test test double open

test test double open, Total:438 items.

The international standard classification for "test test double open" includes: Information technology (IT) in general , Radiocommunications , Glass , Transistors , Application layer , Aircraft and space vehicles in general , Telephone equipment , Space systems and operations , Power stations in general .

The Chinese standard classification for "test test double open" includes: Information processing technology in general , Radio communication equipment , Material and component for instrument and meter , Power semiconductor device and parts , Telephone communication equipment , Opening and system interconnection of computer , Basic standards and general methods , Data communication equipment , Technical management , Technical management , Mobile communication equipment , Computer application , Electric power testing technique .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 39582-2020 Test open data services (TODS)
GB/T 12198-1990 Methods of measurement for pushbutton dialer with DTMF
GB/T 7962.5-1987 Colourless optical glass test methods--Middle stress birefringence
GB/T 18137.1-2000 Information technology--Open Systems Interconnection--Conformance test suite for the ACSE protocol --Part 1:Test suite structure and test purposes
GB/T 12197-1990 Methods of measurement for pushbutton telephone with DTMF
GB/T 7962.6-1987 Colourless optical glass test methods--Edge stress birefringence
GB/T 14077-1993 specification for birefractance crystal and polarizer
GB/T 3789.24-1991 Measurements of the electrical properties of transmitting tubes-Measuring methods of dual tone inter-modulation distortion of linear amplifier tubes
GB/T 42575-2023 Performance requirements and test methods for BDS dual model OEM board
GB/T 34089-2017 Test parameters and test methods for VHF/UHF frequency band radio monitoring and direction finding system in OATS
GB/T 17007-1997 Measuring methods for insulated-gate bipolar transistor

Professional Standard - Electron

SJ 20610-1996 Microwave circuits - Measuring methods for microwave switches
SJ/T 10439-1993 Test methods for bipolar transister DC parameter testers
SJ/T 10582-1994 Methods of measurement and test of vacuum switch tubes for low-voltage circuit breakers
SJ/T 10576-1994 Methods of measurment and test of vacuum switch tubes for vacuum contactors

Professional Standard - Post and Telecommunication

YD/T 6109-2024 5G Messaging Services - Dual-card Terminal test methods
YD/T 2412-2012 Test methods of WCDMA dual card dual active digital mobile station
YD/T 2681-2013 Test method for double-stacked firewall device
YD/T 3282-2017 Test parameters and test methods for HF band mobile radio monitoring and direction finding system in OATS
YD/T 1395-2009 Test Method of GSM/CDMA 1X Dual Mode Digital Mobile Station
YD/T 2780-2014 Test parameters and test methods for VHF/UHFfrequency band radio controlling system in OATS
YD/T 2863-2020 Test method of multimode dual-SIM dual-standby user equipment of LTE/WCDMA/GSM (GPRS)
YD/T 1395-2006 Test Method of GSM/CDMA 1X Dual Mode Digital Mobile Station
YD/T 2430-2012 Technical requirements for DT CQT record of TD-SCDMA/GSM
YD/T 4728-2024 5G multi-mode dual-SIM dual-standby terminal equipment test method
YD/T 1395-2005 Testing methods of GSM/CDMA 1x dual mode digital lmobile station
YD/T 2863-2015 Test method of multimode dual-SIM dual-standby user equipment of LTE/WCDMAGSM (GPRS)
YD/T 3613-2019 Test parameters and test methods for HF bandf ixed rad iomon itor ing and direction finding system in 0ATS
YD/T 2808-2015 Testing methods for Dual-Stack Lite
YD/T 2675-2013 Test parameter and test method for VHF/UHF radio monitoring direction finding system opening

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5878-2006 General specification for dual axis test table

Military Standard of the People's Republic of China-General Armament Department

GJB 9148-2017 Microwave circuit microwave switch test method
GJB 8617-2015 General specifications for biaxial test turntables

Professional Standard - Machinery

JB/T 7619-1994 Test Method for Two-way Triple Pole Thyristors

Professional Standard - Petroleum

SY/T 6814-2010 Calibration Method of the Double-channel Echo Instrument
SY 6814-2010 Calibration method of dual-channel echo tester

未注明发布机构

FORD FLTM BA 118-01-2021 FRICTION ELEMENT WELD SCHEDULE DEVELOPMENT ACCEPTANCE TEST
FORD FLTM BU 109-02-2021 COLD ADHESION TEST FOR DOUBLE FACED PRESSURE SENSITIVE TAPES

Group Standards of the People's Republic of China

T/ZSA 119-2022 Flexible electronic biaxial tensile analysis systems
T/LAPRA 107.1-2023 Opening force value tests for liquor packaging box Part 1: Pressing and pulling tests using external force

National Metrological Verification Regulations of the People's Republic of China

JJG(邮电) 032-1995 Verification rules for dual-tone multi-frequency telephone tester
JJG(交通) 100-2010 Automatic Testing System of Twin-wheel Sideway Force Coefficient
JJG 100-2020 Double-wheel lateral force friction coefficient automatic test system[
JJG(电子) 04008-1987 Trial Verification Regulations for QE1A Double-base Semiconductor Tube Tester
JJG(石油) 10-2000 Verification Regulation of Testing Instrument with Double-Channel Echo

Professional Standard - Aerospace

QJ 3048-1998 Specifications for Development of Testing Software in Device Testing Station

Professional Standard - Energy

NB/T 42007-2013 Bipolar Plate for Vanadium Flow Battery-test Method

National Metrological Technical Specifications of the People's Republic of China

JJF(机械)1019-2018 Calibration specifications for on-load tap-changer testers
JJF(机械) 1019-2018 Calibration specifications for on-load tap-changer testers

Professional Standard - Traffic

JT/T 778-2010 Automatic Testing System of Twin-wheel Sideway Force Coefficient

Professional Standard - Energy and Power Planning

DL/T 846.8-2004 General technical specifications for high voltage test equipments Part 8: Detector of on-load tap-changers
DL/T 846.9-2004 General technical specifications for high voltage test equipments Part 9: Vacuum interrupter detector
DL/T 846.3-2004 General technical specifications for high voltage test equipments Part 3: High voltage switch integrate detector
DL/T 846.8-2017 General technical specifications for high voltage test equipments Part 8:detector of on-load tap-changers

Association Francaise de Normalisation

NF E60-134-2*NF ISO 11090-2:2015 Test conditions for die sinking electro-discharge machines (die sinking EDM) - Testing of accuracy - Part 2 : double-column machines (slide-head type)
NF X30-418:2012 Waste - Determination of the coefficient of vertical permeability of a site by testing with an open-type double-ring infiltrometer
NF EN 60512-99-001:2013 Connectors for electronic equipment - Tests and measurements - Part 99-001: test program relating to connections and disconnections under electrical load - Test 99a: connectors used in twisted pair communications cabling...
NF V09-020*NF EN ISO 10399:2018 Sensory analysis - Methodology - Duo-trio test
NF ISO 7401:2004 Road vehicles - Lateral transient response test methods - Open loop test method
NF EN IEC 60512-99-002:2022 Connectors for electrical and electronic equipment Tests and measurements - Part 99-002: Endurance test programs - Test 99b: Test program for unmating under electrical load
NF X41-037*NF EN 12026:1996 Self adhesive tapes. Measurement of the unwinding force at high speed.
NF Z70-601-1:1993 Information technology. Open systems interconnection. Conformance test suite for the ASCE protocol. Part 1 : test suite structure and test purposes.
NF D62-015-2/IN1*NF EN 747-2/IN1:2015 Furniture - Bunk beds and high beds - Part 2 : test methods
NF D62-015-2*NF EN 747-2+A1:2015 Furniture - Bunk beds and high beds - Part 2 : test methods
NF G92-007:1989 School bags and bags - Test methods - Determination of the force required to tear off the carrying handles.

Military Standards (MIL-STD)

DOD A-A-54388-1991 TUBE, TRACHEOSTOMY, DOUBLE CUFF
DOD A-A-53432-1988 TEST SET, BINOCULAR VISION

PL-PKN

PN BN 6191-04-1963 Testing agent. hydrogen peroxide
PN M55705-1966 Machine-?ools Two column ci?cular saw Tes?ing of accuracy
PN C04595-02-1990 Water and waste water Test for lead Determination of lead by dithizone method
PN C04560-01-1991 Water and waste water Test for cadmium Determination of cadmium by dithizonemethod
PN C04596-01-1990 Water and waste waterTests for zinc Determination ol zinc by dithizone method
PN T06562-1971 Microwave measuring instruments Measuring lines General requirements and tests
PN D56217-1973 Woodworking machines Circular-sawing machines double sides Test of accuracy
PN E06153-1973 Low voltage switches and disconnecting switches Re?uirements and testing procedures
PN E04063-10-1987 On-load tap changers Test methods Service duty test
PN E06154-1973 Auxiliary switches and sets of low-voltage mechanical auxiliary switches General requirements and tests
PN E04063-11-1987 On-load tap-changers Test methods Mechanical endurance test
PN D56222-1991 Woodworking machines Double edging circular sawing machines Test of accuracy
PN P63456-1986 Textile machinery: Rotary spinning machines: Research
PN T90600-1964 High-frequency coaxial and symmetrical cables. Technical requirements and tests.
PN E04063-12-1987 On-load tap-changers Test methods Testing of motor-drive mechanism
PN D56246-1989 Woodworking machines Single and double ended tenoners Accuracy test
PN E04063-06-1987 On-Ioad tap changers Test methods Dielectric strength
PN M55684-1956 Closed planer and openside planning machines -- Testing of accuracy
PN N99902-05-1992 Procedures for the development and testing of public information symbols
PN H04626-1987 Corrosion of metals Determination of bimetallic corrosion in outdoor exposure corrosion test

Japanese Industrial Standards Committee (JISC)

JIS B 1761:2022 Evaluation and acceptance tests for double flank tester

Korean Agency for Technology and Standards (KATS)

KS B 6900-2013 Test code for double wall tank
KS B 6900-2003(2008) Test code for double wall tank
KS B 6900-2003 Test code for double wall tank
KS B 4907-1989 Test Methods for Performance and Accuracy of Tenoning Machines
KS B 4411-2020 Double sizers — Test and inspection methods
KS B 4005-1982 Test code for performance and accuracy of planing machines(double housing type)
KS B 4005-2007 Test code for performance and accuracy of planing machines(double housing type)
KS C 6904-2022 Test methods for optical switches
KS F 2632-2022 Doorsets－Repeated opening and closing test
KS C 6904-2002(2017) Test methods for optical switches
KS B 4403-2010 Double column type plano - milling machines - Testing of the accuracy
KS M 1970-2017 Diacetone alcohol for industrial use－List of methods of test
KS F 2275-2001 Performance test of hinges
KS B 4411-2014(2020) Double sizers — Test and inspection methods
KS C 4217-2006(2011) Switched reluctance motors
KS B 4411-2014 Double sizers — Test and inspection methods
KS R ISO 7401-2014(2019) Road vehicles — Lateral transient response test methods — Open-loop test methods
KS C 6050-1985(2000) MEASURING METHODS FOR BIPOLAR DIGITAL INTEGRATED CIRCUITS
KS C 6050-1985 MEASURING METHODS FOR BIPOLAR DIGITAL INTEGRATED CIRCUITS
KS C 4008-1981 Testing method for control operation switches
KS B 4411-2002 Double sizers-Test and inspection methods
KS D 0236-2003(2018) Stress corrosion cracking test for stainless steels
KS M 2079-2013 Testing method for oils of corrosiveness in a bi-metal couple
KS D 0236-1986 Stress corrosion cracking test for stainless steels
KS K 0751-2001 TESTING METHOD FOR DETERMINING APPARENT OPENING SIZE(AOS) OF GEOTEXTILE
KS B 4907-2013 Test Methods for Performance and Accuracy of Tenoning Machines
KS R 1064-2005(2020) Automobiles-general rules of test methods of switches
KS B ISO 11090-2:2020 Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy —Part 2: Double-column machines(slide-head type)

ECIA - Electronic Components Industry Association

EIA-448-24-1994 Test Method 24 Solid State Switch Transfer Tests
EIA-448-23-1990 Surface Mountable Switches@ Qualification Test
RS-448-1978 Standard Test Methods for Electromechanical Switches
EIA-448-1B-1993 Method 15 Standard Test Method for Electromechanical Switches (Test for Contact Bounce) (Addendum 1 to RS-448)
545-1989 Electromechanical Switch Test Method for Electrostatic Discharge (ESD)

Electronic Components, Assemblies and Materials Association

ECA 448-24-1994 Test Method 24 Solid State Switch Transfer Tests
ECA EIA-448-24-1994 Test Method 24 Solid State Switch Transfer Tests
ECA EIA-448-23-1990 Surface Mountable Switches, Qualification Test
ECA 448-1978 Standard Test Methods for Electromechanical Switches
ECA RS-448-1978 Standard Test Methods for Electromechanical Switches
ECA 448-1B-1993 Method 15 Standard Test Method for Electromechanical Switches (Test for Contact Bounce)
ECA 448-23-1990 Surface Mountable Switches, Qualification Test

Austrian Standards

ONORM S 4114-1982 Mountainering ropes; test of Single and double ropes; staue testmethods
ONORM M 4909-1989 Box wrenches, double head, deep offset with unequal openings; fest torques sehes A; marking of conformity
ONORM M 7507-1978 Testing of Space heaters; open testcabin
ONORM M 4913-1989 Engineers wrenches, double head, open end, with unequal jaw widths; fest torques series C; marking of conformity
ONORM M 4910-1989 Box wrenches, double head, modified offset with unequal openings; fest torques series A; marking of conformity
ONORM M 4906-1989 Box wrenches, double head, with unequal openings; flat and offset; test torques series B; marking of conformity
ONORM M 4903-1989 Engineers wrenches, double head, open end, with unequal jaw widths; test torques series D; marking of conformity
ONORM EN 747-2-1993 Furniture - Bunk beds for domestic use -Part 2: Test methods
ONORM B 3124 Teil.6-1982 Testing of natural stone; Mechanical properties of rock; Direct, dual plane, shear test

Magyar Szabványügyi Testület

MSZ 1580/5-1981 High voltage switch test
MSZ 1709/12-1983 Test open flow measurement liquid surface

IN-BIS

IS 2308-1963 Grooving machine test chart

GM North America

GM GM9605P-1990 Developmental Tests for Low Level Switching
GM GM9110P-1989 Procedure for Testing Switches

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C37.34e-1979 IEEE Standard Test Code for High-Voltage Air Switches, Switching-Impulse Testing of Extra-High-Voltage Switches
IEEE 167A.1-1995 Facsimile Test Chart: Bi-level (Black and White)
ANSI/IEEE C37.34b-1985 Standard Test Code for High-Voltage Air Switches, Ice Tests
IEEE Std C37.34b-1985 IEEE Standard Test Code for High-Voltage Air Switches, (Supplement: Ice Tests)
ANSI/IEEE C37.34d-1984 Standard Test Code for High-Voltage Air Switches, Mechanical Operations Test
IEEE Std C37.34d-1984 Standard Test Code for High-Voltage Air Switches, Mechanical Operations Test
IEEE 271 TRIAL-USE-1966 Technical Report on Switching Surge Testing of Extra-High-Voltage Switches
IEEE Std 167A.1-1995 IEEE Standard Facsimile Test Chart: Bilevel (Black and White)
IEEE No 271 IEEE Technical Report on Switching Surge Testing of Extra-High-Voltage Switches
IEEE C37.34E-1979 STANDARD TEST CODE FOR HIGH-VOLTAGE AIR SWITCHES (SUPPLEMENT: SWITCHING- IMPULSE TESTING OF EXTRA-HIGH-VOLTAGE SWITCHES) (SUPPLEMENT TO ANSI/IEEE C37.34-1971)
IEEE C12.9-1987 TEST SWITCHES FOR TRANSFORMER-RATED METERS
IEEE C12.9-1982 TEST SWITCHES FOR TRANSFORMER-RATED METERS
IEEE C37.34-1994 Standard Test Code for High-Voltage Air Switches
IEEE C37.34A-1978 STANDARD CORONA TESTS SUPPLEMENT TO ANSI/IEEE C37.34-1971 TEST CODE FOR HIGH- VOLTAGE AIR SWITCHES
IEEE Std C37.34a-1978 IEEE Standard Test Code for High-Voltage Air Switches, Corona Tests Supplement to ANSI/IEEE C37.34-1971
IEEE Std C37.34-1994 IEEE Standard Test Code for High-Voltage Air Switches
ANSI/IEEE Std C37.34a-1978 IEEE Standard Test Code for High-Voltage Air Switches, Corona Tests Supplement to ANSI/IEEE C37.34-1971
IEEE C37.34B-1985 STANDARD TEST CODE FOR HIGH-VOLTAGE AIR SWITCHES (SUPPLEMENT: ICE TESTS) (SUPPLEMENT TO ANSI/IEEE C37.34-1971
IEEE Std C37.301-2009 High-voltage switchgear (above 1000 V) test techniques - Partial discharge measurements

YU-JUS

JUS N.A5.760-1982 Basic environmental testing procedures. Test Na: Rapid change of temperature, two—chamber method
JUS N.A5.762-1982 Basic environmental testing procedures. Test Ne: Rapid ehange of temperature. Two water — bath me- thod
JUS N.S5.601-1990 Testing of single channeJ and maltichannel electrocardiographs
JUS N.R4.430-1978 Ekctromechanical components for electronic equipment. Test methods. Test 10a: Electrical overload (svritches)
JUS N.K5.051-1982 Low voltage control svvitches. General reguirements and tests

British Standards Institution (BSI)

BS ISO 9098-2:2023 Bunk beds and high beds. Safety requirements and tests - Test methods
BS PD EN 14035-10:2004 Fireworks-Double bangers. Specification and test methods
BS EN 747-2:2012+A1:2015 Furniture. Bunk beds and high beds. Test methods
BS 5762:1979 Methods for crack opening displacement (COD) testing
BS ISO/IEC 10739-1:1994 Information technology. Open Systems Interconnection-Test suite structure and test purposes
BS ISO/IEC 10170-1:1993 Information technology. Open systems interconnection. Conformance test suite for the FTAM protocol-Test suite structure and test purposes
22/30424792 DC BS ISO 9098-2. Bunk beds for domestic use. Safety requirements and tests. Part 2. Test methods
24/30503301 DC BS EN IEC 63569. High-level test description table for development of production test programs
BS EN 13523-7:2021 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS 6469-3-3.1:1992 Insulating and sheathing materials of electric cables. Methods of test specific to PVC compounds-Pressure test at high temperature. Tests for resistance to cracking
BS PD IEC/TR 62936:2016 Test method development. Guidelines for substance selection
BS ISO/IEC 10169-1:1991 Information technology. Open systems interconnection. Conformance test suite for the ACSE protocol-Test suite structure and test purposes
BS 4745:2005 Determination of the thermal resistance of textiles - Two-plate method: fixed pressure procedure, two-plate plate method: fixed opening procedure, and single-plate method
BS ISO/IEC 10168-1:1997 Information technology. Open systems interconnection. Conformance test suite for the session protocol-Test suite structure and test purposes
PD IEC/TR 62936:2016 Test method development. Guidelines for substance selection
BS ISO 14490-2:2005 Optics and optical instruments. Test methods for telescopic systems - Test methods for binocular systems
BS EN ISO 3377-2:2016 Leather. Physical and mechanical tests. Determination of tear load. Double edge tear
BS EN ISO 3378:2002 Leather. Physical and mechanical tests. Determination of resistance to grain cracking and grain crack index
BS ISO/IEC 10168-1:1998 Information technology. Open systems interconnection. Conformance test suite for the session protocol. Test suite structure and test purposes
BS ISO/IEC 9646-4:1991 Information technology. Open systems interconnection. Conformance testing methodology and framework-Test realization
BS EN ISO/IEC 9646-4:1996 Information technology. Open systems interconnection. Conformance testing methodology and framework-Test realization
BS EN 747-2:2024 Furniture — Bunk beds and high beds Part 2: Test methods
BS EN 62271-101:2006+A1:2010 High-voltage switchgear and controlgear. Synthetic testing
BS EN 62271-101:2006 High-voltage switchgear and controlgear - Synthetic testing
BS ISO/IEC 10729-1:1993 Information technology. Open Systems Interconnection. Conformance test suite for the presentation layer-Test suite structure and test purposes for the presentation protocol
BS ISO 7975:2019 Passenger cars. Braking in a turn. Open-loop test method
14/30288708 DC BS EN ISO 1288-2. Glass in building. Determination of the bending strength of glass. Part 2. Coaxial double-ring test on flat specimens with large test surface areas

IPC - Association Connecting Electronics Industries

IPC TM-650 5.5.1.14-1998 IPC-A-42 - Double Sided Test Pattern
IPC TM-650-MDP-2012 IPC Test Method Development Packet

Bureau of Indian Standards

IS 2308-1989 Test Chart For Slotting Machines
IS B196-1966 Atmospheric Conditions for Testing (Revised)(BI-LINGUAL)
IS 17128-3-2021 AUTOMOTIVE VEHICLES- VEHICLE DYNAMICS MEASUREMENTS TEST PROCEDURE PART-3: TRANSIENT RESPONSE TEST PROCEDURE OPEN LOOP AND CLOSED LOOP TEST
IS 2877-1986 Test chart for single and double column planing machines (Second Revision)
IS 8085-2-1999 Methods of Test for Footwear-2 Footwear Performance Test, Stiffness Test for Shanks, Lastometer Test for Cracking of Uppers; and Performance Test for Upper Fabrics, Coated Fabrics, Sock Lining and Other Lining Materials

Gosstandart of Russia

GOST R 50053-1992 Furniture. Methods for testing bunk beds
GOST 30210-2022 Furniture. Methods for testing bunk beds
GOST 33375-2015 Polymer composites. Test method for open-hole tension testing of specimens
GOST IEC 60811-3-1-2011 Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Pressure test at high temperature. Test for resistance to cracking

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM1312-2013 FASTENER TEST METHODS METHOD 13 DOUBLE SHEAR TEST (Rev 2)
AIA/NAS NASM1312-13-2013 FASTENER TEST METHODS METHOD 13 DOUBLE SHEAR TEST (Rev 2)
AIA/NAS NAM1312-113-2012 FASTENER TEST METHODS, METRIC METHOD 113 DOUBLE SHEAR TEST (Rev 1)
AIA/NAS NASM1312-13-2003 Fastener Test Methods; Method 13 Double Shear Test Rev 1
AIA/NAS NAM1312-113-1997 Fastener Test Methods, Metric; Method 113 Double Shear Test
AIA/NAS NASM1312-28-2012 FASTENER TEST METHODS METHOD 28 ELEVATED TEMPERATURE DOUBLE SHEAR

FI-SFS

SFS 5321-1987 Bunk bed. Security requirements. test

Ente Nazionale Italiano di Unificazione

UNI CEN/TS 16665:2014 Standing ladder durability test specification
UNI EN 3841-301:2006 Aerospace series - Circuit breakers - Test methods - Part 301: Voltage drop
UNI EN 3841-502:2006 Aerospace series - Circuit breakers - Test methods - Part 502: Operating forces
UNI CEI EN ISO/IEC 9646-4:1997 Information technology. Open Systems Interconnection - Conformance testing methodology and framework. Test realization.
UNI 5103:1962 Prism binoculars for civil use. Characteristics and tests.
EC 1-2009 UNI 8602:2005 Storage furnitures - Slam open/close test of doors
UNI EN 3841-504:2006 Aerospace series - Circuit breakers - Test methods - Part 504: Strength of mounting elements
UNI 8602:1984 Storage furnitures. Slam open/close test of doors.
UNI CEI ISO/IEC 10729-1:1995 Information technology. Open systems interconnection. Conformance test suite for the presentation layer. Test suite structure and test for the presentation protocol.
UNI EN 3841-302:2006 Aerospace series - Circuit breakers - Test methods - Part 302: Insulation resistance
UNI EN 17418:2021 Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification
UNI 8602:2005 Storage furnitures - Slam open/close test of doors

AIA/NAS - Aerospace Industries Association of America Inc.

NASM1312-13-2013 FASTENER TEST METHODS METHOD 13 DOUBLE SHEAR TEST (Rev 2)
NASM1312-13-1997 Fastener Test Methods; Method 13 Double Shear Test
NAM1312-113-2012 FASTENER TEST METHODS@ METRIC METHOD 113 DOUBLE SHEAR TEST (Rev 1)
NAM1312-113-1997 Fastener Test Methods@ Metric; Method 113 Double Shear Test
NASM1312-13-2003 Fastener Test Methods; Method 13 Double Shear Test (Rev 1)
NASM1312-28-1997 Fastener Test Methods; Method 28@ Elevated Temperature Double Shear

Aerospace Industries Association

AIA NAM1312-113-1997 Fastener Test Methods, Metric; Method 113 Double Shear Test FSC 53GP

AASHTO - American Association of State Highway and Transportation Officials

T 363-2017 Standard Method of Test for Evaluating Stress Development and Cracking Potential due to Restrained Volume Change Using a Dual Ring Test

Standards New Zealand

SAA/SNZ HB80:1996 Benchmarking Explained - A Guide for Undertaking and Implementing Benchmarking

American Society for Testing and Materials (ASTM)

ASTM D801-02(2009) Standard Test Methods for Sampling and Testing Dipentene
ASTM D801-02(2013) Standard Test Methods for Sampling and Testing Dipentene
ASTM D5413-93(1997) Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
ASTM RR-D02-1009 1974 D0092-Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM RR-D02-1008 1992 D0092-Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM E1124-10 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
ASTM F1577-05 Standard Test Methods for Detention Locks for Swinging Doors
ASTM F1577-05(2012) Standard Test Methods for Detention Locks for Swinging Doors
ASTM E1124-10(2024) Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
ASTM RR-E28-1024 2007 E2492-Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test
ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM RR-D01-1154 2010 D7488-Test Method for Open Time of Latex Paints
ASTM B478-85(2003) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM STP 1501-2008 Automotive Lubricant Testing and Additive Development
ASTM STP 537-1973 CRYOGENS AND GASES: TESTING METHODS AND STANDARDS DEVELOPMENT
ASTM D5243-92(2001) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
ASTM D3471-88 Standard Test Method for Top-Load-to-Engage Removal Lugs on Type IA Child-Resistant Closures
ASTM D5243-92(1996) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
ASTM D5243-92(2019) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts

The American Road & Transportation Builders Association

AASHTO T 363-2017 Standard Method of Test for Evaluating Stress Development and Cracking Potential due to Restrained Volume Change Using a Dual Ring Test

GCC Standardization Organization

GSO ISO 9098-2:2016 Bunk beds for domestic use -- Safety requirements and tests -- Part 2: Test methods
GSO ISO/TR 5924:2013 Fire tests -- Reaction to fire -- Smoke generated by building products (dual-chamber test)
GSO IEC 60512-99-001:2013 Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power
GSO ISO/TR 15658:2013 Fire resistance tests -- Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation
BH GSO ASTM D92:2024 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
GSO ISO/TS 3814:2015 Standard tests for measuring reaction-to-fire of products and materials -- Their development and application
GSO IEC 60512-13-1:2015 Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
GSO IEC 60811-509:2014 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
GSO ISO 11012:2015 Heavy commercial vehicles and buses -- Open-loop test methods for the quantification of on-centre handling -- Weave test and transition test
GSO ISO 22282-2:2016 Geotechnical investigation and testing -- Geohydraulic testing -- Part 2: Water permeability tests in a borehole using open systems
GSO IEC 60512-9-3:2015 Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load

German Institute for Standardization

DIN 50916-2:1985-09 Testing of copper alloys; stress corrosion cracking test using ammonia; testing of components
DIN EN ISO 10399:2018-04 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017); German version EN ISO 10399:2018
DIN 10971:2003-01 Sensory Analysis Double-blind Three-cup Test
DIN 4704-2:1999-10 Thermal testing of heating appliances - Part 2: Open test booth
DIN 42111-1:1980-02 Solid state switches; definitions, climatic test categories, measuring methods and testing procedures
DIN 50916-2:2023-07 Testing of copper alloys - Stress corrosion cracking test using ammonia - Part 2: Testing of components
DIN 42115-3:1988-08 Membrane switches; membrane-switch-arrays; ratings, requirements, tests
DIN 50916-2:2023 Testing of copper alloys - Stress corrosion cracking test using ammonia - Part 2: Testing of components
DIN 838:2007-09 Box wrenches, double head - Test torques series A
DIN 42111-1:1980 Solid state switches; definitions, climatic test categories, measuring methods and testing procedures
DIN 41636-1:1980-04 Sensitive switches for communication technology; climatic test categories, measuring methods and testing procedures
DIN 3110:2007-09 Engineers wrenches, double head - Test torques series C
DIN 50916-1 E 2022-7 Testing of copper alloys for ammonia stress corrosion cracking - Part 1: Testing of tubes, bars and sections
DIN 50916-1:1976-08 Testing of copper alloys; stress corrosion cracking test in ammonia, testing of tubes, rods and profiles
DIN 50916-2 E:2022 Draft Document - Testing of copper alloys - Stress corrosion cracking test using ammonia - Part 2: Testing of components
DIN EN 747-2:1993 Furniture; Bunk beds for domestic use; Part 2: Test methods
DIN 50916-2:2022-07 Draft Document - Testing of copper alloys - Stress corrosion cracking test using ammonia - Part 2: Testing of components
DIN EN 61196-1-116 E:2014-04 Unshielded twisted pair cables Part 1-42: Electrical test methods TDR test of characteristic impedance
DIN 3398-3:1982-11 Pressure cut-off switches for gaseous substances; requirements and testing
DIN 44954-2:1991-08 Electrical kitchen machines; tin openers; characteristics of performance, tests
DIN 51918:2018-07 Testing of carbonaceous materials - Determination of bulk density and the open porosity
DIN 51918:2012-12 Testing of carbonaceous materials - Determination of bulk density and the open porosity
DIN EN 747-2:2015-08 Furniture - Bunk beds and high beds - Part 2: Test methods; German version EN 747-2:2012+A1:2015 / Note: To be replaced by DIN EN 747-2 (2022-09).
DIN ISO 10399 E:2007 Draft Document - Sensory analysis - Methodology - Duo-trio-test (ISO 10399:2004)
DIN EN ISO 22282-2:2012-09 Geotechnical investigation and testing - Geohydraulic testing - Part 2: Water permeability tests in a borehole using open systems (ISO 22282-2:2012); German version EN ISO 22282-2:2012
DIN EN 1191:2013-04 Windows and doors - Resistance to repeated opening and closing - Test method; German version EN 1191:2012
DIN 13276 E 2022-7 Conical fittings from synthetic material Resistance to stress cracking
DIN ISO 14490-2:2006-08 Optics and optical instruments – Test methods for telescopic systems – Part 2: Test methods for binocular systems
DIN 42115-1:1988-08 Membrane switches; general; concepts, ratings, requirements, tests
DIN EN 747-2:2022-09 Furniture - Bunk beds and high beds - Part 2: Test methods; German and English version prEN 747-2:2022 / Note: Date of issue 2022-08-19*Intended as replacement for DIN EN 747-2 (2015-08).
DIN EN IEC 60512-99-002 E:2022 Draft Document - Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (IEC 48B/2881/CDV:2021); German and English version prEN I...
DIN EN IEC 60512-99-003 E:2023 Draft Document - Connectors for electrical and electronic equipment - Tests and measurements - Part 99-003: Endurance test schedules - Test 99c: Test schedule for balanced single-pair connectors unmating under electrical load (IEC 48B/2963/CD:2022); Te...

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 9098-2:2016 Bunk beds for domestic use -- Safety requirements and tests -- Part 2: Test methods
OS GSO ISO/TR 5924:2013 Fire tests -- Reaction to fire -- Smoke generated by building products (dual-chamber test)
OS GSO ISO 11012:2015 Heavy commercial vehicles and buses -- Open-loop test methods for the quantification of on-centre handling -- Weave test and transition test
OS GSO ISO 22282-2:2016 Geotechnical investigation and testing -- Geohydraulic testing -- Part 2: Water permeability tests in a borehole using open systems

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 72-1998 Method of Testing Open Refrigerators
ASHRAE CH-95-8-1995 Advances in Fenestration: Analysis and Testing
ASHRAE SD-95-10-1995 Durability Testing of Fenestration Systems
ASHRAE NO-94-14-1994 Advances in Fenestration Analysis and Testing
ASHRAE AT-96-1-1-1996 Development and Testing of a Prototype Tool for HVAC Control System Commissioning
ASHRAE CH-93-7-1993 Modeling and Testing of Thermal Performance of Fenestration Components
ASHRAE 72-1983 Method of Testing Open Refrigerators for Food Stores
ASHRAE AT-01-10-3-2001 Test of Measured Solar Heat Gain Variation in a Fenestration and Shade Combination with Respect to Test Specimen Tilt
ASHRAE OR-05-13-3-2005 Developing Component Models for Automated Functional Testing
ASHRAE 3868-1995 Development of a Test Facility for Airflow Measurements in Variable-Density Environments
ASHRAE AN-04-3-1-2004 Development and Testing of the Characteristic Curve Fan Model
ASHRAE 4762-2005 Development and Testing of an Integrated Daylighting Control System

CU-NC

NC 42-09-1987 Paper and Board Industry Determination of Tearing Strength. Testing Method

WRC - Welding Research Council

BULLETIN 530- TEST METHODS FOR HYDROGEN INDUCED CRACKING
BULLETIN 309-1985 DEVELOPMENT OF A PRODUCTION TEST PROCEDURE FOR GASKETS
BULLETIN 377-1992 DEVELOPMENT OF TEST PROCEDURES FOR FIRE RESISTANCE QUALIFICATION OF GASKETS

International Organization for Standardization (ISO)

ISO 9098-2:2023 Bunk beds and high beds — Safety requirements and tests — Part 2: Test methods
ISO/IEC 10169-1:1991 Information technology; Open Systems Interconnection; conformance test suite for the ACSE protocol; part 1: test suite structure and test purposes
ISO/IEC 10170-1:1993 Information technology - Open systems Interconnection - Conformance test suite for the FTAM Protocol - Part 1: Test suite structure and test purposes
ISO 7975:2019 Passenger cars — Braking in a turn — Open-loop test method
ISO 11090-2:2014 Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy — Part 2: Double-column machines (slide-head type)

Danish Standards Foundation

DANSK DS/ISO 9098-2:2023 Bunk beds and high beds – Safety requirements and tests – Part 2: Test methods
DS/EN ISO 10399:2010 Sensory analysis - Methodology - Duo-trio test
DS/EN 1288-2:2001 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
DANSK DS/EN ISO 10399:2018 Sensory analysis – Methodology – Duo-trio test (ISO 10399:2017)
DANSK DS/IEC TR 62936:2016 Test method development – Guidelines for substance selection
DANSK DS/EN ISO 22282-2:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 2: Water permeability tests in a borehole using open systems
DANSK DS/EN 13523-7:2014 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
DS/EN 13523-7:2021 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)

Society of Automotive Engineers (SAE)

SAE ARP8830-2023 Procedure for Development of a Test Method
SAE R-344-2009 An Introduction to Engine Testing and Development
SAE J3314_202412 Hydraulic Hose Pin Hole Sleeve Testing Information Toward Development of a Test Method
SAE J3314-2024 Hydraulic Hose Pin Hole Sleeve Testing Information Toward Development of a Test Method
SAE ARP5825A Design Requirements and Test Procedures for Dual Mode Exterior Lights
SAE ARP5825B Design Requirements and Test Procedures for Dual Mode Exterior Lights
SAE ARP5825 Design Requirements and Test Procedures for Dual Mode Exterior Lights
SAE ARINC625-3-2012 INDUSTRY GUIDE FOR COMPONENT TEST DEVELOPMENT AND MANAGEMENT
SAE ARINC625-4-2020 INDUSTRY GUIDE FOR COMPONENT TEST DEVELOPMENT AND MANAGEMENT
SAE ARINC625-3 INDUSTRY GUIDE FOR COMPONENT TEST DEVELOPMENT AND MANAGEMENT
SAE ARINC625-4 INDUSTRY GUIDE FOR COMPONENT TEST DEVELOPMENT AND MANAGEMENT
SAE J3252-2023 Process for Developing an Interoperable Cooperative Driving Use Case Test Framework and Test Procedures
SAE ARP5825A-2016 Design Requirements and Test Procedures for Dual Mode Exterior Lights
SAE ARP5825B-2023 Design Requirements and Test Procedures for Dual Mode Exterior Lights
SAE AMS3146 J68-2017 Tests for Snowmobile Switching Devices and Components

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO/TR 5924:2016 Fire tests -- Reaction to fire -- Smoke generated by building products (dual-chamber test)

Spanish Association for Standardization (UNE)

UNE 16521:2002 Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Technical specifications and tests.
UNE-EN ISO 10399:2018 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
UNE 15600-2:2005 Machine-tools. Test conditions for die sinking eletro-discharge machines (EDM). Terminology and testing of accuracy. Part 2: Two column machines (slide head type and cross slide table type)
UNE-EN 1597-2:1998 WELDING CONSUMABLES. TEST METHODS. PART 2: PREPARATION OF TEST PIECE FOR SINGLE-RUN AND TWO-RUN TECHNIQUE TEST SPECIMENS IN STEEL.
UNE-EN ISO 10399:2010 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2004)
UNE-EN 747-2:2012+A1:2015 Furniture - Bunk beds and high beds - Part 2: Test methods
UNE-EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test).
AENOR UNE-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)

SE-SIS

SIS SMS 1191-1970 Fire fighting equipment. Double-acting stirrup pumps. Testing
SIS SS 03 15 32-1991 Procedures for the development and testing ofpublic information symbols

Canadian Standards Association (CSA)

CAN/CSA-O132.2.3-1990(C2003) Mis à essai et vérification des portes planes en bois

South African Bureau of Standard

SANS 15794:2007 Bi-directional and multi-directional fork-lift trucks - Stability tests

European Telecommunications Standards Institute (ETSI)

ETSI EG 203 130 V1.1.1 (2013-04)-2013 Methods for Testing and Specification (MTS); Model-Based Testing (MBT); Methodology for standardized test specification development

Swedish Institute for Standards

SS-ISO 15794:2001 Bi-directional and multi-directional fork-lift trucks - Stability tests
SS-EN 13523-7:2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
SS 31532:1991 Procedure for the development and testing of public information symbols
SS-ISO 13209-4:2021 Road vehicles — Open Test sequence eXchange format (OTX) — Part 4: Expanded extensions interface definition (ISO 13209-4:2021, IDT)

European Committee for Electrotechnical Standardization（CENELEC）

EN 61071-2:1996 Power Electronic Capacitors Part 2: Requirements for Disconnecting Test on Fuses@ Destruction Test@ Self-Healing Test and Endurance Test

JP-JEITA

JEITA RC 9131B-2007 Test methods of switching power supplies (AC-DC)

CZ-CSN

CSN 27 7011-1966 Shověl excavators. Testing and delivery
CSN 66 8102 Cast.22-1997 Smokeless powder. Test Methods. Ash content determination for two-component dust
CSN 35 3054-1964 Impulse-voltage tests of electrical switching apparatuses
CSN 56 0186-15-1995 Methods of test for beer. Determination of diacetyl and other vicinal diketones
CSN 66 8102 Cast.22-1978 Smokeless powders. Methods of testing. Determination of ashes in double-base powders
CSN 35 0016-1971 Breakaway torque test of rotating electrical machinery

American Gear Manufacturers Association

AGMA 22FTM01 Development of a New Test Method to Investigate the Scuffing Load Carrying Capacity of Hypoid Gear Oils
AGMA 22FTM01-2022 Development of a New Test Method to Investigate the Scuffing Load Carrying Capacity of Hypoid Gear Oils
AGMA 2116-B24 Evaluation of Double Flank Testers for Radial Composite Measurement of Gears
AGMA 2116-A05-2005 Evaluation of Double Flank Testers for Radial Composite Measurement of Gears

Standard Association of Australia （SAA）

AS 3127:1987 Approval and test specification - Cord-line switches
AS C133:1941 Approval and test specification for switches (other than wall switches)
AS C133:1954 Approval and test specification for switches (other than wall switches)
AS 3127:1974 Approval and test specification for cord-line switches
AS C113:1950 Approval and test specification for wall switches
AS C113:1955 Approval and test specification for wall switches
AS C113:1952 Approval and test specification for wall switches
AS 3127:1983 Approval and test specification for cord-line switches
AS C113:1947 Approval and test specification for wall switches
AS C113:1951 Approval and test specification for wall switches
AS C127:1947 Approval and test specification for cord-line switches
AS C127:1948 Approval and test specification for cord-line switches
AS 3133:1989 Approval and test specification - Air break switches
AS C127:1963 Approval and test specification for cord-line switches
AS 3133:2020 Approval and test specification — Air-break switches
AS C127:1954 Approval and test specification for cord-line switches
AS 2542.2.4:2014 Sensory analysis, Part 2.4: Methodology — Duo-trio test
AS 1635.8.2:1974 Methods of testing pressure sensitive adhesive tape - Length of double faced tape

ETSI - European Telecommunications Standards Institute

EG 203 130-2013 Methods for Testing and Specification (MTS); Model-Based Testing (MBT); Methodology for standardized test specification development (V1.1.1)

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 3133:2013 Approval and Testing Specifications for Air Switches
AS/NZS 3133:2013/AMD 1:2014 Approval and Testing Specifications for Air Switches
AS/NZS 3127:2002 Approval and test specification - Cord-line switches
AS/NZS 4150.1:1993 Information technology - Open Systems Interconnection - Conformance test suite for the ACSE protocol - Test suite structure and test purposes
AS/NZS 4218.1:1994 Information technology - Open Systems Interconnection - Conformance test suite for the FTAM protocol - Test suite structure and test purposes
AS/NZS 3133:2013(R2014) Approval and Testing Specifications for Air Switches
AS/NZS 4222.1:1994 Information technology - Open Systems Interconnection - Conformance test suite for the presentation layer - Test suite structure and test purposes for the presentation protocol
AS/NZS 4103.4:1993 Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Test realization
AS/NZS 3133:2008 Approval and test specification - Air-break switches

American National Standards Institute （ANSI)

ANSI/ASTM F1605:2014 Standard Test Method for Performance of Double-Sided Griddles
ANSI C12.9-2005 Test Switches for Transformer-Rated Meters
ANSI/TIA-1152-2009 Requirements for Field Test Instruments and Measurements for Balanced Twisted-Pair Cabling

American Welding Society (AWS)

WRC 309:1985 Development of a Production Test Procedure for Gaskets
WRC 377:1992 Development of Test Procedures for Fire Resistance Qualification of Gaskets

International Electrotechnical Commission (IEC)

IEC 60267:1968 Guide to the testing of circuit-breakers with respect to out-of-phase switching

Standards Norway

NS-EN 1288-2:2000 Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double ring test on flat specimens with large test surface areas
NS-EN 747-2:1993 Furniture — Bunk beds for domestic use — Part 2: Test methods
NS-EN 14035-10:2004 Fireworks — Part 10: Double Bangers — Specification and test methods
NS-EN 747-2:2012 Furniture - Bunk beds and high beds - Part 2: Test methods

Lithuanian Standards Office

LST EN 1288-2-2002 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
LST EN ISO 10399:2010 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2004)

American Water Works Association (AWWA)

AWWA WQTC65975 Development of a Rapid Bioluminescent AOC Test
AWWA JAW20173 Journal AWWA — Developing Haloform Formation Potential Tests
AWWA ACE90031 Pilot Tests at Fort Worth to Meet the New Drinking Water Regulations
AWWA ACE58261 Pilot Testing Membranes to Achieve SWTR Compliance for the City of Healdsburg
AWWA WQTC60770 Development of Low Cost Method(s) for NDMA Analysis: Round-Robin Testing

National Electrical Manufacturers Association（NEMA)

NEMA C12.9-2005 Test Switches for Transformer-Rated Meters
NEMA ICS P10.2-2009 White Paper Guide on Qualification Testing of Transfer Switches
NEMA ICS P10.2-2023 White Paper Guide on Qualification Testing of Transfer Switches

(U.S.) Telecommunications Industries Association

TIA-1152-A-2016 Requirements for Field Test Instruments and Measurements for Balanced Twisted-Pair Cabling
TIA-1152-2009 Requirements for Field Test Instruments and Measurements for Balanced Twisted-Pair Cabling

European Committee for Standardization (CEN)

EN ISO 22282-2:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 2: Water permeability tests in a borehole using open systems (ISO 22282-2:2012)
EN 14035-10:2004 Fireworks - Part 10: Double Bangers - Specification and test methods
CEN EN 13523-7-2001 Coil Coated Metals - Test Methods - Part 7: Resistance to Cracking on Bending (T-Bend Test)
EN 747-2:2024 Furniture - Bunk beds and high beds - Part 2: Test methods

Indonesia Standards

SNI 09-1265-1989 Perangkat kunci pintu dua tahap kendaraan bermotor, Cara uji
SNI 6874:2012 Cara uji sifat dispersif tanah lempung dengan hidrometer ganda
SNI 06-4421-1997 Test methods of chemical oxygen by open reflux

PT-IPQ

NP EN 1597-2-2000 Welding consumables Test methods Part 2:Preparation of test piece for single-run and two-run techinique test specimens in steel

GM Global

GMW 14906-2011 Lamp Development and Validation Test Procedures Issue 4; English

Aeronautical Radio Inc.

ARINC REPORT 625-3-2012 Industry Guide for Component Test Development and Management

ISUZU - Isuzu Motors Ltd.

INDEX VOLUME 3-2007 MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)

National Association of Corrosion Engineers (NACE)

NACE Paper 11439-2018 Environmental testing of hot isostatically pressed and rolled duplex stainless steels

Comitato Elettrotecnico Italiano

CEI EN 60512-16-13:2010 Connectors for electronic equipment - Tests and measurements Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Unwrapping, solderless wrapped connections

Association of German Mechanical Engineers

VDI/VDE 2606-1988 Pruefung von Waelzfraesern fuer Stirnraeder (Zylinderraeder) mit Evolventenprofil