISO/TR 16203:2016 Corrosion of metals and alloys - Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
NF C57-106:2000 Salt mist corrosion testing of photovoltaic (PV) modules.
NF A05-308*NF EN ISO 7441:2015 Corrosion of metals and alloys - Determination of bimetallic corrosion in atmopheric exposure corrosion tests

British Standards Institution (BSI)

BS EN ISO 9224:2012 Corrosion of metals and alloys. Corrosivity of atmospheres. Guiding values for the corrosivity categories
BS EN 50162:2004(2005) Protection against corrosion by stray current from direct current systems
BS ISO 17474:2012 Corrosion of metals and alloys. Conventions applicable to electrochemical measurements in corrosion testing
BS EN ISO 9226:2012 Corrosion of metals and alloys. Corrosivity of atmospheres. Determination of corrosion rate of standard specimens for the evaluation of corrosivity
BS ISO 17093:2015 Corrosion of metals and alloys. Guidelines for corrosion test by electrochemical noise measurements
BS EN ISO 11844-1:2008 Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres-Determination and estimation of indoor corrosivity
BS EN ISO 18086:2020 Corrosion of metals and alloys. Determination of AC corrosion. Protection criteria
BS ISO 18086:2015 Corrosion of metals and alloys. Determination of AC corrosion. Protection criteria
BS EN ISO 9225:2012 Corrosion of metals and Alloys. Corrosivity of Atmospheres. Measurement of environmental parameters affecting corrosivity of atmospheres
BS EN 50162:2004 Protection against corrosion by stray current from direct current systems
25/30464311 DC BS ISO 16364 Corrosion of Metals and Alloys - Guidelines for Galvanic Corrosion Control
BS EN ISO 18086:2017 Corrosion of metals and alloys. Determination of AC corrosion. Protection criteria
BS EN 50162:2005 Protection against corrosion by stray current from direct current systems
BS ISO 15158:2014 Corrosion of metals and alloys. Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
BS ISO 23449:2020 Corrosion of metals and alloys. Multielectrode arrays for corrosion measurement
BS EN ISO 9223:2012 Corrosion of metals and alloys. Corrosivity of atmospheres. Classification, determination and estimation
BS ISO 17864:2005 Corrosion of metals and alloys. Determination of the critical pitting temperature under potentiostatic control
BS EN ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
BS EN ISO 17864:2008 Corrosion of metals and alloys. Determination of the critical pitting temperature under potientiostatic control
BS EN ISO 8407:2014 Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
BS PD ISO/TR 16203:2016 Corrosion of metals and alloys. Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
BS EN ISO 8407:2021+A1:2025 Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
BS ISO 8407:2009 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens
BS EN ISO 8407:2021 Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
BS ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control
20/30382328 DC BS ISO 23449. Corrosion of metals and alloys. Multielectrode arrays for corrosion measurement
BS EN ISO 7539-7:2005 Corrosion of metals and alloys - Stress corrosion testing - Method for slow strain rate testing
09/30209296 DC BS ISO 9226. Corrosion of metals and alloys. Corrosivity of atmospheres. Determination of corrosion rate of standard specimens for the evaluation of corrosivity
PD ISO/TR 16203:2016 Corrosion of metals and alloys. Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
05/30138231 DC ISO 8407. Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
BS ISO 19735:2023 Corrosion of metals and alloys. Corrosivity of atmospheres. Mapping areas of increased risk of corrosion
BS EN ISO 7441:2015 Corrosion of metals and alloys. Determination of bimetallic corrosion in atmospheric exposure corrosion tests
BS ISO 22858:2020 Corrosion of metals and alloys. Electrochemical measurements. Test method for monitoring atmospheric corrosion

European Committee for Standardization (CEN)

EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012)
EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012)
EN ISO 18086:2020 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019)
EN ISO 9225:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012)
EN ISO 18086:2017 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria
EN ISO 8407:2021 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2021)
EN ISO 9223:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation (ISO 9223:2012)
EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
CEN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
EN ISO 11844-2:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2005)
EN ISO 8407:2014 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens
EN ISO 11844-2:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2020)

Gosstandart of Russia

GOST 25331-1982 Electrodischarge machining. Terms and definitons
GOST 9.914-1991 Unified system of corrosion and ageing protection. Corrosion-resistant austenitic steels. Electrochemical methods for determination of intercrystalline corrosion resistance
GOST ISO 9226-2022 Corrosion of metals and alloys. Corrosivity of atmospheres. Methods for the determination of corrosion rate of standard specimens used for the evaluation of corrosivity
GOST ISO 9224-2022 Corrosion of metals and alloys. Corrosivity of atmospheres. Guiding values for the corrosivity categories
GOST 15954-1970 Electro-erosion copy-piercing machines. Basic dimensions

Ente Nazionale Italiano di Unificazione

UNI EN ISO 7539-7:1997 Corrosion of metals and alloys. Stress corrosion testing. Slow strain rate testing.
UNI EN ISO 18086:2017 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria
UNI EN 12500:2002 Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments
UNI EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
UNI EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
UNI EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
UNI EN ISO 8407:2021 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens
UNI EN ISO 8407:2014 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens
UNI EN ISO 11844-1:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity
UNI EN ISO 10270:2022 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
UNI EN ISO 4541:1997 Metallic and other non-organic coatings. Corrodkote corrosion test (CORR test).
UNI EN ISO 7441:1998 Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests.
UNI EN ISO 7441:2015 Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests

Comitato Elettrotecnico Italiano

CEI EN 50162:2005 Protection against corrosion by stray current from direct current systems

Swedish Institute for Standards

SS-EN 50162:2005 Protection against corrosion by stray current from direct current systems
SS-ISO 17864:2005 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control (ISO 17864:2005, IDT)
SS-EN ISO 18086:2020 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019)
SS-EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012)
SS-EN ISO 10270:2022 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022)
SS-EN ISO 8407:2021 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2021)
SS-ISO 7441:1989 Corrosion of metals and alloys - Determination ofbimetallic corrosion in outdoor exposure corrosion tests
SS-EN ISO 11844-1:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity (ISO 11844-1:2020)
SS-EN ISO 8407:2014 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2009)

Danish Standards Foundation

DANSK DS/EN 50162:2004 Protection against corrosion by stray current from direct current systems
DS/EN 50162:2004 Protection against corrosion by stray current from direct current systems
DANSK DS/ISO 18086:2021 Corrosion of metals and alloys – Determination of AC corrosion – Protection criteria
DS/ISO 18086:2021 Corrosion of metals and alloys – Determination of AC corrosion – Protection criteria
DS/ISO 23449:2020 Corrosion of metals and alloys – Multielectrode arrays for corrosion measurement
DS/ISO 8407:2021 Corrosion of metals and alloys – Removal of corrosion products from corrosion test specimens
DANSK DS/EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
DS/EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
DANSK DS/EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
DS/EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
DANSK DS/ISO 8407:2021 Corrosion of metals and alloys – Removal of corrosion products from corrosion test specimens
DANSK DS/EN ISO 18086:2021 Corrosion of metals and alloys – Determination of AC corrosion – Protection criteria (ISO 18086:2019)
DS/EN ISO 18086:2021 Corrosion of metals and alloys – Determination of AC corrosion – Protection criteria (ISO 18086:2019)
DANSK DS/EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
DS/EN ISO 8407:2021 Corrosion of metals and alloys – Removal of corrosion products from corrosion test specimens (ISO 8407:2021)
DS/EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
DANSK DS/ISO 10270:2022 Corrosion of metals and alloys – Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
DS/EN ISO 7441:1995 Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests
DANSK DS/EN ISO 10270:2008 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
DANSK DS/ISO 19735:2023 Corrosion of metals and alloys – Corrosivity of atmospheres – Mapping areas of increased risk of corrosion
DANSK DS/EN ISO 8407:2021 Corrosion of metals and alloys – Removal of corrosion products from corrosion test specimens (ISO 8407:2021)
DS/EN ISO 11463:2008 Corrosion of metals and alloys - Evaluation of pitting corrosion
DANSK DS/EN ISO 7441:2015 Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests
DANSK DS/ISO 22858:2020 Corrosion of metals and alloys – Electrochemical measurements – Test method for monitoring atmospheric corrosion

GM Holden Ltd

HOLDEN HN 1007-2022 Fluid: Anti Corrosion
HOLDEN HN 1007-2001 Fluid - Anti Corrosion

Lithuanian Standards Office

LST EN 50162-2005 Protection against corrosion by stray current from direct current systems
LST EN ISO 18086:2021 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019)
LST EN ISO 8407:2021 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2021)
LST EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012)

AT-ON

OENORM C 2370-2021 Paints and varnishes for corrosion protection - Components relevant for corrosion protection

U.S. Military Regulations and Norms

ARMY MIL-HDBK-729-1983 CORROSION AND CORROSION PREVENTION METALS
ARMY MIL-HDBK-729 VALID NOTICE 1-1989 CORROSION AND CORROSION PREVENTION METALS

Japanese Industrial Standards Committee (JISC)

JIS G 0577:1981 Method of pitting potential measurement for stainless steels
JIS G 0592:2002 Method of determining the repassivation potential for crevice corrosion of stainless steels

American Petroleum Institute (API)

API REPORT 94-62-1995 Erosion/Corrosion Testing for Multiphase Flow Lines

Military Standards (MIL-STD)

DOD A-A-54457-1991 WIRE, NONELECTRICAL, CORROSION RESISTING STEEL
DOD A-A-51297-1985 WIRE, NONELECTRICAL (CORROSION-RESISTING STEEL)
DOD A-A-53822-1989 WIRE, NONELECTRICAL (CORROSION-RESISTING STEEL, SOFT)

CZ-CSN

CSN 03 8104-1986 Protection.against corrosion. Metals and alloys. Methods of evaluation of corro-sion tests
CSN 03 8203-1979 Corrosion of metals. Corrosion aggressivity of atmosphere. Classifioation
CSN ISO 9226:1994 Corrosion of metals and alloys.Corrosivity of atmospheres.Determination of corrosion rate of standard specimens for the evaluation of corrosivity
CSN ISO 7441:1992 Corrosion of metals and alloys. Determination of bimetallic corrosion in outdoor exposure corrosion tests
CSN 03 8370-1963 Reduction of stray current corrosive effect on underground installations (pipings, cables etc.)
CSN 03 8134-1992 Corrosion protection. Metals, alloys and coatings. Corrosion tests of metals in high temperature gases

European Committee for Electrotechnical Standardization（CENELEC）

EN 50162:2004 Protection against corrosion by stray current from direct current systems

GM Global

GMW 17026-2013 Accelerated Corrosion Laboratory Test for Galvanic Corrosion Mechanisms Issue 1; English

GCC Standardization Organization

GSO ISO 9226:2015 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity
GSO ISO 9224:2015 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Guiding values for the corrosivity categories
GSO ISO 8407:2015 Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens
GSO ISO 7441:2015 Corrosion of metals and alloys -- Determination of bimetallic corrosion in atmospheric exposure corrosion tests
GSO ISO/TR 16203:2021 Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
GSO ISO 4539:2013 Electrodeposited chromium coatings -- Electrolytic corrosion testing (EC test)
GSO ISO 9225:2014 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Measurement of environmental parameters affecting corrosivity of atmospheres

Underwriters Laboratories (UL)

UL 2419-2004 ELECTRICALLY CONDUCTIVE CORROSION RESISTANT COMPOUNDS

SCC

ADS TS333 Test for Electrical Connectors Corrosion

Society of Automotive Engineers (SAE)

SAE AS12500 Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies
SAE TS333-1-1985 TS333 Test for Electrical Connectors Corrosion
SAE TS333-1 TS333 Test for Electrical Connectors Corrosion
SAE AMS2451/4E-2022 Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
SAE AMS2451/4A-2002 Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
SAE AMS2451/4B-2011 Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement

GM North America

GM GM6166M-2002 Heat and Corrosion Resistant Steel Electrodes

Magyar Szabványügyi Testület

MSZ 18096/8-1982 Potential measurement of buildings with corrosion hazards of underground metal electrical equipment

VN-TCVN

TCVN 5337-1991 Metallic corrosion.Atmosferical errosion properdes.Clasification

IFI/FASTNR - Industrial Fastener Institute

CORROS- Corrosion

Bureau of Indian Standards

IS 14297-2024 Corrosion of Metals and Alloys-Corrosivity of Atmospheres-Determination of Corrosion Rate of Standard Specimens for the Evaluation of Corrosivity
IS 14321-2024 Corrosion of Metals and Alloys- Corrosivity of Atmospheres- Guiding Values for The Corrosivity Categories

RO-ASRO

STAS SR ISO 9224:1996 Corrosion of metals and alloys. Corrosivity of atmospheres - Guiding values for corrosivity categories
STAS SR ISO 9226:1995 Corrosion of metals and alloys. Corrosivity of atmospheres. Determination of corrosion rate of standard specimens for the evaluation of corrosivity
STAS 9684-1982 CORROSION OF METALS Methods for testing and measuring resistance to corrosion

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 17864:2013 Corrosion of metals and alloys -- Determination of the critical pitting temperature under potientiostatic control
OS GSO ISO 9226:2015 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity
OS GSO ISO 8407:2015 Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens
OS GSO ISO 7441:2015 Corrosion of metals and alloys -- Determination of bimetallic corrosion in atmospheric exposure corrosion tests
OS GSO ISO/TR 16208:2016 Corrosion of metals and alloys -- Test method for corrosion of materials by electrochemical impedance measurements

PL-PKN

PN H04651-1971 Corrosion protection Classification and determination of corrosion agressivity of environments
PN H04630-1966 Metal Corrosion Testing Laboratory tests of resistance to intergranular corrosion of corrosion-resistant steels
PN H04626-1987 Corrosion of metals Determination of bimetallic corrosion in outdoor exposure corrosion test
PN-EN ISO 18086-2021-06 E Corrosion of metals and alloys -- Determination of AC corrosion -- Protection criteria (ISO 18086:2019)
PN E05024-1992 Corrosion protection. Reduction of leakage of stray currents from traction return circuits of direct current
PN-EN ISO 8407-2021-07 E Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens (ISO 8407:2021)
PN H04682-1970 Corrosion protection Temporary corrosion preventives Test methodes
PN H04637-1972 Corrosion protection Corrosion tests in natural atmospheric conditions

Standards Norway

NS-EN ISO 18086:2017 Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria (ISO 18086:2015)
NS-EN ISO 18086:2020 Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria (ISO 18086:2019)
NS-EN ISO 9226:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012)
NS-EN ISO 8407:2014 Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens (ISO 8407:2009)
NS-EN ISO 8407:2021 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2021)

YU-JUS

JUS C.A5.005-1989 Corrosion of Metals and Alloys PROCEDURES FOR THE REMOVAL OF CORROSION PRODUCTS FROM CORROSION TEST SPECIMENS

CH-SNV

SN EN ISO 18086:2021 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019)
SN EN ISO 8407:2021 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2021)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 8407:2016 Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens
BH GSO ISO/TR 16203:2022 Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
BH GSO ISO/TR 16208:2017 Corrosion of metals and alloys -- Test method for corrosion of materials by electrochemical impedance measurements