novel phenotype

novel phenotype, Total:158 items.

The international standard classification for "novel phenotype" includes: Ventilation and air-conditioning systems , Applications of information technology in general , Fluorescent lamps. Discharge lamps , Education , Starch and derived products .

The Chinese standard classification for "novel phenotype" includes: Building heating and ventilation and air conditioning instrument and equipment , Information processing technology in general , Electric lighting in general , Special instruments for teaching , Other fermented goods , Temperature and pressure instrument .

Group Standards of the People's Republic of China

T/SA 50-2022 Technical specification for new resin type artificial stone production equipment
T/TCMCA 0029-2024 New seal toothed chain
T/CIPR 109-2023 New wheel hub with good braking performance
T/ZZB 2988-2022 Full heat type heat recovery fresh air unit
T/CEEAS 004-2022 Evaluation Standard for New Entity Enterprises
T/CAQI 201-2021 Air distributor for small-scale ventilation system
T/AIITRE 20001-2021 Digital transformation—Guidance for enhanced capability system construction
T/QGCML 3917-2024 New explosion-proof crushing and granulating machine
T/QGCML 2623-2023 New high-strength elastic covered yarn
T/SHZSAQS 00201-2023 Technical specifications for linear identification of new type of dairy and meat cattle
T/CIRA 29-2022 Irradiation dose requirement for 2019-nCoV inactivation on cold chain food surfaces
T/PPZL 023-2024 Novel blended animal fats and oils
T/QGCML 2316-2023 New energy storage element smart energy meter
T/ZZB 2460-2021 Outdoor air clean ventilator for sterilization 2021
T/CIPR 0019-2023 New eccentric hemispherical valve
T/CAQI 64-2019 Small-scale air purification system duct
T/CAQI 197-2021 Nano-copper technology Anti-SARS-CoV-2 daily protective mask
T/QGCML 3332-2024 New LED light strip quick connection structure
T/SHZSAQS 00200-2023 Technical regulations for evaluation of new milk-meat dual-purpose beef types
T/HEBQIA 095-2022 PMC new solid fuel
T/CHBAS 28-2023 Water-swellable sealing tape (new raw material tape)
T/QGCML 713-2023 New film coated nano filter bag
T/QGCML 4562-2024 New Commercial Furnace
T/CES 001-2018 Technical guideline for typical power supply modes to the new-type towns distribution network
T/QGCML 1855-2023 New prefabricated building high-strength bolts
T/QGCML 3133-2024 New electrical appliances moisture-proof and dust-proof control box
T/NTJGXH 052-2019 Cultivation and management norms for new professional farmers
T/CIPR 056-2022 New type wheel hub with good brake performance
T/SDBDA 22-2021 Innovative database interface specification
T/CIPR 0019-2022 New Type Eccentric Hemisphere Valve
T/QGCML 974-2023 New Cosmetic Processing and Grinding Device
T/ZZAS 014-2021 New packaging system
T/QGCML 1995-2023 Technical specifications for the production of new storage cabinets

未注明发布机构

AS/NZS 4586:2004(R2005) Slip Resistance of Classification of New Pedestrian Surface Materials
AS 4586:2013/Amdt 1:2017 Anti-slip ratings of new pedestrian surface materials

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 33356-2022 Evaluation indicators for new-type smart cities
GB/T 33356-2016e Evaluation indicators for new-type smart cities
GB/T 43560-2023 New-type urbanization—Guidelines for evaluation of innovative city
GB/T 33356-2016(英文版) Evaluation indicators for new type smart cities
GB/T 20153-2006 Classification and interpretation of new lighting products

Hebei Provincial Standard of the People's Republic of China

DB13/T 306-1997 new liquor

Beijing Provincial Standard of the People's Republic of China

DB11/T 1748-2020 Technical Specifications for Collection of Novel Coronavirus Samples on Object Surfaces

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 3791-2015 Evaluation Standards for New Types of Xinjiang Brown Beef
DB65/T 3267-2011 Linear identification of Xinjiang brown cattle body shape
DB65/T 2482-1994 Xinjiang meat and wool double-purpose semi-fine wool sheep

Professional Standard - Education

JY/T 0061-2019 The model of clock

石家庄市质量技术监督局

DB1301/T 298-2018 New professional farmer training standards

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35945-2018 Terminology in biological fermentation industry
GB/T 33356-2016 Evaluation indicators for new-type smart cities

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1505-2021 Technical Specifications for New Capability Identification of Digitally Transformed Enterprises
DB61/T 1506-2021 Implementation Guide for Identifying New Capabilities in Digitally Transformed Enterprises

Shanxi Provincial Standard of the People's Republic of China

DB1403/T 5-2020 New Smart City Creation Requirements

Professional Standard - Railway

TB/T 1872-1987 DBD type turnout indicator light DBT type derailment indicator light

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 3513-2023 New convenience store grade evaluation indicators

Professional Standard - Medicine

YY 91092-1999 Phaenotype magnetic medical apparatus

Professional Standard - Aviation

HB 5944.3-1986 Aviation Pressure Meter - Type and Basic Dimension of Small-sized Pressure Meter

Military Standard of the People's Republic of China-General Armament Department

GJB 9924-2021 Specifications for new mixed hydrazine (XT-1) propellant
GJB 8771-2015 Specification for new gas mask filter paper

Professional Standard - Machinery

JB/T 12327-2015 Fresh air units with prepare cooling and heat recovery

Standard Association of Australia （SAA）

AS 4586:2013 Anti-slip ratings of new pedestrian surface materials

CZ-CSN

CSN 08 1161-1990 Heaters, surface, regenerative. Types. Fundamental parameters
CSN 25 4262-1961 Screw gauges. Measuring parts of reference gauges for new ring thread "go" gauges. Cycle thread

SCC

AWWA ACE63135 A Small System's Challenge: Developing a New Surface Water Supply
AWWA WQTC57001 Evaluating Novel and Innovative Adsorbents for Arsenic Removal Through Effective Characterization Schemes
AS D31:1973 New pneumatic passenger car tyres
AWWA ACE94052 PAWATER, A Financial Planning Model for New, Small Community Systems
AWWA ACE93019 PAWATER, A Financial Planning Model for New, Small Community Systems
MIL MIL-PRF-23419/1M-2015 Fuses, Instrument Type, Style FM01 (Indicating)
MIL MIL-PRF-23419/1L-2012 Fuses, Instrument Type, Style FM01 (Indicating)
AWWA MTC69758 Novel Performance Modeling of Forward Osmosis / Reverse Osmosis Integrated System
AWWA ACE92106 New and Improved Dewatering Techniques
AWWA WQTC60601 A New Anti-Terrorism Tool for Water Protection
AWWA WQTC60550 Breaking New Ground: Large Membrane Water Plants
AWWA ACE63072 A Look at New Commercial Water Saving Technologies
AWWA JTMGT57471 Skill Based Pay Update — Eight Years Later
CAN/CSA Z241 SERIES-2003(R2018) Park Model Trailers, Includes Update No. 1 (2005), Update No. 2 (2013)
AWWA ACE56252 Small Treatment Plant Technology in the Face of New Surface Water Treatment and Disinfection Byproduct Rules
AWWA JAW64269 Journal AWWA — Development of a Novel Iron Release Flux Model for Distribution Systems
AWWA ACE94218 A New Breed of Treatment Plants Meets Today's Challenges
VDI/VDE 3693 BLATT 1:2016 Virtual commissioning — model types and glossary
MIL MIL-PRF-23419/1J-1998 FUSES, INSTRUMENT TYPE STYLE FM01 (INDICATING) (SUPERSEDING MIL-F-23419/1H)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4382-2000 New Quasi-Static Cogeneration Model
ASHRAE SF-98-18-3-1998 New Absorption Heat Pump
ASHRAE QC-06-015-2006 A New Generation of Zonal Models
ASHRAE TO-98-22-2-1998 Hygrothermal Performance of a New Light Gauge Steel-Framed Envelope System
ASHRAE 4561-2002 A Numerical Simulation Study of a New Environmental Chamber

ACI - American Concrete Institute

ACI SP-312-2016 Novel Characterization Techniques and Advanced Cementitious Materials: Tribute to James J. Beaudoin

US-FCR

FCR 21 CFR PART 520-2013 ORAL DOSAGE FORM NEW ANIMAL DRUGS
FCR 21 CFR PART 520-2014 ORAL DOSAGE FORM NEW ANIMAL DRUGS
FCR 40 CFR PART 1037-2015 CONTROL OF EMISSIONS FROM NEW HEAVY-DUTY MOTOR VEHICLES
FCR 40 CFR PART 1037-2014 CONTROL OF EMISSIONS FROM NEW HEAVY-DUTY MOTOR VEHICLES
FCR 21 CFR PART 520-2015 ORAL DOSAGE FORM NEW ANIMAL DRUGS
FCR 40 CFR PART 1037-2013 CONTROL OF EMISSIONS FROM NEW HEAVY-DUTY MOTOR VEHICLES
FCR 21 CFR PART 529-2014 CERTAIN OTHER DOSAGE FORM NEW ANIMAL DRUGS
FCR 21 CFR PART 529-2015 CERTAIN OTHER DOSAGE FORM NEW ANIMAL DRUGS
FCR 21 CFR PART 529-2013 CERTAIN OTHER DOSAGE FORM NEW ANIMAL DRUGS
FCR 21 CFR PART 526-2014 INTRAMAMMARY DOSAGE FORM NEW ANIMAL DRUGS
FCR 21 CFR PART 524-2013 OPHTHALMIC AND TOPICAL DOSAGE FORM NEW ANIMAL DRUGS
FCR 21 CFR PART 524-2014 OPHTHALMIC AND TOPICAL DOSAGE FORM NEW ANIMAL DRUGS
FCR 40 CFR PART 1048-2014 CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES
FCR 21 CFR PART 526-2015 INTRAMAMMARY DOSAGE FORM NEW ANIMAL DRUGS
FCR 21 CFR PART 526-2013 INTRAMAMMARY DOSAGE FORM NEW ANIMAL DRUGS
FCR 40 CFR PART 1048-2015 CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES
FCR 21 CFR PART 524-2015 OPHTHALMIC AND TOPICAL DOSAGE FORM NEW ANIMAL DRUGS
FCR 40 CFR PART 1048-2013 CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES

Defense Logistics Agency

DLA MS35824 REV D (1)-2002 HINGE, CONTINUOUS (PIANO) .050 THICKNESS, .187 PIN DIA
DLA MS35824 REV D-1989 HINGE, CONTINUOUS (PIANO) .050 THICKNESS, .187 PIN DIA

IX-ICAO

ICAO CIRCULAR 305-2004 Operation of New Larger Aeroplanes at Existing Aerodromes Corrigendum: 03/14/2005

GSO

GSO ASTM D7826:2016 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
OS GSO ASTM D7826:2016 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
BH GSO ASTM D7826:2017 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
BH GSO ISO 9939:2017 Aerospace -- Pressure re-oiling connection (new type)

NZ-SNZ

NZS 5453:1989 New Tyres for Passenger Vehicles

American National Standards Institute （ANSI)

ANSI/TIA/EIA 455-186-1991 Proposed New FOTP, Gauge Retention Force Measurement for the Fiber Optic Components

Society of Automotive Engineers (SAE)

SAE AS34021A-1998 FSC 5935; Should Be Used for New Design Instead of MS3402, Which Was Inactivated for New Design on January 8, 1999 FSC 5935; Should Be Used for New Design Instead of MS3402, Which Was Inactivated for New Design on January 8, 1999
SAE AMS1532-1978 CLEANER FOR AIRCRAFT EXTERIOR SURFACES Wipe-on, Wipe-off, Emulsion-Type
SAE AMS1532C-2001 Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off, Emulsion-Type
SAE AMS1532B-2000 CLEANER FOR AIRCRAFT EXTERIOR SURFACES Wipe-On, Wipe-Off, Emulsion-Type

American Society for Testing and Materials (ASTM)

ASTM D7826-24 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
ASTM D7826-21 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
ASTM D7826-15 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
ASTM D7396-14(2020) Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting

Military Standards (MIL-STD)

DOD A-A-53753-1988 MANIKIN, RESUSCITATION TRAINING

SE-SIS

SIS SMS 1652-1956 Tubular rivets, representing tube type, RRN and PRN types

IETF - Internet Engineering Task Force

RFC 5967-2010 The application/pkcs10 Media Type (Updates: 2986)

VDI - Verein Deutscher Ingenieure

VDI 2902 Blatt 2.2.2-1982 Checklists for design: Medium- and major dies; checklist: mechanized medium- and major dies
VDI 2902 Blatt 2.2.5-1986 Checklists for design: medium- and major dies; checklist: form- and restrike dies
VDI 2902 Blatt 2.2.8-1986 Checklists for design: medium- and major dies; Checklist: die setting sheet
VDI/VDE 3693 BLATT 1-2015 Virtual commissioning - Model types and glossary