high concentration concentration

high concentration concentration, Total:155 items.

The international standard classification for "high concentration concentration" includes: Occupational safety. Industrial hygiene , Alcoholic beverages , Pulps , Ambient atmospheres , Shipbuilding and marine structures in general , Laboratory medicine , Installations in buildings , Fuels in general , Geology. Meteorology. Hydrology .

The Chinese standard classification for "high concentration concentration" includes: Hygiene, safety and labor protection , Mechanics Measurement , Distilled liquors , Compartment auxiliary machine , Papermaking in general , Environmental Quality Standard for atmosphere, water and soil , Paper pulp and paperboard , Medical laboratory equipment , Gas supply engineering , Industrial dust and gas prevention technology , Coal analysis methods , Meteorology .

Professional Standard - Ferrous Metallurgy

YB 5002-1987 High Concentration Pinitol Oil

Taiwan Provincial Standard of the People's Republic of China

CNS 8458-1982 Method of Test for Oxygen Indicator and Oxygen Alarm
CNS 8457-1982 Oxygen Indicator and Oxygen Alum
CNS 10863-1994 Method of Test for Consistency of Pulp Suspensions

Military Standard of the People's Republic of China-General Armament Department

GJB 6369-2008 Operating requirement of high concentration hydrogen peroxide
GJB 6370-2008 Specification for high concentration hydrogen peroxide

National Metrological Verification Regulations of the People's Republic of China

JJG 1133-2017 High-Low Concentration Methane Transmitters for Coal Mine
JJG 846-2015 Verification Regulation of Dust Concentration Measuring Instruments

Professional Standard-Safe Production

AQ/T 6206-2006 High and low concentration methane sensor for coal mine
AQ 6206-2006 Coal mine high-low concentration methane transducer
AQ 6204-2006 Thermal-conduction high concentration methane transducer for gas drainage
AQ/T 6204-2006 Thermal Conductivity High Concentration Methane Sensor for Gas Drainage

工业和信息化部

YB/T 4794-2019 Technical specification for high concentration operation of iron tailings
HG/T 6000-2022 Electromagnetic acid-base concentration meter

Professional Standard - Petroleum

SY/T 5885-1993 High concentration hydrochloric acid corrosion inhibitor CT1-3 for acidification

National Metrological Technical Specifications of the People's Republic of China

JJF 1074-2001 Measurement Tables for Density - Concentration of Alcohal
JJF 1074-2018 Measurement Tables for Density-Concentration of Alcohal

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6921-1986 Determination of the concentration of airborne particulate matters
GB/T 11859.1-1989 Strong aromatic chinese spirits of low concentration
GB/T 5399-1985 Pulp--Determination of stock concentration--Rapid method
GB 8240-1987 Marine oil content meter
GB/T 5399-2004 Pulps—Determination of stock concentration

Professional Standard-Ships

CB/T 1033-1999 Marine oil content meter

国家药监局

YY/T 1726-2020 Agar diffusion and dilution susceptibility test strip

Group Standards of the People's Republic of China

T/CEMIA 036-2023 High alkali concentration negative photoresist developer for semiconductor display
T/QGCML 2265-2023 Pressure swing adsorption system for compressed natural gas produced by concentrating low-concentration coalbed methane
T/QGCML 2269-2023 Low-concentration coalbed methane enrichment to compressed natural gas automation system
T/QGCML 2268-2023 Low-concentration coalbed methane enrichment and compressed natural gas compression system
T/ZJFIA 006-2021 Nong gao tang
T/CIECCPA 025-2023 Two-stage pressure swing adsorption concentrator for low-pressure and low-concentration carbon dioxide
T/QGCML 2267-2023 Low-concentration coalbed methane concentration to produce compressed natural gas compression and purification system
T/QGCML 2266-2023 Low-concentration coalbed methane concentration to produce compressed natural gas cooling tower system
T/SDFIA 012-2020 Langyatai Super High Luzhou-flavor Liquor Production Technical Specifications
T/ZZB 1055-2019 High concentration tetramethyl ammonium hydroxide for flat panel displays production
T/QGCML 2004-2023 Technical regulations for efficient utilization of low-concentration gas in coal mines
T/CIECCPA 024-2023 Two-stage pressure swing adsorption concentrator for low-pressure and low-concentration carbon dioxide

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3595-2022 Level of Ground Ozone Concentration

Professional Standard - Urban Construction

CJ/T 524-2018 Gas odorant concentration monitor

国家煤矿安全监察局

MT 79-1984 Determination Method for Dust Concentration and Dispersity

Henan Provincial Standard of the People's Republic of China

DB4109/T 055-2024 Technical Specifications for Comprehensive Intensity Level of Heavy Fog on Highways

Professional Standard - Coal

MT/T 721-1997 Thermal Conductivity High Concentration Methane Sensor for Gas Drainage

国家煤炭工业局

MT/T 792-1998 Determination of the concentration of coal water mixture

Professional Standard - Meteorology

QX/T 76-2007 Monitoring of Visibility and Warning of Heavy Fog on Highway

Professional Standard - Traffic

JT/T 2014-1990 Method for Determination of Port Dust Concentration

UNKNOWN

YB 5002-87 Highly concentrated pine alcohol oil

GSO

OS GSO 1898:2009 Flowable concentration - water suspension concentration
GSO ISO 13271:2015 Stationary source emissions -- Determination of PM10/PM2,5 mass concentration in flue gas -- Measurement at higher concentrations by use of virtual impactors
OS GSO ISO 13271:2015 Stationary source emissions -- Determination of PM10/PM2,5 mass concentration in flue gas -- Measurement at higher concentrations by use of virtual impactors
BH GSO ISO 13271:2017 Stationary source emissions -- Determination of PM10/PM2,5 mass concentration in flue gas -- Measurement at higher concentrations by use of virtual impactors
GSO ISO 125:2015 Natural rubber latex concentrate -- Determination of alkalinity
GSO ISO 4119:2015 Pulps -- Determination of stock concentration
OS GSO ISO 4119:2015 Pulps -- Determination of stock concentration
BH GSO ISO 4119:2016 Pulps -- Determination of stock concentration

RU-GOST R

GOST R 50632-1993 High-strength hydrogen peroxide. Specifications
GOST R ISO 13271-2016 Stationary source emissions. Determination of PM/PM mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
GOST 25645.136-1986 Solar wind. Composition, particle concentration and velocity
GOST 15113.5-1977 Food concentrates. Methods for determination of acidity
GOST 18294-1989 Drinking water. Method for determination of berillium mass concentration
GOST 18294-2004 Drinking water. Method for determination of beryllium content

International Organization for Standardization (ISO)

ISO 10980:1995 Validation of the strength of reference solutions used for measuring concentrations
ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
ISO 4119:1995 Pulps - Determination of stock concentration
ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
ISO 13271:2012/CD Amd 1:2011 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors — Amendment 1

U.S. Military Regulations and Norms

ARMY MIL-A-46186-1984 ARMOR PLATE, STEEL, WROUGHT, HIGH-STRENGTH, HIGH-QUALITY
ARMY MIL-DTL-46193 A-1998 ARMOR PLATE, CONTROL ROLLED, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY
ARMY MIL-DTL-46035 C VALID NOTICE 1-2004 TITANIUM ALLOY: HIGH STRENGTH, WROUGHT (FOR CRITICAL COMPONENTS)
ARMY MIL-DTL-46035 C-1999 TITANIUM ALLOY: HIGH STRENGTH, WROUGHT (FOR CRITICAL COMPONENTS)
ARMY MIL-S-13281 E-1985 STEEL, CARBON, ALLOY, AND HIGH STRENGTH LOW ALLOY FOR WELDED STRUCTURES (STRESS RELIEVED)
ARMY MIL-S-13281 E REINST NOTICE 2-1998 STEEL, CARBON, ALLOY, AND HIGH STRENGTH LOW ALLOY FOR WELDED STRUCTURES (STRESS RELIEVED)

Korean Agency for Technology and Standards (KATS)

KS A ISO 10980:2012 Validation of the strength of reference solutions used for measuring concentrations
KS M 1108-2017(2022) Bleaching powder and high test hypochlorite
KS I ISO 13271-2014(2019) Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS M 0107-1993 Testing methods for concentration of fine particles in highly purified water
KS I 3213-2009(2019) Testing methods for concentration of fine particles in highly purified water
KS I 3213-2019 Testing methods for concentration of fine particles in highly purified water
KS P 6124-2006 Oxygen analyzers for medical use
KS I ISO 13271:2014 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS I ISO 13271-2019 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS M ISO 4119:2021 Pulps — Determination of stock concentration
KS M ISO 4119:2006 Pulps-Determination of stock concentration
KS M ISO 4119:2016 Pulps－Determination of stock concentration
KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS M ISO 125:2015 Natural rubber latex concentrate－Determination of alkalinity
KS I ISO 12141:2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method

US-FCR

FCR FED H-08-4 VOL 2 235-1984 CONC. WHEEL STOPS
FCR FED H-08-4 VOL 2 240-1984 CONC. PEDESTRIAN PAVEMENT

Japanese Industrial Standards Committee (JISC)

JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
JIS L 0808:1994 Standard depths of colour
JIS L 0810:1973 Standard depths of shade no.3
JIS L 0812:1973 Standard depths of shade no.5
JIS P 8225:2003 Pulps -- Determination of stock concentration

SCC

BS 3715:1964 Specification for concentration gradient density columns
DANSK DS/ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
AWWA JAW34110 Journal AWWA — Technical Note: Comparing Predicted and Observed Concentrations of DBPs
HOLDEN HN 1427-2001 Corrosion Preventative - Medium Bodied
AWWA QTC97060 A National Compilation of Low Level Turbidity Data
AWWA MTC57651 Using MF and UF Systems for High Concentration Iron and Manganese Removal
11/30204376 DC BS ISO 13271. Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
AWWA JAW34118 Journal AWWA — An Analysis of Low-Level Turbidity Measurements
AWWA ACE99322 Health Effects From Exposure to High Levels of Sulfate in Drinking Water
DANSK DS/EN ISO 4119:1996 Pulps - Determination of stock concentration
VDI 2310 BLATT 12-2004 Maximum emission values for the protection of humans — Maximum emission concentrations for nitrogen dioxide
AENOR UNE-EN ISO 4589-3:2017 Plastics. Determination of fire behavior using the oxygen index. Part 3: Test at elevated temperature. (ISO 4589-3:2017).

HU-MSZT

MSZ 3702-1981 Milk concentration detection
MSZ 14640-1971 70% concentration of chromic acid for analysis
MSZ MI 19387-1978 Tritium concentration detection in surface water

Standard Association of Australia （SAA）

AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
AS 4215.2:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations
AS 2917.1:1994 Copper sulfide concentrates - Determination of copper content - Titrimetric methods

CH-SNV

VSM 37501-1961 grease. Concentration, penetration1)
VSM 33936-1974 test. Concentration limits

TN-INNORPI

NT 14.29-1983 Determine milk concentration

Canadian General Standards Board （CGSB)

CGSB 1-GP-71 METH 4.7-1974 Methods of Testing Paints and Pigments Consistency Consistency of Putty by Means of Gardner Mobilometer

BR-ABNT

ABNT MB-137R-1954 Ammonium hydroxide concentration and density

AENOR

UNE 30148:1960 ANALYSIS REAGENTS. PERCHLORIC ACID (SOLUTION TO 70%).
UNE 40261-4:1975 THRESHOLD OF CONFIDENCE OF THE CONCENTRATION VALUES.

Society of Automotive Engineers (SAE)

SAE AMS3310-1997 Rubber, Silicone - Flame Retardant, Low Smoke Density, High Strength 65 - 75 Durometer Color White

Association Francaise de Normalisation

NF ISO 13271:2012 Emissions from stationary sources - Determination of the mass concentration of PM10/PM2.5 in gaseous effluents - Measurement at high concentrations using virtual impactors
NF X43-342*NF ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors.
NF ISO 10980:1998 Verification of the title of the reference solutions used for measuring concentrations
NF Q50-006*NF EN ISO 4119:1996 Pulps. Determination of stock concentration.
NF EN ISO 4119:1996 Pastes - Determination of pulp concentration
NF V05-001:1959 Food products. Vinegar. Determination of acetic acid concentration.

CZ-CSN

CSN 68 4153-1989 Concentration of the impurities by he extraction method

CU-NC

NC 44-12-12-1985 Ores. Copper Conoentrates Photometric Deterraination of Arsenic
NC 23-02-1968 Evaluation of sulphuric acid concentration by measurement of density
NC 10-72-1988 Metallurgy. Determination of Compression Strength. Testing Method

British Standards Institution (BSI)

BS 2742M:1960 Miniature smoke chart
BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
BS 2742C:1957 Ringelmann chart
BS EN ISO 4119:1996(1999) Pulps — Determination ofstock concentration
BS EN ISO 4119:1996 Pulps. Determination of stock concentration
BS EN ISO 4119:1995 Pulps. Determination of stock concentration

API - American Petroleum Institute

API 4131-1971 EXPERIMENTAL HUMAN EXPOSURE to HIGH CONCENTRATIONS of CARBON MONOXIDE

German Institute for Standardization

DIN EN ISO 4119:1996 Pulps - Determination of stock concentration (ISO 4119:1995); German version EN ISO 4119:1996
DIN 10318:1995 Determination of the density of buttermilk serum

Danish Standards Foundation

DS/ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
DS/EN ISO 4119:1996 Pulps - Determination of stock concentration

CN-GJB-H

GJB 7121-2011 Specification for oxygen indicator

KR-KS

KS M ISO 4119-2021 Pulps — Determination of stock concentration
KS M ISO 4119-2016 Pulps－Determination of stock concentration
KS I ISO 12141-2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method

IPC - Association Connecting Electronics Industries

IPC TM-650 2.3.35.2-1995 Fluoride Concentration@ Fluxes - Quanitative
IPC TM-650 2.3.35.2A-2004 Fluoride Concentration@ Fluxes - Quanitative

General Motors Corporation (GM)

GM 9982217-1993 Sealer - High Bake, Low Density Sprayable PVC Revision B

Indonesia Standards

SNI ISO 4119:2014 Pulps - Determination of stock concentration

US-CFR-file

CFR 12-251.3-2014 Banks and banking. Part251:Concentration limit (Regulation XX). Section251.3:Concentration limit.

PL-PKN

PN P50094-1986 Pulps Determination of stock Nconcentration

American Society for Testing and Materials (ASTM)

ASTM D789-18 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions
ASTM D789-19 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions

VDI - Verein Deutscher Ingenieure

VDI 2310 Blatt 5-1978 Maximale Immissions-Werte zum Schutze der Vegetation - Maximale Immissions-Werte fuer Stickstoffdioxid

AT-ON

ONORM M 9405-1993 Determination of asbestos concentration in air Dosage des concentrations d'amiante dans l'air

YU-JUS

JUS H.B8.252-1983 Methanol for industnal use. Evaluation of methanol concentration by measurement of density