Forward Spectrum Reverse Spectrum
Forward Spectrum Reverse Spectrum, Total:270 items.
The international standard classification for "Forward Spectrum Reverse Spectrum" includes: Other standards related to protection of and in buildings , Chemical analysis , Electricity. Magnetism. General aspects , Optics and optical measurements in general , Protection against crime , Couplings , Air transport , Laboratory medicine .
The Chinese standard classification for "Forward Spectrum Reverse Spectrum" includes: Coal mine special equipment , Hygiene, safety and labor protection , Papermaking in general , Basic standards and general methods , Comprehensive Technology , Optical instrument in general , Combination grippers , Crime judging technology , Technical management , Technical Management , Projection equipment and its accessory , Coupling, brake and speed variator , AGS system and equipment , Medical laboratory equipment , Pressure vessel .
Professional Standard - Non-ferrous Metal
- YSBS 13313-2022 Grain-oriented silicon steel (30Q140) spectrum standard sample
Professional Standard - Coal
- MT/T 841-1999 Steel thin-walled and reverse air door
- MT/T 707-1997 Method for identifying tendency of coal to spontaneous combustion by oxygen adsorption with chromatograph
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 450-2008 Paper and board-Sampling for testing and identification of machine and cross direction wire side and felt side
- GB/T 26828-2011 Specification for multispectral antireflection coatings
- GB/T 7287.10-1987 Measuring method for normal spectral emittance of infrared heater
- GB/T 36540-2018(英文版) VIS SWIR spectral reflectivity measurement of water
- GB/T 20104-2006 Method for identifying tendency of coal to spontaneous combustion by oxygen absorption with chromatograph
- GB/T 28632-2012 Surface chemical analysis—Auger electron spectroscopy and X-ray photoelectron spectroscopy—Determination of lateral resolution
- GB/T 7286.2-1987 Test method for normal spectral emittance of metals and nonmetallic materials
Taiwan Provincial Standard of the People's Republic of China
- CNS 13298-1993 Method of Test for Water Permeability of Geotextiles by Permittivity
- CNS 9216-1982 Grooved Pins, Half Length Reverse Grooved
Military Standard of the People's Republic of China-General Armament Department
- GJB 4904-2003 General specifications for ultrashort wave spatial spectrum estimation and direction finding systems
- GJB 9494-2018 General specifications for shortwave spatial spectrum estimation and direction finding systems
- GJB 5283-2004 Specifications for excitation reversal switch of ship DC motors
- GJB 8638-2015 Specifications for excitation reversal switch of ship DC motors
- GJB 5269-2003 Specification for orthogonal three-way pyramidal fabrics
- GJB 2468-1995 Specification for quartz fiber orthogonal three-way braid
Professional Standard - Aviation
- HB 1545-1987 Square Guide Bearing
- HB 1281-1987 Square Guide Bearing
- HB 3957-1987 Single Groove Square Guiding Bearing
- HB 2657-1976 Radial Turning Tool Adjustable Tool Holder
- HB 4305-1989 Square Supporting Guide Plate
Group Standards of the People's Republic of China
- T/AHEPI 0002-2023 Technical guide for hyperspectral targeted imaging remote sensing monitoring of trace gases
- T/YYHG 0003-2022 Silica-Based Reversed-Phase Columns
- T/CIMA 0019-2019 Proton transfer reaction mass spectrometers
- T/JJSY 012-2022 Technical specification for general materials for reverse umbrellas
- T/GZDFA 002-2022 Guidelines of knowledge graph technology for credit risk control
- T/QGCML 3989-2024 Ultrasonic water meter based on NFC reverse charging
- T/CATIS 015-2023 Guidelines for on-line reverse factoring
- T/GXAS 768-2024 Determination of trans,trans muconic acid in urine by liquid chromatography-mass spectrometry
Professional Standard - Public Safety Standards
- GA/T 540-2021 Forensic coaxial photography apparatus
- GA 540-2005 Forensic coxial photography apparatus
Jiangsu Provincial Standard of the People's Republic of China
- DB32/T 3983-2021 Pump station reverse power generation technical specification
Professional Standard - Electron
- SJ/T 2658.3-2015 Measuring method for semiconductor infrared-emitting diode - Part 3: Reverse voltage and reverse current
- SJ 1487-1979 Detail specification for reverse blocking high-frequency thyristors
- SJ 1787-1981 Method of measurement for rated peak working reverse voltage and reverse current of silicon single phase bridge rectifiers,up to 5A
- SJ 452-1973 Methods of measurement for reverse current of high-voltage rectifier tubes
Hebei Provincial Standard of the People's Republic of China
- DB13/T 5222-2020 Determination of Purity of Nematic Thermotropic Liquid Crystal Monomer by Gas Chromatography
Professional Standard - Machinery
- JB/T 7846.2-2007 Universal coupling with spider for leveler
- JB/T 7626-1994 Test method for reverse blocking triple pole thyristors
- JB/T 7846.1-2007 Universal coupling with plain block for leveler
- JB/T 7471-1994 Directional Reflection Screen for Process Cinematography
- JB/T 7846.2-1995 Cross shaft type universal coupling for straightening machine
- JB/T 7626-2013 Testing Methods for Reverse-blocking Triode Thyristors
- JB/T 9478.12-1999 Measuring methods of photocell-Inverse breakdown voltage
- JB/T 7846.1-1995 Slider Type Universal Coupling for Straightening Machine
Professional Standard - Civil Aviation
- MH/T 6035-2005 Taxiway edge retro-reflective marker
中国民用航空局
- MH/T 6035-2018 Taxiway edge retro-reflective marker
工业和信息化部/国家能源局
- JB/T 13114-2017 Single/double-action indirect horizontal aluminium extrusion press
Professional Standard - Medicine
- YY/T 1303-2015 Nucleic acid amplification reverse dot blot reagent(kit)
National Metrological Verification Regulations of the People's Republic of China
- JJG(化工) 14-1989 Verification Regulations for Isolators, Inverters, and Boosters
Inner Mongolia Provincial Standard of the People's Republic of China
- DB15/T 2148-2021 Determination of Acrol in Ruminant Feces by Gas Chromatography-Mass Spectrometry
Professional Standard - Aerospace
- QJ 3089-1999 Method for Positive Presure Leakage Detection of Helium Mass Spectrum
Professional Standard - Post and Telecommunication
- YD/T 2168-2010 Technique requirement of IPv6. Extensions to IPv6 neighbor discovery for inverse discovery specification
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence
- GJB 2468A-2006 Specification for orthogonal three dimensional quartz fabric
Guangdong Provincial Standard of the People's Republic of China
- DB44/T 1709-2015 Gas Chromatography-Mass Spectrometry for the Determination of Benzene Series in Corrected Products
Korean Agency for Technology and Standards (KATS)
- KS B ISO 9533:2012 Earth-moving machinery-Machine-mounted forward and reverse audible warning alarm-Sound test method
- KS B ISO 9533-2012(2022) Earth-moving machinery-Machine-mounted forward and reverse audible warning alarm-Sound test method
- KS R 5074-1998(2008) Back-up lamp switches for automobiles
- KS R 5070-2004(2009) Back-up lamp switches for automobiles
- KS A 3513-1997 Retroreflectors-Optical properties-Vocabulary
- KS A 3513-2015(2020) Retroreflectors — Optical properties — Vocabulary
- KS A 3513-2015 Retroreflectors — Optical properties — Vocabulary
- KS A 3513-2020 Retroreflectors — Optical properties — Vocabulary
- KS A 3514-1997 Retroreflectors-Optical properties-Measuring method
- KS B ISO 7801:2002 Metallic materials-Wire-Reverse bend test
- KS A 3514-2015 Retroreflectors — Optical properties — Measuring method
- KS B ISO 7801:2015 Metallic materials-Wire-Reverse bend test
- KS B ISO 7801-2002(2012) Metallic materials-Wire-Reverse bend test
- KS B ISO 7801-2015 Metallic materials-Wire-Reverse bend test
- KS B 0837-2001 REVERSE BEND TEST FOR WELDED BUTT JOINT
- KS A 3514-2015(2020) Retroreflectors — Optical properties — Measuring method
- KS B 3507-2001(2011) Inverse dovetail cutters and dovetail cutters with cylindrical shanks
- KS C 7023-1986 Testing Methods for Reverse Blocking Triode Thyristors
- KS C 7023-1978 Testing Methods for Reverse Blocking Triode Thyristors
- KS C 7023-2020 Testing Methods for Reverse Blocking Triode Thyristors
- KS C 7023-1978(2013) Testing Methods for Reverse Blocking Triode Thyristors
CZ-CSN
- CSN ISO 9533:1993 Earth-moving machinery. Machine-mounted forward and reverse audible warning alarm. Sound test method
- CSN 35 8738-1964 Transistore. Measurement of reverse voltages
- CSN 42 0422-1983 Reverse bend testing of wire
- CSN ISO 9649:1994 Metallic materials. Wire. Reverse torison test
- CSN ON 27 3525-1963 Cable carriage movement for single-sided cables. reverse
- CSN 35 8775-1987 Light-emitting diodes. Noise measurement in forward direction
- CSN ISO 7801:1994 Metallic materials. Wire. Reverse bend test
- CSN 35 8732-1964 Semiconductor diodes. Measurement of forward current
- CSN 35 8734-1975 Semieonductor devices. Diodcs. Measurement of reverse current.
IETF - Internet Engineering Task Force
- RFC 5496-2009 The Reverse Path Forwarding (RPF) Vector TLV
- RFC 7891-2016 Explicit Reverse Path Forwarding (RPF) Vector
- RFC 8500-2019 IS-IS Routing with Reverse Metric
- RFC 3024-2001 Reverse Tunneling for Mobile IP@ revised
- RFC 2390-1998 Inverse Address Resolution Protocol (Obsoletes: 1293)
- RFC 2864-2000 The Inverted Stack Table Extension to the Interfaces Group MIB
- RFC 3122-2001 Extensions to IPv6 Neighbor Discovery for Inverse Discovery Specification
- RFC 903-1984 A Reverse Address Resolution Protocol (Part of Std 38)
SAE - SAE International
- SAE AIR6064-2018 Reverse Thrust
- SAE J326-2018 Nomenclature - Hydraulic Backhoes
- SAE J326-1980 Nomenclature - Hydraulic Backhoes
- SAE J326-2020 Nomenclature-Hydraulic Backhoes
- SAE AS95234/2-2014 CONNECTOR@ RECEPTACLE@ SQUARE FLANGE@ REVERSE BAYONET COUPLING@ BOX MOUNT@ FRONT@ NO ACCESSORY THREAD
- SAE AS95234/6-2014 CONNECTOR@ PLUG@ REVERSE BAYONET COUPLING
- SAE AS85731/1-2004 FASTENER@ ELECTRONIC EQUIPMENT@ POSITIVE SELF-LOCKING
- SAE AS85731/1B-2015 FASTENER@ ELECTRONIC EQUIPMENT@ POSITIVE SELF-LOCKING
- SAE AS85731/1A-2011 FASTENER@ ELECTRONIC EQUIPMENT@ POSITIVE SELF-LOCKING
- SAE AS95234/9-2014 CONNECTOR@ PLUG@ REVERSE BAYONET COUPLING@ GROUNDING
- SAE ARP355A-2004 Terminology of Dual@ and Coaxial Counter-Rotating Propellers
- SAE AS95234/13-2014 CONNECTOR RECEPTACLE@ REVERSE BAYONET COUPLING@ BULKHEAD FEED-THRU
- SAE AS95234/10-2014 PROTECTIVE COVER@ CONNECTOR PLUG@ REVERSE BAYONET COUPLING
- SAE ARP355-1946 Terminology of Dual@ and Coaxial Counter-Rotating Propellers
Institute of Electrical and Electronics Engineers (IEEE)
- IEEE Std 2807.3-2022 IEEE Guide for Electric-Power-Oriented Knowledge Graph
- IEEE 2807.3-2022 IEEE Guide for Electric-Power-Oriented Knowledge Graph
- IEEE P2807.3/D1, June 2022 IEEE Approved Draft Guide for Electric-Power-Oriented Knowledge Graph
- IEEE Std C37.112-1996 Inverse-time characteristic equations for overcurrent relays
International Telecommunication Union (ITU)
- ITU-T Q.86.4-1997 Stage 2 Description for Charging Supplementary Services: International Freephone Service (IFS) - Series Q: Switching and Signalling Functions and Information Flows for Services in the ISDN - Supplementary Services Study Group 11; 22 pp
- ITU-T Q.86-1993 Stage 2 Description for Charging Supplementary Services Clause 3 - Reverse Charging (REV) - General Recommendations on Telephone Switching and Signalling Functions and Information Flows for Services in the ISDN Study Group XI
- ITU-T Q.86-1995 Stage 2 Description for Charging Supplementary Services Clause 7 - International Telecommunication Charge Card (ITCC) - General Recommendations on Telephone Switching and Signalling Functions and Information Flows for Services in the ISDN Study Group 11
- ITU-T I.256. 3-1992 Reverse Charging (Study Group I) 13 pp
- ITU-T I.256.3 SPANISH-1992 Reverse Charging (Study Group I) 13 pp
- ITU-T I.256.3 FRENCH-1992 Reverse Charging (Study Group I) 13 pp
- ITU-T I.256.3-1992 Reverse Charging (Study Group I) 13 pp
SCC
- AWWA MTC64608 Dewatering Reverse Osmosis Concentrate Using Forward Osmosis
- AASHTO T 257-1996(2013) Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices
- BS PD IEC TR 62316:2003 Guidance for the interpretation of OTDR backscattering traces
- DANSK DS/IEC/TR 62316:2007 Guidance for the interpretation of OTDR backscattering traces
- BS PD IEC/TR 62316:2007 Guidance for the interpretation of OTDR backscattering traces
American Society for Testing and Materials (ASTM)
- ASTM D4993-89(2003) Standard Practice for Calculation and Adjustment of Silica (SiO 2 ) Scaling for Reverse Osmosis
- ASTM D4993-89(1998)e1 Standard Practice for Calculation and Adjustment of Silica (SiO 2 ) Scaling for Reverse Osmosis
- ASTM E808-23 Standard Practice for Describing Retroreflection
- ASTM E1709-00e1 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer
- ASTM E1709-00 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer
- ASTM RR-E12-2000 2020 E0810-Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
- ASTM D4993-08 Standard Practice for Calculation and Adjustment of Silica (SiO 2 ) Scaling for Reverse Osmosis
- ASTM D8024-23 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
- ASTM D8024-16 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
- ASTM D8018-15(2020) Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
- ASTM E808-01 Standard Practice for Describing Retroreflection
- ASTM E808-99a Standard Practice for Describing Retroreflection
- ASTM E493/E493M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
- ASTM E573-01(2021) Standard Practices for Internal Reflection Spectroscopy
- ASTM E493/E493M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
- ASTM E808-01(2009) Standard Practice for Describing Retroreflection
US-FCR
- FCR COE CERC-94-1 FINAL REPORT-1994 THREE-PARAMETER CHARACTERIZATION OF SHALLOW-WATER DIRECTIONAL WIND WAVE SPECTRA
ESDU - Engineering Sciences Data Unit
- ESDU 94035 B-2011 The correction of measured noise spectra for the effects of ground reflection
- ESDU 94035 B-2008 The correction of measured noise spectra for the effects of ground reflection
- ESDU 94035 A-1995 The correction of measured noise spectra for the effects of ground reflection
- ESDU 17011-2018 Power Spectral Density and Bandwidth Correction of Spectrum Level
- ESDU 73002 B-1976 Fatigue of steel spline assemblies under reversed torsion.
Standard Association of Australia (SAA)
- AS 1906.3:1992 Retroreflective materials and devices for road traffic control purposes - Raised pavement markers (retroreflective and non-retroreflective)
Association Francaise de Normalisation
- NF V18-235*NF EN 15781:2009 Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation
- NF A49-862:1988 Steel tubes. Straightening test on tubular half-ferrule.
- NF X21-061:2008 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution.
- NF E58-070:1998 Earth-moving machinery. Volumetric ratings for backhoe buckets.
- NF EN ISO 8741:1997 Grooved pins with progressive grooves reversed over half the length, non-opening
Society of Automotive Engineers (SAE)
- SAE J326-2012 Nomenclature Hydraulic Backhoes
- SAE J326-1986 Nomenclature Hydraulic Backhoes
- SAE J/ISO 9533-2003 Earth-moving machinery Machine-mounted forward and reverse audible warning alarm Sound test method Identical to ISO 9533:1989; Superseding SAE J1446
- SAE J49-1980 Specification Definitions Hydraulic Backhoes
- SAE J49-2012 Specification Definitions - Hydraulic Backhoes
- SAE AS95234/2-2019 CONNECTOR, RECEPTACLE, SQUARE FLANGE, REVERSE BAYONET COUPLING, BOX MOUNT, FRONT, NO ACCESSORY THREAD
- SAE AS95234/6-2020 CONNECTOR, PLUG, REVERSE BAYONET COUPLING
- SAE AS95234/6A-2023 CONNECTOR, PLUG, REVERSE BAYONET COUPLING
- SAE AMS1540B-1992 Cleaner, Thrust Reverser, Water Base
- SAE AS95234/2A-2023 CONNECTOR, RECEPTACLE, SQUARE FLANGE, REVERSE BAYONET COUPLING, BOX MOUNT, FRONT, NO ACCESSORY THREAD
- SAE AMS1540C-2008 Cleaner, Thrust Reverser Water-Base
- SAE AS95234/4-2019 CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, SQUARE FLANGE, PANEL MOUNT, FRONT, WITH ACCESSORY THREAD
- SAE AS95234/9-2020 CONNECTOR, PLUG, REVERSE BAYONET COUPLING, GROUNDING
- SAE AS95234D-2024 Connectors, Electrical, Reverse Bayonet, General Specification for
- SAE AS95234/9A-2023 CONNECTOR, PLUG, REVERSE BAYONET COUPLING, GROUNDING
- SAE AS95234A-2020 Connectors, Electrical, Reverse Bayonet, General Specification for
- SAE AS95234B-2021 Connectors, Electrical, Reverse Bayonet, General Specification for
- SAE AS95234C-2023 Connectors, Electrical, Reverse Bayonet, General Specification for
- SAE AMS1545B-2008 Cleaner, Thrust Reverser Alkaline, Water-Base
- SAE AMS1545A-1992 Cleaner, Thrust Reverser Alkaline, Water-Base
- SAE AS95234/10-2019 PROTECTIVE COVER, CONNECTOR PLUG, REVERSE BAYONET COUPLING
SE-SIS
- SIS 11 26 27-1965 Reverse bend testing of reinforcing steel bar
- SIS SS 11 26 27-1981 Steel — Reinforcing bar — Reverse bend testing
- SIS 11 26 22-1969 Reverse bend testing of wire
- SIS SS 11 26 22-1983 Metallic materials - Wire - Reverse bend test
HU-MSZT
- MNOSZ 18266-1956 Salesman's desk (reverse)
- MSZ 3824-1958 Hammer with gear and reverse disc
- MI 4300/7-1983 Metal welding concept detecting reverse welding
ET-QSAE
- ES G.B8.311-1973 Steel wire reverse bending test
PL-PKN
- PN T01504-59-1987 Diodes Measuring methods Reverse recovery time t? and reverse recovery current i,r
- PN H04407-1990 Metals Reverse bend testing of sheet and strip
PK-PSQCA
- PS 245-1963 REVERSE BEND TESTING OF STEEL WIRE
British Standards Institution (BSI)
- BS EN ISO 8741:1998(2008) Grooved pins — Half - length reverse - taper grooved
- BS 2G 196:1971 Specification for static invertors
- BS EN 16246:2012 Agricultural machinery. Backhoes. Safety
- BS ISO 18516:2006(2010) Surface chemical analysis — Auger electron spectroscopy and X - ray photoelectron spectroscopy — Determination of lateral resolution
- BS ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
- BS AU 145e:2018 Specification for retroreflecting number plates
- BS AU 145d:1998 Specification for retroreflecting number plates
- BS EN 62129:2006 Calibration of optical spectrum analyzers
- BS ISO 9649:2023 Metallic materials. Wire. Reverse torsion test
- BS 9300 C582-584:1971 Detail specifications for reverse blocking triode thyristors
German Institute for Standardization
- DIN SPEC 50300:2013 Measuring geometries for assessing the night visibility of retroreflective materials with respect to the retroreflective properties
- DIN 74069:1996 Retro-reflective registration plates for motor vehicles and trailers
- DIN SPEC 50300:2013-03 Measuring geometries for assessing the night visibility of retroreflective materials with respect to the retroreflective properties
- DIN ISO 9649:2018-01 Metallic materials - Wire - Reverse torsion test (ISO 9649:2016)
- DIN ISO 7801:2008 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984); English version of DIN ISO 7801:2008-10
ZA-SANS
- VC 8062-1998 Retro-reflective number plates for motor vehicles
VDE - VDE Verlag GmbH@ Berlin@ Germany
- VDE-AR-E 2715-3-2012 Vorwaertsspannung-Binning von LEDs
North Atlantic Treaty Organization Standards Agency
- STANAG 1041-2001 ANTI-SUBMARINE EVASIVE STEERING - ATP-3(B)
Japanese Industrial Standards Committee (JISC)
- JIS B 7166:1983 Reflector for 35 mm motion-picture projectors
- JIS Z 4818:1984 Reducing materials for back scattering X-rays
- JIS Z 4816:1975 Back scattering X-ray reducing paints
RU-GOST R
- GOST R 50708-1994 Wire. Reverse torsion test
- GOST 18986.9-1973 Semiconductor diodes. Method for measuring pulse direct voltage and forword recovery time
TH-TISI
- TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]
- TIS 2176-2004 Torsion test for metallic wire [iso title: metallic materials.wire.simple torsion test]
U.S. Military Regulations and Norms
- ARMY A-A-50037 B-1993 GRIDDLES, SELF HEATING, GAS, COUNTER OR STAND MOUNTED
The American Road & Transportation Builders Association
- AASHTO T 257-96(R2018) Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices
- AASHTO TP 111-2014 Standard Method of Test for Measuring Retroreflectivity of Pavement Marking Materials Using a Mobile Retroreflectivity Unit
International Organization for Standardization (ISO)
- ISO 144:1973 Steel - Reverse bend testing of wire
- ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
- ISO 9649:2023 Metallic materials — Wire — Reverse torsion test
- ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
- ISO/CD 7801 Metallic materials — Wire — Reverse bend test
- ISO 5413:1976 Machine tools — Positive drive of Morse tapers
- ISO 2625:1973 Copper and copper alloys — Reverse bend testing of wire
AASHTO - American Association of State Highway and Transportation Officials
- T 257-1996 Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices
- TP 111-2014 Standard Method of Test for Measuring Retroreflectivity of Pavement Marking Materials Using a Mobile Retroreflectivity Unit
- T257-1986 Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices (Eighteenth Edition)
- T257-1996 Standard Method of Test for Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices (Twentieth Edition)
- DIVISION I 10.60-1996 Orthotropic Superstructures (Interim 2000)
Spanish Association for Standardization (UNE)
- UNE 48060:1982 45-DEGREE, 0-DEGREE DIRECTIONAL REFLECTANTE (DAYLIGHT)
- UNE 7469:1999 METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
- UNE 7469:2003 ERRATUM METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
AIA/NAS - Aerospace Industries Association of America Inc.
- NASM23964-2000 Bolt@ Self-Retaining@ Positive Locking
- NASM23964-2011 BOLT@ SELF-RETAINING@ POSITIVE LOCKING (Rev 1)
GSO
- GSO IEC/TR 62316:2014 Guidance for the interpretation of OTDR backscattering traces
- BH GSO ISO 18516:2016 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Determination of lateral resolution
- GSO ISO 18516:2013 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Determination of lateral resolution
- OS GSO ISO 18516:2013 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Determination of lateral resolution
- OS GSO IEC/TR 62316:2014 Guidance for the interpretation of OTDR backscattering traces
- OS GSO ISO 5413:2016 Machine tools -- Positive drive of Morse tapers
- GSO ISO 5413:2016 Machine tools -- Positive drive of Morse tapers
- GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
- OS GSO ISO 9649:2015 Metallic materials -- Wire -- Reverse torsion test
- OS GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
- GSO ISO 9649:2015 Metallic materials -- Wire -- Reverse torsion test
- BH GSO ISO 9649:2016 Metallic materials -- Wire -- Reverse torsion test
- GSO ISO 3859:2015 Inverse dovetail cutters and dovetail cutters with cylindrical shanks
- OS GSO ISO 3859:2015 Inverse dovetail cutters and dovetail cutters with cylindrical shanks
American National Standards Institute (ANSI)
- ANSI/NSF 58(i50)-2008 Reverse osmosis drinking water treatment systems
- ANSI C78.379-2006 Electric Lamps – Classification of the Beam Patterns of Reflector Lamps
RO-ASRO
- STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test
- STAS 1177-1974 Tests of metals REVERSE BEND TESTING OF STEEL WIRES
- STAS 10274/1-1983 Solid fuels ASH ANALYSIS General directions for spectral and chemical analysis carrying out
Danish Standards Foundation
- DS/IEC/TR 62316:2007 Guidance for the interpretation of OTDR backscattering traces
NATO - North Atlantic Treaty Organization
- STANAG 1041-1997 Anti-Submarine Evasive Steering - ATP-3(B) (ED 14)
- STANAG 1041-1998 Anti-Submarine Evasive Steering - ATP-3(B) (ED 15)
Indonesia Standards
- SNI 07-4611-1998 Reverse bend test for metallic material wires
- SNI 07-3807-1995 Reverse bend test method for butt-welded joints
South African Bureau of Standard
- SANS 7801:2003 Metallic materials - Wire - Reverse bend test
- SANS 62316:2007 Guidance for the interpretation of OTDR backscattering traces
IEEE - The Institute of Electrical and Electronics Engineers@ Inc.
- IEEE 173-1959 Standards on Navigation Aids: Direction Finder Measurements (Correction)
Aerospace Industries Association
- AIA NASM23964-2000 Bolt, Self-Retaining, Positive Locking FSC 5306
International Electrotechnical Commission (IEC)
- IEC PAS 62129:2004 Calibration of optical spectrum analyzers
IT-UNI
- UNI 7671-1977 Head-to-head welding casing made of iron and nickel alloy materials. Front and back transverse bending tests
- UNI 7672-1977 Head-to-head welding joints of ferrous materials and nickel alloys. Longitudinal bending test on front and back
NZ-SNZ
- NZS 5441.1:1987 Lighting and Retroreflectors for Pedal Cycles Part 1: Specification for Lamp Units and Retroreflectors Suitable for Fitting to Pedal Cycles
Defense Logistics Agency
- DLA MS51606 REV C VALID NOTICE 1-1996 PIN, GROOVED, HEADLESS (HALF LENGTH REVERSE TAPER GROOVE) CORROSION RESISTANT STEEL
- DLA A-A-51166 C-2005 FILES, ROTARY, INVERTED CONE SHAPE, HIGH SPEED STEEL OR TUNGSTEN CARBIDE
- DLA MS51606 REV C-1989 PIN, GROOVED, HEADLESS (HALF LENGTH REVERSE TAPER GROOVE) CORROSION RESISTANT STEEL
AGMA - American Gear Manufacturers Association
- 11FTM06-2011 Reversed Gear Tooth Bending Stress and Life Evaluation
IFI/FASTNR - Industrial Fastener Institute
- 134-2015 Structural Positive Locking@ Self-Plugging Blind Rivets
- 134-2012 Structural Positive Locking@ Self-Plugging Blind Rivets
Aerospace Industries Association/ANSI Aerospace Standards
- AIA/NAS NASM23964-2011 BOLT, SELF-RETAINING, POSITIVE LOCKING (Rev 1)
American Gear Manufacturers Association
- AGMA 11FTM06-2011 Reversed Gear Tooth Bending Stress and Life Evaluation
Forward Liquid Chromatography,How to analyze forward mass spectrometry,reverse photoelectron spectroscopy,reverse photoelectron spectroscopy,Forward Spectrum and Reverse Spectrum,Forward Spectrum Reverse Spectrum,Forward Spectrum Reverse Spectrum,Forward Spectrum and Reverse Spectrum,Forward Spectrum + Reverse Spectrum,Reversed High Performance Liquid Chromatography Tandem Mass Spectrometry,reverse c8 column,Inverse liquid chromatography mass spectrometry,Reversed High Performance Liquid Mass Spectrometry and High Performance Liquid Mass Spectrometry