pressure face gauge
pressure face gauge, Total:139 items.
The international standard classification for "pressure face gauge" includes: Diagnostic, maintenance and test equipment , Transmissions, suspensions , Other standards related to road engineering , Geology. Meteorology. Hydrology , Mechanical testing .
The Chinese standard classification for "pressure face gauge" includes: Mechanics Measurement , Highway vehicle servicing installation , Transmission system , Operating equipment, instrument and meter , Oceanographic instrumentation , Deformeter, casting instrument and dynamic test instrument .
National Metrological Verification Regulations of the People's Republic of China
- JJG(交通) 020-1999 Verification Regulation of Steering Force Stering Angle Brake Pedal Force Tester's Aligner
- JJG(民航) 0078-2004 F80218-42 Force Transducer Control Wheel Steering Test Set
- JJG 946-1999 Verification Regulation of Pressure Tide Gauge
- JJG 113-2014 Single Wheel Lateral Force Coefficient Tester
- JJG(交通) 113-2014 Testing System of Single-wheel Sideway Force Coefficient
- JJG(机械) 101-1992 Interfacial Tensiometer Verification Regulations
- JJG(交通) 007-2005 Steering Force-Steeting Angle Tester of Motor Car
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
- GB/T 34592-2017 Steering force steering angle detector for steering wheel of automobile
国家铁路局
- TB/T 2489-2016 Track side test methods of vertical and lateral wheel-rail forces
Taiwan Provincial Standard of the People's Republic of China
- CNS 15046-2006 Method of test for measuring the longitudinal profile of traveled surfaces with an accelerometer established inertial profiling reference
National Metrological Technical Specifications of the People's Republic of China
- JJF 1196-2008 Calibration Specification of Motor Vehicle Testers for Steering Force and Steering Angle
- JJF(汽车) 07-2008 Calibration specification for steering force angle tester
- JJF 1464-2014 Calibration Specification for Interface Tensiometers
Jilin Provincial Standard of the People's Republic of China
- DB22/T 1715-2012 General technical specification for steering wheel steering force and steering angle detector
Professional Standard - Traffic
- JT/T 836-2012 Lever Pressure Instrument
- JT/T 921-2014 Testing System of Single-wheel Sideway Force Coefficient
Professional Standard - Aviation
- HB 939-2000 Radial pressure gauge clamp
- HB 940-2000 Axial pressure gauge clamp
Professional Standard - Ocean
- HY/T 090-2005 and tide recorder with pressure sensor
Professional Standard - Military and Civilian Products
- WJ/Z 25-1975 Horizontal spring jumping mold for optical instruments
Professional Standard - Machinery
- JB/T 9388-2002 Specifications for the interface tensiometers
- JB/T 8217.2-1999 B series pneumatic field mounted conreollers.Pressure instruments
- JB/T 9388-2015 Interface tensiometers-Technical specification
Professional Standard - Coal
- MT 121-1985 Pie Chart Pressure Recorder
Group Standards of the People's Republic of China
- T/ZZB 0325-2018 Electric hydraulic steering power pump
国家海洋局
- HY/T 046-1999 SCA2-2 pressure tide gauge
GB-REG
- REG NACA-WRL-258-1942 EFFECT OF NORMAL PRESSURE ON THE CRITICAL COMPRESSIVE STRESS OF CURVED SHEET
- REG NACA-ARR-L5B10-1945 Effect of normal pressure on the critical compressive and shear stress of curved sheet
National Aeronautics and Space Administration (NASA)
- NASA NACA-ARR-L5B10-1945 Effect of normal pressure on the critical compressive and shear stress of curved sheet
- NASA NACA-ARR-L6A05-1946 Charts for critical combinations of longitudinal and transverse direct stress for flat rectangular plates
Korean Agency for Technology and Standards (KATS)
- KS B ISO 4401-2013 Hydraulic fluid power－Four-port directional control valves－Mounting surfaces
- KS B ISO 4401-2003(2008) Hydraulic fluid power－Four-port directional control valves－Mounting surfaces
ESDU - Engineering Sciences Data Unit
- AERO A.S.06.03.04 B-1987 Spanwise centre of pressure of isolated lifting surface at supersonic speeds.
SCC
- AENOR UNE 20665:1989 Transverse track magnetoscopes.
- BS ISO 4401:1994 Hydraulic fluid power. Four-port directional control valves. Mounting surfaces
- BS 6494-1:1984 Hydraulic fluid power valve mounting surfaces-Specification for four-port directional control valves
- CAN/CGSB 43.31-M86-1986 Labels and label strips, pressure-adhesive
- HOLDEN HN 2384-2006 Hose - Power Steering Return - Low Pressure
- HOLDEN HN 2384-2013 Hose - Power Steering Return - Low Pressure
- NS-EN 16288-2:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 3 finish
- HOLDEN HN 2112-2013 Hose - Power Steering - High Temperature High Pressure
- NS-EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish
- DANSK DS/EN 16287-2:2014 Glass packaging – Screw finishes for pressure capsules – Part 2: One way glass MCA 1 finish
- DANSK DS/EN 16288-2:2014 Glass packaging – Screw finishes for pressure capsules – Part 2: One way glass MCA 3 finish
- HOLDEN HN 2112-2006 Hose - Power Steering - High Temperature High Pressure
- NS-EN 16287-2:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 1 finish
- DANSK DS/EN 16291-2:2013 Glass packaging – Screw finishes for pressure capsules – Part 2: One way glass MCA 2 finish
- DANSK DS/EN 16290-2:2014 Glass packaging – Screw finishes for pressure capsules – Part 2: One way glass MCA 7,5 R finish
GSO
- OS GSO ISO 4401:2015 Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces
- BH GSO ISO 4401:2016 Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces
- BH GSO 2449:2015 Digital Pressure gauge and recorder
- OS GSO 2449:2014 Digital Pressure gauge and recorder
AT-ON
- ONORM ISO 4401:1981 Hydraulic fluid power; four port directional control valves; mounting surfaces
- ONORM E 1364-1971 Apparatus for pressure lest on shrouds.
HU-MSZT
- MNOSZ 13981-1954 Pressure measuring instruments, low pressure measuring instruments, low pressure and pressure measuring instruments made of metal film
- MSZ KGST 780-1977 Surface currents of electrical instruments and equipment
- MSZ 9964-1951 Instrument parts. Double pressure outer center
British Standards Institution (BSI)
- BS ISO 4401:1996 Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
- BS ISO 4401:2005 Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
- BS EN 16291-2:2013(2014) Glass packaging — Screw finishes for pressure capsules Part 2 : One way glass MCA 2 finish
PL-PKN
- PN M73270-02-1991 Hydraulic fluid power Four-port directional control valves Mounting surfaces
- PN M42312-1987 Pressure measuring instruments erminology
- PN M42303-1988 Pressure gauges ixture ocks
GM Europe
- GME GMI L-9A-24-2007 Hydraulic Rack-and-Pinion Power Steering - Maximum Steering Pressure (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##), Global Delta d (34##) and S-4470/50. It is Superceded for all future projects and r
SAE - SAE International
- SAE ARP427-1958 Pressure Ratio Instruments
- SAE J2704-2018 Tire Normal Force/Deflection and Gross Footprint Dimension Test
- SAE J2704-2017 Tire Normal Force/Deflection and Gross Footprint Dimension Test
- SAE J2050-1993 High-Temperature Power Steering Pressure Hose@ Standard (February 1993)
- SAE J190-2007 Power Steering Pressure Hose - Wire Braid
- SAE J190-1970 Power Steering Pressure Hose - Wire Braid
- SAE AS397A-1958 Direction Instrument@ Non-Magnetic@ Stabilized Type (Directional Gyro)
- SAE AS408A-1954 Pressure Instruments - Fuel@ Oil and Hydraulic
- SAE AS411B-1993 Manifold Pressure Indicating Instruments
- SAE J191-1998 Power Steering Pressure Hose - Low Volumetric Expansion Type
- SAE AS408-1948 Pressure Instruments - Fuel@ Oil and Hydraulic
- SAE AS411A-1963 Manifold Pressure Indicating Instruments
- SAE J191-1970 Power Steering Pressure Hose - Low Volumetric Expansion Type
- SAE J191-1989 Power Steering Pressure Hose - Low Volumetric Expansion Type@ Standard
- SAE J189-1989 Power Steering Return Hose - Low Pressure (December 1989)
- SAE J189-1970 POWER STEERING RETURN HOSE - LOW PRESSURE
- SAE J189-1998 Power Steering Return Hose - Low Pressure
- SAE J188-1998 Power Steering Pressure Hose - High Volumetric Expansion Type
- SAE J188-1970 POWER STEERING PRESSURE HOSE - HIGH VOLUMETRIC EXPANSION TYPE
- SAE J188-1989 Power Steering Pressure Hose - High Volumetric Expansion Type (October 1989)
Society of Automotive Engineers (SAE)
- SAE ARP427A-2001 Pressure Ratio Instruments
- SAE AS8042-1985 MANIFOLD PRESSURE INSTRUMENTS
- SAE ARP427A-2008 Pressure Ratio Instruments
- SAE AS8042-2008 MANIFOLD PRESSURE INSTRUMENTS
- SAE ARP427-1991 PRESSURE RATIO INSTRUMENTS
- SAE J2704-2005 Tire Normal Force/Deflection and Gross Footprint Dimension Test
- SAE J2050-2012 High-Temperature Power Steering Pressure Hose
- SAE J2050-2015 High-Temperature Power Steering Pressure Hose
- SAE J2050-2001 High-Temperature Power Steering Pressure Hose
- SAE J2704-2010 Tire Normal Force/Deflection and Gross Footprint Dimension Test
- SAE J190-2012 Power Steering Pressure Hose - Wire Braid (Stabilized Type)
- SAE AS397A-2008 Direction Instrument, Non-Magnetic, Stabilized Type (Directional Gyro)
- SAE AS411-1948 MANIFOLD PRESSURE INDICATING INSTRUMENTS
- SAE AS411A-1993 MANIFOLD PRESSURE INDICATING INSTRUMENTS
- SAE AS411B-2008 Manifold Pressure Indicating Instruments
- SAE J191-2014 Power Steering Pressure Hose-Low Volumetric Expansion Type
- SAE J189-2003 Power Steering Return Hose - Low Pressure
- SAE AS397B-2012 Direction Instrument, Non-Magnetic, Stabilized Type (Directional Gyro)
- SAE J189-2012 Power Steering Return Hose Low Pressure
- SAE J188-2012 Power Steering Pressure Hose - High Volumetric Expansion Type (Stabilized Type)
- SAE J191-2003 Power Steering Pressure Hose - Low Volumetric Expansion Type
- SAE J190-1998 Power Steering Pressure Hose Wire Braid
- SAE J188-2003 Power Steering Pressure Hose - High Volumetric Expansion Type
- SAE AS411B-1963 Manifold Pressure Indicating Instruments
American National Standards Institute （ANSI)
- ANSI/SAE J2050-1993 High-Temperature Power Steering Pressure Hose
German Institute for Standardization
- DIN 16086:2006 Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets
- DIN 16086:2006-01 Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets
- DIN EN 16287-2:2014-07 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 1 finish; German version EN 16287-2:2014 / Note: To be replaced by DIN EN 17829 (2022-04).
- DIN EN 16291-2:2013-05 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish; German version EN 16291-2:2013 / Note: To be replaced by DIN EN 17829 (2022-04).
- DIN EN 16288-2:2014-07 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 3 finish; German version EN 16288-2:2014 / Note: To be replaced by DIN EN 17829 (2022-04).
- DIN EN 16290-2:2014-07 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 7,5 R finish; German version EN 16290-2:2014 / Note: To be replaced by DIN EN 17829 (2022-04).
General Motors Corporation (GM)
- GM 9985010-1994 Fluid, Hydraulic Power Steering Revision M
International Federation of Trucks and Engines
- NAVISTAR MPAPS F-6012-2017 Power Steering High Pressure Hose
- NAVISTAR MPAPS F-6012-2016 Power Steering High Pressure Hose
- NAVISTAR TMS 6012-2016 VOID - Power Steering High Pressure Hose
GM North America
- GM 9985376-1983 Fluid Hydraulic Power Steering
AENOR
- UNE-EN 16288-2:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 3 finish
- UNE-EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish
- UNE-EN 16290-2:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 7,5 R finish
- UNE-EN 16287-2:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 1 finish
Danish Standards Foundation
- DS/EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish
European Committee for Standardization (CEN)
- EN 472:1994 Pressure gauges - Vocabulary
- EN 837-2:1997 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
Indonesia Standards
- SNI 05-3383-1994 Verification of constant amplitude dynamic loads on axial fatique testing machine
RO-ASRO
- STAS 12440/2-1986 Hydraulic fluid power MOUNTING SURFACES ON FOURPORT DIRECTIONAL CONTROL VALVES Dimensions
Japanese Industrial Standards Committee (JISC)
- JIS G 3454:2017 Carbon steel pipes for pressure service
CZ-CSN
- CSN 02 7014-1975 Tapered piston pressure rings with higher tangencial force
WRC - Welding Research Council
- BULLETIN 360-1991 STRESS INDICES@ PRESSURE DESIGN AND STRESS INTENSIFICATION FACTORS FOR LATERALS IN PIPING
Institute of Electrical and Electronics Engineers (IEEE)
- IEEE Std 2807.3-2022 IEEE Guide for Electric-Power-Oriented Knowledge Graph
- IEEE 2807.3-2022 IEEE Guide for Electric-Power-Oriented Knowledge Graph
American Society for Testing and Materials (ASTM)
- ASTM E950-98 Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
- ASTM E950-98(2004) Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
BE-NBN
- NBN 707-1967 Longitudinal effects of internal pressure in polyvinyl chloride pipes without plastic film sheathing
GOST
- GOST R ISO 25620-2022 Laminate floor coverings. Method for determining the force of friction along the longitudinal side for mechanically assembled panels
American Gear Manufacturers Association
- AGMA 2116-A05-2005 Evaluation of Double Flank Testers for Radial Composite Measurement of Gears
