Municipal Engineering Laboratory

Municipal Engineering Laboratory, Total:473 items.

The international standard classification for "Municipal Engineering Laboratory" includes: Accident and disaster control , Natural fibres , Graphical symbols for use on specific equipment , Tobacco, tobacco products and related equipment , Test conditions and procedures in general , Ventilators. Fans. Air-conditioners , Laboratory medicine , Laboratory ware and related apparatus , Energy and heat transfer engineering in general .

The Chinese standard classification for "Municipal Engineering Laboratory" includes: Labor safety technology in general , Standardization and quality management , Power supply and distribution engineering , Landscaping and city appearance sanitation , Bridge and culvert engineering , Codification , Tobacco curing in general , Comprehensive Technology , Compressor and fan , Medical laboratory equipment , Daily use glass products , Physical property analyzer , Technical management .

Group Standards of the People's Republic of China

T/SCETIA 1001-2021 Specification for inter-laboratory comparison of construction engineering testing
T/QGCML 1069-2023 Artificial Intelligence Laboratory Construction Specifications
T/CECS 895-2021 Construction and acceptance regulations of urban comprehensive pipe gallery
T/CASMES 152-2023 Code for construction and acceptance of plant engineering in city and town
T/ZS 0628-2024 Technical specification for door setting of BSL- 2 laboratory
T/LAIA 01-2024 Green Testing Laboratory Evaluation of Chemical Testing Laboratory
T/SAME 001-2022 Management requirements for level II biosafety cabinets in clinical laboratories
T/SXITS 0013-2024 Practical training operating procedures for rapid testing laboratories in school canteens
T/CECS 1467-2023 Technical regulations for the construction of artificial environment laboratories
T/CCSAS 005-2019 Chemical and chemical laboratory safety management regulations
T/SDCEAS 10003-2021 Acceptance standard for construction quality of urban tunnel engineering
T/ZSM 0003-2021 Requirements for remote intelligent control shelter metrology laboratory
T/SDTES 009-2023 Specification for cocoon notarization inspection on laboratory?
T/CMEA 7-2020 Standard for engineering construction and acceptance of sponge city
T/CCSAS 011-2021 Guidelines of safety assessment for chemistry and chemical engineering laboratories
T/CASME 1497-2024 Municipal road engineering urban drainage well construction and acceptance requirements
T/QGCML 1118-2023 Artificial Intelligence Laboratory Construction Specifications
T/CECS 644-2019 Technical specification for constant temperature and humidity laboratory engineering
T/SDUWA 5001-2022 "Urban Sewage Treatment Unit Laboratory Grade Evaluation Standards"
T/YJX 005-2023 Grade evaluation for clean room engineer
T/CITS 0019-2023 Specification for grade evaluation of digital laboratories
T/DGAEPI 004-2023 Guidelines for management of wastewater self-monitoring laboratory for pollution sources in Dongguan
T/CSIQ 8015-2018 Criteria for laboratory grading evaluation
T/CECS 662-2020 Architectureal Technical Standard for BSL-2 Laboratory in Medical Facilities
T/CMBA 024-2024 General requirements for biosafety level 2 laboratory operation and management
T/CACE 004-2016 Guideline for evaluation of circular economy engineering laboratory of China
T/CDIIDA 001-2020 Specification for IOT engineering technology training room
T/CBDA 19-2018 Technical specification for real quantity measurement of housing interior decoration
T/CECS 1283-2023 Building materials laboratory smart testing technical regulations
T/CCSA 364-2022 Requirements for security baseline verification of high-level biological laboratory
T/CECS 1492-2023 Technical regulations for high-level biosafety laboratory control systems
T/SHAAV 002-2020 Sampling procedure for canine and feline laboratory examination
T/CITS 0114-2024 Guideline of biosafety level 2 laboratory construction procedure
T/CECS 770-2020 Engineering technical specification for physicochemical laboratory
T/CESS 10-2022 General Requirements for Ergonomics Laboratories of Sleep system
T/CECS 849-2021 Geometric quantity measurement laboratory engineering technical regulations
T/AHQTA 004-2023 Laboratory information management system inspection process management
T/CCSAS 050-2024 Guide to writing safety operating procedures for chemicals in chemical engineering laboratories
T/CASME 1499-2024 Code for construction and acceptance of urban power cables in municipal road engineering construction
T/CECS G：E36-01-2023 Technical Specifications for Safety of Mobile Laboratory of Highway Engineering

Liaoning Provincial Standard of the People's Republic of China

DB2101/T 0011-2019 Shenyang Sponge City Construction Construction and Acceptance Regulations
DB21/T 2132-2013 General Technical Specifications for Mobile Laboratories for Condition Testing of Construction Machinery
DB21/T 2295-2014 Implementation Rules for Construction Quality Acceptance of Municipal Engineering

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 4090-2021 Specification for cotton notarization inspection on laboratory
DB3204/T 1038-2022 Farmer's Market Rapid Inspection Laboratory Management Specifications
DB32/T 4071-2021 Construction and acceptance regulations for urban landscape lighting projects

Shaanxi Provincial Standard of the People's Republic of China

DB6107/T 42-2023 Specifications for the Construction of Food Rapid Inspection Laboratory of Hanzhong City Market Supervision Institute

Professional Standard - Urban Construction

CJJ/T 82-1999 Code for Construction and Acceptance of Plant Engineering in City and Town
CJJ 89-2001 Specification for Construction and Inspection of Urban Road Lighting Engineering
CJJ 89-2012 Specification for construction and inspection of urban road lighting engineering
CJJ 9-1985 Standard for quality test and estimation of municipal engineerings (flood protection)
CJJ 44-91 Code for construction and acceptance of urban road subgrade engineering
CJJ 2-2008 Code for Construction and Quality Acceptance of Bridge Works in City
CJJ 9-85 Quality Inspection and Evaluation Standards for Municipal Engineering (Urban Flood Control Engineering)
CJJ 18-1988 Technical level standard for workers of construction maintenance and sewerage treatment of municipal engineering
CJJ 44-1991 Code for construction and acceptance of municipal road base works

Hunan Provincial Standard of the People's Republic of China

DB43/T 1970-2020 Technical regulations for laboratory breeding of chironomids
DB43/T 1967-2020 Duckweed laboratory culture technical operating procedures
DB43/T 1952-2020 Technical regulations for artificial breeding of peach aphids in laboratory

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33710-2017 Mobile laboratory -- Method for classification and gradation

Professional Standard - Tobacco

YC/T 291-2009 Ambient condition of tobacco grading laboratory

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/Z 30154-2013 Medical laboratories—Guidance on laboratory implementation of GB/T 22576—2008
GB 11415-1989 Laboratory Sintered (Porous) Filter Pore Size, Classification and Designation
GB/T 34877.2-2023 Industrial fans—Determination of fan sound power levels under standardized laboratory conditions—Part 2:Reverberant room method
GB/T 11415-1989 Laboratory sintered(fritted) filters-Porosity grading, classification and designation
GB/T 11165-1989 Laboratory pH meter
GB/T 37986-2019 General technical specification for mobile laboratory of engineering test
GB/T 32146.2-2015(英文版) "Technical requirements of design and construction for inspection and testing laboratory—Part 2: Electrical laboratory"
GB 50857-2013 Standard method of measurement for public utilities works
GB 51237-2017 Technical code for initiating explosive device test building engineering

Professional Standard - Commodity Inspection

SN/T 3902-2014 General requirements for biosafety level Ⅱ laboratories of inspection and quarantine
SN/T 4248-2015 Technical specification for safety testing laboratorory of light industrial products-Ceramic laboratorory
SN/T 3253.2-2015 Test method of sanitary wares - Part 2: For 1oad resistance

Ningxia Provincial Standard of the People's Republic of China

DB64/T 1867-2023 Guidelines for Classified Construction of Food Rapid Testing Laboratories
DB64/T 1868-2023 Specifications for the construction of county-level food testing laboratories

Guangdong Provincial Standard of the People's Republic of China

DB4416/T 13-2021 Specifications for the construction and management of rapid testing laboratories for farmers' markets
DB4401/T 3-2018 Code for construction and acceptance of urban comprehensive pipe gallery project
DB4403/T 339-2023 City-level real-life 3D data specification

Professional Standard - Agriculture

CNAS-AL23-2020 Relationship between good laboratory practice and laboratory accreditation
水产品质量安全检验手册 1.1.2.1-2005 Chapter 1 General Introduction Section 1 Laboratory Management 2. Basic requirements of laboratories (1) General requirements for physical and chemical laboratory work
水产品质量安全检验手册 1.1.2.2-2005 Chapter 1 General Introduction Section 1 Laboratory Management 2. Basic Requirements of the Laboratory (2) General Requirements for Microbiological Laboratory Work
JJG(烟草) 21-2003 Tobacco Laboratory Testing Regulations for Strong Wind Environment

Beijing Provincial Standard of the People's Republic of China

DB11/T 2099-2023 Construction Quality Acceptance Standards for Urban (Suburban) Railway Engineering Civil Engineering
DB11/T 1102-2014 Urban rail transit project planning verification measurement regulations
DB11/T 212-2003 code for construction and acceptance of landscape engineering in city and town
DB11/ 1072-2014 Construction Quality Inspection Standards for Urban Bridge Engineering
DB11/T 1886-2021 Code for acceptance of construction quality of urban (suburban) railway track engineering
DB11/T 2236-2024 Construction and acceptance procedures for sponge city water storage projects
DB11/T 1073-2014 Construction quality inspection standard for urban road engineering

National Metrological Verification Regulations of the People's Republic of China

JJG 119-1984 Verification Regulation for Laboratory pH Meters
JJG 757-2018 Laboratory Ion Meters
JJG(烟草)21-2010 Tobacco—Verification Regulation of Atmosphere Condition for Laboratory
JJG(烟草) 21-2010 Tobacco-verification Regulation of Atmosphere Condition for Laboratory
JJG 119-2018 Verification Regulation of Laboratory pH Meters

Professional Standard - Water Conservancy

SL 684-2014 Classification and rating standard for water environmental monitoring laboratory
SL 237-011-1999 Code for test of soil - compaction test

水利部

SL/T 684-2014 Classification and grading standards for water environment monitoring laboratories

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40326-2021 Energy efficiency grades for laboratory equipment—Drug stability test chambers

Chongqing Provincial Standard of the People's Republic of China

DB50/T 507-2013 Regulations for acceptance of hydrological construction projects in Chongqing

Zhejiang Provincial Standard of the People's Republic of China

DB33/T 893.3-2013 Clinical Laboratory Information System Part 3: Workflow Specification

Professional Standard - Petroleum

SY 6014-2010 Safety Regulations for Petroleum Geology Laboratory
SY/T 4032.2-1993(条文说明) Standard for Quality Inspection and Evaluation of Petroleum Construction Engineering.Telecommunication Engineering (Local Line Engineering)

国家能源局

SY/T 6014-2019 Safety regulations for petroleum geology laboratory

Professional Standard - Machinery

JBJ/T 33-1999 Design code for central laboratories of machinery plants
JBJ/T 33-1999（条文说明） Design code for central laboratories of machinery plants(explanation)
JB/T 7439.6-1994 Terminology relating to laboratory instruments - Laboratory centrifuge

未注明发布机构

DIN EN ISO 15195 E:2018-05 Competence requirements for calibration laboratories using reference measurement procedures in laboratory medicine (draft)
DIN EN 17542-1 E:2020-08 Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard

Professional Standard - Automobile

QC/T 925-2013 Ultracapacitor electric city bus. Engineering approval evaluation program

Professional Standard - Municipal Engineering Specification

GJJ 28-1989 Construction and acceptance specifications for urban heat supply pipework

Xinjiang Provincial Standard of the People's Republic of China

DB6501/T 041-2022 Construction and acceptance regulations of sponge city construction in Urumqi

Shandong Provincial Standard of the People's Republic of China

DB37/T 5134-2019 Sponge City Construction Engineering Construction and Acceptance Standards

Military Standard of the People's Republic of China-General Armament Department

GJB 2725-1996 General requirements for calibration laboratories and testing laboratories
GJB 2725A-2001 General requirements for testing laboratories and calibration laboratories

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1786-2018 Food production enterprise testing laboratory classification management rules

Professional Standard - Chemical Industry

HG/T 20711-2019 Design code for heating，ventilation and air conditioning of chemical laboratory and test cabinet

Shanxi Provincial Standard of the People's Republic of China

DB1409/T 44-2023 PCR laboratory medical waste disposal procedures

Hebei Provincial Standard of the People's Republic of China

DB13/T 2105-2014 Laboratory chemical analysis pipetting operating procedures
DB13/T 2104-2014 Laboratory chemical analysis titration operating procedures

中国石油天然气总公司

SY 4032.2-1993 Petroleum construction project quality inspection and assessment communication project (city telephone line project)

Professional Standard - Business

SB/T 10352-2003 Basic requirements for laboratory inspection of livestock and poultry slaughtering and processing plants

American Society of Civil Engineers (ASCE)

ASCE GSP 209-2011 GEOTECHNICAL CHARACTERIZATION, FIELD MEASUREMENT, AND LABORATORY TESTING OF MUNICIPAL SOLID WASTE

U.S. Air Force

AIR FORCE MIL-STD-810 G-2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
AIR FORCE MIL-STD-810 F CHG NOTICE 3-2003 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS

German Institute for Standardization

DIN 12915:1994-02 Laboratory furniture; sinks for laboratory benches
DIN 12912:1977 Laboratory furniture; ceramic tiles for laboratory bench tops
DIN 12918-3:2004-11 Laboratory equipment - Laboratory fittings - Part 3: Valves for technical gases
DIN 12918-3:2004 Laboratory equipment - Laboratory fittings - Part 3: Valves for technical gases
DIN 32649:1987 Graphical symbols for chemical proccesses in laboratories; basic processes
DIN 12916:1995 Laboratory furniture - Large size tiles for laboratory bench tops
DIN EN 17542-1:2022 Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard
DIN CEN/TS 17441:2020-07 Laboratory installations - Ventilation systems in laboratories; German version CEN/TS 17441:2020
DIN EN ISO 15195:2004 Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003); German version EN ISO 15195:2003
DIN EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
DIN EN 13150:2001 Workbenches for laboratories - Safety requirements and test methods; German version EN 13150:2001
DIN 12785:1977 Laboratory glassware; special purpose laboratory thermometers
DIN 12918-1:1999 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN EN ISO 10416:2010 Petroleum and natural gas industries - Drilling fluids - Laboratory testing (ISO 10416:2008); English version EN ISO 10416:2009
DIN EN 17542-2:2022-08 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard; German version EN 17542-2:2022
DIN EN 17542-1:2022-08 Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard; German version EN 17542-1:2022
DIN EN 17542-2:2022 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard

SCC

MIL MIL-STD-810H-2019 Environmental Engineering Considerations and Laboratory Tests
MIL MIL-W-42059-1988 WORK BOX, DENTAL LABORATORY
BS 308:1943 Engineering drawing office practice
BS 308:1953 Engineering drawing office practice
BS 308:1927 Engineering drawing office practice
ASTM Adjunct E691-01 Program to Compute the Within-Lab and Between-Lab Variation of a Test Method from an Interlaboratory Round Robin Study
NS 8005:1990 Geotechnical testing — Laboratory methods — Grain-size analysis of soil samples
DANSK DS/EN 17542-1:2022 Earthworks – Geotechnical laboratory tests – Part 1: Degradability test standard
DANSK DS/EN 17542-2:2022 Earthworks – Geotechnical laboratory tests – Part 2: Fragmentability test standard
NS-EN 17542-2:2022 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard
CEI EN 50499:2020 Procedure for assessing workers' exposure to electromagnetic fields
AWWA SRC57775 A Source Water Assessment of the Idaho National Engineering and Environmental Laboratory
DANSK DS/CEN/TS 17441:2020 Laboratory installations – Ventilation systems in laboratories
NS-EN 17542-1:2022 Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard
BS PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
SN-CEN/TS 17441:2020 Laboratory installations — Ventilation systems in laboratories
AS 2579.1:1983 Hard coal - Froth flotation testing - Laboratory procedure
NS 8001:1982 Geotechnical testing — Laboratory methods — Percussion liquid limit
AMCA 802-19 Industrial Process/Power Generation Fans: Establishing Performance Using Laboratory Models
BS ISO 13347-1:2004 Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. General overview
DANSK DS/ISO/TR 22869:2005 Medical laboratories – Guidance on laboratory implementation of ISO 15189:2003
NS 8003:1982 Geotechnical testing — Laboratory methods — Plastic limit
AATCC LP1-2021 Laboratory Procedure for Home Laundering: Machine Washing
BS DD CEN ISO/TS 17892-6:2004 Geotechnical investigation and testing. Laboratory testing of soils-Fall cone test
BS 4196-3:1981 Sound power levels of noise sources-Engineering methods for determination of sound power levels for sources in special reverberation test rooms
AWWA WQTC57026 Water Industry Laboratory Response to Contamination Threats
BS 4196-3:1991 Sound power levels of noise sources-Engineering methods for determination of sound power levels for sources in special reverberation test rooms
AWWA WQTC57095 Water Industry Laboratory Response to Contamination Threats
ISO 13347-2:2004 Draft Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 2: Reverberant room method
DANSK DS/ISO 13347-2:2004 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 2: Reverberant room method
AWWA WSC70018 Water Laboratory Alliance: A Focus on Laboratory Response
MIL MIL-STD-810G-2008 Department of Defense Test Method Standard - Environmental Engineering Considerations and Laboratory Tests
NS 8015:1988 Geotechnical testing - Laboratory methods - Determination of undrained shear strength by fall-cone testing
AMCA 220-21 Laboratory Methods of Testing Air Curtains for Aerodynamic Performance Ratings
AMCA 220-05 Laboratory Methods of Testing Air Curtains for Aerodynamic Performance Ratings
SN-CEN/TR 14742:2006 Characterization of sludges — Laboratory chemical conditioning procedure
BS 3202:1959 Recommendations on laboratory furniture & fittings
BS EN ISO 17892-12:2018+A1:2021 Geotechnical investigation and testing. Laboratory testing of soil-Determination of liquid and plastic limits
AWWA JAW23578 Journal AWWA — Advanced Oxidation Processes for Treating Groundwater Contaminated With TCE and PCE: Laboratory Studies
06/30150569 DC BS ISO 27327. Industrial fans. Laboratory methods of testing air curtain units for aerodynamic performance rating
AWWA ACE54512 Removal of MTBE From Potable Waters by Advanced Oxidation Processes: A Bench and Pilot Scale Evaluation
BS ISO 13347-3:2004 Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. Enveloping surface method
CSA C22.2 No.151-1979 Laboratory Equipment
VDI 4221 BLATT 2-2017 Quality assurance — Requirements for interlaboratory tests in the field of emission control — Development, implementation and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions
NS 8017:1991 Geotechnical testing - Laboratory methods - Determination of one-dimensional consolidation properties by oedometer testing - Method using incremental loading
CSA C22.2 No.151-M1986-1986(R2004) Laboratory Equipment
AS 2982:1987 Laboratory construction
AWWA WQTC60640 Laboratory Ethics
NS 8018:1993 Geotechnical testing - Laboratory methods - Determination of one-dimensional consolidation properties by oedometer testing - Method using continuous loading

NO-SN

NS 8002-1982 Geotechnical testing - Laboratory methods - Fall cone liquid limit
NS 8001-1982 Geotechnical testing - Laboratory methods - Percussion liquid limit
NS 8004-1982 Geotechnical testing - Laboratory methods - Shrinkage limit
NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles
NS 8005-1990 Geotechnical testing - Laboratory methods - Grain-size analysis of soil samples
NS 8014-1982 Geotechnical testing - Laboratory methods - Void ratio, porosity and degree of saturation
NS 8015-1988 Geotechnical testing - Laboratory methods - Determination of undrained shear strength by fall-cone testing
NS 8000-1982 Geotechnical testing - Laboratory methods - Consistency limits - Terms and symbols

US-FCR

FCR COE ER 10-1-26-1992 U. S. ARMY CONSTRUCTION ENGINEERING RESEARCH LABORATORIES
FCR COE EP 1-1-10-1985 CORPS OF ENGINEERS LABORATORY, INVESTIGATIONAL, RESEARCH AND TESTING FACILITIES
FCR COE ER 10-1-25-1987 U.S. ARMY COLD REGIONS RESEARCH AND ENGINEERING LABORATORY
FCR COE ER 1110-1-261-1999 QUALITY ASSURANCE OF LABORATORY TESTING PROCEDURES
FCR VA 11 53 23-2011 LABORATORY REFRIGERATORS

SE-SIS

SIS SS 02 71 09-1989 Geotechnical tests — Compaction properties — Laboratory compaction

Korean Agency for Technology and Standards (KATS)

KS D 0299-2019 Laboratory method for the preparation of rust grades
KS D 0299-2009 Laboratory method for the preparation of rust grades
KS F 1001-2020 Drawing office practice for civil engineering works
KS M 7036-1995 Laboratory processing of pulp(Beater method)
KS B 6864-2012 Earth－moving machinery－Laboratory evaluation of operator seat vibration
KS M 7036-2007 LABORATORY PROCESSING OF PULP (BEATER METHOD)
KS B ISO 13347-2:2005 Industrial fans－Determination of fan sound power levels under standardized laboratory conditions－Part 2：Reverberant room method
KS P ISO TR 22869-2019 Medical laboratories－Guidance on laboratory implementation of KS P ISO 15189：2006
KS P ISO TR 15599:2019 Digital codification of dental laboratory procedures
KS P ISO TR 22869-2009(2019) Medical laboratories－Guidance on laboratory implementation of KS P ISO 15189：2006
KS C IEC 60477-2013(2018) Laboratory resistors－Laboratory d.c. resistors
KS C IEC 60477-2023 Laboratory resistors－Laboratory d.c. resistors
KS P ISO 15195:2007 Laboratory medicine-Requirements for reference measurement laboratories
KS P 2068-2020 Protocol for interference testing in in-vitro diagnostic medical laboratory
KS P ISO 15195-2014(2019) Laboratory medicine — Requirements for reference measurement laboratories
KS B 6875-2004 Earth-moving machinery－Roll-over protective structures－Laboratory tests and performance requirements
KS P ISO 15195:2014 Laboratory medicine — Requirements for reference measurement laboratories
KS C IEC 60477:2013 Laboratory resistors－Laboratory d.c. resistors
KS B ISO 13347-2:2020 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions —Part 2: Reverberant room method
KS P ISO TR 15599:2013 Digital codification of dental laboratory procedures
KS C IEC 61229:2017 Rigid protective covers for live working on a.c. installations

HU-MSZT

MSZ 6551-1982 Laboratory steel work table
MSZ 6604-1951 Laboratory steel work table
MNOSZ 14712-1953 Laboratory enamel tools
MSZ 14734/6-1982 Laboratory ceramic tools
MSZ 18000/9-1971 Brown coal laboratory testing. Flammability rating
MSZ 5002-1962 Laboratory equipment measuring tools
MNOSZ 14711-1953 Enamel tools for laboratory use. measuring cup
MSZ 17500/4-1970 Refractories, industrial and laboratory inspection
MSZ 14734/3-1982 Laboratory ceramic tools. friction device
MNOSZ 6616-1952 G logo laboratory work table
MSZ 14734/4-1982 Laboratory ceramic tools. Friction disc
MNOSZ 14717-1953 Enamel tools for laboratory use. Component
MSZ 14720-1960 Enamel tools for laboratory use. scraper
MNOSZ 2148-1955 Laboratory glass weighing tools
MNOSZ 2147-1955 Laboratory glass tools iodine. flask
MNOSZ 14721-1953 Enamel tools for laboratory use. plate
MNOSZ 10430-1952 Laboratory glass tools. Element detection
MSZ 6603-1951 Laboratory steel structure double door work table
MNOSZ 14715-1953 Enamel tools for laboratory use. burning test tube
MNOSZ 14723-1954 Enamel tools for laboratory use. Ball grinder
MNOSZ 6611-1952 A logo double door double drawer laboratory work table
MSZ 5006-1962 Correct item identification in Experimental City

Defense Logistics Agency

DLA A-A-50060 C-2012 BALANCES, TRIP, LABORATORY
DLA A-A-53071-1987 OVEN, LABORATORY

American Society for Testing and Materials (ASTM)

ASTM C1077-11 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C1077-07 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-07a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-10d Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-11a Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C1077-11b Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C1077-11c Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM G31-12a Standard Practice for Laboratory Immersion Corrosion Testing of Metals
ASTM G31-72(1999) Standard Practice for Laboratory Immersion Corrosion Testing of Metals
ASTM D1684-07 Standard Practice for Lighting Cotton Classing Rooms for Color Grading
ASTM D1684-07(2012) Standard Practice for Lighting Cotton Classing Rooms for Color Grading
ASTM E2099-23 Standard Practice for Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
ASTM E2935-13 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D6512-07(2014) Standard Practice for Interlaboratory Quantitation Estimate
ASTM C1021-97 Standard Practice for Laboratories Engaged in the Testing of Building Sealants
ASTM C1222-05a Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1021-08 Standard Practice for Laboratories Engaged in Testing of Building Sealants
ASTM C1021-01 Standard Practice for Laboratories Engaged in the Testing of Building Sealants
ASTM C1222-05 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM D6512-07 Standard Practice for Interlaboratory Quantitation Estimate
ASTM D3856-95(2006) Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
ASTM C1077-06a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-10c Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM E1944-98(2007) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM C1077-05b Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-06 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077-05a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1222-13e1 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222-17 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM D5322-23 Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
ASTM D5361/D5361M-14 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM C1222-23 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM E1397-91(2003) Standard Practice for the in vitro Rat Hepatocyte DNA Repair Assay
ASTM D5361/D5361M-11 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM C1222-09 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM D5361/D5361M-16 Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
ASTM D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development
ASTM C1222-13 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM D5361/D5361M-16(2022) Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
ASTM D7783-21 Standard Practice for Within-laboratory Quantitation Estimation (WQE)
ASTM D5322-17 Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
ASTM E1119-07 Standard Specification for Industrial Grade Ethylene Glycol
ASTM D2168-10(2018) Standard Practices for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D969-85(2003)e1 Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D969-85(1998) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM E2935-14 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D96-73(1984) Laboratory test method for degree of bleeding of road marking paint
ASTM D96-88(1998) Laboratory test method for degree of bleeding of road marking paint
ASTM E2935-15 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM C1021-08(2019) Standard Practice for Laboratories Engaged in Testing of Building Sealants
ASTM D6512-03 Standard Practice for Interlaboratory Quantitation Estimate
ASTM D6512-00 Standard Practice for Interlaboratory Quantitation Estimate
ASTM E2653-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM C802-96 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM D3980-88 Standard Practice for Interlaboratory Testing of Paint and Related Materials
ASTM C802-14 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM D3980-87 Standard Practice for Interlaboratory Testing of Paint and Related Materials
ASTM C802-09 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C1222-03 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1077-05 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM G162-99(2010) Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
ASTM C802-09a Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96(2002) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96(2008)e1 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C1222-06 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM E542-22 Standard Practice for Gravimetric Calibration of Laboratory Volumetric Instruments
ASTM C1021-08(2014) Standard Practice for Laboratories Engaged in Testing of Building Sealants
ASTM E542-01(2021) Standard Practice for Calibration of Laboratory Volumetric Apparatus
ASTM C1077-05be1 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation

British Standards Institution (BSI)

DD ENV 1997-2-2000 Eurocode 7. Geotechnical design. Design assisted by laboratory testing
BS 5492:1990 Code of practice for internal plastering
BS ISO 13347-2:2004 Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. Reverberant room method
BS ISO 15560:1999 Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
BS ISO 15560:1998 Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
20/30419948 DC BS EN 17542-1. Earthworks. Geotechnical laboratory tests. Part 1. Degradability
BS EN 17542-1:2022 Earthworks. Geotechnical laboratory tests - Degradability test standard
BS EN 17542-2:2022 Earthworks. Geotechnical laboratory tests - Fragmentability test standard
BS EN ISO 17892-4:2016 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle size distribution
PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
BS EN ISO 17892-5:2017 Geotechnical investigation and testing. Laboratory testing of soil. Incremental loading oedometer test
BS EN IEC 60477-1:2022 Laboratory resistors. Laboratory DC resistors
BS EN 12741:1999 Biotechnology - Laboratories for research, development and analysis - Guidance for biotechnology laboratory operations
BS EN ISO 17892-1:2014 Geotechnical investigation and testing. Laboratory testing of soil. Determination of water content
BS EN ISO 7787-1:2016 Dentistry. Laboratory cutters. Steel laboratory cutters
PAS 820:2012 Laboratory-identifiable forensic codes. Classification of performance when exposed to artificial weathering
20/30419954 DC BS EN 17542-2. Earthworks. Geotechnical laboratory tests. Part 2. Fragmentability test standard
BS ISO 13347-1:2004+A1:2010 Industrial fans. Determination of fan sound power levels under standardized laboratory conditions.. General overview
BS ISO 13347-2:2004(2008)*BS 848-2.2:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2 : Reverberant room method
BS EN ISO 17892-10:2018 Geotechnical investigation and testing. Laboratory testing of soil - Direct shear tests
BS EN IEC 60477-2:2022 Laboratory resistors. Laboratory AC resistors
BS EN 60477-2:1999 Laboratory resistors - Laboratory a.c. resistors
BS EN ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories
BS EN 60477-2:1980 Laboratory resistors. Laboratory a.c. resistors
BS EN ISO 17892-3:2015 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle density
BS EN ISO 17892-6:2017 Geotechnical investigation and testing. Laboratory testing of soil. Fall cone test
BS EN ISO 17892-11:2019 Geotechnical investigation and testing. Laboratory testing of soil - Permeability tests
BS EN ISO 17892-2:2014 Geotechnical investigation and testing. Laboratory testing of soil. Determination of bulk density
BS ISO 13347-4:2004 Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. Sound intensity method
BS 7530-1:1992 Methods for froth flotation testing of hard coal - Laboratory procedure
BS EN 14742:2015 Characterization of sludges. Laboratory chemical conditioning procedure
BS ISO 8858-1:2019 Hard coal. Froth flotation testing - Laboratory procedure
BS ISO 13347-3:2004+A1:2010 Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. Enveloping surface methods
BS EN ISO 17892-1:2014+A1:2022 Geotechnical investigation and testing. Laboratory testing of soil - Determination of water content
BS EN ISO 17892-8:2018 Geotechnical investigation and testing. Laboratory testing of soil - Unconsolidated undrained triaxial test

RO-ASRO

STAS 5548-1966 Laboratory glass products. Faucet classification
STAS 8593-1988 RIVER BED REGULATION WORKS Ground studies and laboratory researches
STAS 10517-1976 Laboratory glassware SEPARATING FUNNELS

Military Standards (MIL-STD)

DOD MIL-W-42059-1988 WORK BOX, DENTAL LABORATORY
DOD A-A-51358-1986 TONGS, LABORATORY
DOD A-A-51680-1987 BURNER, GAS, LABORATORY

American National Standards Institute （ANSI)

AMCA 210-74 Laboratory Methods of Testing Fans for Ratings
ANSI/AMCA 500-L-2015 Laboratory Methods of Testing Louvers for Rating
AMCA 802-02(R2008) Industrial Process/Power Generation Fans: Establishing Performance Using Laboratory Models
ANSI/ASTM E2935:2013 Practice for Conducting Equivalence Testing in Laboratory Applications
ANSI/AMCA 301-1990 Methods for Calculating Fan Sound Ratings from Laboratory Test Data
ANSI/AMCA 250-2012 Laboratory Methods of Testing Jet Tunnel Fans for Rating
ANSI/AIHA/ASSE Z9.5-2012 Laboratory Ventilation
ANSI/ASTM E2653a:2009 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer than Six Participating Laboratories

GSO

GSO ISO 7056:2007 Plastics laboratory ware - Beakers
GSO ISO 10416:2009 Petroleum and natural gas industries - Drilling fluids - Laboratory testing
GSO ISO 13347-2:2013 Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 2: Reverberant room method
GSO ISO/TR 22869:2016 Medical laboratories -- Guidance on laboratory implementation of ISO 15189: 2003
OS GSO ISO/TR 22869:2016 Medical laboratories -- Guidance on laboratory implementation of ISO 15189: 2003
SY/T 6014-2010 Safety regulations for petroleum geology laboratories
OS GSO ISO 13347-2:2013 Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 2: Reverberant room method
GSO ISO 15195:2012 Laboratory medicine -- Requirements for reference measurement laboratories
GSO ISO/TR 15599:2021 Digital codification of dental laboratory procedures
BH GSO ISO/TR 15599:2022 Digital codification of dental laboratory procedures
GSO 2145:2011 Laboratory Filter Papers

BE-NBN

NBN-ISO 3743:1992 Acoustics. Determination of sound power levels of noise sources. Engineering methods for special reverberation test rooms

PT-IPQ

NP EN 12128-2000 Biotechnology. Laboratories for research,development and analysis Containment levels of microbiology laboratories,areas of risk,localities and physical safety requirements

RU-GOST R

GOST 31883-2012 Principles of Good Laboratory Practice (GLP). Quality assurance in the application of GLP principles
GOST 31880-2012 Principles of Good Laboratory Practice. Guidance for the conduct of laboratory inspections and study audits
GOST 31879-2012 Principles of Good Laboratory Practice (GLP). Guides for compliance monitoring procedures for GLP Principles
GOST 31884-2012 Principles of Good Laboratory Practice. Compliance of laboratory suppliers with GLP Principles
GOST R ISO 15195-2006 Laboratory medicine. Requirements for reference measurement laboratories

Construction department of Hebei province

DB13(J) 59-2006 Regulations for acceptance of construction quality of municipal bridge engineering
DB13(J) 55-2005 Regulations for acceptance of construction quality of municipal road engineering
DB13(J) 56-2005 Regulations for acceptance of construction quality of municipal water supply pipeline engineering
DB13(J) 57-2005 Regulations for acceptance of construction quality of municipal drainage pipes and channels
DB13(J) 54-2005 General regulations for construction quality acceptance of municipal infrastructure projects

NEMA - National Electrical Manufacturers Association

NEMA ABP 7-2015 Engineering Series Ratings: Is It Practical?

Association of German Mechanical Engineers

DVS-EWF 1178 Beiblatt 2-1997 DVS-EWF Course - Welding Inspector Level 1 to Level 4 - Technical Inspection Training Laboratory Facilities; Personnel Requirements

AT-ON

ONORM B 4422-1-1992 Geotechnical engineering (foundation engineering) — Analysis of soil specimen — Determination of water permeability — Laboratory tests
ONORM B 4414 Teil.1-1976 Earthwork and foundation engineering, analysis of soll specimen; bulk density (laboratory methods).
OENORM B 4401-2020 Geotechnics - Relationship between drilling methods, quality classes of soil samples and sample quantities for geotechnical laboratory investigations

CZ-CSN

CSN 01 8003-1985 Safety code for working in laboratories
CSN 01 8003-2002 Safety code for working in chemical laboratories

Association Francaise de Normalisation

NF S92-062*NF EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures
XP X15-300*XP CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
XP CEN/TS 17441:2020 Laboratory installations - Laboratory ventilation systems
NF ISO 13347-2:2004 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 2: reverberation room method
NF EN 17542-2:2022 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test
FD ISO/TR 15599:2002 Codification numérique des procédures au laboratoire dentaire
FD S91-017*FD ISO/TR 15599:2002 Digital codification of dental laboratory procedures
NF S92-062:2004 Laboratory medicine - Requirements for reference measurement laboratories.
NF E51-006-2*NF ISO 13347-2:2004 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 2 : reverberant room method
NF X42-206*NF EN 12128:1998 Laboratories for research, development and analysis. Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements.
NF M87-291*NF EN ISO 10416:2010 Petroleum and natural gas industries - Drilling fluids - Laboratory testing.

IT-UNI

UNI 7832-1978 Average efficiency air filter. Laboratory testing and grading
UNI 7833-1978 High efficiency and ultra high efficiency air filters. Laboratory testing and grading

DIN

DIN CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories

API - American Petroleum Institute

API PUBL 4694-1999 Laboratory Analysis of Petroleum Industry Wastewaters Arranging for Analysis and Understanding Laboratory Reports

GOSTR

GOST R ISO/TR 22869-2009 Medical laboratories. Quidance on laboratory implementation of ISO 15189:2003

European Committee for Standardization (CEN)

CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
EN ISO 17892-6:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test
EN 14742:2015 Characterization of sludges - Laboratory chemical conditioning procedure

International Organization for Standardization (ISO)

ISO 15195:2018 Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement procedures
ISO/TR 18336:2016 Guidelines for good XRF laboratory practice for the iron ore industry
ISO 13347-2:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method (First Edition)
ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories
ISO 17892-6:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test
ISO/TR 15599:2002 Digital codification of dental laboratory procedures
ISO/TR 22869:2005 Medical laboratories - Guidance on laboratory implementation of ISO 15189:2003
ISO 10416:2008 Petroleum and natural gas industries - Drilling fluids - Laboratory testing
ISO 17892-5:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE HVAC APPLICATIONS SI CH 14-2003 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 13-1999 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 14-2003 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 16-2015 LABORATORIES
ASHRAE HVAC APPLICATIONS SI CH 16-2011 LABORATORIES
ASHRAE HVAC APPLICATIONS SI CH 14-2007 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 14-2007 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 16-2011 LABORATORIES
ASHRAE HVAC APPLICATIONS SI CH 13-1999 Laboratories
ASHRAE HVAC APPLICATIONS SI CH 16-2015 LABORATORIES
ASHRAE DA-00-5-3-2000 Assessment of Interlaboratory Reproducibility in Fenestration Energy Ratings
ASHRAE GUIDELINE 2-2010 Engineering Analysis of Experimental Data

PL-PKN

PN B13035-1974 Laboratory glassware Separating funnels

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE APPLICATION IP CH 16-2011 LABORATORIES
ASHRAE APP IP CH 14-2007 Laboratories
ASHRAE OR-05-16-2-2005 Altered Bi-Phase Flow Regime in Supermarket Evaporative Coils: Laboratory and Field Experiences
ASHRAE IC 51-1999-02-1999 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating

PH-BPS

PNS ISO 17892-6:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test
PNS ISO 17892-11:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests
PNS ISO 17892-10:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests
PNS ISO 17892-7:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test
PNS ISO 17892-1:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content

Society of Automotive Engineers (SAE)

SAE AS7109/5A-2005 (R) Nadcap Requirements for Coating Evaluation Laboratory Practices
SAE J1561-2001 Laboratory Speed Test Procedure for Passenger Car Tires
SAE J921A-1967 INSTRUMENT PANEL LABORATORY IMPACT TEST PROCEDURE—HEAD AREA
SAE J1633-2000 Laboratory Speed Test Procedure for Light Truck Tires
SAE J1633-2019 Laboratory Speed Test Procedure for Light Truck Tires

National Fire Protection Association (NFPA)

NFPA 99H CHAPTER 11-2002 Laboratories

SAE - SAE International

SAE J1561-1988 Laboratory Speed Test Procedure for Passenger Car Tires
SAE J1561-2019 Laboratory Speed Test Procedure for Passenger Car Tires
SAE J1561-1993 Laboratory Speed Test Procedure for Passenger Car Tires@ Recommended Practice (February 1993)
SAE J921-1965 INSTRUMENT PANEL LABORATORY IMPACT TEST PROCEDURES

Danish Standards Foundation

DS/ISO 13347-2:2005 Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 2: Reverberant room method

CEN - European Committee for Standardization

EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures

KR-KS

KS C IEC 60477-2013(2023) Laboratory resistors－Laboratory d.c. resistors
KS P ISO TR 15599-2019 Digital codification of dental laboratory procedures
KS F 2425-2022 Standard practice for preparing concrete sample in the laboratory
KS B ISO 13347-2-2020 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions —Part 2: Reverberant room method
KS C IEC 61229-2017 Rigid protective covers for live working on a.c. installations

TH-TISI

TIS 2277-2006 Laboratory medicine.requirements for reference measurement laboratories

CU-NC

NC 26-212-1992 GOOD LABORATOY PRACTICES

AENOR

UNE-ISO/TR 22869:2007 IN Medical laboratories. Guidance on laboratory implementation of ISO 15189: 2003. (ISO/TR 22869:2005)

US-HHS

HHS 21 CFR PART 58-2011 GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES

ES-UNE

UNE-EN 17542-2:2023 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard.
UNE-EN 17542-1:2023 Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard.

US-CLSI

CLSI H18-A4-2010 Procedures for the Handling and Processing of Blood Specimens for Common Laboratory Tests

CN-STDBOOK

图书 A-5052 Guidelines for the Construction and Operation Management of Biosafety Level 2 Laboratories

VDI - Verein Deutscher Ingenieure

VDI 2051-1978 Ventilation of laboratories

Others: Agricultural Engineering Laboratory,Chemical Laboratory Engineering,Municipal laboratory configuration,laboratory engineering,Municipal National Laboratory,engineering laboratory,engineering laboratory,laboratory in bioengineering,Bioengineering related laboratories,laboratory engineering,c1 engineering laboratory,p3 Engineering Lab,Municipal Engineering Laboratory,Geotechnical Laboratory,Central Laboratory Engineering,National Engineering Laboratory