sheath gas effect

sheath gas effect, Total:235 items.

The international standard classification for "sheath gas effect" includes: Other medical equipment , Iron and steel pipes , Hydraulic fluids , Wind turbine systems and other alternative sources of energy , Geology. Meteorology. Hydrology .

The Chinese standard classification for "sheath gas effect" includes: Medical optical instrument and endoscope , Steel tube and cast iron pipe , New energy and others , Meteorology .

Professional Standard - Medicine

YY/T 0842-2011 Medical endoscopes—Endoscope accessories—Sheaths

Professional Standard - Energy

NB/T 14014-2023 Shale gas一Operational specification for gas testing of gas well

Professional Standard - Petroleum

SY 6731-2014 Oil and gas industry oil and gas field with pressure working machine
SY/T 6731-2014 Petroleum and natural gas industries-Snubbing units for oilfield
SY/T 5184-1997 Quartz and for sand control in oil gas wella and water injection wells
SY/T 6698-2007 Recommended practice for coiled tubing operations in oil and gas well services
SY/T 6124-2010 Practice for Water Drainage and Gas Production by Gas Lift Technology
SY/T 6124-1995 Gas-lift Drainage and Gas Recovery Technology
SY 6698-2007 Recommended Practices for Coiled Tubing Operations in Oil and Gas Wells

国家能源局

SY/T 6124-2017 Practice for water drainage and gas production by gas lift

Group Standards of the People's Republic of China

T/CAMDI 105-2023 Disposable percutaneous renal endoscope introducer sheath

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 338-1999 Operating procedures for the installation of gas pipelines for rural household biogas digesters
DB36/T 255-1997 Cotton application biogas fertilizer operating technical regulations

Taiwan Provincial Standard of the People's Republic of China

CNS 12862-1991 Handling and use for coupling of liquefied petroleum gas
CNS 14127-1998 Air brake actuators

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 4752-2016 Operation rules for construction of household anaerobic digesters

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 4752-2002 Operation rules for construction of household anerobie digesters

Hebei Provincial Standard of the People's Republic of China

DB13/T 5290-2020 Electronic special gas cylinder replacement operation specification

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1706-2013 Agricultural Weather Forecast Production Technical Regulations

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 2729-2022 for agricultureweather forecastingfor field cropsseeding

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 1862-2017 Determination of Oxygen Concentration in Workplace Air

中国气象局

QX/T 357-2016 Technical specification for meteorological hydrogen operation safety
QX/T 33-2005 Safety Technical Specifications for Hydrogen Operations in Meteorological Services

Professional Standard - Aquaculture

SC/T 8149-2015 Working inflatable lifejacket for fishing vessel

Professional Standard - Meteorology

QX 33-2005 Safety technical specification of hydrogen operation in the weather station
QX/T 165-2012 Specifications for Safety Operation of 37mm Anti-aircraft Gun Used for Weather Modification Activities

Gansu Provincial Standard of the People's Republic of China

DB62/T 476-1996 Rural Household Biogas Digester Construction Operation Regulations

Professional Standard - Chemical Industry

HG/T 2262-2006 Single stage double action cantilever liquid - Ring pump for chlorine gas

Society of Automotive Engineers (SAE)

SAE AS39029/74-2000 Contacts, electrical connectors, pin, solder, removable, shielded, size 12 (for MIL-C-83723 series III, MIL-C-26482 series 2, MIL-C-83733 and DOD-C-83527 connectors)
SAE AS39029/54-2000 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26500(USAF) AND MIL-C-26518(USAF) CONNECTORS) FSC 5935
SAE AS39029/51-2000 Contacts, electrical connector, socket, crimp removable, shielded (for MIL-C-83733 connectors)
SAE AS39029/76-2000 Contacts, electrical connector, pin, crimp removable, shielded, size 16 (for MIL-C-38999 series I, II, III, IV and MIL- C-24308 connectors)
SAE AS39029/75-2000 Contacts, electrical connector, socket, crimp removable, shielded, size 12 (for MIL-C-38999 series I, III, and IV connectors)
SAE AS39029/73-2000 Contacts, electrical connectors, socket, solder, removable, shielded, size 12 (for MIL-C-83723 series III, MIL-C-26482 series 2, MIL-C-83733, and DOD-C-83527 connectors)
SAE AS39029/28-2000 Contacts, electrical connector, pin, crimp removable, shielded, size 12 (for MIL-C-38999 series I, II, III and IV connectors)
SAE AS39029/77-2000 Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 16 (for MIL-C-38999 Series I, III, and IV Connectors) FSC 5935
SAE AS39029/78-2000 Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 16 (for MIL-C-38999 Series II and Mil-C24308 Connectors) FSC 5935

SAE - SAE International

SAE AS39029/51B-2016 CONTACTS@ ELECTRICAL CONNECTOR@ SOCKET@ CRIMP REMOVABLE@ SHIELDED (FOR MIL-DTL-83733 CONNECTOR)
SAE AS39029/51A-2010 Contacts, electrical connector, socket, crimp removable, shielded (for MIL-C-83733 connectors)
SAE AS39029/74B-2018 Contacts, electrical connectors, pin, solder, removable, shielded, size 12 (for MIL-C-83723 series III, MIL-C-26482 series 2, MIL-C-83733 and DOD-C-83527 connectors)
SAE AS39029/73B-2018 Contacts, electrical connectors, socket, solder, removable, shielded, size 12 (for MIL-C-83723 series III, MIL-C-26482 series 2, MIL-C-83733, and DOD-C-83527 connectors)
SAE AS39029/76A-2010 Contacts, electrical connector, pin, crimp removable, shielded, size 16 (for MIL-C-38999 series I, II, III, IV and MIL- C-24308 connectors)
SAE AS39029/77A-2011 Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 16 (for MIL-C-38999 Series I, III, and IV Connectors) FSC 5935
SAE AS39029/78C-2018 CONTACTS@ ELECTRICAL CONNECTOR@ SOCKET@ CRIMP REMOVABLE@ SHIELDED@ SIZE 16 (FOR MIL-DTL-38999 SERIES II CONNECTORS)
SAE AS39029/77C-2018 CONTACTS@ ELECTRICAL CONNECTOR@ SOCKET@ CRIMP REMOVABLE@ SHIELDED@ SIZE 16 (FOR MIL-DTL-38999 SERIES I@ III@ AND IV CONNECTORS)
SAE AS39029/77B-2013 Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 16 (for MIL-C-38999 Series I, III, and IV Connectors) FSC 5935
SAE AS39029/78B-2013 CONTACTS@ ELECTRICAL CONNECTOR@ SOCKET@ CRIMP REMOVABLE@ SHIELDED@ SIZE 16 (FOR MIL-DTL-38999 SERIES II CONNECTORS)

U.S. Military Regulations and Norms

ARMY MIL-K-70606 (4)-2012 KNIFE, BAYONET, MULTIPURPOSE, M9 WITH SCABBARD
ARMY MIL-K-70606 NOTICE 2-2011 KNIFE, BAYONET, MULTIPURPOSE, M9 WITH SCABBARD

SCC

MIL MIL-K-70606-1988 KNIFE, BAYONET, MULTIPURPOSE, M9 WITH SCABBARD
MIL MIL-DTL-20277K-2014 Knife, Combat; and Sheath, General Specification for
MIL MIL-DTL-20277J-2007 Knife, Combat; and Sheath, General Specification for
CAN1-3.8-1977 Gas equipment for drying crops
DANSK DS/EN ISO 11439/A1:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
DANSK DS/EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
CAN/ULC-D61112-2001 Insulating material blankets for electrical work
CSA 3.8-1999(R2011) Gas-Fired Equipment for Drying Farm Crops
BS ISO 15403:2000 Natural gas. Designation of the quality of natural gas for use as a compressed fuel for vehicles
CSA 3.8-2014(R2019) Gas-Fired Equipment for Drying Farm Crops
IEC 60484:1974 Indirect acting electrical measuring instruments
ISEA 104-1998(R2009) Air Sampling Devices - Diffusive Type for Toxic Gases and Vapors in Working Environments
BS PD ISO/TR 12748:2015 Natural Gas. Wet gas flow measurement in natural gas operations
NS-EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013)
MIL MIL-DTL-28921B-1997 SWORD AND SCABBARD: (OFFICER'S) WITH CASE. (SUPERSEDING MIL-S-28921A)
BS 1865:1952 Specification for air rings (hand made) for hospital use
CAN/ULC-D61235-2000 Live Working - Insulating Hollow Tubes for Electrical Purposes
CAN/ULC-61235-2009 LIVE WORKING – INSULATING HOLLOW TUBES FOR ELECTRICAL PURPOSES
CEI EN 61235:1996 Live working - Insulating hollow tubes for electrical purposes
DANSK DS/EN 61235:1995 Live working - Insulating hollow tubes for electrical purposes
NS 4860:1983 Air quality — Determination of total solid aerosols in work-place air with personal sampler
DANSK DS/ISO 22065:2020 Workplace air – Gases and vapours – Requirements for evaluation of measuring procedures using pumped samplers
BS EN ISO 22065:2019 Workplace air – Gases and vapours. Requirements for evaluation of measuring procedures using pumped samplers
CAN/CGA-3.8-M86-1986 Gas-powered equipment for crop dryers
CAN/CGSB 3.14-2006 Liquefied petroleum gas (propane) used as fuel
NS-EN 838:1995 Workplace atmospheres — Diffusive samplers for the determination of gases and vapours — Requirements and test methods
NS-EN ISO 15403:2005 Natural gas — Designation of the quality of natural gas for use as a compressed fuel for vehicles (ISO 15403:2000)
BS EN ISO 13734:2001 Natural gas. Organic sulfur compounds used as odorants. Requirements and test methods

International Electrotechnical Commission (IEC)

IEC 61920:2004 Infrared free air applications
IEC 61920:1998 Infrared transmission systems - Free air applications

Association Francaise de Normalisation

NF C97-036*NF EN 61920:2005 Infrared free air applications.
NF EN ISO 11439:2013 Gas cylinders - High pressure cylinders for storing natural gas used as fuel on board motor vehicles
NF E29-733*NF EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
NF X43-286*NF EN ISO 22065:2020 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers
NF EN ISO 11439/A1:2021 Gas cylinders - High pressure cylinders for the storage of natural gas used as fuel on board motor vehicles - Amendment 1
FD C18-531:2022 Electrical safety requirements for personnel exposed to electrical risk during non-electrical operations and during simple electrical operations
NF X43-257:2016 Air quality - Air in workplaces - Aerosol sampling using a cassette (4 mm orifice)
NF C18-501:2005 Operation of electrical installations.
NF E29-733/A1*NF EN ISO 11439/A1:2021 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment1
NF ISO 11625:2008 Gas cylinders - Handling safety
NF E29-798*NF ISO 11625:2008 Gas cylinders - Safe handling
NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
NF C18-406*NF EN 61235:1996 Live working. Insulating hollows tubes for electrical purposes.
NF EN ISO 23320:2022 Air in workplaces - Gases and vapors - Requirements for the evaluation of procedures for measurement using diffusion sampling devices
XP M88-771:2004 Manually operated valves for gas installations for buildings
NF EN ISO 22065:2020 Air in workplaces - Gases and vapors - Requirements for the evaluation of measurement procedures using pumped sampling devices
NF C18-501:1997 Operation of electrical installations.
NF EN 481:1993 Workplace atmospheres - Definition of size fractions for measuring airborne particles

American Society for Testing and Materials (ASTM)

ASTM D1946-90(2006) Standard Practice for Analysis of Reformed Gas by Gas Chromatography
ASTM D3283-98 Standard Specification for Air as an Electrical Insulating Material
ASTM D3283-98(2004) Standard Specification for Air as an Electrical Insulating Material
ASTM D1946-90(2015)e1 Standard Practice for Analysis of Reformed Gas by Gas Chromatography
ASTM D4597-10(2021) Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM D4597-10 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM E1370-96(2002) Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
ASTM C1143-89(1994)e1 Standard Specification for Helium for Use as a Cover Gas for Liquid Sodium (Withdrawn 2000)
ASTM D6060-96 Standard Practice for Sampling of Process Vents With a Portable Gas Chromatograph
ASTM D4490-96(2016) Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D4490-23 Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors

AT-ON

ONORM M 7427-1989 Thermally operated flue gas dampers for gas appliances
ONORM M 7428-1989 Mechanically operated flue gas dampers for gas appliances
ONORM EN 481-1993 Workplace atmospheres - Size fraction definitions for measurement of airborne particles
OENORM EN ISO 11439/A1:2020 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013/DAM 1:2020)

International Organization for Standardization (ISO)

ISO 25760:2009 Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders
ISO/TR 16922:2013 Natural gas.Odorization
ISO 22065:2020 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers
ISO 11439:2013/Amd 1:2021 Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles — Amendment 1
ISO/FDIS 6323-1:2024 Workplace air
ISO/CD 30011:2024 Workplace air
ISO 9492:1987 Bases for design of structures; Temperature climatic actions
ISO 19078:2006 Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
ISO 16628:2008 Tracheobronchial tubes - Sizing and marking

CZ-CSN

CSN 18 5608-1981 Electropneumatic and pneumoelectric transmitters for automation
CSN 10 9101-1984 Unified system of industrial pneumatic components. Single and double acting cylinders. Technical requirements
CSN 10 9102-1987 Unified system of industrial pneumatic components. Single and double acting cylinders. Testing methods
CSN IEC 484:1994 Indirect acting electrical measuring instruments
CSN EN 481-1994 Workplace atmospheres. Size fraction definitions for measurement of airborne particles
CSN 07 8304-1988 Gas cylinder - Operation rules
CSN 07 8304-2003 Gas cylinders - Operation rules

European Committee for Standardization (CEN)

EN ISO 25760:2015 Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders (ISO 25760:2009)
prEN 481-1992 Workplace atmospheres; size fraction definitions for measurement of airbone particles
EN 1106:2001 Manually Operated Taps for Gas Burning Appliances
prEN 521-1991 Dedicated liquefied petroleum gas appliances; portable appliances operating at vapeur pressure from liquefied petroleum gas containers

AR-IRAM

IRAM 5128-1961 Screwdriver for electrical work

Korean Agency for Technology and Standards (KATS)

KS G 5162-1995 Manually operater gas valves for gas appliances
KS B ISO 11439-2015(2020) Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
KS B ISO 11439-2020 Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
KS I ISO 15403:2008 Natural gas－Designation of the quality of natural gas for use as a compressed fuel for vehicles
KS C IEC 61235-2016(2021) Live working－Insulating hollow tubes for electrical purposes
KS C IEC 61235:2016 Live working－Insulating hollow tubes for electrical purposes
KS B ISO 11625-2013 Gas cylinders－Safe handling
KS W 0644-1992(2012) Aircraft-Technical Operations-Vocabulary

RO-ASRO

STAS 6745-1971 Climatic prolection TEST TO DAMP' HEAT ACTION

RU-GOST R

GOST R 54961-2012 Gas distribution systems. Consumers gas networks. General requirements to operation. Operational documentation
GOST ISO 11439-2014 Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel. Specifications
GOST R 54983-2012 Gas distribution systems. Natural gas distribution networks. General requirements for operation. Operational documentation
GOST R ISO 11439-2010 Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel. Specifications
GOST R 54982-2012 Gas distribution systems. Objects of liquid petroleum gases. General requirements for operation. Operational documentation
GOST R 54982-2022 Gas distribution systems. Objects of liquid petroleum gases. General requirements for operation. Operational documentation
GOST 32358-2013 Oil and gas wells. Geophysical researches and works in wells. General requirements
GOST 6359-1975 Meteorological barographs of aneroid type. Specifications
GOST 13861-1989 Regulators for gasflame working. General specifications
GOST 28786-1990 Wooden doors. Method for determination of environmental resistance
GOST 32184-2013 Asphaltic materials. Determination for effect of heat and air
GOST 33752-2017 Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications

HU-MSZT

MSZ 7041-1962 Working parameters of gas appliances

German Institute for Standardization

DIN EN 509/A2:2005 Decorative fuel-effect gas appliances; German version EN 509:1999/A2:2004
DIN EN 61920:2004 Infrared free air applications (IEC 61920:2004); German version EN 61920:2004
DIN EN ISO 11439:2022 Gas cylinders – High-pressure cylinders for the in-vehicle storage of natural gas as fuel for motor vehicles
DIN EN ISO 22065 E:2018-05 Requirements for measurement procedures for the evaluation of workplace air gases and vapors using extraction samplers (draft)
DIN EN ISO 23320:2022-08 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022); German version EN ISO 23320:2022
DIN EN ISO 22065:2021-02 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020); German version EN ISO 22065:2020
DIN 50011-12:1987 Artificial climates in technical applications; air temperature as a climatological quantity in controlled-atmosphere test installations
DIN EN 14031:2003 Workplace atmospheres - Determination of airborne endotoxins; German version EN 14031:2003
DIN EN ISO 11439:2022-03 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013 + Amd 1:2021); German version EN ISO 11439:2013 + A1:2021
DIN EN ISO 15403:2007 Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles (ISO 15403:2000); German version EN ISO 15403:2005

Standard Association of Australia （SAA）

AS 2225:1994 Insulating gloves for electrical purposes
AS 4617:2018 Manually operated gas valves
AS 4629.2:2022 Automatically operated valves for use with gas, Part 2: Vent valves

PL-PKN

PN B02013-1987 Actions on building structures Variable environmental actions Atmospheric icing action
PN E04431 ArkusZ01-1974 Electric insulating materials Methods of testing for the resi- stance to the action of chemical agresive atmospheres Test for the resistance to the action of the humide atmosphere containing ammoniac
PN Z70000-02-1988 Medical electrical e?uipment ated operation conditions
PN E04431 ArkusZ02-1974 Electric insulating materials Methods of testing for the resi- stance to the action of chemical agresive atmospheres Test for the resistance to the action of the humide atmosphere containing sulphur dioxide

Defense Logistics Agency

DLA MIL-DTL-32082-2001 COVERALLS, MECHANICS, COLD WEATHER

American Petroleum Institute (API)

API RP 5C7-1996(2007) Recommended Practice for Coiled Tubing Operations in Oil and Gas Well Services

British Standards Institution (BSI)

BS EN ISO 11439:2013+A1:2021 Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
BS EN ISO 22065:2020 Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using pumped samplers
PD ISO/TR 12748:2015 Natural Gas. Wet gas flow measurement in natural gas operations
BS EN 61920:2004 Infrared free air applications
BS EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Designation of the quality
BS IEC 60092-509:2011 Electrical installations in ships. Operation of electrical installations
BS ISO 19926-1:2019 Meteorology. Weather radar - System performance and operation
BS ISO 19078:2013 Gas cylinders. Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
20/30391806 DC BS EN ISO 11439 AMD1. Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
BS EN ISO 23320:2022 Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using diffusive samplers
BS EN ISO 16664:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
BS EN 45544-4:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Guide for selection, installation, use and maintenance
BS ISO 16628:2008 Tracheobronchial tubes - Sizing and marking
BS EN ISO 16664:2004 Gas analysis. Handling of calibration gases and gas mixtures. Guidelines
BS ISO 16628:2009 Tracheobronchial tubes. Sizing and marking

Danish Standards Foundation

DS/EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
DS/IEC 1235/Corr.:1998 Live working - Insulating hollow tubes for electrical purposes
DS/EN 61235:1995 Live working - Insulating hollow tubes for electrical purposes
DS/EN 50110-1:2005 Operation of electrical installations

GSO

GSO ISO 11439:2015 Gas cylinders -- High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
OS GSO ISO 11439:2015 Gas cylinders -- High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
OS GSO ISO 11625:2010 Gas Cylinders –Safe Handling
OS GSO IEC 61235:2014 Live working - Insulating hollow tubes for electrical purposes
GSO IEC 61235:2014 Live working - Insulating hollow tubes for electrical purposes

American Society of Mechanical Engineers (ASME)

ASME STP-TS-012-2008 Thermophysical Properties of Working Gases Used in Gas Turbine Applications
ASME STP-TS-012-2011 Thermophysical Properties of Working Gases Used in Gas Turbine Applications
ASME STP-TS-012-1-2012 Thermophysical Properties of Working Gases Used In Working Gas Turbine Applications (STP-TS-012-1 - 2012)

Canadian Standards Association (CSA)

CSA 3.8-2021 Gas-fired equipment for drying farm crops
CSA 3.8-2014 Gas-fired equipment for drying farm crops (Sixth Edition)

GOST

GOST EN 521-2016 Specification for dedicated liquefied petroleum gas appliances. Portable vapour pressure liquefied petroleum gas appliances

NZS

SNZ HB 5257.2:2004 Gas appliance safety - Audit workbook

KR-KS

KS I ISO 15403-2008 Natural gas－Designation of the quality of natural gas for use as a compressed fuel for vehicles
KS B ISO 11625-2008 Gas cylinders－Safe handling
KS C IEC 61235-2016 Live working－Insulating hollow tubes for electrical purposes

Lithuanian Standards Office

LST EN ISO 11439:2002 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2000)
LST EN 50110-1-2005 Operation of electrical installations

IN-BIS

IS 8198 Pt.12-1982 Code of practice for compressed gas cylinders Part XII Gases for medical use
IS 8198 Pt.9-1988 Code of Practice for Cylinders for Compressed Gases Part 9 Sulfur Dioxide Gas
IS 8198 Pt.1-1984 Code of practice for compressed gas cylinders Part 1 Atmospheric gases

FI-SFS

SFS 3861-1978 Determining the content of water vapor in the air at the workplace using the carbon tube method

DIN

DIN EN 50110-1:2005 Operation of electrical installations; German version EN 50110-1:2004

NO-SN

NS 4860-1983 Air quality - Determination of total solid aerosols in work-place air with personal sampler

Spanish Association for Standardization (UNE)

UNE-EN 61235:1997 ERRATUM LIVE WORKING. INSULATING HOLLOW TUBES FOR ELECTRICAL PURPOSES.
UNE-EN 61235:1996 LIVE WORKING. INSULATING HOLLOW TUBES FOR ELECTRICAL PURPOSES.
UNE-EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013)
UNE-EN ISO 22065:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
UNE-EN ISO 23320:2023 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022)
UNE-EN 50110-1:1998 OPERATION OF ELECTRICAL INSTALLATIONS.
UNE-EN ISO 11439:2013/A1:2022 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment 1 (ISO 11439:2013/Amd 1:2021)
UNE-EN 50110-1:2006 Operation of electrical installations

Association of German Mechanical Engineers

DVS 0205-1986 Technical gases for welding, cutting and related work processes; argon

PT-IPQ

NP 928-1987 Natural gas heating appliances. Domestic gas fuel appliances for food preparation
NP EN 50110-1-1999 Operation of electrical installations

American Gas Association

AGA ILPG-1996 Introduction to LPG Safety for Propane-Air Plant Operators

VDI - Verein Deutscher Ingenieure

VDI 2046-1969 Safety guidelines for the operation of industrial furnaces with protective and reaction gases

CENELEC - European Committee for Electrotechnical Standardization

EN 50110-1:2004 Operation of Electrical Installations
EN 50110-1:1996 Operation of Electrical Installations

US-HI

HI 10.1-10.5-2010 Air - Operated Pumps for Nomenclature, Definitions, Application, and Operation

GOSTR

GOST 28786-2019 Wooden and composite doors. Determination of properties in different climatic conditions

American National Standards Institute （ANSI)

ANSI/EASA AR100-2010 Recommended Practice for the Repair of Electrical Apparatus
ANSI/HI 10.1-10.5-2021 Air-Operated Pumps for Nomenclature, Definitions, Application, and Operation