surface outgassing

surface outgassing, Total:97 items.

The international standard classification for "surface outgassing" includes: Non-ferrous metals , Other non-ferrous metals and their alloys , Surface treatment , Pollution, pollution control and conservation , Surface preparation , Aircraft and space vehicles in general , Exploratory and extraction equipment .

The Chinese standard classification for "surface outgassing" includes: Rare metals and their alloys analysis method , Vessel technology , Environmental protection equipment , Material Protection , Spacecraft .

Group Standards of the People's Republic of China

T/CAB 0068-2020 Sterilization requirements and test methods for refrigerator food surface
T/CASME 1623-2024 Copper surface oxide film scraping machine

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 35183-2017 Vertical shaft surface aerator
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated s
GB/T 23602-2009 Methods of descaling and cleaning for titanium and titanium alloy surfaces
GB/T 38986-2020 Methods of descaling and cleaning for zirconium and zirconium alloy surfaces
GB/T 8923-1988 Rust grades and preparation grades of steel surfaces before application of paints and related products

Professional Standard - Aerospace

QJ 2624-1994 Cleanliness Requirements and Depollution of Satellite Optical Surface

Professional Standard - Petroleum

SY/T 5612.1-1999 Solid control system for drilling fluid -- Degasser

Professional Standard - Environmental Protection Certification Specification

HCRJ 023-1998 Surface aerator

Professional Standard - Machinery

JB/T 10670-2014 Inverted-umbrella Type Surface Aerator
JB/T 10670-2006 Inverted-umbrella type surface aerator

American Water Works Association (AWWA)

AWWA ACE93158 Full-Scale Evaluation of Mechanical Surface Aeration for TCE Removal
AWWA MTC64577 Assessment of the Efficiency of Air-Water Flushing for the Removal of Biomass from Surfaces in a Laboratory Test
AWWA JAW72574 Journal AWWA — Characterization of Filter Media MnOx[s] Surfaces and Mn Removal Capability
AWWA ACE70885 A Design Basis for Establishing the Surface Loading Rate through an Iron-Removing Biological Filter
AWWA ACE65504 Predicting NOM Removal and Particle Destabilization with Surface Complexation Modeling
AWWA ACE61658 Arsenic Removal Using Iron-Enhanced Activated Alumina: An Examination of Surface Characteristics

Society of Automotive Engineers (SAE)

SAE AMS1640A-1987 CORROSION REMOVING COMPOUND For Aircraft Surfaces
SAE AMS1640C-2011 Corrosion Removing Compound for Aircraft Surfaces
SAE AMS1640-1979 Corrosion Removing Compound for Aircraft Surfaces
SAE AMS1640B-2000 Corrosion Removing Compound For Aircraft Surfaces
SAE AMS1640D-2024 Corrosion Removing Compound for Aircraft Surfaces
SAE AMS1640A Corrosion Removing Compound, for Aircraft Surfaces
SAE AMS1640B Corrosion Removing Compound, for Aircraft Surfaces
SAE AMS1640C Corrosion Removing Compound, for Aircraft Surfaces
SAE AMS1640D Corrosion Removing Compound, for Aircraft Surfaces
SAE AMS1640 Corrosion Removing Compound, for Aircraft Surfaces
SAE AMS1532 Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off, Emulsion-Type
SAE AMS1532B Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off, Emulsion-Type
SAE AMS1532C Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off, Emulsion-Type
SAE AMS1532A Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off, Emulsion-Type
SAE AMS1532D Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off, Emulsion-Type
SAE AIR6232 Aircraft Surface Coating Interaction with Aircraft Deicing/Anti-Icing Fluids
SAE AIR6232-2013 Aircraft Surface Coating Interaction with Aircraft Deicing/Anti-Icing Fluids
SAE AIR6232-2019 Aircraft Surface Coating Interaction with Aircraft Deicing/Anti-Icing Fluids

German Welding Society

DVS 2307-1:1999-01 Surface degreasing and cleaning

Deutsche Vereinigung für Wasserwirtschaft, Abwasser und Abfall e. V. (DWA)

DWA-M 715:2007-06 Oil removal on traffic surfaces

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC 7711 3.7.1.1-1998 Gull Wing Removal (Four-Sided) Bridge Fill Method - Surface Tension
IPC 7711 4.1.3-1998 Surface Solder Removal Braid Method
IPC 7711 3.7.2.1-1998 Gull Wing Removal (Four-Sided) Solder Wrap Method - Surface Tension
IPC 7711 3.7.3.1-1998 Gull Wing Removal (Four-Sided) Flux Application Method - Surface Tension
IPC 7711 3.8.1.1-1998 J-Lead Removal Bridge Fill Method - Surface Tension
IPC 7711 3.7.7-1998 Gull Wing Removal (Four-Sided) Hot Gas (Air) Reflow Method
IPC 7711 3.8.2.1-1998 J-Lead Removal Solder Wrap Method - Surface Tension

The Society for Protective Coatings (SSPC)

SSPC SP 16-2020 Brush-Off Blast Cleaning of Coated and Uncoated Galvanized Steel, Stainless Steels, and Non-Ferrous Metals
SSPC GUIDE 6-2004 Guide for Containing Surface Preparation Debris Generated During Paint Removal Operations
GUIDE 6-2004 Guide for Containing Surface Preparation Debris Generated During Paint Removal Operations

American Society for Testing and Materials (ASTM)

ASTM D6215-98a Standard Guide for Removal of Oily Soils from Metal Surfaces
ASTM B600-11(2017) Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
ASTM B614-16(2021) Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
ASTM B600-11 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
ASTM B614-95(2000) Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
ASTM B614-16 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces

Korean Agency for Technology and Standards (KATS)

KS A ISO 9271:2003 Decontamination of radioactively contaminated surfaces－Testing of decontamination agents for textiles
KS A ISO 9271-2003(2023) Decontamination of radioactively contaminated surfaces - testing of decontaminants for textiles
KS A 4440-2002 Decontamination of radioactively contaminated surface-Method for testing and assessing the ease of decontamination
KS A 4440-1982 Decontamination of radioactively contaminated surface-Method for testing and assessing the ease of decontamination

U.S. Military Regulations and Norms

ARMY MIL-A-60091 B (1)-1993 ADHESIVE FOR BONDING DEMOLITION CHARGES TO STRUCTURAL SURFACES
ARMY MIL-A-60091 B-1988 ADHESIVE FOR BONDING DEMOLITION CHARGES TO STRUCTURAL SURFACES

Aerospace Industries Association/ANSI Aerospace Standards

NAS1697-1979 Backshell@ Electrical Connector@ 90 Degree Strain Relief@ Conductive Finish (Rev 1)

Ente Nazionale Italiano di Unificazione

UNI EN ISO 21171:2006 Medical gloves - Determination of removable surface powder
UNI EN 12271-3:2002 Surface dressing - Specifications - Rate of spread and accuracy of spread of binders and chippings

Belgian Standards Institute

NBN-EN 311-1992 Sawdust board. Remove the chipboard surface. experimental method

GCC Standardization Organization

GSO ISO 21171:2008 Medical gloves - Determination of removable surface powder
BH GSO ISO 21171:2024 Medical gloves - Determination of removable surface powder
GSO ISO 11076:2015 Aircraft -- De-icing/anti-icing methods on the ground

German Institute for Standardization

DIN 25415:2012 Radioactively contaminated surfaces - Method for testing and assessing the ease of decontamination
DIN EN ISO 21171:2006-08 Medical gloves - Determination of removable surface powder (ISO 21171:2006); German version EN ISO 21171:2006
DIN 25425-5:1994 Radioisotope laboratories - Rules for the decontamination of surfaces
DIN 25415-1:1988 Decontamination of radioactively contaminated surfaces; method for testing and assessing the ease of decontamination

Danish Standards Foundation

DS/EN ISO 21171:2006 Medical gloves - Determination of removable surface powder
DANSK DS/EN ISO 21171:2006 Medical gloves - Determination of removable surface powder

British Standards Institution (BSI)

BS ISO 24261-2:2021 Fine bubble technology. Elimination method for sample characterization. Fine bubble elimination techniques
BS 37:1915 Electricity meters (excluding electrolytic meters)
20/30413917 DC BS ISO 24261-2. Fine bubble technology. Elimination method for sample characterization - Part 2. Fine bubble elimination techniques

Gosstandart of Russia

GOST R 52031-2003 Passenger cars. Defrosting and demisting systems for glazed surfaces. Technical requirements. Tests methods
GOST 33096-2014 Goods of household chemistry. Method for determination of efficiency of rust removal from solid surface

Standard Association of Australia （SAA）

AS 1627.1:2003 Metal finishing - Preparation and pretreatment of surfaces - Removal of oil, grease and related contaimination
AS 1627.5:1994 Metal finishing - Preparation and pretreatment of surfaces - Pickling, descaling and oxide removal
AS 1627.1:2003(R2017) Metal finishing - Preparation and pretreatment of surfaces - Removal of oil, grease and related contaimination

International Organization for Standardization (ISO)

ISO 24261-2:2021 Fine bubble technology - Elimination method for sample characterization - Part 2: Fine bubble elimination techniques

International Electrotechnical Commission (IEC)

IEC 60862-2:1991 Surface acoustic wave (SAW) filters; part 2: guide to the use of surface acoustic wave filters (chapter III)

Military Standards (MIL-STD)

MIL-T-5842B NOTICE 1-2019 Transparent Areas On Aircraft Surfaces (Windshields And Canopies), Rain Removing And Washing Systems For, De-Frosting, De-Icing, Defogging, General Specification For
MIL-T-5842B(AS)-1985 TRANSPARENT AREAS ON AIRCRAFT SURFACES(WINDSHIELDS AND CANOPIES),RAIN REMOVING ANDWASHING SYSTEMS FOR, DE-FROSTING, DE-ICING,DEFOGGING,GENERAL SPECIFICATION FOR
MIL MIL-T-5842B-1985 TRANSPARENT AREAS ON AIRCRAFT SURFACES (WINDSHIELDS AND CANOPIES), RAIN REMOVING AND WASHING SYSTEMS FOR, DE-FROSTING, DE-ICING, DEFOGGING, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-T-5842A)

Spanish Association for Standardization (UNE)

UNE-EN ISO 21171:2007 Medical gloves - Determination of removable surface powder (ISO 21171:2006)
AENOR UNE-EN ISO 21171:2007 Medical gloves - Determination of removable surface powder (ISO 21171:2006)

Swedish Institute for Standards

SS-EN ISO 21171:2006 Medical gloves - Determination of removable surface powder (ISO 21171:2006)

National Association of Corrosion Engineers (NACE)

NACE AMPP SP21511-1-2024 Laser Ablation for Surface Preparation of Ferrous Metals, Pulsed Laser

Standards Norway

NS-EN ISO 21171:2006 Medical gloves — Determination of removable surface powder (ISO 21171:2006)

Lithuanian Standards Office

LST EN ISO 21171:2006 Medical gloves - Determination of removable surface powder (ISO 21171:2006)

Bureau of Indian Standards

IS 12828-1989 Recommended Practice For Descaling And Cleaning Titanium And Titanium Alloy Surfaces

Association of German Mechanical Engineers

VDI 3401 BLATT 1-1993 Electrochemical machining; form machining
VDI 4708 BLATT 2-2019 Pressure maintenance@ venting@ deaeration - Venting and deaeration

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE OR-16-C032-2016 Using Patterned Surface Wettability for Improved Frosting/Defrosting Performance

Japanese Industrial Standards Committee (JISC)

JIS K 3921:2019 Test methods for floor cleaners -- Surface cleaner and remover