eh cooling chip
eh cooling chip, Total:73 items.
The international standard classification for "eh cooling chip" includes: Electric filters , Printed circuits and boards , Films and sheets , Other methods of testing of metals , Barrels. Drums. Canisters .
The Chinese standard classification for "eh cooling chip" includes: General grippers , Filter and delay line , Technical management , Printed circuit , Plastic profile , Metal physical property test method , Packaging material and container .
Professional Standard - Aviation
- HB 3408-1982 Guide block spacer H=0.6~2.1mm
- HB 3409-1982 Supporting spacer H=0.6~2.1mm
Professional Standard - Electron
- SJ 2644.8.2-1985 Cold press dies - Sheet spring
- SJ 51518/1-2004 Filters power type LC410 - 9005 - E - E - 1E - B - 3 detail specification for
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 44295-2024 Epoxide woven E-glass prepreg for multilayer printed boards
- GB/T 41792-2022 Plastics—Film and sheeting—Determination of cold-crack temperature
- GB/T 39042-2020 Measurement of the magnetic properties of electrical steels by means of a single sheet tester—H-coil method
Professional Standard - Aerospace
- QJ 576-1981 Cold-pressed solder tab
Professional Standard - Machinery
- JB/T 7659.5-1995 Finned heat exchanger for freon refrigeration device
- JB/T 4211.8-1996 Molds for Cold-Heading Screws Final Upsetting Punch Pin H Type
Professional Standard-Packaging
- BB/T 0075-2017 Packaging containers-Aluminum cans for air-conditioning refrigerant
Professional Standard - Chemical Industry
- HG/T 4959-2016 Batch off unit
Magyar Szabványügyi Testület
- MSZ 11092-1958 Refrigerator gasket
- MSZ 3451/2-1982 Refrigeration capacity detection disc compression
- MSZ 7325-1965 Cold-bent c steel with uneven surface, h>b
- MSZ 7326-1965 Cold-bent c-steel with uneven surfaces, h
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)
- ASHRAE 15& 34-2010 Safety Standard for Refrigeration Systems Incorporates ANSI/ASHRAE Standard 15-2007 and Addenda a, b, c, d, e, f, g, h, and i
- ASHRAE OR-16-C016-2016 Comprehensive Assessment of Centrifugal Chillers Using Next Generation Refrigerant R1233zd(E)
- ASHRAE 15& 34-2013 Safety Standard for Refrigeration Systems Includes ANSI/ASHRAE addenda listed in Appendix H
- ASHRAE 15 & 34-2013 Safety Standard for Refrigeration Systems (Includes ANSI/ASHRAE addenda listed in Appendix H)
- ASHRAE HI-02-1-3-2002 Performance of Finned Coil Condensers Optimized for New HFC Refrigerants
- ASHRAE 15& 34-2007 ANSI/ASHRAE Standard 15-2007 Safety Standard for Refrigeration Systems and ANSI/ASHRAE Standard 34-2007 Designation and Safety Classification of Refrigerants Standard 15 Errata: 10/01/2009, Addenda a, b, c, d, and e, Addenda f& h, Addenda g, and Addenda
Military Standards (MIL-STD)
- MIL MIL-H-22832B-1972 HEAT INTERCHANGERS, REFRIGERANT 12 (SUPERSEDING MIL-H-22832A)
- MIL MIL-DTL-18239E-2000 EARPHONE H-87B/U (SUPERSEDING MIL-E-18239D)
- MIL MIL-E-5589C-1973 EARPHONE, (EXTENDED RANGE), H-301/U (SUPERSEDING MIL-E-5589B) (S/S BY MIL-E-5589D)
- MIL MIL-E-18239D-1982 EARPHONE H-87B/U (SUPERSEDING MIL-E-18239C) (S/S BY MIL-DTL-18239E)
- MIL MIL-PRF-25670/2C-1997 EARPHONE ELEMENT, HIGH-AND LOW-ALTITUDE, H-143/AIC, AND LOW-ALTITUDE, WATER-IMMERSIBLE, H-143A/AIC (SUPERSEDING MIL-E-25670/2B)
- MIL MIL-H-44298-1987 HAM SLICES IN BRINE, THERMOSTABILIZED, TRAY PACK(S/S BY MIL-H-44298A)(SUPERSEDING PP-H-002127A)
- MIL MIL-H-44298A-1990 HAM SLICES IN BRINE, THERMOSTABILIZED, TRAY PACK(S/S BY MIL-H-44298B)(SUPERSEDING MIL-H-44298)
- MIL MIL-H-44298B-1993 HAM SLICES IN BRINE, THERMOSTABILIZED, TRAY PACK(S/S BY MIL-H-44298C)(SUPERSEDING MIL-H-44298A)
PL-PKN
- PN C94153-53-1987 Rubber vulcanized for technical articles Rubber vulcanized type E class H
Defense Logistics Agency
- DLA A-A-59567-2001 HOSE AND HOSE ASSEMBLIES, RUBBER (YARN OR FABRIC REINFORCED) WATER SERVICE [Superseded: DLA ZZ-H-601 E CANC NOTICE 1, DLA ZZ-H-601 E, DLA ZZ-H-601 D, DLA ZZ-H-601 C, DLA ZZ-H-601 B (1), DLA ZZ-H-601 B, DLA ZZ-H-601 A (1), DLA ZZ-H-601 A]
- DLA A-A-55190-1993 SEWING KIT [Superseded: DLA MIL-S-3276 H CANC NOTICE 3, DLA MIL-S-3276 H CANC NOTICE 2, DLA MIL-S-3276 H NOTICE 1, DLA MIL-S-3276 H, DLA MIL-S-3276 G, DLA MIL-S-3276 F, DLA MIL-S-3276 E (4), DLA MIL-S-3276 E (2), DLA MIL-S-3276 E]
- DLA A-A-59613-2001 HOSE AND HOSE ASSEMBLIES, NONMETALLIC SPRAY [Superseded: DLA ZZ-H-521 F CANC NOTICE 1, DLA ZZ-H-521 F, DLA ZZ-H-521 E, DLA ZZ-H-521 D, DLA ZZ-H-00521 C, DLA ZZ-H-521 B (2), DLA ZZ-H-521 B (1), DLA ZZ-H-521 B, DLA ZZ-H-521 A (3), DLA ZZ-H-521 A
- DLA A-A-59495-1999 GLOVES, WOMEN'S (SUPERSEDES MIL-G-1007) [Superseded: DLA MIL-G-1007 H CANC NOTICE 1, DLA MIL-G-1007 H CANC NOTICE 1, DLA MIL-G-1007 H INT AMD 1, DLA MIL-G-1007 H, DLA MIL-G-1007 G, DLA MIL-G-1007 F, DLA MIL-G-1007 E (2), DLA MIL-G-1007 E (1), DL
- DLA A-A-59450 VALID NOTICE 1-2004 ELBOWS, TUBE, STREET, 90 AND 45 DEGREE, SOLDER-JOINT, REFRIGERATION
- DLA A-A-59450-1999 ELBOWS, TUBE, STREET, 90 AND 45 DEGREE, SOLDER-JOINT, REFRIGERATION
- DLA SMD-5962-92325 REV C-2012 MICROCIRCUIT, LINEAR, 2.4 AMP, 55 VOLT H-BRIDGE, MONOLITHIC SILICON
RO-ASRO
- STAS 11405-1980 Additived hydraulic oils OILS H 9 E P OIL
- STAS 6933-1964 Refrigeration equipment. Gate type is C, D, E type Pn 25kgf/cm2 faucet
- STAS 8990/2-1980 Refrigerating plants GASKETS FOR STEEL FLANGES FOR VALVES AND PIPES Dimensions
CZ-CSN
- CSN 22 0811 Cast.1-1983 Cutting tips, form G, H, J
- CSN 14 0618-1992 Hermetic refrigerating compressors up to 560 cm3. s -1 (2,0 m3. h -1) Technical requirements on construction, refrige-rating technique and method of tests
U.S. Military Regulations and Norms
- ARMY AA-R-211 G (3)-1975 REFRIGERATORS, MECHANICAL, HOUSEHOLD (ELECTRICAL, SELF-CONTAINED) [Use In Lieu Of: ARMY AA-R-00211 H]
American National Standards Institute (ANSI)
- ANSI/ASHRAE 34-2022 add e-2023 Designation and Safety Classification of Refrigerants addendum e
- ANSI/ASHRAE 147-2019 Includes ANSI/ASHRAE addenda listed in Appendix E Reducing the Release of Halogenated Refrigerants from Refrigerating and Air-Conditioning Equipment and Systems
Gosstandart of Russia
- GOST R 53849-2010 Frozen pressed skinless cod fillet. Specifications
- GOST 16239-1970 Chill moulds. Cooling pins. Dimensions
- GOST 35100-2024 Salted frozen fish fillet for baby food. Technical conditions
Society of Motion Picture and Television Engineers (SMPTE)
- SMPTE ST 32M-1998 Video Recording - 1/2-in Type H - Cassette, Tape and Records
- SMPTE 32M-1998 Video Recording - 1/2-in Type H - Cassette, Tape and Records
German Institute for Standardization
- DIN 69001-55:1994 Machine tools; multi-spindle heads; mounting rings types E to H
- DIN 69001-55:1994-01 Machine tools; multi-spindle heads; mounting rings types E to H
NATO - North Atlantic Treaty Organization
- STANAG 2234-2013 ALLIED JOINT DOCTRINE FOR HOST NATION SUPPORT (ED 3)
- AJP-4.5-2013 ALLIED JOINT DOCTRINE FOR HOST NATION SUPPORT (ED B; Ver. 1)
American Society of Mechanical Engineers (ASME)
- ASME B29.400-2001 Combination,
- ASME B29.400-2001(R2013) Combination,
British Standards Institution (BSI)
- BS 219:1925 Soft solders (grades a,b,c,d,e,f,g,h and j)
- BS ISO 5610-14:2014 Tool holders with rectangular shank for indexable inserts. Style H
- BS ISO 5610-14:2010 Tool holders with rectangular shank for indexable inserts. Style H
- BS 219:1932 Soft solders (grades a,b,c,d,e,f,g,h,j and k)
Indonesia Standards
- SNI 2696-2013 Fillet ikan beku
GCC Standardization Organization
- GSO 1406:2021 FROZEN FISH FILLETS
Korean Agency for Technology and Standards (KATS)
- KS H 7113-2023 Frozen fish fillet
- KS H 6032-2021 Frozen fish cutlet
- KS H 7113-2018 Frozen Fish Fillet
- KS H 6032-2016 Frozen fish cutlet
Kingdom of Bahrain Testing and Metrology Directorate
- BH GSO 1406:2022 FROZEN FISH FILLETS
Aerospace Industries Association/ANSI Aerospace Standards
- AIA/NAS NASM35206-2010 SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, CARBON STEEL, UNC-2A Rev 2 [Superseded: DLA MS35206 REV H CANC NOTICE 1, DLA MS35206 REV H (1), DLA MS35206 REV H, DLA MS35206 REV G, DLA MS35206 REV F, DLA MS35206 REV E, DLA MS35206 REV D, DLA MS35206]
Institute of Interconnecting and Packaging Electronic Circuits (IPC)
- IPC TM-650 2.1.1-2004 Microsectioning, Manual Method Revision E
The Directorate General of Specifications and Metrology (DGSM)
- OS GSO 2043:2010 FROZEN FISH FILLET BLOCKS
United States Navy
- NAVY UFGS-31 62 16.16-2011 STEEL H-PILES
European Association of Aerospace Industries
- AECMA PREN 2041-1976 Square Steel Bars - Drawn Dimensions - Tolerances h 11/h 12 Aerospace Series Edition 1