Nitrile and Ester

Nitrile and Ester, Total:172 items.

The international standard classification for "Nitrile and Ester" includes: Thermoplastic materials , Rubber , Reinforced plastics , Organic nitrogen compounds , Occupational safety. Industrial hygiene , Man-made fibres , Surface active agents .

The Chinese standard classification for "Nitrile and Ester" includes: Synthetic resin and plastic , Synthetic rubber , Fibre reinforced composites , General organic chemicals , Labor sanitation , Chemical fibre , Surface active agent .

Professional Standard - Agriculture

JAP-076 Azoxystrobin detection method

Group Standards of the People's Republic of China

T/QGCML 678-2023 By-product of β-aminopropionitrile synthesis β,β'-iminodipropionitrile
T/CAFFCI 35-2019 2-cyclohexylidene-2-phenyl-acetonitrile （Peonile）
T/CDIA 0014-2020 Environmentally friendly 3-[benzyl(phenyl)amino]propanenitrile
T/SDAQI 009-2021 Determination of cyenopyrafen residue in fruits and vegetables
T/SAWP 0001-2020 Water quality standards for N-dimethylnitrosamine, dichloroacetonitrile and dibromoacetonitrile in drinking water

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31403-2015 Plastics―Acrylonitrile-butadiene-styrene/poly(methyl methacrylate) alloy
GB/T 26752-2020 PAN-based carbon fibre
GB/T 23958-2009 Iminodiacetonitrile for industrial use
GB/T 24797.3-2014 Film for wrapping rubber bales―Part 3:Ethylene-propylene-diene rubber(EPDM),acrylonitrilebutadiene rubber(NBR),hydrogenated nitrile-butadiene rubber(HNBR),acrylic-ethylene rubber(AEM) and acrylic rubber(ACM)
GB/T 26752-2011 PAN-based carbon fibre

Professional Standard - Chemical Industry

HG/T 5285-2017 N-Phenylglycinonitrile
HG/T 5488～5491-2018 CI Acid Red 405, Acid Black ATT, o-methoxyaniline-p-hydroxyethylsulfone sulfate and o-chlorobenzonitrile (2018)
HG/T 5845-2021 N-Ethyl Para Base Ester [Ethanol，2-[[4-(ethylamino)phenyl]sulfonyl]-，1-(hydrogen sulfate)]
HG/T 4775-2014 4-Ethyl biphenyl-4-carbonitrile
HG/T 5846-2021 N-Ethyl Meta Base Ester [3-N-ethyl-aminophenyl ( β-sulfatoethyl)sulfone]

Professional Standard - Petrochemical Industry

SH/T 1803-2016 Determination of the contents of hydroxyacetonitrile, formaldehyde and hydrocyanic acid in hydroxyacetonitrile for industrial use
SH/T 1802-2016 Industrial hydroxyacetonitrile

National Health Commission of the People's Republic of China

GBZ/T 300.133-2017 Determination of toxic substances in workplace air— Part 133: Acetonitrile, acrylonitrile and methylacrylonitrile

Jilin Provincial Standard of the People's Republic of China

DB22/T 2589-2016 Polyacrylonitrile-based carbon fiber cloth

Military Standard of the People's Republic of China-General Armament Department

GJB 2154A-2021 Specification for polyacrylonitrile based plain weave carbon cloth
GJB 8484-2015 Specification for polyacrylonitrile carbon fiber
GJB 2050A-2020 Specification for carboxyl-terminated polybutadiene acrylonitrile
GJB 2154-1994 Specification for polyacrylonitrile based plain weave carbon cloth
GJB 2050-1994 Specification for carboxyl-terminated polybutadiene acrylonitrile

Professional Standard - Textile

FZ/T 54065-2012 PAN-based carbon fiber precursors

Professional Standard - Light Industry

QB/T 4308-2012 Di（fatty acid ethyl ester）hydroxyethyl methyl ammonium methylsulfate

未注明发布机构

FORD WSS-M4D833-B1-2013 ACRYLONITRILE STYRENE ACRYLATE (ASA), EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

US-GSA

GSA A-A-3097-1997 ADHESIVES, CYANOACRYLATE, RAPID ROOM TEMPERATURE-CURING, SOLVENTLESS
GSA A-A-3097 VALID NOTICE 3-2006 ADHESIVES, CYANOACRYLATE, RAPID ROOM TEMPERATURE-CURING, SOLVENTLESS

German Institute for Standardization

DIN EN ISO 19066-2 E:2019-04 Plastic Methyl Methacrylate Acrylonitrile Butadiene Styrene (Draft)
DIN EN ISO 19065-2:2019-06 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 19065-1:2015-03 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
DIN EN ISO 19065-2 E:2018-03 Plastics Acrylonitrile Styrene Acrylate (Draft)
DIN EN ISO 19066-1:2015-02 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19066-1:2014); German version EN ISO 19066-1:2014
DIN EN ISO 10366-1:2003-02 Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) molding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 10366-1:2002)
DIN 16891:1980 Pipes of acrylnitrile-butadiene-styrene (ABS) or acrylnitrile-styrene-acrylester (ASA); dimensions
DIN EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DIN EN ISO 19066-1 E:2013 Draft Document - Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO/DIS 19066-1:2013); German version prEN ISO 19066-1:2013
DIN 54439:2018 Textiles - Methods for the determination of N-N-dimethylacetamide (DMAc) and N,N-dimethylformamide (DMF) in man-made fibres of polyacrylonitrile, polyurethane and aromatic polyamide fibres
DIN 54439 E:2017-06 Textiles - Methods for the determination of N-N-dimethylacetamide (DMAc) and N,N-dimethylformamide (DMF) in man-made fibres of polyacrylonitrile, polyurethane and aromatic polyamide fibres
DIN EN ISO 6402-2:2004-05 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DIN EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003); German version EN ISO 10366-2:2003
DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-1:2003-02 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

Ente Nazionale Italiano di Unificazione

UNI EN ISO 10366-1:2002 Plastics - Methyl methacrylate/ acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Designation system and basis for specifications.
UNI EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene- acrylate (ASA), acrylonitrile-(ethylene- propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Designation system and basis for specifications
UNI EN ISO 10366-1:2003 Plastics - Methyl methacrylate- acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Designation system and basis for specifications
UNI EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificat...
UNI EN ISO 19066-1:2014 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
UNI ISO 16365-3:2016 Plastics - Thermoplastic polyurethanes for moulding and extrusion - Part 3: Distinction between ether and ester polyurethanes by determination of the ester group content
UNI EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
UNI EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determina...

British Standards Institution (BSI)

BS EN ISO 19065-2:2019 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Preparation of test specimens and det...
BS EN ISO 10366-1:1999 Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Designation system and basis for specifications
BS EN ISO 10366-1:1995 Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Designation system and basis for specifications
BS EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 10366-2:1999 Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS 7969:2004(2009) Adhesives — Ethyl and methyl cyanoacrylate types
BS EN ISO 19066-2:2020 Plastics. Methyl methacrylate-acrylonitrile-butadienestyrene (MABS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 10366-2:2003 Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN 14103:2003 Fat and oil derivatives - Fatty acid methyl esters (FAME) - Determination of ester and linolenic acid methyl ester contents

European Committee for Standardization (CEN)

EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 10366-1:1999 Plastics - Methyl Methacrylate/Acrylonitrile/Butadiene/ Styrene (MABS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications ISO 10366-1:1993
EN ISO 19066-1:2014 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 19069-1:2015 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)

Lithuanian Standards Office

LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 10366-1:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 10366-1:2002)
LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

GCC Standardization Organization

GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
GSO ISO 10366-2:2013 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
GSO ISO 20299-3:2013 Film for wrapping rubber bales - Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)

Spanish Association for Standardization (UNE)

UNE-EN ISO 19065-2:2020 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
UNE-EN ISO 19066-1:2015 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19066-1:2014)
UNE-EN ISO 10366-1:2003 Plastics - Methyl methacrylate- acrylonitrile- butadiene- styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications. (ISO 10366- 1:2002)
AENOR UNE-EN ISO 19066-1:2015 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) molding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19066-1:2014)
UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

Danish Standards Foundation

DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DANSK DS/EN ISO 19066-1:2014 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 10366-1:2002 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DS/EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

CEN - European Committee for Standardization

EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
EN ISO 10366-1:2002 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

Swedish Institute for Standards

SS-EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
SS-EN ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
SS-EN ISO 19066-1:2014 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19066-1:2014)
SS-EN ISO 10366-1:2002 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 10366-1:2002)
SS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
SS-EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

Standards Norway

NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 10366-1:2002 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications (ISO 10366-1:2002)
NS-EN ISO 10366-1:1999 Plastics — Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications (ISO 10366-1:1993)
NS-EN ISO 19066-1:2014 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications (ISO 19066-1:2014)

International Organization for Standardization (ISO)

ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 19066-1:2014 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 10366-1:2002 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materialsPart 1:Designation system and basis for specifications
ISO 10366-1:1993 Plastics; methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials; part 1: designation system and basis for specifications
ISO 10366-2:2003 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 7246:1984 Pipes and fittings of acrylonitrile/styrene/ acrylester (ASA); General specification for moulding and extrusion materials
ISO 19066-2:2020 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 10366-2:1994 Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio

GM Daewoo

GMKOREA EDS-M-4308-2012 Acrylonitrile-styrene-acrylate copolymer

GM Holden Ltd

HOLDEN HN 1782-2012 ASA (Acrylonitrile-styrene-acrylate) Compounds and Blends
HOLDEN HN 1782-2001 ASA (Acrylonitrile - Styrene Acrylate) Compounds and Blends

Society of Automotive Engineers (SAE)

SAE J1685_200503 Classification System for Automotive Acrylonitrile/Butadiene/Styrene (ABS) and ABS + Polycarbonate Blends (ABS+PC) Based Plastics
SAE J1685_199505 Classification System for Automotive Acrylonitrile/Butadiene/Styrene (Abs) and ABS + Polycarbonate Blends (Abs+Pc) Based Plastics

GM Europe

GME QK 001244-1998 Acrylnitril-Butadien-Styrol-Terpolymerisat Methylmethacrylate-Acrylonitrile-Butadiene-Styrene-Polymer English Translation Available
GME QK 000221-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English Translation Available
GME QK 000220-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English Translation Available
GME QK 000172-2005 Acrylate-Styrene-Acrylonitrile Terpolymer English/German
GME QK 000242-2009 Acrylic Ester-Styrene-Acrylonitrile-Terpolymer (English/German)
GME QK 000234-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English/German

Association Francaise de Normalisation

NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF EN ISO 19066-1:2014 Plastics - Plastic (methyl methacrylate)-acrylonitrile-butadiene-styrene (MABS) materials for molding and extrusion - Part 1: designation system and basis of specifications
NF T60-703:2011 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents.
NF T53-038-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T53-038-2*NF EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...

Japanese Industrial Standards Committee (JISC)

JIS K 6938-1:2006 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
JIS K 6938-1:1999 Plastics -- Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
JIS K 6938-2:2007 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6938-2:1999 Plastics -- Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

Korean Agency for Technology and Standards (KATS)

KS M ISO 10366-1-2006(2011) Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 1：Designation system and basis for specifications
KS M ISO 19066-1-2022 Plastics ㅡ Methyl methacrylate-acrylonitrile- butadiene-styrene (MABS) moulding and extrusion materials ㅡ Part 1: Designation system and basis for specifications
KS M ISO 19066-1-2017(2022) Plastics ㅡ Methyl methacrylate-acrylonitrile- butadiene-styrene (MABS) moulding and extrusion materials ㅡ Part 1: Designation system and basis for specifications
KS M ISO 19066-1:2017 Plastics ㅡ Methyl methacrylate-acrylonitrile- butadiene-styrene (MABS) moulding and extrusion materials ㅡ Part 1: Designation system and basis for specifications
KS M ISO 20299-3-2022 Film for wrapping rubber bales－Part 3：Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
KS M ISO 10366-2:2006 Plastics-Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 10366-2:2016 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 10366-2-2016 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 10366-1-2016 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 1：Designation system and basis for specifications
KS M ISO 10366-2-2021 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 10366-2-2016(2021) Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 7246-2012(2017) Pipes and fittings of acrylonitrile/styrene/acrylester(ASA)－General specification for moulding and extrusion materials
KS M ISO 19066-1-2017 Plastics ㅡ Methyl methacrylate-acrylonitrile- butadiene-styrene (MABS) moulding and extrusion materials ㅡ Part 1: Designation system and basis for specifications

PL-PKN

PN C04627-02-1991 Water and waste water Tests for acrylonitryle Determination of acrylonitryle with mercaptoethanol method

GM North America

GM 9981472-2002 Adhesive Nitrile Vinyl Roof Cover
GM 9981217-1994 Adhesive - Nitrile - Vinyl Trim

GM Global

GMW 15582-2013 Acrylonitrile Butadiene Styrene and Polycarbonate Blend, Filled Issue 2; English

IX-EU/EC

(EU) No 2021-1098 Regarding 24-epibrassinolide, onion bulb extract, fenflufenate, fludioxonil, etilonil, sodium 5-nitroguaiacol, sodium o-nitrophenolate and sodium p-nitrophenolate in the section Maximum residue limits in or on agricultural products
(EU) No 491-2014 Amending Regulation (EC) No 396/2005 in Annexes II and III of pyraclostrobin, azoxystrobin, diphenacetate, cyfluthrin, dinotefuran, fenfenazole, fenvalerate, fludioxonil, fluopyram Amide, triflufenacil, triflufenacil, glufosinate-ammonium, imidacloprid, i

South African Bureau of Standard

SANS 54103:2007 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents

American Society for Testing and Materials (ASTM)

ASTM D6562-06 Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
ASTM D6562-00 Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
ASTM D6561-00 Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2-phenyl-1) Piperazine (MOPIP) in the Workplace
ASTM D6561-06 Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2-phenyl-1) Piperazine (MOPIP) in the Workplace
ASTM RR-D19-1187 2009 D7597-Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromat

RO-ASRO

STAS 9844/9-1976 TEXTILES Quantitative chemical analysis of ternary mixtures of wool, polyester and acrylic fibres

Association of German Mechanical Engineers

VDI 2457-6-81 VDI Guideline (VDI Directive): Gas emission measurement. Gas chromatographic determination of (n-), iso-, tert-butyl acetate

Others: Nitrile and Amino,Residues of myclobutanil and azoxystrobin,How to distinguish between keto and ester groups,ester group and water,Ester and Hydroxyl,Nitrile and Ester,cyano and nitrile