relative atom of zn

relative atom of zn, Total:107 items.

The international standard classification for "relative atom of zn" includes: Products of the chemical industry in general , Test conditions and procedures in general , Aliphatic hydrocarbons , Chemical analysis , Medical Sciences and health care facilities in general , Surface active agents .

The Chinese standard classification for "relative atom of zn" includes: Basic standards and general methods for dye , Basic standards and general methods , Surface active agent , Diagnostic standard for public nuisance diseases .

National Metrological Verification Regulations of the People's Republic of China

JJG 1151-2018 Liquid Chromatograph-Atomic Fluorescence Spectrometers
JJG 1151-2025 Verification procedures for liquid chromatography-atomic fluorescence spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 27760-2011 Test method for calibrating the z-magnification of an atomic force microscope at subnanometer displacement levels using Si(111) monatomic step
GB/T 27594-2011 Disperse dyestuffs - Determination of relative strength of presscakes - Spectrophotometer method
GB/T 5113-1985 Atomic mass unit and kilogram conversion tables
GB/T 13530.3-1992 Sodium ethoxylated alkyl sulfate--Determination of the mean relative molecular mass
GB/T 17282-1998 Method for estimation of molecular weight (relative molecular mass) of petroleum oils from viscosity measurements

Jilin Provincial Standard of the People's Republic of China

DB22/T 1985-2013 Determination of Inorganic Arsenic in Feed by Liquid Chromatography-Atomic Fluorescence Spectrometry
DB22/T 2205-2014 Determination of Alkyl Mercury in Wastewater by Liquid Chromatography-Atomic Fluorescence Method
DB22/T 2464-2016 Determination of methylmercury in water by liquid chromatography-atomic fluorescence method

Taiwan Provincial Standard of the People's Republic of China

CNS 7211-1983 Contrast of Terminal of Three - Phase Induction Motors

Professional Standard - Chemical Industry

HG/T 2894-1997 Determination Method of Relative Strength of Presscakes of Disperse Dyes

Professional Standard - Rare Earth

XB/T 619-2015 Chemical analysis methods of ion type rare earth ore. Determination of total rare earth ion phase

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 562-2013 Water Quality Determination of Alkyl Mercury by Liquid Chromatography-Atomic Fluorescence

Professional Standard - Commodity Inspection

SN/T 3002-2011 Determination of Relative Molecular Weight and Molecular Weight Distribution of Polyethylene. Gel Permeation Chromatography Method

Professional Standard - Energy

NB/SH/T 6024-2021 Standard test method for determination of relative crystallinity of zeolite ZSM-5 X-ray diffraction
NB/SH/T 6058-2022 Standard test method for determination of the relative crystallinity of zeolite ZSM-22 X-ray diffraction

Professional Standard - Hygiene

WS/T 635-2018 Determination of urinary arsenic speciation - liquid chromatography-atomic fluorescence spectrometry

Professional Standard - Light Industry

QB/T 2345-2013 Determination of mean relative molecular weight of alkyldimethylbetain by GC

Indonesia Standards

SNI 6989.7:2009 Air dan air limbah - Bagian 7: Cara uji seng (Zn) secara Spektrofotometri Serapan Atom (SSA)-nyala
SNI 06-6992.8-2004 Sediment - Part 8: Test methods of zinc (Zn) with acid destruction by atomic absorption spectrophotometers (AAS)
SNI 06-6989.43-2005 Water and wastewater - Part 43: Test methods of zinc (Zn) content with atomic absorption spectrophotometers (AAS) by extraction
SNI 06-6989.44-2005 Water and waste water - Part 44: Test methods of zinc (Zn) content with atomic absorption spectrophotometers (AAS) by carbon stoves
SNI 7854:2013 Metode pengujian kadar logam tembaga (Cu), seng (Zn), besi (Fe) dalam daging, telur, susu, dan olahannya dengan menggunakan Spektrofotometer Serapan Atom (SSA)
SNI 7854-2013 Metode pengujian kadar logam tembaga (Cu), seng (Zn), besi (Fe) dalam daging, telur, susu, dan olahannya dengan menggunakan Spektrofotometer Serapan Atom (SSA)
SNI 13-6974-2003 For example, in sulfide rocks, the contents of lead (Pb), copper (Cu), zinc (Zn), iron (Fe), manganese (Mn), and cadmium (Cd) are determined using atomic absorption spectrophotometry (AAS).

British Standards Institution (BSI)

BS ISO 7215:1995 Iron ores. Determination of relative reducibility
BS 6829-3.1:1989 Analysis of surface active agents (raw materials). Sodium alkylbenzenesulphonates. Method for determination of mean relative molecular mass
BS 6829-3-3.1:1987 Analysis of surface active agents (raw materials). Sodium alkylbenzenesulphonates.-Method for determination of mean relative molecular mass
BS PD ISO/IEC GUIDE 46:2017 Comparative testing of consumer products and related services. General principles
25/30495190 DC BS ISO 19383 Atomic layer deposition - Chemical characteristics and related process specifications of atomic layer deposition precursors
BS 6829-2-2.2:1987 Analysis of surface active agents (raw materials). Alkane sulphonates.-Method for determination of mean relative molecular mass of alkane monosulphonates
BS 6829-5.2:1989 Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for estimation of mean relative molecular mass
BS ISO 18329:2004 Milk and milk products - Determination of furosine content - Ion-pair reverse-phase high-performance liquid chromatography method
BS 6829-2.2:1989 Analysis of surface active agents (raw materials). Alkane sulphonates. Method for determination of mean relative molecular mass and content of alkane monosulphonates
BS PD IEC TR 61508-3-3:2025 Functional safety of electrical/electronic/programmable electronic safety-related systems - Object-oriented software in safety-related systems
25/30456747 DC BS ISO 13825 Petroleum and related products - Determination of arsenic in crude petroleum using atomic fluorescence spectrometry

International Telecommunication Union (ITU)

ITU-R TF.458-3-1998 International Comparisons of Atomic Time Scales

International Organization for Standardization (ISO)

ISO 7215:1985 Iron ores; Determination of relative reducibility
ISO 7215:1995 Iron ores - Determination of relative reducibility
ISO 18329:2004 Milk and milk products - Determination of furosine content - Ion-pair reverse-phase high-performance liquid chromatography method
ISO 18329:2004|IDF 193:2004 Determination of furosine content in milk and dairy products by ion-pair reversed-phase high-performance liquid chromatography
ISO 18329:2004 | IDF 193:2004 Milk and milk products — Determination of furosine content — Ion-pair reverse-phase high-performance liquid chromatography method

Gosstandart of Russia

GOST 28658-1990 Iron ores. Determination of relative reducibility
GOST R 51619-2000 The alcohol production and raw material for it producing. Method for determination of relative density
GOST 32081-2013 The alcohol production and raw material for it producing. Method for determination of relative density
GOST 31950-2012 Water. Method for determination of total mercury by flameless atomic absorption spectrometry
GOST 31870-2012 Drinking water. Determination of elements content by atomic spectrometry methods
GOST R 51069-1997 Crude petroleum and petroleum products. Determination of density, relative density and API gravity. Hydrometer method

Czech Standards Institute (UNMZ)

CSN ISO 7215:1993 Iron ores. Determination of realtive reducibility
CSN 65 2467-1981 Sodíum Chloride (Salt) Method of Potassium Content Determination by Atomic
CSN 40 4010-1971 Relative measurements of activity and partical emission of radioactive products. Speciíic activity relative measurements in liquid saturated layer.
CSN 65 2475-1981 Sodium Chloride (Salt) Method of Atomie Absorption Spectroscophy of Copper Content Determination
CSN 68 4134-1987 Determination of small amounts of che- ical elements by atomic absorption pectrometry
CSN 65 2469-1981 Sodium Chloride (Salt) Method of Iron Content Determination by Atomic Absorption Spektrography
CSN 65 2463-1981 Sodmm Chloride [Salt] Determination of Calcium and Magnesium Content by Atomic Absorption Spektroskopy Method.

Association of German Mechanical Engineers

VDI 2268 BLATT 1-1987 Determination of substances in particles; determination of the elements Ba, Be, Cd, Co, Cr, Cu, Ni, Pb, Sr, V, Zn in emitted dusts using atomic spectrometric methods
VDI 2268 BLATT 1-1987 Determination of substances in particles; determination of the elements Ba, Be, Cd, Co, Cr, Cu, Ni, Pb, Sr, V, Zn in emitted dusts using atomic spectrometric methods

Magyar Szabványügyi Testület

MNOSZ 4856-1952 Electric cutting raw materials. internal relative measurement
MSZ 9200/6.lap-1969 Electronic signal comparison. Identical and alternative systems

South African Bureau of Standard

SANS 5844:2006 Particle and relative densities of aggregates

American Petroleum Institute (API)

API MPMS 11.1 VOL IV-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume IV Table 23A - Generalized Crude Oils Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24A - Generalized Crude Oils Correction of Vo

American Society for Testing and Materials (ASTM)

ASTM D1298-24 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM E2530-06 Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps
ASTM D4192-97 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
ASTM D7623-10 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM D4191-97 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
ASTM F2170-19a Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
ASTM D7691-11e1 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry 40;ICP-AES41;
ASTM F2170-16b Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
ASTM D7691-16 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM RR-D02-1716 2011 D7691-Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM F2170-19 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
ASTM F2170-18 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
ASTM D7691-23 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM F2170-17 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
ASTM F2170-16a Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
ASTM D4085-93(1997) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM D4085-93(2003) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry

National Association of Corrosion Engineers (NACE)

NACE Paper 11060-2011 Effect of crude oil chemistry on corrosion inhibition and phase wetting
NACE Paper 03149-2009 Effect of crude oil chemistry on corrosion inhibition and phase wetting

Spanish Association for Standardization (UNE)

UNE 104-281 Pt.1-2-1986 Relative density method of asphalt and modified asphalt raw materials
UNE 64022:1970 MIXED FEEDS AND RAW MATERIALS. PREPARATION OF THE SAMPLE FOR THE ANALYSIS OF MINERALS: ZN, CO, CU, FE AND MO.
UNE 22-135-1988 Quantification of magnesium in iron minerals by atomic absorption technique
UNE 22-134-1988 Quantification of calcium in iron minerals by atomic absorption technique
UNE 84174:1995 ESSENTIAL OILS. EVALUATION OF THE ABSOLUTE AND RELATIVE DENSITY OF ESSENTIAL OILS. (ELECTRONIC DENSITYMETER METHOD).
UNE 55-806-1990 Determination of relative molecular mass of linear sodium alkylphenyl sulfate detergent by gas-liquid chromatography

Ente Nazionale Italiano di Unificazione

UNI 8406:1982 Raw materials for paints and varnishes. Comparison of relative tinting strenght and colour on reduction of pigments.
UNI 6169-1968 Magnesium; aluminum; zinc; manganese primary alloy for pressure casting castings (AI 8.5%-Zn 0.6%-Mn 0.2%)
UNI EN ISO 3675:1997 Crude petroleum and liquid petroleum products. Laboratory determination of density or relative density. Hydrometer method.

Association Francaise de Normalisation

NF U42-194*NF EN 16197:2013 Fertilizers - Determination of magnesium by atomic absorption spectrometry
FD T90-112:1998 Water quality - Determination of eight metallic elements (Mn, Fe , Co, Ni, Cu, Zn, Ag, Pb) by flame atomic absorption spectrometry - Direct and after complexing and extraction determination methods

German Institute for Standardization

DIN 32992-3:1987 Cost information Cost calculation principles Determination of relative cost figures
DIN 55603:2003 Testing of pigments - Determination of relative tinting strength and of colour difference on reduction of inorganic pigments using the lightness method

IX-IX-ISO

ISO 13825:2025 Petroleum and related products — Determination of arsenic in crude petroleum using atomic fluorescence spectrometry

BELST

STB 1933-2009 Wine production and wine raw material. Method for determination of relative density

Korean Agency for Technology and Standards (KATS)

KS D 1679-2020 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
KS B 5410-1982 Methods of measurement for vignetting factor and relative focal plane illuminance
KS B 5410-2013(2018) Methods of measurement for vignetting factor and relative focal plane illuminance
KS B 5410-2023 Measurement method for vignetting factor and relative illuminance of photographic lenses

Aeronautical Radio Inc.

ARINC 654 ITEM 10.0 System and Sub-System Interconnections - Design Philosophy

Bureau of Indian Standards

IS 11292-1985 Method for determination of relative reducing properties of iron oxide: lump ores, sinter and pellets

European Committee for Standardization (CEN)

EN ISO 5961:1995 Water Quality - Determination of Cadmium by Atomic Absorption Spectrometry (ISO 5961 : 1994)

Danish Standards Foundation

DANSK DS/ISO 18329:2004 Milk and milk products - Determination of furosine content - Ion-pair reverse-phase high-performance liquid chromatography method
DS/ISO 18329:2004 Milk and milk products - Determination of furosine content - Ion-pair reverse-phase high-performance liquid chromatography method

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 18329:2014 Milk and milk products -- Determination of furosine content -- Ion-pair reverse-phase high-performance liquid chromatography method

GCC Standardization Organization

GSO ISO 18114:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of relative sensitivity factors from ion-implanted reference materials