Broadening of internal stress peaks

Broadening of internal stress peaks, Total:155 items.

The international standard classification for "Broadening of internal stress peaks" includes: Medical Sciences and health care facilities in general , Rails and railway components , Bottles. Pots. Jars , Laboratory ware and related apparatus , Nuclear power plants. Safety , Rubber , Glass products , Glass in general , Wires and symmetrical cables , Corrosion of metals .

The Chinese standard classification for "Broadening of internal stress peaks" includes: Marking, packaing, transport and storage , Railway components , Daily use glass products , Laboratory glass, ceramic and plastic vessel , Nuclear radiation accident emergency and treatment , Semiconductor emitting device , Cable and its accessory , Quartz glass , Metal chemical property test method .

未注明发布机构

ASTM RR-B08-1007 2015 B0975-Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposist Stress Analyzer Method)
DIN 1498 E:2018-07 Tension bush for internal application

Professional Standard - Pharmaceutical Packaging

YBB 0016-2003 Neiyingli Cedingfa Tests for stress
YBB 0016(03)-2003 Internal stress measurement method (trial implementation)

Professional Standard - Railway

TB/T 3298-2013 Prestressed concrete broad sleeper for ballasted track

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 4545-1984 Glass containers－strees examination－method of test
GB/T 12415-1990 Pharmaceutical glass containers--Stress examination--Test methods
GB/T 17680.9-2003 Criteria for emergency planning and preparedness for nuclear power plants--Maintenance of on-site emergency response capacity
GB/T 42278-2022 Rubber,vulcanized—Determination of stress in tension upon heating
GB/T 15726-1995 Glassware－Stress examination methods
GB/T 12415-2015 Pharmacentical glass containers glassware stress examination methods
GB/T 4545-1984 Glass containers;Stress examination;Method of test
GB/T 9871-1988 Rubber,vulcanized--Determination of ageing characteristics by measurement of stress at a given elongation
GB/T 4545-2007 Test methods for stress examination of glass containers

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 15726-2021 Glassware一Stress examination methods

Group Standards of the People's Republic of China

T/NAIA 0222-2023 Guidelines for the application of quality infrastructure in carbon peaking and carbon neutrality
T/JCMS 0007-2022 Determination of the ultimate aerobic biodegradability of polylactic acid biodegradable materials under controlled composting conditions —Method by calculating the peak area of terahertz wide spectrum
T/CSAA 1-2020 Relief method for residual stress on thin wall parts by modal & wideband vibration
T/CATSI 05001-2018 Transportable vacuum insulated cryogenic pressure vessels—Requirement of pressure strengthening for inner vessels
T/CAQI 325-2023 Guidelines for the application of quality infrastructure in carbon peaking and carbon neutrality
T/CI 190-2023 Test procedures for stress wave propagation characteristics in rock bodies
T/BSRS 002-2019 Format and Content for Nuclear Accident Emergency Plans for Nuclear Power Plants

Jiangsu Provincial Standard of the People's Republic of China

DB3212/T 1133-2023 A guide to the application of quality infrastructure in peak carbon neutrality

Professional Standard - Electron

SJ 2355.7-1983 Method of measurement for peak emission wavelength and spectral radiation bandwidth of light-emitting devices
SJ 2658.12-1986 Methods of Measurement for Semiconductor Infrared Diodes - Methods of Measurement for Peak Emission Wavelength and Spectral Half Width

Professional Standard - Post and Telecommunication

YD/T 1281-2003 Iocal telecommunications cable for broadband applications polyolefin insulated copper conductors laminated aluminium polyethylene sheath

Professional Standard - Building Materials

JC/T 655-2012 Test methods for body stress of quartz glass products
JC/T 655-1996 Test method for internal stress of quartz glass products

Professional Standard - Agriculture

610药典中药成方制剂卷-2010 Various Discussions on Internal Medicine XIV. Qi Regulating Agents (1) Regulating Qi, Soothing the Liver, Broadening the Chest, Shu Qi Huazhi Pills
GB 12415-1990 Test method for internal stress of pharmaceutical glass containers

Professional Standard - Military and Civilian Products

WJ 1970-1990 Copper and copper alloy internal stress test mercury salt method

Professional Standard - Energy

NB/T 20697-2023 Design specifications for on-site emergency facilities in nuclear power plants

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 4157-2017 Laboratory testing of metals for resistance to sulfide stress crackingand stress corrosion cracking in H2S environment

工业和信息化部

JC/T 2516-2019 Reaction bonded silicon carbide liner for sand mill

National Aeronautics and Space Administration (NASA)

NASA-CR-2270-1973 Extended hydrodynamic theory of the peak and minimum pool boiling heat fluxes
NASA NACA-WR-L-67-1944 The effect of internal pressure on the buckling stress of thin-walled circular cylinders under torsion
NASA NACA-TR-D-949-1949 Effect of screens in wide-angle diffusers
NASA NACA-TR-116-1923 Applications of modern hydrodynamics to aeronautics
NASA-CR-33-1964 Probability functions for random responses: prediction of peaks, fatigue damage, and catastrophic failures

SCC

BS CP 1018:1971 Electric floorwarming systems for use with off-peak and similar supplies of electricity
DIN 1498 E:2018 Draft Document - Tension bush for internal application
BS 903-A4:1973 Methods of testing vulcanized rubber.-Determination of compression stress-strain
BS 903-A4:1957 Methods of testing vulcanized rubber. Determination of compression stress-strain
AWWA WQTC62393 Ozonation of Cyanotoxins: Chemical Kinetics and Applications
MP 13-1957 First report on prestressed concrete (covering recommended ultimate loads, limiting stress, and other mattes)
BS 6010-1:1980 Rolling bearings. Bearings with spherical outside surface and extended inner ring width-Specification for characteristics, dimensions and bore tolerances
AWWA JAW72857 Journal AWWA — Improving Resilience against the Effects of Climate Change
BS 903-A2:1971 Methods of testing vulcanized rubber.-Determination of tensile stress-strain properties
BS 903-A2:1956 Methods of testing vulcanized rubber. Determination of tensile stress-strain properties

German Institute for Standardization

DIN 1498:2020-08 Tension bush for internal application
DIN 13345:1978-08 Thermodynamics and kinetics of chemical reactions; symbols, units
DIN 13345:1978 Thermodynamics and kinetics of chemical reactions; symbols, units
DIN 67519:1970 Actinity in the field of optics; definition, measurement, application
DIN ISO 7743:2006 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties (ISO 7743:2004) English version of DIN ISO 7743:2006-11

DIN

DIN 1498:2020 Tension bush for internal application

CH-SNV

SNV 10120-1943 Anodizing of aluminum and aluminum alloys. Bending stress of oxide layer in sulfuric acid solution

GM North America

GM GM9321P-1991 Internal Stress in Nonmetallic Fuel Tanks
GM GM9308P-1995 Chemical Stress Resistance of Plastics

Society of Automotive Engineers (SAE)

SAE AIR1379A-1977 Prestressing (Autofrettaging) of Hydraulic Tubing Lines R(2001)
SAE J2016-1999 Chemical Stress Resistance of Polymers

Danish Standards Foundation

DS 10111:1980 Stress-strain curve for steel for reinforcement. Construction of an average strainstress curve
DS/ISO 37:1979 Rubber, vulcanized. Determination of tensile stress-strain properties

American Welding Society (AWS)

WRC 102:1965(1976) State Of Stress In A Circular Cylindrical Shell With A Circular Hole
WRC 360:1991 Stress Indices, Pressure Design And Stress Intensification Factors For Laterals In Piping
WRC 392:1994 Part 1: Developing Stress Intensification Factors: Standardized Method for Developing Stress Intensification Factors for Piping Components; Part 2: Developing Stress Intensification Factors: Effects of Weld Metal Profile on the Fatigue Life of Integr...
WRC 329:1987 Accuracy of Stress Intensification Factors for Branch Connections

Korean Agency for Technology and Standards (KATS)

KS B 0883-2021 Heat treatment of stress relieving for weldment in furnace
KS B 0883-1985 Heat treatment of stress relieving for weldment in furnace
KS B 0883-2016 Heat treatment of stress relieving for weldment in furnace
KS C IEC 60594:2003 Internal fuses and internal overpressure disconnectors for capacitors for inductive heat generating plants
KS M 6785-2009 Testing methods of stress-strain properties at low deformation for vulcanized rubber

CZ-CSN

CSN 63 1509-1978 Determination of force variation at radiál stress
CSN 03 8162-1986 Electroplated coatings. Method of measurement of internal stress
CSN 63 1509-1985 Determination of force variation at iadial stress
CSN 27 3821-1953 Width grooved power cable
CSN 68 1530-1989 Cosmetic products in aerosol contai- ers. Determination of intemal over- ressure and tightness
CSN 63 5307-1982 Pressure rubber hoses with textile reinlorcement Inside diameters and pressures
CSN 70 0534-1981 Glass. Method for testing of internal stress in glass products
CSN 62 2100-1965 Classification systém for mechanioal stress resistant vulcanized rubber
CSN 42 0489-1989 Wrought cooper-zinc alloys. Method of residual internal stress determination in ammonia atmosphere

ESDU - Engineering Sciences Data Unit

ESDU 83033 A-1984 Stress intensity factors for corner cracks in loaded holes in lugs and wide plates.
ESDU 79008-1979 Elastic stress concentration factors. Rectangular notch in the edge of a wide flat plate in tension.
ESDU 68047-1968 Straight pipes under internal pressure. Effect of bore eccentricity on maximum stress.
ESDU 68048-1968 Straight pipes under internal pressure. Effect of initial non-circularity on maximum stress.
ESDU 93030 A-1995 Three-dimensional elastic stress concentration factors. Plain or countersunk hole in a wide plate subjected to tension@ bending or pin loading.
ESDU 15005-2015 Stress concentration factors for optimised holes in flat plate
ESDU 72013-1972 Principal stresses and strains in a two-dimensional stress field.

Standard Association of Australia （SAA）

IEC Report IEC Report - Magnetically induced currents in the human body

SAE - SAE International

SAE J2016-2008 Chemical Stress Resistance of Polymers
SAE J2016-1989 Chemical Stress Resistance of Polymers@ Recommended Practice

British Standards Institution (BSI)

BS EN 13147:2001 Copper and copper alloys - Determination of residual stresses in the border area of a slit strip
BS ISO 12493:2017 Rubber, vulcanized. Determination of stress in tension upon heating
BS ISO 12493:2011 Rubber, vulcanized. Determination of stress in tension upon heating
BS ISO 8600-4:2014 Endoscopes. Medical endoscopes and endotherapy devices. Determination of maximum width of insertion portion
BS ISO 7743:2011 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS ISO 37:2011 Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
BS EN 60664-4:2006 Insulation coordination for equipment within low-voltage systems - Consideration of high-frequency voltage stress

ITE - Institute of Transportation Engineers

LP-241-1992 Stuck in Traffic—Coping With Peak-Hour Traffic Congestion

International Organization for Standardization (ISO)

ISO 12493:2017 Rubber, vulcanized — Determination of stress in tension upon heating
ISO 37:1977 Rubber, vulcanized; Determination of tensile stress-strain properties
ISO 12493:2011 Rubber, vulcanized - Determination of stress in tension upon heating
ISO 37:2017 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 37:2011 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 6056:1980 Rubber, vulcanized — Determination of compression stress relaxation (rings)
ISO 37:2005 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 37:1994 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 37:1976 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 18407:2018 Simplified design of prestressed concrete tanks for potable water

GSO

GSO ISO 4362:2013 Hydrometric determinations -- Flow measurement in open channels using structures -- Trapezoidal broad-crested weirs
GSO ISO 6133:2015 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
GSO ISO 12493:2013 Rubber, vulcanized - Determination of stress in tension upon heating

RU-GOST R

GOST 9592-1975 Ball bearings with broad inner face. Specifications
GOST 32322-2013 Lubricating greases. Determination of dropping point over wide temperature range

TR-TSE

TS 1967-1979 RUBBER, VULCANIZED — DETERMINATION OF TENSILE STRESS — STRAIN PROPERTIES

YU-JUS

JUS G.S2.127-1985 Rubber, vulcanized. Determination of tensile stress-strain properties

GB-REG

REG NACA-WRL-67-1940 The Effect of Internal Pressure on the Buckling Stress of Thin Walled Circular Cylinders Under Torsion
REG NACA-TN-2612-1952 Stress Problems in Pressurized Cabins

European Telecommunications Standards Institute (ETSI)

ETSI TR 103 365-2016 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Time Domain Based Peak Power Measurement for UWB Devices (V1.1.1)

HU-MSZT

MSZ 7497-1989 Internal wide ring of spherical connecting rod bearing
MSZ 6698-1979 Extended drill bit with deep drilling capability

BE-NBN

NBN E 52-019-1989 elevator. Calculation of the number and characteristics of elevators in capacity "peaks"

ETSI - European Telecommunications Standards Institute

TR 103 365-2016 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Time Domain Based Peak Power Measurement for UWB Devices (V1.1.1)

WRC - Welding Research Council

BULLETIN 69-1961 THE EFFECTS OF INTERNAL PRESSURE ON THIN-SHELL PRESSURE VESSEL HEADS WRINKLING OF A LARGE THIN CODE HEAD UNDER INTERNAL PRESSURE BIAXIAL STRESS CRITERIA FOR LARGE LOW-PRESSURE TANKS
BULLETIN 360-1991 STRESS INDICES@ PRESSURE DESIGN AND STRESS INTENSIFICATION FACTORS FOR LATERALS IN PIPING
BULLETIN 329-1987 ACCURACY OF STRESS INTENSIFICATION FACTORS FOR BRANCH CONNECTIONS
BULLETIN 281-1982 HYDRODYNAMIC RESPONSE OF FLUID COUPLED CYLINDERS: SIMPLIFIED DAMPING AND INERTIA COEFFICIENTS

American Society for Testing and Materials (ASTM)

ASTM D4645-04e1 Standard Test Method for Determination of the In-Situ Stress in Rock Using the Hydraulic Fracturing Method
ASTM D4645-04 Standard Test Method for Determination of the In-Situ Stress in Rock Using the Hydraulic Fracturing Method
ASTM D6534-05(2010) Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
ASTM B975-18e1 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-18 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-22 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-15 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM E736/E736M-19(2023) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
ASTM B636-84(2006)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer

Japanese Industrial Standards Committee (JISC)

JIS K 6254:2010 Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties
JIS K 6254:2016 Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties
JIS K 6251:2010 Rubber, vulcanized or thermoplastics -- Determination of tensile stress-strain properties
JIS K 6251:2004 Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties

American Nuclear Society (ANS)

ANS 19.11-1997 Calculation and Measurement of the Moderator Temperature Coefficient of Reactivity for Water Moderated Power Reactors

IN-BIS

IS 6059-1971 Recommendations for liquid flow measurement through weirs and flumes in open channels – free-discharging weirs with limited crest width

IET - Institution of Engineering and Technology

SCNRS FOR FUTRE ELEC SUPP-2011 Scenarios for a Future Electricity Supply: Cost-Optimized Variations on Supplying Europe and its Neighbours with Electricity from Renewable Energies

International Electrotechnical Commission (IEC)

IEC 60594:1977 Internal fuses and internal overpressure disconnectors for capacitors for inductive heat generating plants

PT-IPQ

NP ISO 37:2001 Rubber,vulcanized or thermoplastic Determination of tensile stress-strain properties

AENOR

UNE-ISO 37:2013 Rubber, vulcanised or thermoplastic. Determination of tensile stress-strain properties

KR-KS

KS M ISO 37-2022 Rubber, vulcanized or thermoplastic Determination of tensile stress strain properties

ZA-SANS

SANS 10037:2003 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
SANS 10037:2009 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties

Association Francaise de Normalisation

NF ISO 37:2018 Vulcanized or thermoplastic rubber - Determination of tensile stress-strain characteristics
NF T46-002:2012 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties.
NF T46-062:2012 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties.
NF G07-102:1987 Textiles. Testing of knitted fabrics. Methods of stress release and measurement of dimensional changes on stress release.

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TR-486-2001 Report on Round Robin Study to Correlate Interconnect Stress Test (IST) with Thermal Stress/Microsectioning Evaluations for Detecting the Presence of Inner-Layer Seperations

(U.S.) Ford Automotive Standards

FORD FLTM BO 158-3-2001 DETERMINATION OF CHEMICAL STRESS CRACK RESISTANCE OF PLASTIC PARTS UNDER MECHANICAL STRESS (Replaces FLTM EU-BO 058-03)

American Gear Manufacturers Association

AGMA 07FTM07-2007 Grinding Induced Changes in Residual Stresses of Carburized Gears

Others: Broadening of Diffraction Peaks,Broadening of internal stress peaks