Transmission double spray

Transmission double spray, Total:278 items.

The international standard classification for "Transmission double spray" includes: Photographic paper, films and cartridges , Plant care equipment , Motion picture equipment , Vacuum technology , Glass in building , Deck equipment and installations , Internal combustion engines , Glass , Braking systems , Anaesthetic, respiratory and reanimation equipment , Protection against crime .

The Chinese standard classification for "Transmission double spray" includes: Basic standards and general methods for photosensitive material , Farming machinery and tools , Projection equipment and its accessory , Vacuum technique and equipment , Ceramic and glass in general , Compartment auxiliary machine , Fuel oil heating system , Internal combustion engine and auxiliary equipment , Electronic and electrical equipment , Surgery devices , Medical ultrasound, laser, high-frequency instrument and equipment , Police-used device and tool .

Taiwan Provincial Standard of the People's Republic of China

CNS 12663-1990 Method of Test for Radiographic and Classification of Radiographs for Titanium Welds
CNS 11604-1986 Method of Test for Clear Lacquer
CNS 4913-1986 Clear Lacquer
CNS 12672-1990 Method of Test for Radiographic and Classification of Radiographs of Aluminum
CNS 12671-1990 Method of Test for Radiographic and Classification of Radiographs for Stainless Steel Welds

Professional Standard - Chemical Industry

HG/T 2483-2006 Technical conditions of the prism - Base reflective - Transmitted double - Color liquid level meters
HG/T 4128-2010 Clear film for inkjet printing
HG/T 2483-1993 Technical conditions of prism transflective two-color liquid level gauge

Professional Standard - Machinery

JB/T 12587-2016 Rear projection transmitting solid screens
JB/T 5380-1999 The transmitting projection screens
JB/T 12212-2015 Two components airless spraying unit
JB/ZQ 4566-2006 Injection valves (10 MPa)
JB/T 10462-2004 Water ejector vacuum pump
JB/T 9781-1999 Engine-dirven sprayer - Spray parts
JB/T 9781-2011 Sprayer — Spray parts
JB/T 9797-1999 Sprayer. Spry parts

Professional Standard - Agriculture

ZB B 91005-1987 Nebulizer Spray Parts
ZB B 91016-1989 Sprayer Plastic Spray Parts

Professional Standard - Farm Machinery

NJ 129-1975 Manual Sprayer Spray Parts
NJ 193-1980 Hand Sprayer Plastic Spray Parts

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 21483-2008 Marine water jet pump
GB/T 13982-2011 The reflective and transmitting projection screens
GB/T 10826.1-2007 Fuel injection equipment—Vocabulary—Part 1：Fuel injection pump
GB/T 10826.5-2008 Fuel injection equipment—Vocabulary—Part 5:Common rail fuel injection system
GB/T 2680-1994 Determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors
GB/T 13982-2022 Reflective and transmitting projection screens
GB/T 13982-2011/XG1-2015 Reflective and transmissive projection screens
GB/T 13982-2005 The reflective and transmitting projection screens
GB/T 13982-2011(XG1-2015) Reflective and transmissive projection screens

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 2680-2021 Glass in building—Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors

Professional Standard-Ships

CB/T 297-2001 Exhaustor of spurt type
CB/T 297-1964 Exhaustor of spurt type

Professional Standard - Automobile

QC/T 967-2014 Port fuel injector for gasoline engine

National Metrological Verification Regulations of the People's Republic of China

JJG 976-2024 Opacimeters

国家药监局

YY 0042-2018 High-frequency jet ventilator

Professional Standard - Medicine

YY 0042-1991 Medical suture needle
YY 0042-2007 high-frequency jet ventilator

Gansu Provincial Standard of the People's Republic of China

DB62/T 2773-2017 Specifications for spraying pesticides by jet motorized sprayers

Professional Standard - Public Safety Standards

GA 575-2005 Jetbout with lachrymatory for police

AT-ON

ONORM EN 379-1994 Specification for welding filters with switchable luminous transmittance and welding filters with dual luminous transmittance
ONORM L 1066-1988 Physical investigations of soils; determination of the injiltration rate with a double ring infiltrometer

European Committee for Standardization (CEN)

EN ISO 13468-2:2021 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:2021)
EN 463:1994 Protective Clothing - Protection Against Liquid Chemicals - Test Method: Determination of Resistance to Penetration by a Jet of Liquid (Jet Test)
EN ISO 13468-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument
EN ISO 17491-3:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008)
EN ISO 17491-4:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008)
EN ISO 9073-17:2008 Textiles - Test methods for nonwovens - Part 17: Determination of water penetration (spray impact)
prEN 410-1990 Glass in building; determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing characteristics
EN 50348:2001 Automatic Electrostatic Spraying Equipment for Non-Flammable Liquid Spraying Material
CEN/TR 14920:2005 Jetting resistance of drain and sewer pipes - Moving jet test method
PD CEN/TR 14920:2005 Jetting resistance of drain and sewer pipes - Moving jet test method

United States Navy

NAVY MIL-R-85323-1980 RACK, BOMB, MULTIPLE EJECTOR, A/A37B-6 SERIES AND TRIPLE EJECTOR, A/A37B-5 SERIES
NAVY MIL-R-85323 (1)-1980 RACK, BOMB, MULTIPLE EJECTOR, A/A37B-6 SERIES AND TRIPLE EJECTOR, A/A37B-5 SERIES
NAVY MIL-B-18907 A-1988 BANDS, PROJECTILE ROTATING
NAVY A-A-59780-2005 PLURAL COMPONENT SPRAY EQUIPMENT FOR PAINT APPLICATION
NAVY MIL-E-19529 (1)-1965 EJECTOR, AERO 23A
NAVY MIL-E-19529-1956 EJECTOR, AERO 23A
NAVY QPL-15465-QPD-2012 EJECTOR ASSEMBLIES, AIR
NAVY QPL-15465-2012 EJECTOR ASSEMBLIES, AIR
NAVY QPL-15465-26 NOTICE 1-2008 Ejector Assemblies, Air
NAVY QPL-15465-26-2000 EJECTOR ASSEMBLIES, AIR

Association Francaise de Normalisation

NF T51-065-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2 : double-beam instrument.
NF T51-065-2*NF EN ISO 13468-2:2021 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2 : double-beam instrument
NF S77-113:1994 Specification for welding filters with switchable luminous transmittance and welding filters with dual luminous transmittance.
NF S74-516-3*NF EN ISO 17491-3:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3 : determination of resistance to penetration by a jet of liquid (Jet Test).
NF S74-511:1994 Protective clothing. Protection against liquid chemicals. Test method : determination of resistance to penetration by a jet of liquid (jet test).
NF EN ISO 17491-3:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: determination of resistance to penetration by a liquid jet (jet test)
NF G07-171-17*NF EN ISO 9073-17:2008 Textiles - Test methods for nonwovens - Part 17 : determination of water penetration (spray impact)
NF ISO 7876-1:2000 Fuel injection equipment - Vocabulary - Part 1: fuel injection pumps
NF ISO 7876-1/A1:2001 Fuel injection equipment - Vocabulary - Part 1: fuel injection pumps
NF ISO 7876-2/A1:2000 Fuel Injection Equipment - Vocabulary - Complete Fuel Injector Holders
NF ISO 7876-2:1992 Fuel Injection Equipment - Vocabulary - Complete Fuel Injector Holders
FD P16-107*FD CEN/TR 14920:2006 Jetting resistance of drain and sewer pipes - Moving jet test method
NF P18-511-2*NF EN 14488-2:2006 Testing sprayed concrete - Part 2 : compressive strength of young sprayed concrete

British Standards Institution (BSI)

BS EN ISO 13468-2:1999 Plastics - Determination of the total luminous transmittance of transparent materials - Double-beam instrument
BS EN ISO 13468-2:2021 Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument
BS EN 463:1995(1999) Protective clothing — Protection against liquid chemicals — Test method : Determination of resistance to penetration by a jet of liquid (Jet test)
BS EN ISO 17491-3:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test)
BS ISO 7876-5:2021 Fuel injection equipment. Vocabulary. Common rail fuel injection system
BS ISO 7876-5:2005 Fuel injection equipment - Vocabulary - Common rail fuel injection systems
BS EN 14488-2:2006 Testing sprayed concrete - Compressive strength of young sprayed concrete
BS EN 50348:2002 Automatic electrostatic spraying equipment for non-flammable liquid spraying material
BS PD CEN/TR 14920:2005 Jetting resistance of drain and sewer pipes-Moving jet test method
BS EN 14487-2:2006 Sprayed concrete - Execution
BS ISO 19724:2016 Gasoline engines with direct injection. Cleanliness assessment of fuel injection equipment
BS EN ISO 13468-1:1997 Plastics. Determination of the total luminous transmittance of transparent materials. Single-beam instrument

Korean Agency for Technology and Standards (KATS)

KS M ISO 13468-2:2007 Plastics－Determination of the total luminous transmittance of transparent materials－Part 2：Double-beam instrument
KS K ISO 17491-3:2017 Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid(jet test)
KS K ISO 17491-3:2011 Protective clothing－Test methods for clothing providing protection against chemicals－Part 3：Determination of resistance to penetration by a jet of liquid(jet test)
KS B 6017-1998(2018) Testing methods for steam jet air ejectors
KS R ISO 7876-1-2019 Fuel injection equipment — Vocabulary — Part 1: Fuel injection pumps
KS F 2782-2007 Set accelerating agent for shotcrete
KS R ISO 7876-2-2019 Fuel injection equipment — Vocabulary — Part 2: Fuel injectors
KS R ISO 7876-1-2014(2019) Fuel injection equipment — Vocabulary — Part 1: Fuel injection pumps
KS R ISO 7876-2-2014(2019) Fuel injection equipment — Vocabulary — Part 2: Fuel injectors
KS R 1110-2009 ROAD VEHICLES-DIESEL FUEL INJECTION PUMP TESTING - LALIBRATING INJECTOR
KS R ISO 14681:2007 Diesel engines－Fuel injection pump testing－Calibrating fuel injectors
KS R ISO 7876-1:2004 Fuel injection equipment-Vocabulary-Part 1:Fuel injection pumps
KS R ISO 7876-1:2014 Fuel injection equipment — Vocabulary — Part 1: Fuel injection pumps
KS R ISO 14681-2007(2017) Diesel engines－Fuel injection pump testing－Calibrating fuel injectors
KS R ISO 7876-3:2004 Fuel injection equipment－Vocabulary－Part 3：Unit injectors
KS C 7515-2003 Reflector lamps
KS L 2514-2011 Testing method on transmittance and emittance of heat glasses and evaluation of solar heat gain coefficient
KS R ISO 7876-5-2010(2020) Fuel injection equipment－Vocabulary－Part 5：Common rail fuel injection system
KS F 2577-2017(2022) Materials for shotcrete
KS R ISO 7876-5-2020 Fuel injection equipment－Vocabulary－Part 5：Common rail fuel injection system
KS F 2577-2017 Materials for shotcrete
KS F 2577-2022 Materials for shotcrete
KS B 6201-2002(2022) Pressure injection burners
KS F 2577-2002 Materials for shotcrete
KS B 6201-2022 Pressure injection burners
KS B 6201-2002(2017) Pressure injection burners
KS R ISO 7876-5:2010 Fuel injection equipment－Vocabulary－Part 5：Common rail fuel injection system
KS B 6201-1982 Pressure injection burners

SCC

NS-EN 463:1994 Protective clothing for use against liquid chemicals — Test method: Determination of resistance to penetration by a jet of liquid (Jet Test)
BS EN 463:1995 Protective clothing. Protection against liquid chemicals. Test method. Determination of resistance to penetration by a jet of liquid (jet test)
DANSK DS/EN ISO 17491-3:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test)
AENOR UNE 83609:1994 Projected concrete and mortar. Determination of compressive strength in situ. Penetration/extraction test.
06/30150354 DC EN ISO 17491-3. BS EN ISO 17491-3. Protective clothing. Test methods for clothing providing protection against chemicals. Part 3. Determination of resistance to penetration by a jet of liquid (jet test)
AENOR UNE-EN ISO 17491-3:2009 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008)
NS-EN ISO 17491-3:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008)
BS ISO 7876-5:2004 Fuel injection equipment. Vocabulary-Common rail fuel injection systems
MIL MIL-H-24146-1965 HEAD, SPRINKLER, FIRE PROJECTION, FOAM WATER
BS EN ISO 13468-2:2006 Plastics. Determination of the total luminous transmittance of transparent materials-Double-beam instrument
AWWA WQTC60584 Impact of Air Sparging and System Configuration on the Permeate Flux in a Submerged Hollow Fiber Membrane System
BS ISO 13468-2:1999 Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument
VDI/VDE 5575 BLATT 7-2019 X-ray optical systems - Refractive X-ray lenses
DANSK DS/CEN/TR 14920:2005 Jetting resistance of drain and sewer pipes - Moving jet test method
SN-CEN/TR 14920:2005 Jetting resistance of drain and sewer pipes — Moving jet test method
BS ISO 9261:2003 Agricurltural irrigation equipment. Emitters and emitting pipe. Specification and test methods
MIL MIL-H-37084-1975 HYPODERMIC INJECTION APPARATUS, JET, FOOT OPERATED
MIL MIL-PRF-1/338J-2009 Electron Tube, Transmitting Type 2E26
BS EN 379:1994 Specification for filters with switchable or dual luminous transmittance for personal eye-protectors used in welding and similar operations
AENOR UNE-EN 14488-2:2007 Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete
NS-EN 14488-2:2006 Testing sprayed concrete — Part 2: Compressive strength of young sprayed concrete

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE OR-16-C041-2016 A Non-Dimensional Mapping of a Dual-Port Vapor Injected Scroll Compressor
ASHRAE 3919-1995 Nozzle-Sprayed Flow Rate Distribution on a Horizontal Tube Bundle

International Organization for Standardization (ISO)

ISO 13468-2:1999 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument
ISO 17491-3:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test)
ISO 7876-1:1984 Fuel injection equipment — Vocabulary — Part 1: Fuel injection pumps
ISO 14681:1998 Diesel engines - Fuel injection pump testing - Calibration fuel injectors
ISO 7876-5:2021 Fuel injection equipment — Vocabulary — Part 5: Common rail fuel injection system
ISO 7876-5:2004 Fuel injection equipment - Vocabulary - Part 5: Common rail fuel injection system
ISO 19724:2016 Gasoline engines with direct injection - Cleanliness assessment of fuel injection equipment
ISO 9050:1990 Glass in building; determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance, and related glazing factors

Danish Standards Foundation

DS/EN 379:1994 Specification for welding filters with switchable luminous transmittance and welding filters with dual luminous transmittance
DS/CEN/TR 14920:2005 Jetting resistance of drain and sewer pipes - Moving jet test method
DS/ENV 299:1994 Oil pressure atomizing nozzels. Angle and spray characteristics
DS/EN 14786:2006 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test
DS/EN 14488-2:2006 Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete

Spanish Association for Standardization (UNE)

UNE-EN 463:1995 PROTECTIVE CLOTHING FOR USE AGAINST LIQUID CHEMICALS. TEST METHOD: DETERMINATION OF RESISTANCE TO PENETRATION BY A JET OF LIQUID (JET TEST)
UNE 83603:1994 SHOTCRETE. DETEERMINATION OF THE COMPRESSIVE STRENGTH "IN SITU" BY MEANS OF THE PENETROMETER.
UNE 10074:1979 FUEL INJECTION NOZZLES. SIZE S.
UNE-EN 14786:2007 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test
UNE-EN 14488-2:2007 Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4503.3:1997 Protective clothing - Protection against liquid chemicals - Test method: Determination of resistance to penetration by spray (Spray Test)
AS/NZS 4503.2:1997 Protective clothing - Protection against liquid chemicals - Test method: Determination of resistance to penetration by a jet of liquid (Jet test)
AS/NZS 4236:1994 Respiratory therapy equipment - Jet nebulizers and jet nebulizer air pumps

German Institute for Standardization

DIN EN ISO 13468-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) English version of DIN EN ISO 13468-2:2006-07
DIN 24290:1981-08 Jet pumps (ejectors); terms, classification
DIN 24291:1974 Jet pumps (ejectors); denomination of parts
DIN 24291:1974-04 Jet pumps (ejectors); denomination of parts
DIN EN ISO 17491-3:2008-12 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008); German version EN ISO 17491-3:2008
DIN 73372:1978-08 Fuel injection nozzles, size T and U
DIN 1349-1:1972 Transmisson of optical radiation; optical clear (nonscattering) media, quantities, symbols and units
DIN 5042-8:1985-07 Combustion lights and gas lights; injector jet pipes and air control screws
DIN EN 14786:2007 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test; English version of DIN EN 14786:2007-03
DIN 5042-8:1985 Combustion lights and gas lights; injector jet pipes and air control screws
DIN 24290:1981 Jet pumps (ejectors); terms, classification
DIN EN 14488-2:2006 Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete English version of DIN EN 14488-2:2006-09
DIN EN ISO 15029-1:2002 Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistance; Hollow-cone nozzle method (ISO 15029-1:1999); German version EN ISO 15029-1:1999
DIN EN 14488-2:2006-09 Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete; German version EN 14488-2:2006
DIN ISO 7876-2:1994 Fuel injection equipment; vocabulary; part 2: fuel injectors; identical with ISO 7876-2:1991
DIN EN ISO 17491-3:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008); English version of DIN EN ISO 17491-3:2008-12

Japanese Industrial Standards Committee (JISC)

JIS T 8032-3:2015 Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 3: Determination of resistance to penetration by a jet of liquid (jet test)
JIS D 3637:1996 Road vehicles -- Diesel fuel injection pump testing -- Calibrating injector

GSO

GSO ISO 17491-3:2013 Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 3: Determination of resistance to penetration by a jet of liquid (jet test)
OS GSO ISO 17491-3:2013 Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 3: Determination of resistance to penetration by a jet of liquid (jet test)
OS GSO ISO 7876-2:2013 Fuel injection equipment -- Vocabulary -- Part 2: Fuel injectors
GSO ISO 7876-2:2013 Fuel injection equipment -- Vocabulary -- Part 2: Fuel injectors
GSO ISO 7876-3:2013 Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors
GSO ISO 9050:2007 Glass in building – Determination of light Transmittance , Solar direct transmittance , Total Solar Energy transmittance , Ultraviolet transmittance and related glazing factors
GSO ISO 7876-1:2013 Fuel injection equipment -- Vocabulary -- Part 1: Fuel injection pumps
OS GSO ISO 9050:2007 Glass in building – Determination of light Transmittance , Solar direct transmittance , Total Solar Energy transmittance , Ultraviolet transmittance and related glazing factors
OS GSO ISO 7876-5:2013 Fuel injection equipment -- Vocabulary -- Part 5: Common rail fuel injection system

YU-JUS

JUS Z.C1.101-1990 Foaat branch pipes in combination jrith nonitors

General Motors Corporation (GM)

GM 9982223-2001 Transit Coating (Sprayable) Revision B

US-GSA

GSA A-A-3003 A-2004 LACQUER, SPRAYING, CLEAR AND PIGMENTED FOR INTERIOR USE

Military Standards (MIL-STD)

DOD A-A-53446-1988 SYRINGE, FOUNTAIN
DOD A-A-54875-1993 SPRAY BOTTLE, PLASTIC

RU-GOST R

GOST R ISO 17491-3-2009 Occupational safety standards system. Protective clothing providing protection from chemicals. Part 3. Method for determination of resistance to penetration by a jet of liquid (jet test)
GOST 17749-1972 Iet fuel. Spectrophotometric method for the determination of dicycles aromatic (naphthalene hydrocarbons) content
GOST 25645.121-1985 Penetration of cosmic rays into Earth's magnetosphere. Boundary penetration of protons
GOST R ISO 9073-17-2016 Textile. Test methods for nonwovens. Part 17. Determination of water penetration (spray impact)
GOST R 55778-2013 Jetguns. Technical conditions

American National Standards Institute （ANSI)

ANSI/NFPA 1964-2008 Standard for Spray Nozzles
ANSI/ASTM F1862:2000 Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)
ANSI/NFPA 16-2003 Insallation Of Deluge Foam-Water Sprinkler and Foam-Water Spray Systems

KR-KS

KS K ISO 17491-3-2017 Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid(jet test)
KS B 6017-1998(2023) Testing methods for steam jet air ejectors

American Society of Mechanical Engineers (ASME)

ASME PTC 24-1976 Ejectors
ASME PTC 24-1976(R1982) Ejectors

FI-SFS

SFS 3162-1976 Plant protection sprayer. Injector testing
SFS 3163-1976 Plant protection sprayer. Nozzle testing

HU-MSZT

MSZ 7729-1962 Sprayer circulation system spray hood and replaceable spray components

ESDU - Engineering Sciences Data Unit

ESDU 86030-1986 EJECTORS AND JET PUMPS - DESIGN FOR STEAM DRIVEN FLOW
ESDU 86030 A-2007 Ejectors and jet pumps. Design for steam driven flow.
ESDU 85032-1985 EJECTORS AND JET PUMPS - DESIGN AND PERFORMANCE FOR INCOMPRESSIBLE LIQUID FLOW
ESDU 85032 A-2007 Ejectors and jet pumps. Design and performance for incompressible liquid flow.

American Society for Testing and Materials (ASTM)

ASTM D4093-95 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4093-23 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4093-95(2014) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4093-95(2001)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4093-95(2010) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4093-95(2005)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4630-96(2008) Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
ASTM F1862-00a Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)

US-VA

VA 03 37 13-2011 SHOTCRETE

Society of Automotive Engineers (SAE)

SAE J529-1973 FUEL INJECTION TUBING
SAE J529-1985 FUEL INJECTION TUBING
SAE J529-2013 Fuel Injection Tubing
SAE AGS2023-12-2006 AGS2023 Stiffnuts Double Anchor, with Translucent Cap
SAE J427-1988 PENETRATING RADIATION INSPECTION
SAE J427B-1978 PENETRATING RADIATION INSPECTION
SAE J626-1998 Diesel Fuel Injection End-Mounting Flanges for Fuel Injection Pumps
SAE J2715-2007 Gasoline Fuel Injector Spray Measurement and Characterization
SAE AMS2650-1945 Fluoroscopic X-Ray Inspection

SAE - SAE International

SAE J529-1967 FUEL INJECTION TUBING
SAE J529-1960 FUEL INJECTION TUBING
SAE J529-1969 FUEL INJECTION TUBING
SAE J2713-2018 Direct Injection Gasoline Fuel Injector Characterization
SAE J427-2018 Penetrating Radiation Inspection
SAE J427-1983 Penetrating Radiation Inspection
SAE J521B-1973 FUEL INJECTION TUBING CONNECTIONS
SAE J626-2015 Diesel Fuel Injection - End-Mounting Flanges for Fuel Injection Pumps
SAE J626-1988 Diesel Fuel Injection - End-Mounting Flanges for Fuel Injection Pumps

CZ-CSN

CSN ON 70 4058-1966 glass injector
CSN 64 0716-1959 vapor transmission
CSN ON 07 7626-1967 filter jet

BE-NBN

NBN 548-1960 full jet spray gun

US-FCR

FCR VA 03 37 13-2011 SHOTCRETE
FCR FED FCGS 03361-1986 SHOTCRETE
FCR COE EM 1110-1-4005-1997 IN-SITU AIR SPARGING
FCR COE CEGS 11313-1998 PNEUMATIC SEWAGE EJECTORS
FCR UFGS-22 13 36-2009 PNEUMATIC SEWAGE EJECTORS

ACI - American Concrete Institute

ACI COMPILATION 18-1992 Shotcrete
ACI 506.3R-1991 Guide to Certification of Shotcrete Nozzlemen
ACI CCS4-2000 Shotcrete for the Craftsman Shotcrete for the Craftsman ((Index Only))
ACI 506R-2005 Guide to Shotcrete
ACI 506R-1990 Guide to Shotcrete

SAE International

SAE J2713-2024 Direct injection gasoline fuel injector characteristics

(U.S.) Ford Automotive Standards

FORD M99B153-A-1980 SPRAY BOOTH COATING - WATER BASE - TACKY - CLEAR

VN-TCVN

TCVN 7737-2007 Glass in building.Method for determination of light transmittance, light reflectance, total solar energy transmittance and ultraviolet transmittance

SE-SIS

SIS SS-ISO 7876-2:1992 Fuel injection equipment — Vocabulary — Part 2: Fuel injectors
SIS SS 13 72 21-1984 Concrete testing — Hardened shotcrete — Thickness of shotcrete

PK-PSQCA

PS 399-1964 Aluminium Paint, spraying for General purposes, in Dual Container.

US-General Services

General Services A-A-3003 B-2009 Lacquer, Spraying, Clear and Pigmented for Interior Use

U.S. Air Force

AIR FORCE MS24121 REV A-1956 WIRING HARNESS, SINGLE POINT REFUELING

API - American Petroleum Institute

API REPORT 86-36-1987 THE EFFECTS OF STRESS AND PORE PRESSURE ON PENETRATION OF JET PERFORATORS IN BEREA SANDSTONE - FINAL REPORT (INCLUDES ERRATA AND ADDENDA)

U.S. Military Regulations and Norms

ARMY MIL-N-12314 E-1983 NOZZLES, FIRE HOSE, WATER: SPRAY AND STREAM
ARMY MIL-N-12314 E NOTICE 1-1998 NOZZLES, FIRE HOSE, WATER: SPRAY AND STREAM

CENELEC - European Committee for Electrotechnical Standardization

EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements

Association of German Mechanical Engineers

VDI/VDE 5575 Blatt 7-2011 X-Ray optical systems - Refractive X-ray lenses
VDI/VDE 5575 Blatt 5-2011 X-ray optical systems - Transmission zone plates
DVS 2243 Beiblatt 1-2006 Determination of transmittance of laser beam transparent joint partners during laser transmission welding of thermoplastics
DVS 2243 Beiblatt 1-2007 Determination of transmittance of laser beam transparent joint partners during laser transmission welding of thermoplastics

VDI - Verein Deutscher Ingenieure

VDI/VDE 5575 BLATT 7-2018 Roentgenoptische Systeme - Refraktive Roentgenlinsen
VDI/VDE 5575 Blatt 5-2009 X-Ray optical systems - Transmission zone plates
VDI/VDE 5575 BLATT 5-2018 X-ray optical systems - Transmission zone plates

American Concrete Institute

ACI 506.2M-2013 Specification for Shotcrete
ACI 506.2-2013 Specification for Shotcrete
ACI 506R-2016 Guide to Shotcrete

Standard Association of Australia （SAA）

ISO 7876-2:1991/Amd.1:1999 Fuel injection equipment — Vocabulary — Part 2: Fuel injectors AMENDMENT 1
ISO 7876-1:1990/Amd.1:1999 Fuel injection equipment — Vocabulary — Part 1: Fuel injection pumps AMENDMENT 1

CEN - European Committee for Standardization

EN 14527:2016 Shower trays for domestic purposes

US-COE

COE CEGS 11313-1998 PNEUMATIC SEWAGE EJECTORS

Lithuanian Standards Office

LST EN 14786-2006 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test

Indonesia Standards

SNI 7752-2012 Procedure for measuring soil infiltration rate in the field using a double ring infiltrometer