Rubber Product Analysis

Rubber Product Analysis, Total:180 items.

The international standard classification for "Rubber Product Analysis" includes: Rubber , Rubber and plastics products , food products in general .

The Chinese standard classification for "Rubber Product Analysis" includes: Rubber products in general , Food sanitation , Farming and foresting machinery and tools .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14837-1993 and rubber products - Determination of composition by thermogravimetry
GB/T 7766-2008 Rubber products-Test methods for chemical analysis
GB/T 14837.1-2014 Rubber and rubber products―Determination of the composition of vulcanizates and uncured compounds by thermogravimetry―Part 1:Butadiene,ethylene-propylene copolymer and terpolymer,isobutene-isoprene,isoprene and styrene-butadiene rubbers
GB/T 14836-1993 Vulcanized rubber. Qualitative analysis of ash
GB/T 14837.2-2014 Rubber and rubber products―Determination of the composition of vulcanizates and uncured compounds by thermogravimetry―Part 2:Acrylonitrile-butadiene and halobutyl rubbers
GB/T 5009.64-2003 Method for analysis of hygienic standard of rubber sheet (ring) for food use

海关总署

SN/T 5269-2019 Determination of total polymer content in chloroprene rubber bythermogravimetry
SN/T 5268-2019 Determination of total polymer content in chloroprene rubber bythermogravimetry
SN/T 5271-2019 Rubber and rubber products - Fluorocarbon rubbers - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry

Taiwan Provincial Standard of the People's Republic of China

CNS 3573-1973 Chemical Analysis Rubber Hydrocarbon of Natural Rubber
CNS 3570-1973 Chemical Analysis of Natural Rubber (Iron)
CNS 3568-1973 Chemical Analysis of Copper in Natural Rubber
CNS 3565-1973 Chemical Analysis of Volatile Matter in Natural Rubber
CNS 3567-1973 Chemical Analysis of Ash Content in Natural Rubber
CNS 3572-1973 Chemical Analysis of Natural Rubber (Nitrogen)
CNS 3566-1973 Chemical Analysis of Dirt Matter in Natural Rubber
CNS 3569-1973 Chemical Analysis of Natural Rubber (Manganese)

Group Standards of the People's Republic of China

T/QYLH 0014-2024 Analysis method for cadmium content in rubber products

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 14837.3-2018 Rubber and rubber products—Determination of the composition of vulcanizates and uncured compounds by thermogravimetry—Part 3:Hydrocarbon rubbers,halogenated rubbers and polysiloxane rubbers after extraction

未注明发布机构

MIL-HDBK-695-2017 RUBBER PRODUCTS: RECOMMENDED SHELF LIFE

工业和信息化部

HG/T 2887-2018 Rubber sealing products for transformer products

Professional Standard - Chemical Industry

HG/T 2739-1995 Product quality classification of rubber and plastic tensile testing machine

Professional Standard - Machinery

JB/T 56073.15-1999 Quality grading of silicone rubber fiberglass hose products
JB/T 53118-1999 Product quality classification of rubber and plastic pressurized kneader

Professional Standard - Agriculture

NY/T 408-2000 Quality classification of machinery products for primary processing of natural rubber

Korean Agency for Technology and Standards (KATS)

KS M 6519-2008 Method of analysis for rubber goods
KS M 6519-2018 Method of analysis for rubber goods
KS M 6519-2001 Method of analysis for rubber goods
KS M 6519-1981 Method of analysis for rubber goods
KS M 6519-2023 Method of analysis for rubber goods
KS M ISO 2230:2012 Rubber products-Guidelines for storage
KS M ISO 3302-1:2008 Rubber－Tolerances for products－Part 1：Dimensional tolerances
KS M ISO 19004:2007 Rubber and rubber products－Determination of the sensitivity of test methods
KS M ISO 3302-2:2018 Rubber — Tolerances for products — Part 2: Geometrical tolerances
KS M ISO 3302-1-2023 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-2-2023 Rubber — Tolerances for products — Part 2: Geometrical tolerances
KS M ISO 3302-1:2018 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-2:2008 Rubber－Tolerances for products－Part 2：Geometrical tolerances
KS M ISO TR 11340:2003 Rubber and rubber products－Hydraulic hoes assemblies－External leakage classification for hydraulic systems
KS M 6600-1984 Analytical methods for raw natural rubber
KS M 6600-2009 Analytical methods for raw natural rubber
KS M ISO 15672-2022 Rubber and rubber additives－Determination of total nitrogen content using an automatic analyser
KS M 6720-1986 Testing methods of hygienic safety for rubber goods
KS M 6720-2008 Testing methods of hygienic safety for rubber goods
KS M ISO 15671-2022 Rubber and rubber additives－Determination of total sulfur content using an automatic analyser
KS M 6600-2020 Analytical methods for raw natural rubber
KS M 6520-1997 CHEMICAL ANALYSIS OF SYNTHETIC RUBBER SBR
KS M ISO 15671:2007 Rubber and rubber additives－Determination of total sulfur content using an automatic analyser
KS M ISO 15671-2007(2017) Rubber and rubber additives－Determination of total sulfur content using an automatic analyser
KS M ISO 15672-2007(2017) Rubber and rubber additives－Determination of total nitrogen content using an automatic analyser
KS M ISO 15672:2007 Rubber and rubber additives－Determination of total nitrogen content using an automatic analyser

KR-KS

KS M 6519-2018(2023) Method of analysis for rubber goods
KS M ISO 3302-2-2018 Rubber — Tolerances for products — Part 2: Geometrical tolerances
KS M ISO 3302-1-2018 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-2-2018(2023) Rubber — Tolerances for products — Part 2: Geometrical tolerances
KS M ISO 3302-1-2018(2023) Rubber — Tolerances for products — Part 1: Dimensional tolerances

British Standards Institution (BSI)

BS ISO 9924-3:2009 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction
BS ISO 15671:2023 Rubber and rubber products. Determination of total sulfur content using an automatic analyser
BS ISO 9924-3:2024 Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers
19/30381640 DC BS ISO 15671. Rubber and rubber products. Determination of total sulfur content using an automatic analyser
BS ISO 2230:2002 Rubber products - Guidelines for storage
BS 5923-2:1980 Methods for chemical analysis of rubber - EDTA titrimetric method for determination of zinc content of rubber products
23/30446931 DC BS ISO 9924-3. Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 3. Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction
BS ISO 3302-1:2014 Rubber. Tolerances for products. Dimensional tolerances
BS ISO 9924-2:2016 Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Acrylonitrile-butadiene and halobutyl rubbers
BS 3734-1:1997 Rubber. Tolerances for products. Dimensional tolerances
PD ISO/TS 16095:2021 Reclaimed rubber derived from products containing mainly natural rubber. Evaluation procedure
BS ISO 247-2:2018 Rubber. Determination of ash. Thermogravimetric analysis (TGA)

Japanese Industrial Standards Committee (JISC)

JIS K 6350:1976 Method of analysis for rubber goods
JIS K 6226-2:2003 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 2: Acrylonitrile-butadiene and halobutyl rubbers

YU-JUS

JUS G.Z1.020-1989 Rubber products. Classification and designation of waste rubbers
JUS G.C6.041-1977 Rubber products. Testing of rubber hidrauKc hoses
JUS G.F1.101-1987 Ruber products. Requirements for rubber surgical gloves

AT-ON

ONORM C 9410 Teil.1-1980 Rubber products; dimensional tolerances; ebonite products
ONORM C 9410-2-1994 Rubber products - Dimensional tolerances - Moulded rubber (elastomeric) products
ONORM C 9410-3-1994 Rubber products - Dimensional tolerances - Extruded rubber (elastomeric) products
ONORM C 9410-5-1994 Rubber products - Dimensional tolerances - Soft rubber sheets and products made from sheets (elastomers)

PL-PKN

PN BN 6614-04-1963 Rubber products "Aida" model rubber balls
PN BN 6614-07-1963 Rubber products. Rubber ball with hard tube
PN C04213-1974 Rubber Preparation of samples for chemical analysis
PN C94126-1966 Schedule of tolerances for products in rubber and ebonite
PN BN 6633-04-1962 Rubber products. square sponge
PN BN 6633-05-1963 Rubber products. Multi-space board. poligum
PN BN 6118-10-1963 Chlorinated rubber product thinner
PN BN 6614-05-1963 rubber products. sanitary rubber mat

Society of Automotive Engineers (SAE)

SAE AMS2279B-2011 Tolerances, Rubber Products
SAE AMS2279A-1993 Tolerances Rubber Products
SAE AMS2279A-1993(R2004) Tolerances Rubber Products
SAE AMS-R-3065-2000 Rubber, Fabricated Products

TH-TISI

TIS 333-2003 Carbon blacks used in rubber products

RO-ASRO

STAS 9440-1973 TECHNICAL EBONITE PRODUCTS
STAS 5994-1986 Rubber protective Footwear RUBBER BOOTS RESISTANT TO PETROLEUM PRODUCTS
STAS 11448-1980 RUBBER 3ABY'S DUMMIES Analysis methods
STAS 5068/2-1977 Tcchnical ruhber prodncts for petrolcum equipment RUBBER DISC TYPE GASKETS FOR D TYPE SWAB

South African Bureau of Standard

SANS 6446:2005 Rubber products - Bridge bearings - Specification for rubber materials
SANS 3302-2:2003 Rubber - Tolerances for products Part 2: Geometrical tolerances
SANS 3302-1:2003 Rubber - Tolerances for products Part 1: Dimensional tolerances

RU-GOST R

GOST ISO 6446-2016 Rubber products. Bridge bearings. Technical requirements for rubber

CZ-CSN

CSN 62 1108-1983 Chemical analysis of rubber. Preparing of rubber specimen
CSN 63 0001 Z2-1999 rubber products. Storage and inspection of raw rubber and rubber products
CSN ISO 3302:1993 Rubber. Dimensional tolerances for use with products

American Society for Testing and Materials (ASTM)

ASTM D5712-99 Standard Test Method for the Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method
ASTM RR-D11-1000 1973 D0297-Test Methods for Rubber Products—Chemical Analysis
ASTM D297-93(1998) Standard Test Methods for Rubber Products-Chemical Analysis
ASTM D297-15 Standard Test Methods for Rubber Products&x2014Chemical Analysis
ASTM D297-93(2006) Standard Test Methods for Rubber Products-Chemical Analysis
ASTM D297-21 Standard Test Methods for Rubber Products—Chemical Analysis
ASTM D5461-02 Standard Test Method for Rubber Additives—Wet Sieve Analysis of Powdered Rubber Chemicals
ASTM D297-15(2019) Standard Test Methods for Rubber Products—Chemical Analysis
ASTM D1765-14 Standard Classification System for Carbon Blacks Used in Rubber Products
ASTM D1764-97 Standard Specification for Rubber Latex Products for Automotive Applications
ASTM D4572-89(1999) Standard Test Method for Rubber Chemicals-Wet Sieve Analysis of Sulfur
ASTM RR-D11-1089 1999 D6370-Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM D4572-21 Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur
ASTM D4572-89(2017) Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur

IN-BIS

IS 1741-1960 Latex Foam Rubber Product Specification

General Motors Corporation (GM)

GM 9985950-1993 Adhesive, Contact, Rubber, Weatherstrip

Defense Logistics Agency

DLA MIL-STD-190 C REINST NOTICE 2-2003 IDENTIFICATION MARKING OF RUBBER PRODUCTS
DLA MIL-STD-190 C-1977 IDENTIFICATION MARKING OF RUBBER PRODUCTS

ZA-SANS

CKS 461-1976 Vulcanized rubber products

HU-MSZT

MSZ 18842-1954 Aviation Technology Rubber Products

International Organization for Standardization (ISO)

ISO 2230:2002 Rubber products - Guidelines for storage
ISO 9924-3:2009 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction
ISO 19004:2004 Rubber and rubber products - Determination of the sensitivity of test methods
ISO 3302-2:1998 Rubber - Tolerances for products - Part 2: Geometrical tolerances
ISO 3302-2:2022 Rubber — Tolerances for products — Part 2: Geometrical tolerances
ISO 3302-1:1996 Rubber - Tolerances for products - Part 1: Dimensional tolerances
ISO 3302-2:2008 Rubber - Tolerances for products - Part 2: Geometrical tolerances
ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
ISO 15671:2023 Rubber and rubber products — Determination of total sulfur content using an automatic analyser
ISO 15671:2000 Rubber and rubber additives - Determination of total sulfur content using an automatic analyser
ISO 9924-2:2016 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers
ISO 15672:2000 Rubber and rubber additives - Determination of total nitrogen content using an automatic analyser

German Institute for Standardization

DIN 7715-5:1979-11 Rubber products; dimensional tolerances, rubber sheets and products made from sheets
DIN 7715-40:1998 Rubber products - Dimmensional tolerances; hoses
DIN ISO 3302-1:2018 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DIN ISO 3302-1 E:2016-10 Rubber - Tolerances for products - Part 1: Dimensional tolerances

CU-NC

NC 31-07-1986 Rubber and Rubber Derivatives. Tire Tubes. Testing Methods
NC 31-04-1984 Rubber and Rubber Derivatives.Diagonal Types for Transportation uality Specifications

Association Francaise de Normalisation

NF T46-022:1970 Rubber and similar elastomers. Storage conditions for vulcanized rubber based products.
NF EN 1765:2016 Flexibles en caoutchouc pour chargement et déchargement des produits pétroliers - Spécifications pour les flexibles
NF T40-027:2006 Rubber and rubber products - Determination of the sensitivity of test methods.
NF T46-047:2002 Rubber and rubber products - Determination of composition of vulcanizates and uncured compounds by thermogravimetry.
NF T46-047:2014 Rubber and rubber products - Determination of composition of vulcanizates and uncured compounds by thermogravimetry
NF T47-001:1971 Tolerances applicables to moulded and extruded products of rubber or ebonite.
NF T47-001-2*NF ISO 3302-2:2014 Rubber - Tolerances for products - Part 2 : geometrical tolerances
NF T47-001-1*NF ISO 3302-1:2014 Rubber - Tolerances for products - Part 1 : dimensional tolerances
NF ISO 3302-1:2014 Caoutchouc - Tolérances pour produits - Partie 1 : tolérances dimensionnelles
NF T46-048:1984 Rubber vulcanized or thermoplastic. Determination of dimensions of test pieces and products for test purposes.

SCC

MIL MIL-HDBK-695F-2017 Rubber Products: Recommended Shelf Life
MIL MIL-HDBK-695E-2011 Rubber Products: Recommended Shelf Life
BS 1673-2:1967 Methods of test for raw rubber and unvulcanized compounded rubber-Chemical analysis of raw natural rubber
BS ISO 9924-2:2000 Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Acrylonitrile-butadiene and halobutyl rubbers
DANSK DS/ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
NS 921:1968 Plastic pipes and pipe parts — Pipes made of polyethylene materials (PE) — Qualitative requirements for PEL pipes and PEH pipes
ASTM D2000-06e1 Standard Classification System for Rubber Products in Automotive Applications
BS 3263:1960 Specification for rubber closures for injectable products

United States Navy

NAVY MIL-STD-177 A-1969 RUBBER PRODUCTS, TERMS FOR VISIBLE DEFECTS OF
NAVY MIL-STD-177 A VALID NOTICE 1-1988 RUBBER PRODUCTS, TERMS FOR VISIBLE DEFECTS OF

GSO

OS GSO ISO 3302-1:2015 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
BH GSO ISO 3302-1:2016 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
BH GSO ASTM D1765:2022 Standard Classification System for Carbon Blacks Used in Rubber Products
OS GSO ISO 3302-2:2015 Rubber -- Tolerances for products -- Part 2: Geometrical tolerances
GSO ISO 3302-2:2015 Rubber -- Tolerances for products -- Part 2: Geometrical tolerances
BH GSO ISO 3302-2:2016 Rubber -- Tolerances for products -- Part 2: Geometrical tolerances
GSO ISO 3302-1:2015 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
GSO ASTM D1765:2021 Standard Classification System for Carbon Blacks Used in Rubber Products
OS GSO ISO 9924-2:2014 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers .
GSO ISO 15671:2015 Rubber and rubber additives -- Determination of total sulfur content using an automatic analyser
OS GSO ISO/TS 16095:2015 Reclaimed rubber derived from products containing mainly natural rubber -- Evaluation procedure
OS GSO ISO 15672:2015 Rubber and rubber additives -- Determination of total nitrogen content using an automatic analyser
GSO ISO 15672:2015 Rubber and rubber additives -- Determination of total nitrogen content using an automatic analyser
OS GSO ISO 15671:2015 Rubber and rubber additives -- Determination of total sulfur content using an automatic analyser

Danish Standards Foundation

DS/ISO 3302-1:2011 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DS/ISO 3302-1/Amd. 1:2011 Rubber - Tolerances for products - Part 1: Dimensional tolerances