Self-acceptance platform

Self-acceptance platform, Total:166 items.

The international standard classification for "Self-acceptance platform" includes: Construction technology , Other standards related to shipbuilding and marine structures , Flat steel products and semi-products , General standards related to shipbuilding and marine structures , Exploratory and extraction equipment , Diagnostic, maintenance and test equipment , Characteristics and design of machines, apparatus, equipment , Deck equipment and installations , Marine engines and propulsion systems , Geology. Meteorology. Hydrology .

The Chinese standard classification for "Self-acceptance platform" includes: Building construction and decoration engineering , Ocean platforms , Steel sheet and strip , Vessel technology , Petroleum drilling & production equipment and instrument , Highway vehicle servicing installation , Hygiene, safety and labor protection , Engine room equipment , Special devices for ocean platform , Mechanics Measurement , Oceanographic instrumentation .

Group Standards of the People's Republic of China

T/CHEC 007-2021 Automatic sliding door installation acceptance specification
T/CASME 1060-2023 Water quality automatic monitoring and management platform
T/QGCML 3272-2024 Self-propelled straight arm aerial work platform
T/CAMET 01009-2023 Specifications for construction and acceptance of subway evacuation platform projects
T/FJFA 003-2022 Specification for construction and acceptance of epoxy colored sand self-leveling floor
T/ZAITS 10503-2022 Technical requirements of interface between driving automation algorithm platform and simulation testing platform for driving automation
T/CAUI 014-2024 Integrated Circuit Experimental Teaching Platform
T/NJ 1272-2021 Garden equipment — Electric self-propelled up-down platform
T/FJFA 014-2022 Specification for construction and acceptance of cement-based self-leveling floor
T/FNBDIA 2-2023 Technical specifications for self-service platform for cross-provincial government affairs
T/CAUI 003-2023 Acceptance specification for virtual simulation experimental teaching platform
T/NJ 1141-2023 Picking table of self-propelled seed melon harvester
T/ZEA 006-2021 Guidelines for the Application of GBT 19001-2016 on Self-operated E-commerce Platforms
T/CIMA 0046-2023 Technical requirements for automatic water quality monitoring platform
T/CSNAME 008-2020 Self-elevating units (vessel) dynamic positioning system
T/CASME 1412-2024 Technical specification for multi-degrees of freedom simulation motion platform
T/CAAMM 26-2018 Self-propelled orchard work platform
T/FJFA 002-2022 Solvent-free epoxy self-leveling floor construction and acceptance specification
T/NJWX 002-2017 Hospital interface of medical self-service platform
T/QGCML 3271-2024 Self-propelled off-road scissor type aerial work platform
T/NJ 1261-2021 Dead livestock and poultry collection platform
T/QGCML 3269-2024 Self-propelled scissor-type aerial work platform
T/QGCML 3270-2024 Technical requirements for self-propelled mast-type aerial work platforms
T/CSNAME 009-2020 Jacking system for self-elevating unit
T/CHEC 003-2022 Technical Specifications for Installation and Acceptance of Medical Automatic Sliding Doors
T/GDEIIA 50-2024 Technical Specifications of the Bay Area Government Self-Service Platform

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 2527-2019 Specifications for the construction of information platforms for nature reserves
DB23/T 3209-2022 Government Service Platform Project Acceptance Specifications

Professional Standard - Post and Telecommunication

YD/T 5171-2009 Provisional Acceptance Specification for Individuation Ring Back Tone Platform

未注明发布机构

DNV-OS-C104-2022 LRFD method for jack-up platform structure design
DNV-RP-C104-2022 Recommended practice — DNV-RP-C104

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 36727-2018 Stage machinery—Specification for acceptance test
GB/T 37451-2019 Test procedures for offshore cranes
GB/T 32079-2015 Leg fixation system for jack-up
GB/T 37457-2019 Spudcan penetration technology of self-elevating drilling unit
GB/T 28529-2012 Platform brake tester
GB/T 39187-2020 Jack up conductor/blow out preventer tension compensation system
GB/T 37353-2019 Design guidelines for drill floor structure of self-elevating drilling units
GB/T 37347-2019 Structure details for self-elevating drilling units
GB/T 37381-2019 Design guidelines for main hull structure of self-elevating drilling units
GB/T 36579-2018 Load test method of cantilever system for self-elevating drilling unit
GB/T 37351-2019 Design guidelines for spudcan structure of self-elevating drilling units
GB/T 29549.3-2013 Specifications for offshore modular drilling rigs on fixed platforms—Part 3:Hook-up,commissioning and acceptance
GB/T 31945-2015 Steel plate for self-elevating drilling units leg structure
GB/T 36673-2018 Design requirements of drill floor skidding system for self-elevating drilling uint
GB/T 37349-2019 Design guidelines for cantilever structure of self-elevating drilling units
GB/T 37459-2019 Jack-up jacking system installation requirement
GB/T 37348-2019 Design guidelines for deck loading plan of self-elevating drilling units
GB/T 37339-2019 Design guidelines for leg structure of self-elevating drilling units
GB/T 37331-2019 Design guidelines for structure material of self-elevating drilling units
GB/T 37747-2019 Requirements of construction for self-elevating drilling units
GB/T 37159.2-2019 Petroleum drilling and production equipment-Offshore self-elevating drilling unit-Part 2:Construction installation and commissioning acceptance

Shandong Provincial Standard of the People's Republic of China

DB37/T 4420-2021 Code for installation and acceptance of shallow sea modular geological drilling platform

Guangdong Provincial Standard of the People's Republic of China

DB4401/T 229-2023 City Information Model (CIM) Platform Completion Acceptance Model Delivery Specification

Professional Standard - Aviation

HB 2083-1974 Inspection platform (L=200~800mm)
HB 2083-1989 Inspection platform (L=200~800mm)

Hunan Provincial Standard of the People's Republic of China

DB43/T 1807-2020 Specification for acceptance of installation of vertical lift platforms for persons with reduced mobility

National Metrological Verification Regulations of the People's Republic of China

JJG 1020-2017 Platform Brake Testers
JJG 1000-2005 Verification Regulation for Electrodynamic Horizontal Vibration Generator for Testing

Professional Standard-Ships

CB/Z 808-2016 Offshore Platform Model Test Regulations
CB/T 4513-2020 The design specification and fixing of hydraulic rack and pinionjacking system for self-elevating units
CB/T 4403-2014 Requirements for self-elevating unit's truss legs fabrication

Professional Standard - Aerospace

QJ 2164-1991 Automated testing method for hydrostatic floating gyro platform

Professional Standard - Energy

DL/T 2769-2024 Technical Specification for Distribution Automation Terminal Testing Platform

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 1510-2015 Lifting work platform inspection rules

Professional Standard - Petroleum

SY/T 10025-1999 drilling Rig Pre-Drilling Inspection Specification

Professional Standard - Ocean

HY/T 135-2010 Seabed based environmental monitoring platform

Professional Standard - Culture

WH/T 27-2007 Mechanical Equipment on Stages-Acceptance Test Procedures

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1532-2022 Inspection specification for fixed platform truck

Hebei Provincial Standard of the People's Republic of China

DB/1300 J94 1-1990 Commissioning acceptance specification for in-use fuel injection pump test bench

IT-UNI

UNI 7973-1979 Lathe acceptance regulations. Surface milling machine with fixed table
UNI 5363-1964 Lathe acceptance regulations. Surface grinder with vertical grinding spindle and table
UNI 5360-1979 Test conditions for machine tools. Surface grinding machines with horizontal spindle and reciprocating table, with transverse movement of the table.
UNI 5069-1962 Lathe acceptance regulations. Mechanical turntables and optical turntables

PL-PKN

PN F53003-1990 Non-automatic platform scales Scale platforms Basic dimensions

Ente Nazionale Italiano di Unificazione

UNI EN 1495:1999 Lifting platforms - Mast climbing work platforms
UNI EN 1495:2005 Lifting platforms - Mast climbing work platforms
UNI ISO 3442-2:2009 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and groove type jaws
UNI ISO 3442-1:2009 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and groove type jaws
UNI 8594:2004 Tables and desks - Deflection of tables tops

American National Standards Institute （ANSI)

ANSI/CAN/UL 3100:2023 Automated Mobile Platforms (AMPs)
ANSI/CAN/UL 3100:2024 Automated Mobile Platforms (AMPs)
ANSI/SIA A92.6-2006 Self-Propelled Elevating Work Platforms
ANSI/SAIA A92.6-2006(R2014) American National Standard for Self-Propelled Elevating Work Platforms

Canadian Standards Association (CSA)

CSA ANSI/CAN/UL 3100-2021 Automated Mobile Platforms (AMPs)
CAN/CSA-B354.2-2001(R2013) Self-Propelled Elevating Work Platforms
CAN/CSA B354.2-2001(R2013) Self-Propelled Elevating Work Platforms
CAN/CSA-B354.2-2001(C2013) Self-propelled elevating work platforms
CSA B354.2-2001(R2013) Self-Propelled Elevating Work Platforms — originally published March 2001
CAN/CSA B354.4-2002(R2013) Self-Propelled Boom-Supported Elevating Work Platforms
CSA B354.4-2002(R2013) Self-propelled boom support aerial work platform
CAN/CSA-B354.4-2002(R2013) Self-Propelled Boom-Supported Elevating Work Platforms
CAN/CSA-B354.4-2002(C2013) Self-propelled elevating work platforms with articulated arm
CAN/CSA-ISO 8082-2:2016 Self-propelled machinery for forestry — Laboratory tests and performance requirements for roll-over protective structures — Part 2: Machines having a rotating platform with a cab and boom on the platform

IN-BIS

IS 10311-1982 General requirements and acceptance criteria for power platform vehicles

SCC

SPC GB/T 37159.2-2019 Petroleum drilling and production equipment -- Offshore self-elevating drilling unit -- Part 2:Construction installation and commissioning acceptance (TEXT OF DOCUMENT IS IN CHINESE)
SAIA A92.6-2006(R2014) Self-Propelled Elevating Work Platforms
CAN 3-B354.2-M82-1982 Self-propelled elevating work platforms for use on asphalt or slab surfaces
SPC GB/T 37353-2019 Design guidelines for drill floor structure of self-elevating drilling units (TEXT OF DOCUMENT IS IN CHINESE)

German Institute for Standardization

DIN 8632-1:1989 Machine tools; surface grinding machines with horizontal grinding wheel spindle and rectangular reciprocating table; acceptance conditions
DIN 8611-1:1976-01 Machine Tools; Horizontal Single-spindle Automatic Lathes; Acceptance Conditions
DIN 8611-3:1976-01 Machine Tools; Horizontal Automatic Lathes; Swiss-Type Automatic Lathes; Acceptance Conditions
DIN 8611-2:1976-01 Machine Tools; Horizontal Automatic Lathes; Front-loaded; Acceptance Conditions
DIN 8615-3:1979-11 Machine Tools; Milling Machines with Horizontal Spindle and Fixed Table; Acceptance Conditions
DIN 8620-3:1980-07 Machine Tools; Boring and Millung Machines with Horizontal Spindle; Table-Type Machines; Rotary Tables; Acceptance Conditions
DIN 8632-3:1976-04 Machine Tools; Surface Grinding Machines with Horizontal Grinding Wheel Spindle, with Round Table; Acceptance Conditions
DIN 8633-3:1977 Machine Tools; Surface Grinding Machines with Vertical Grinding Wheel Spindle and Round Table; Acceptance Conditions
DIN 8119-4:2007 Platform scales - Part 4: Design loads for floor-mounted and dormant scales
DIN 8620-3:1980 Machine Tools; Boring and Millung Machines with Horizontal Spindle; Table-Type Machines; Rotary Tables; Acceptance Conditions
DIN EN 1495:2009-12 Lifting platforms - Mast climbing work platforms; German version EN 1495:1997+A2:2009 / Note: DIN EN 1495 (1998-01) and DIN EN 1495/A1 (2004-02) remain valid alongside this standard until 2009-12-28.
DIN 8620-5:1985-02 Acceptance conditions for work-holding fixed tables in conjunction with machine tools with horizontal spindle designed for both boring and milling operations, Part 5

U.S. Air Force

AIR FORCE A-A-59324 A-2004 MAINTENANCE PLATFORM, SELF-PROPELLED, ELECTRIC
AIR FORCE A-A-59324 A VALID NOTICE 1-2009 Maintenance Platform, Self-Propelled, Electric
AIR FORCE MIL-M-87973-1985 MAINTENANCE PLATFORM SELF-PROPELLED, BOOM, LIFT, 40, 60, AND 80 FOOT
AIR FORCE MIL-M-87973 NOTICE 1-1995 MAINTENANCE PLATFORM SELF-PROPELLED, BOOM, LIFT, 40, 60, AND 80 FOOT

CZ-CSN

CSN 84 6410-1957 Plane test bench
CSN ON 07 2220-1965 Platforms and Channel Platforms

American Bureau of Shipping

ABS 167 NOTICE 1-2011 GUIDE FOR THE ENVIRONMENTAL PROTECTION NOTATION FOR OFFSHORE UNITS, FLOATING INSTALLATIONS, AND LIFTBOATS

National Association of Corrosion Engineers (NACE)

NACE No.7-1998(2000) Specification for construction and acceptance of anti-corrosion coatings for offshore oil platforms

British Standards Institution (BSI)

BS ISO 1986-1:2001 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Machines with a table length of up to 1600mm
BS ISO 1986-1:2014 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table. Testing of the accuracy. Machines with table length of up to 1 600 mm
BS ISO 8082-2:2011 Self-propelled machinery for forestry. Laboratory tests and performance requirements for roll-over protective structures. Machines having a rotating platform with a cab and boom on the platform
BS EN 1495+A2:1998 Lifting platforms. Mast climbing work platforms
BS EN 1495:1998 Lifting platforms - Mast climbing work platforms
BS EN 1495:1997+A2:2009 Lifting platforms - Mast climbing work platforms

International Organization for Standardization (ISO)

ISO 1986:1985 Acceptance conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table; Testing of accuracy
ISO 1985:1985 Acceptance conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table; Testing of accuracy
ISO 7008:1983 Woodworking machines; Single blade circular saw benches with or without travelling table; Nomenclature and acceptance conditions
ISO 8082-2:2011 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - Part 2: Machines having a rotating platform with a cab and boom on the platform

Underwriters Laboratories (UL)

UL 3100-2021 Standard for Safety for Automated Mobile Platforms (AMPs)

Korean Agency for Technology and Standards (KATS)

KS B 4039-2005 Acceptance conditions for surface grinding machines with horizontal grindingwheel spindle and reciprocating table－Testing of accuracy
KS B 4039-1986 Acceptance conditions for surface grinding machines with horizontal grindingwheel spindle and reciprocating table－Testing of accuracy
KS B 4039-2002 Acceptance conditions for surface grinding machines with horizontal grindingwheel spindle and reciprocating table－Testing of accuracy
KS T ISO 1496-5-2003(2023) Platform and platform base container

Swedish Institute for Standards

SS-ISO 1985:1998 Acceptance conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy
SS-EN 1495+A2:2009 Lifting platforms - Mast climbing work platforms
SS-ISO 8082-2:2011 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - Part 2: Machines having a rotating platform with a cab and boom on the platform (ISO 8082-2:2011, IDT)

GB-REG

REG NASA-LLIS-0155-1992 Lessons Learned - OPF Platform 13
REG NASA-LLIS-0394-1995 Lessons Learned - Voyager Scan Platform Problems

American Society for Testing and Materials (ASTM)

ASTM F985-18 Standard Specification for Pilot Platform

Electronic Components, Assemblies and Materials Association

ECA 498BAAA-1988 Detail Specification for Capability Approval of Metal Dome Contact Touch Stroke Switch Panels

South African Bureau of Standard

SANS 10314-2:2006 Vertical lift elevating work platforms - Operation and maintenance Part 2: Mobile self-propelled elevating aerial platforms

Indonesia Standards

SNI 10-6028-1999 Panama canal pilot platform

PT-IPQ

NP EN 1495-2000 Lifting platforms Mast climbing work platforms

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 8082-2:2016 Self-propelled machinery for forestry -- Laboratory tests and performance requirements for roll-over protective structures -- Part 2: Machines having a rotating platform with a cab and boom on the platform
OS GSO EN 1495:2011 Lifting platforms - Mast climbing work platforms

AT-ON

ONORM M 9115-1-2001 Machine tools - Acceptance conditions for single column milling machines with knee of variable height, with horizontal spindle

Lithuanian Standards Office

LST EN 1495+AC-2000+A2-2010 Lifting platforms - Mast climbing work platforms
LST EN 1495+AC-2000+A2-2010/AC-2010 Lifting platforms - Mast climbing work platforms

GCC Standardization Organization

GSO ISO 8082-2:2016 Self-propelled machinery for forestry -- Laboratory tests and performance requirements for roll-over protective structures -- Part 2: Machines having a rotating platform with a cab and boom on the platform

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 8082-2:2017 Self-propelled machinery for forestry -- Laboratory tests and performance requirements for roll-over protective structures -- Part 2: Machines having a rotating platform with a cab and boom on the platform

Gosstandart of Russia

GOST ISO 8082-2-2014 Self-propelled machinery for forestry. Laboratory tests and performance requirements for roll-over protective structures. Part 2. Machines having a rotating platform with a cab and boom on the platform
GOST EN 1495-2024 Lifting platforms. Lifting platforms for workers, mast

Spanish Association for Standardization (UNE)

UNE-EN 1495:1998 LIFTING PLATFORMS. MAST CLIMBING WORK PLATFORMS.
AENOR UNE-EN 1495+A2:2010 Lifting platforms - Mast climbing work platforms
AENOR UNE-EN 1495+A2 ERTA:2010 Lifting platforms - Mast climbing work platforms
UNE-EN 1495:1998+A2:2010 Lifting platforms - Mast climbing work platforms
UNE-EN 1495:1998+A2:2010 ERRATUM:2010 Lifting platforms - Mast climbing work platforms

Danish Standards Foundation

DS/EN 1495+A2/AC:2010 Lifting platforms - Mast climbing work platforms
DS/EN 1495+A2:2009 Lifting platforms - Mast climbing work platforms

International Telecommunication Union (ITU)

ITU-T F.749.6-2023 Requirements of vehicle information for automated driving in vehicle gateway platforms

Canadian General Standards Board （CGSB)

CAN3 B354.3-M82-1982 Self-Propelled Elevating Work Platforms for Use as ""Off-Slab"" Units

Standards Norway

NS-EN 1495:1997 Lifting platforms - Mast climbing work platforms
NS-EN 1495:1997+A2:2009 Lifting platforms - Mast climbing work platforms

Association Francaise de Normalisation

NF U34-251-2*NF ISO 8082-2:2012 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - Part 2 : machines having a rotating platform with a cab and boom on the platform
NF E52-611/IN2*NF EN 1495/IN2:2009 Lifting platforms - Mast climbing work platforms

Others: Self-acceptance platform,Inspection platform acceptance,Platform acceptance,Acceptance platform,Self-inspection platform,Acceptance platform,All acceptance platforms,Self-acceptance platform,Environmental acceptance platform