The sample divider is suitable for

The sample divider is suitable for, Total:357 items.

The international standard classification for "The sample divider is suitable for" includes: Application of statistical methods , Welding equipment , Domestic electrical appliances in general , Sterilization and disinfection in general .

The Chinese standard classification for "The sample divider is suitable for" includes: Mathematics , Technical management , Movie, photo, micro and copier equipment in general , Welding and cutting equipment , Public medical equipment , Telecommunication technical requirements and interface .

Professional Standard - Agriculture

GB/T 2828-1987 Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)
GB/T 2829-1987 Sampling procedures and tables for periodic inspection by attributes ( Apply to inspection of stability for productive process)

Professional Standard - Electron

SJ/Z 2815-1987 Sampling procedures and tables for lot-by-lot inspection by attributes(applicable to inspection of isolated lot or batch)

Professional Standard - Machinery

JB/T 5194-1991 Camera Inspection-sampling Procedure and Table for Inspection by Attributes (Applicable to Continuous Batch Inspection)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 25301-2010 Resistance welding equipment—General specifications applicable to all transformers
GB/T 14162-1993 Sampling procedures and tables for product quality audit(Apply to inspection by attributes for nonconformities per hundred units)
GB/T 16307-1996 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
GB/T 6378-2002 Sampling procedures and charts for inspection by variables for percent nonconforming (Applied to inspection of successive lots or batches)
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 25301-2021 Resistance welding equipment - Transformers - General specifications applicable to all transformers
GB/T 40443-2021 Household electrical appliances suitable for older persons—General technical requirements

Professional Standard - Rare Earth

XB/T 606.3-1995 Determination of moisture in rare earth product chemical analysis method (applicable to samples containing more than 0.2% moisture in rare earth fluoride)

Group Standards of the People's Republic of China

T/CPIA 0068-2024 Solar simulator performance requirements for perovskite photovoltaic devices

Professional Standard - Medicine

YY/T 1267-2015 Evaluation of materials of medical device subject to ethylene oxide sterilization
YY/T 1264-2015 Evaluation of materials of medical device subject to ozone sterilization
YY/T 1266-2015 Evaluation of materials of medical device subject to hydrogen peroxide sterilization
YY/T 1263-2015 Evaluation of materials of medical device subject to dry heat sterilization
YY/T 1265-2015 Evaluation of materials of medical device subject to moist heat sterilization

Professional Standard - Post and Telecommunication

YD/T 1015-1999 Technical requirement for Q interface adapter used in transmission equipment

未注明发布机构

SAE AS 39029/12D-2024 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS81659 SERIES 2 CONNECTORS)
DIN 975 E:1993-01 Threaded rods (not intended for new designs)
DIN 975:1970 Threaded rods (not intended for new designs)
DIN EN ISO 5826 E:2012-06 Resistance welding equipment transformers General specification applicable to all transformers (draft)
DIN EN ISO 5826 E:2013-04 Resistance welding equipment transformers General specification applicable to all transformers (draft)
SAE AS 39029/11D-2024 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS81659 SERIES 2 CONNECTORS)

未注明发布机构

DIN 975:1970 Threaded rods (not intended for new designs)
SAE AS 39029/11D-2024 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS81659 SERIES 2 CONNECTORS)
DIN EN ISO 5826 E:2013-04 Resistance welding equipment transformers General specification applicable to all transformers (draft)
DIN EN ISO 5826 E:2012-06 Resistance welding equipment transformers General specification applicable to all transformers (draft)
DIN 975 E:1993-01 Threaded rods (not intended for new designs)
SAE AS 39029/12D-2024 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS81659 SERIES 2 CONNECTORS)

AENOR

UNE 21021:1983 ADAPTERS FOR ELECTRIC LINES TO 72,5 KV.
UNE 22062:1963 ADAPTORS FOR THE HOSE COUPLING OF MINING PNEUMATIC HAMMER.
UNE-EN ISO 5826:2014 Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014)
UNE 15416:1992 MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. SPINDLE NOSES AND ADJUSTABLE ADAPTORS FOR MULTI-SPINDLE HEADS.

SE-SIS

SIS SS 22 40 01-1985 Textile glass - Method for sampling applicable to batches
SIS SS-ISO 5826:1987 Transformers for resistance welding machines - General specifications applicable to all transformers

International Organization for Standardization (ISO)

ISO 1886:1980 Textile glass — Method of sampling applicable to batches
ISO 5826:2014 Resistance welding equipment - Transformers - General specifications applicable to all transformers
ISO 5826:1983 Transformers for resistance welding machines — General specifications applicable to all transformers
ISO 17324:2014 Rubber hoses for automotive turbochargers - Specification
ISO 39511:2018 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
ISO 5826:1999 Resistance welding equipment - Transformers - General specifications applicable to all transformers
ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
ISO/TR 230-11:2018 Test code for machine tools — Part 11: Measuring instruments suitable for machine tool geometry tests
ISO 8423:1991 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)

Association Francaise de Normalisation

NF T25-001:1995 Reinforced fibres. Sampling plans applicable to received batches.
NF EN 50243:2022 Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid-filled transformers
NF EN 60835-2-8/A1:1996 Measurement methods applicable to equipment used for digital microwave transmission systems - Part 2: measurements applicable to terrestrial radio relays section 8: self-adaptive equalizers
NF EN 60835-2-8:1993 Measurement methods applicable to equipment used for digital microwave transmission systems - Part 2: measurements applicable to terrestrial radio relays section 8: self-adaptive equalizers
NF EN ISO 5826:2014 Resistance welding equipment - Transformers - General specifications applicable to all transformers
NF EN IEC 61854:2020 Lignes aériennes - Exigences et essais applicables aux entretoises
FD T90-878*FD CEN/TR 17245:2018 Water quality - Technical report for the routine sampling of benthic diatoms from rivers and lakes adapted for metabarcoding analyses
FD CEN/TR 17245:2018 Water quality - Technical report for routine sampling of benthic diatoms in rivers and water bodies suitable for metabarcoding analyzes
NF EN 60244-10:1993 Measuring methods applicable to radio transmitters - Part ten: measuring methods applicable to television transmitters and retransmitters, and using insertion signals
NF EN 60835-3-5:1994 Measurement methods applicable to equipment used for digital microwave transmission systems - Part 3: measurements applicable to satellite telecommunications earth stations - Section 5: step-up converters...
NF EN 61297:1996 Industrial process control systems - Classification of adaptive controllers for evaluation
NF EN 60835-3-4:1996 Measurement methods applicable to equipment used for digital microwave transmission systems - Part 3: measurements applicable to satellite telecommunications earth stations - Section 4: low-power amplifier ...
NF EN 60835-3-6:1997 MEASUREMENT METHODS APPLICABLE TO EQUIPMENT USED FOR DIGITAL MICROWAVE TRANSMISSION SYSTEMS. PART 3: MEASURES APPLICABLE TO SATELLITE TELECOMMUNICATIONS EARTH STATIONS. SECTION 6: POWER AMPLIFIERS. (NORM...
NF A82-040:1985 Electric resistance welding. Transformers for resistance welding machines. General specifications applicable to all transformers.
NF A82-048:2003 Resistance welding equipment - Transformers - General specifications applicable to all transformers.
NF A82-048*NF EN ISO 5826:2014 Resistance welding equipment - Transformers - General specifications applicable to all transformers
NF EN 60603-9:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 9: connectors for pluggable printed boards, backplane connections and cable connectors, for 2.54 mm (0.1 in) base grid
NF C52-176-22-8*NF EN IEC 60076-22-8:2021 Power transformers - Part 22-8 : power transformer and reactor fittings - Devices suitable for use in communication networks
NF EN 60835-2-4/A1:1998 Measurement methods applicable to equipment used for digital microwave transmission systems - Part 2: measurements applicable to terrestrial radio relays - Section 4: transmitter/receiver, modulator/demodulator included
NF EN 60835-2-4:1996 Measurement methods applicable to equipment used for digital microwave transmission systems - Part 2: measurements applicable to terrestrial radio relays - Section 4: transmitter/receiver, modulator/demodulator included

SCC

MIL MIL-DTL-24231/16E-2013 Connector, Adapter, for Molded Plug, Type II, Seven-Conductor
MIL MIL-DTL-24231/17E-2013 Connector, Adapter, for Molded Plug, Type II, Nine-Conductor
BS EN ISO 1886:1995 Reinforcement fibres. Sampling plans applicable to received batches
BS 1935:1953 Adjustable adaptors for multiple spindle heads
MIL MIL-A-44264-1986 ADAPTER KIT, M-1 CAP; FOR CANTEEN, WATER, INSULATED
AENOR UNE 81600:1985 SAFETY TECHNIQUES APPLIED TO MACHINES
NS-EN ISO 1886:1994 Reinforcement fibres — Sampling plan applicable to received batches (ISO 1886:1990)
MIL MIL-DTL-5423/6E-2019 Boot, Dust and Water Seal, Type B (for Push-Button Switches), Style 1 (One - Hole Mounting, Adapter Type)
MIL MIL-DTL-5423/6C-2008 Boot, Dust and Water Seal, Type B (for Push-Button Switches), Style 1 (One - Hole Mounting, Adapter Type)
MIL MIL-DTL-5423/6D-2009 Boot, Dust and Water Seal, Type B (for Push-Button Switches), Style 1 (One - Hole Mounting, Adapter Type)
AWWA WQTC57029 LIMS is Not Only for the Laboratory, It's for Clients Too
AENOR UNE 20311:1967 VOLTAGE STABILIZERS UP TO 300 VA FOR APPLIANCES
UNE-EN 738-4:1999 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 4: LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT
MIL MIL-PRF-32023-1998 ADAPTER KIT - GRAVITY FEED, FOR 5-GALLON MILITARY PLASTIC FUEL CAN
MIL MIL-A-71179-1993 ADAPTER, METAL PALLET FOR STINGER WEAPON SYSTEM
BS 3499-9B:1966 Specification for school music equipment. Amplifiers suitable for use with musical instruments
DANSK DS/EN 50243:2002 Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
IAPMO IGC 359-2019 Flexible Expansion Couplings for DWV Stack Applications
MIL MIL-C-24707/2-1989 CASTINGS, FOR PRESSURE CONTAINING PARTS SUITABLE FOR HIGH TEMPERATURE SERVICE
DIN EN 50243 E:2023 Draft Document - Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers; German version EN 50243:2022
CEI EN 50243:2002 Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
CSA 6.27-2016/ANSI Z21.75-2016(R2021) Connectors for Outdoor Gas Appliances and Manufactured Homes
NS 1955:1967 Taper cup grinding wheels for portable machines
CSA ANSI Z21.75-2001/CSA 6.27-2001 Connectors for Outdoor Gas Appliances and Manufactured Homes
MIL MIL-L-13802-1954 LACQUER, CHLORINE RESISTANT, FOR FIBER CONTAINERS (NO S/S DOCUMENT)
MIL MIL-DTL-24231/6F-2013 Connector, Single Cable, Type III, for DSS-3 Cable
CAN/CSA Z314.7-2003(R2013) Steam Sterilizers for Health Care Facilities
CSA ANSI Z21.75-2007/CSA 6.27-2007(R2012) Connectors for Outdoor Gas Appliances and Manufactured Homes
CAN/CSA-Z314.7-2003(R2013) Steam Sterilizers for Health Care Facilities
MIL MIL-DTL-24231/26E-2013 Connector, Single Cable, Type III, for Type 2SWF Cables
DANSK DS/EN ISO 5826:2014 Resistance welding equipment - Transformers - General specifications applicable to all transformers
MIL MIL-O-44368-1989 OPENER, CAN, HAND, FOR TRAY PACKS AND ROUND CANS
AS P6:1969 Continuous stationery for computer and other business machines
MIL MIL-DTL-24231/15E-2013 Connector, Adapter, for Molded Plug, Type II, Three-and Four-Conductor
MIL MIL-D-48350-1974 DISPENSER CONTROL PANEL FOR M56/XM58, MINES/MARKERS (NO S/S DOCUMENT)
SN-CEN/TR 17245:2018 Water quality — Technical report for the routine sampling of benthic diatoms from rivers and lakes adapted for metabarcoding analyses
DANSK DS/CEN/TR 17245:2018 Water quality – Technical report for the routine sampling of benthic diatoms from rivers and lakes adapted for metabarcoding analyses
MIL MIL-DTL-5423/6B-2002 BOOT, DUST AND WATER SEAL, TYPE B (FOR PUSH-BUTTON SWITCHES), STYLE 1 (ONE - HOLE MOUNTING, ADAPTER TYPE) (SUPERSEDING MIL-B-5423/6A)
BS 1548:1949 Analysed samples for metallurgical analysis
ITU-T L.1000-2019 Universal power adapter and charger solution for mobile terminals and other hand-held ICT devices
NS 1:1944 Condenser gland for 19 mm (3/4") outside diameter pipe
BS PD CEN/TR 17245:2018 Water quality. Technical report for the routine sampling of benthic diatoms from rivers and lakes adapted for metabarcoding analyses
MIL MIL-T-45539-1963 TRIGGER, WINTER (FOR SMALL ARMS) (NO S/S DOCUMENT)
DANSK DS/CLC/TS 50458:2006 Capacitance graded outdoor bushing 52 kV up to 420 kV for oil immersed transformers
MIL MIL-DTL-24231/24E-2013 Connector, Single Cable, Type III, Three-Conductor, for LSTHOF-9 Cable
CSA B140.10-2006(C2015) Hot air oil heaters for mobile homes and RVs
IAPMO IGC 301-2013 Flexible Drain Connectors for Lavatories and Sinks
NS 1954:1967 Straight and cup grinding wheels for portable machines
CEI CLC/TS 50458:2006 Capacitance graded outdoor bushing 52 kV up to 420 kV for oil immersed transformers
CAN/CGSB-152.3-M86-1986 Commercial canister vacuum cleaner, for wet and dry waste
MIL MIL-C-17671F-1989 CANISTER, OXYGEN BREATHING APPARATUS, FOR TYPE A-4 (SUPERSEDING MIL-C-17671E)
MIL MIL-DTL-24231/27F-2013 Connector, Receptacle, Multi-Pin, Type V, for Type LS2SWU-1 Cable
MIL MIL-DTL-32248-2008 Cartridge, Ignition: M1020 for the 120MM Mortar M120 and M121
MIL MIL-S-22999/1-1981 STARTER, AIRCRAFT ENGINE, HYDRAULIC FOR T58 ENGINE
AENOR UNE 41122:1959 TAKING SAMPLES OF WATER DESTINED FOR CHEMICAL ANALYSIS
AWWA WQTC57100 Adaptation of Method 1622 for Cryptosporidium for Analysis of Wastewater
12/30246951 DC BS ISO 5826. Resistance welding equipment. Transformers. General specifications applicable to all transformers
MIL MIL-S-45875-1975 SYNCHRO TRANSMITTER, FOR M5 BAROSWITCH (NO S/S DOCUMENT)
CSA B137.2-1999 PVC Injection-Moulded Gasketed Fittings for Pressure Applications gasketed fittings for pressure applications
SN-CWA 17857:2022 Lens-based adaptor system for coupling fibre optic to infrared semiconductor lasers
NS-EN ISO 5826:2003 Resistance welding equipment — Transformers — General specifications applicable to all transformers (ISO 5826:1999)
API 660-1993 Shell and Tube Heat Exchangers for General Refinery Services
MIL MIL-W-48843-1975 WIRING HARNESS, RELAY ASSEMBLY, TRAINING, FOR M109E1 (NO S/S DOCUMENT)
UNE-EN ISO 5826:2004 Resistance welding equipment. Transformers. General specifications applicable to all transformers (ISO 5826:1999)
AENOR UNE-EN ISO 5826:2014 Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014)
MIL MIL-DTL-83538/9A-1998 CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ADAPTER, ACCESSORY, LAUNCHER RECEPTACLE FOR MIL-STD-1760 APPLICATIONS (METRIC) (SUPERSEDING MIL-C-83538/9)
MIL MIL-M-62515-1985 MAINTENANCE REPAIR KIT, ELECTRICAL, FOR M901A1 AND M981 WEAPONS SYSTEMS
NS-EN ISO 5826:2014 Resistance welding equipment — Transformers — General specifications applicable to all transformers (ISO 5826:2014)
AENOR UNE 25102:1957 Wheel rim profile, for railways with a gauge of 1 m. (also applicable for track widths that differ by less than 10 percent).
DANSK DS/EN 61297:1997 Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation
IAPMO PS 112-1999 PVC Plastic Valves For Cold Water Distribution Systems Outside a Building and CPVC Plastic Valves For Hot and Cold Water Distribution Systems
CEI EN 61297:1997 Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation
IAPMO PS 94-2012 Insulated Protectors for P-Traps, Supply Stops, and Risers
DANSK DS/EN IEC 60076-22-8:2021 Power transformers – Part 22-8: Power transformer and reactor fittings – Devices suitable for use in communication networks
MIL MIL-C-24231/16D-1987 CONNECTOR, ADAPTER, FOR MOLDED PLUG, TYPE II, SEVEN-CONDUCTOR (SUPERSEDING MIL-C-24231/16C)
MIL MIL-C-24231/17D-1987 CONNECTOR, ADAPTER, FOR MOLDED PLUG, TYPE II, NINE-CONDUCTOR (SUPERSEDING MIL-C-24231/17C)
AENOR UNE 21095:1973 PROTECTION BOXES WITH FUSE CIRCUIT BREAKERS FOR DISTRIBUTION NETWORKS UP TO 440 V
SAE AS39029/11D-2024 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS81659 SERIES 2 CONNECTORS)
CEI EN IEC 60076-22-8:2022 Power transformers Part 22-8: Power transformer and reactor fittings - Devices suitable for use in communication networks
AENOR UNE 20166-1:1986 Dimensions of small power motors for particular applications. Electric motors for liquid fuel burners.
CAN/CGSB 4.149-M90-1990 Vinyl Coated Fabric for Public Seating
MIL MIL-C-83538/9-1994 CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ADAPTER, ACCESSORY, LAUNCHER RECEPTACLE FOR MIL-STD-1760 APPLICATIONS (METRIC) (S/S BY MIL-DTL-83538/9A)
DANSK DS/HD 134.5 S1:2016 Radio-frequency connectors – Part 5: R.F. coaxial connectors for cables 96 IEC 60050-17 and larger
SAE AS39029/12D-2024 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS81659 SERIES 2 CONNECTORS)

United States Navy

NAVY MIL-DTL-24231/17 E-2013 CONNECTOR, ADAPTER, FOR MOLDED PLUG, TYPE II, NINE-CONDUCTOR
NAVY MIL-DTL-24231/16 E-2013 CONNECTOR, ADAPTER, FOR MOLDED PLUG, TYPE II, SEVEN-CONDUCTOR
NAVY MIL-DTL-24231/15 E-2013 CONNECTOR, ADAPTER, FOR MOLDED PLUG, TYPE II, THREE- AND FOUR-CONDUCTOR
NAVY MIL-A-82451 NOTICE 1-1998 ACTUATOR ASSEMBLY TEST SET, (FOR TORPEDO MK 46 MOD 1)

British Standards Institution (BSI)

BS EN ISO 1886:1995(1999)*BS 2782-10-Method 1007:1995 Reinforcement fibres — Sampling plans applicable to received batches
BS EN 61378-2:2001 Convertor transformers. Transformers for HVDC applications
BS EN ISO 21945:2020 Solid biofuels. Simplified sampling method for small scale applications
16/30336914 DC BS EN 60076-57-129. Convertor transformers. Part 57-129. Transformers for HVDC applications
18/30354921 DC BS EN ISO 21945. Solid biofuels. Simplified sampling method for small scale applications
BS ISO 17324:2014 Rubber hoses for automotive turbochargers. Specification
BS EN ISO 5826:2003 Resistance welding equipment - Transformers - General specifications applicable to all transformers
BS 731-1:1952(1999) Specification for Flexible steel conduit and adaptors for the protection of electric cable
BS EN 61297:1996 Industrial-process control systems. Classification of adaptive controllers for the purpose of evaluation
BS EN 61297:1996(2000) Industrial - process control systems — Classification of adaptive controllers for the purpose of evaluation
PD 6528-1990 Method for verifying accuracy of tan delta measurements applicable to capacitors

Danish Standards Foundation

DS/EN ISO 1886:1995 Reinforcement fibres - Sampling plans applicable to received batches
DS/ISO 5826:1984 Transformers for resistance welding machines. General specifications applicable to all transformers
DS/EN ISO 5826:2003 Resistance welding equipment - Transformers - General specifications applicable to all transformers
DS/ISO 15004-1:2020 Ophthalmic instruments – Fundamental requirements and test methods – Part 1: General requirements applicable to all ophthalmic instruments
DS/EN IEC 60076-22-8:2021 Power transformers – Part 22-8: Power transformer and reactor fittings – Devices suitable for use in communication networks

Society of Automotive Engineers (SAE)

SAE AGS1171-6-1944 AGS1171 "Y" Adaptor (for Fuel Tank Fire Extinguisher)
SAE AGS1164-6-1944 AGS1164 "T" Adaptor (for Fuel Tank Fire Extinguisher)
SAE AS27650-7-1992 AS27650-699 Adaptor, Elbow, Pipe (for Inch Pipes)
SAE AS63000-1-1991 AS63000-049 Adaptor, Elbow, Pipe (for inch Pipes)
SAE AS63050-1-1991 AS63050-099 Adaptor, Elbow, Pipe (for inch Pipes)
SAE AGS1211-7-1944 AGS1211 Adaptor Block (1/4 B.S.P.) for Air Charging Valve
SAE AS27400-4-1988 AS27400-449 Adaptor, Straight, Pipe (for Inch Pipes)
SAE AS27550-4-1988 AS27550-599 Adaptor, Straight, Pipe (for Metric Pipes)
SAE AS27350-4-1988 AS27350-399 Adaptor, Straight, Pipe (for Inch Pipes)
SAE AS63100-1-1991 AS63100-149 Adaptor, Elbow, Pipe (for Metric Pipes)
SAE AS4301-1993 Reducer - Adapter, Conical End to Flared Tube, for Seal Ring
SAE AS27500-4-1988 AS27500-549 Adaptor, Straight, Pipe (for Metric Pipes)
SAE AS27700-4-1988 AS27700-749 Adaptor, Elbow, Pipe (for Metric Pipes)
SAE AS4301-2002 REDUCER - ADAPTER, CONICAL END TO FLARED TUBE, FOR SEAL RING
SAE AS27750-4-1988 AS27750-799 Adaptor, Elbow, Pipe (for Metric Pipes)
SAE AS85049/59_A3-2010 Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-C-22992 Connectors, Classes C, J, and R)
SAE AS63150-1-1991 AS63150-199 Adaptor, Elbow, Pipe (for Metric Pipes)
SAE AS85049/59_A2-2009 Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-DTL-22992 Connectors, Classes C, J, and R)
SAE AS85049/59_A1-2006 Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-C-22992 Connectors, Classes C, J, and R)
SAE AS85049/62B-2017 CONNECTOR ACCESSORIES, ELECTRICAL ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
SAE AS4307-2002 ADAPTER, FLARED TUBE TO BOSS, FOR SEAL RING
SAE AS4317-2002 REDUCER, ADAPTER, FLARED TUBE TO BOSS, FOR SEAL RING
SAE AS4319-2002 EXPANDER, ADAPTER, FLARED TUBE TO BOSS, FOR SEAL RING
SAE AS85049/59-2006 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-C-22992 CONNECTORS, CLASSES C, J, AND R)
SAE AS85049/59B-2019 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
SAE RS-182-1-1943 RS182 Fits for Ball Bearings
SAE AS39029/69B-2019 CONTACT, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, FOR AS85028 CONNECTORS
SAE AS33703B-2020 INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 37 (FOR AS81703 CONNECTORS)
SAE AS4318-2002 ADAPTER, FLARED TUBE .375 BULKHEAD TO BOSS, FOR SEAL RING
SAE AMS2411K-2024 Plating, Silver for High Temperature Applications
SAE AS33702B-2020 INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 27 (FOR AS81703 CONNECTORS)
SAE ARP1874-1988 Design Objectives for CRT Displays for Part 25 (Transport) Aircraft
SAE AS33698A-2022 INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 3 (FOR AS81703 CONNECTORS)
SAE AS33700B-2020 INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 12 (FOR AS81703 CONNECTORS)
SAE AS33704-2019 INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR, SHELL SIZE 61 (FOR AS81703 CONNECTORS)
SAE AS33699B-2020 INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 7 (FOR AS81703 CONNECTORS)
SAE AS33701B-2020 INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 19 (FOR AS81703 CONNECTORS)
SAE AS39029/93-2006 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR DOD-C-83527, CONNECTOR)
SAE AS39029/93B-2019 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-83527, CONNECTOR)
SAE AS39029/93C-2023 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-83527, CONNECTOR)
SAE ARP4067-1989 DESIGN OBJECTIVES FOR CRT DISPLAYS FOR PART 23 AIRCRAFT
SAE AS85049/61B-2011 Connector Accessories, Electrical, Ring, Potting Boot, Category 5 (for MIL-DTL-27599 Connectors)
SAE AS39029/94-2006 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR DOD-C-83527, CONNECTOR)

HU-MSZT

MNOSZ 4316-1955 Pressure reducer suitable for natural gas pipelines
MSZ 11691/3.lap-1966 Solution can be applied to clothing Increase can be applied to suits, clothing and pants

GSO

GSO 1416:2002 Food samples refills taken for analysis
GSO IEC 61755-3-2:2014 Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
BH GSO ISO 5826:2016 Resistance welding equipment -- Transformers -- General specifications applicable to all transformers
GSO ISO 5826:2015 Resistance welding equipment -- Transformers -- General specifications applicable to all transformers
OS GSO ISO 5826:2015 Resistance welding equipment -- Transformers -- General specifications applicable to all transformers
GSO IEC 61754-21:2013 Fibre optic connector interfaces - Part 21: Type SMI connector family for plastic optical fibre
GSO ISO 2905:2015 Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi-spindle heads
GSO ISO 6710:2013 Single-use containers for venous blood specimen collection
BH GSO IEC 61297:2016 Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation
OS GSO IEC 61297:2014 Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation
BH GSO IEC 60076-22-8:2023 Power transformers - Part 22-8: Power transformer and reactor fittings - Devices suitable for use in communication networks
OS GSO ISO 2905:2015 Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi-spindle heads
GSO IEC 61010-2-40:2014 This Test Report Form applies to IEC 61010-2-040: 2005 (ed.1); for use in conjunction with IEC 61010-1:2001 (ed.2)
GSO IEC 60076-22-8:2023 Power transformers - Part 22-8: Power transformer and reactor fittings - Devices suitable for use in communication networks
GSO IEC 60169-5:2014 Radio-frequency connectors. Part 5: R.F. coaxial connectors for cables 96 IEC 50-17 and larger
OS GSO IEC 60169-5:2014 Radio-frequency connectors. Part 5: R.F. coaxial connectors for cables 96 IEC 50-17 and larger
BH GSO ISO 2905:2017 Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi-spindle heads

ES-UNE

UNE-EN 125100:1991 SS: MAGNETIC OXIDE CORES FOR INDUCTOR APPLICATIONS. (Endorsed by AENOR in September of 1996.)
UNE-CEN/TR 17245:2018 Water quality - Technical report for the routine sampling of benthic diatoms from rivers and lakes adapted for metabarcoding analyses (Endorsed by Asociación Española de Normalización in October of 2018.)
UNE-EN 62216:2011 Digital terrestrial television receivers for the DVB-T system (Endorsed by AENOR in October of 2012.)
UNE-EN 61297:1995 INDUSTRIAL-PROCESS CONTROL SYSTEMS. CLASSIFICATION OF ADAPTIVE CONTROLLERS FOR THE PURPOSE OF EVALUATION. (Endorsed by AENOR in May of 1996.)
UNE-ISO 12646:2018 Graphic tecnology. Displays for color proofing. Characteristics
UNE-EN IEC 60076-22-8:2021 Power transformers - Part 22-8: Power transformer and reactor fittings - Devices suitable for use in communication networks (Endorsed by Asociación Española de Normalización in October of 2021.)

CH-SNV

SEV 153-1941 Suitable for machine and instrument coating shades. General application
SN 055 000-1981 Tapered long shaft ends for machines and instruments
VSM 11877-1942 Cylindrical shaft ends for machines and instruments
SN 198 411-1984 Coupons of textile fabrics - Determination of length and width
SN 181 160/1-1988 Short conical shaft ends for machines and instruments
SNV 219 505.12-1970 coating. Medium gray tone suitable for machine and instrument coatings
SEV 3005-1961 coating. Bright gray shade for machine and instrument coatings
SNV 195 884-1970 Shades suitable for machine and instrument coatings in special cases
SN 253 171-1985 Refrigerating plants - Safety devices
SEV 4006-1962 PE thread for screw fuses up to 60 A
SNV 41105-1954 SA thread for plug-in fuses up to 60 A
SNV 24507-1937 Copper and copper alloy tubes for capacitors and heat exchangers size and weight
SNV 81510-1955 Copper and copper alloy tubes, suitable for capacitors and heat exchangers. Technical delivery conditions

AIA/NAS - Aerospace Industries Association of America Inc.

NAS408-1955 Valve and Adapter Low Pressure Oxygen Connection Design of (For Aircraft)
NAS407-1955 Valve and Adapter Low Pressure Oxygen Connection Installation of (For Aircraft)
NAS402-1978 Adapter - Fuel and Oil Tank Filler Cap@ Design and Installation of (for Aircraft) (Rev 1)

U.S. Military Regulations and Norms

ARMY MIL-A-70609 A VALID NOTICE 2-2013 Adapter and Fuze, Assembly: M624, Parts for
ARMY MIL-DTL-32246 (1)-2012 CARTRIDGE, IGNITION, M702 FOR 60 MM MORTAR

TR-TSE

TS 2713-1977 Methods Of Measurement On Radio Receivers For Various Classes Of Emission Part I: General Condidions For Measurements Measuring Methods Applying To Several Types Of Receivers

SAE - SAE International

SAE AS34801A-2018 TOOL@ CONNECTOR ASSEMBLY; FOR MIL-C-5015 CONNECTORS
SAE AS25439B-2014 SPLICE-PERMANENT CRIMP STYLE@ 2 WAY TYPE FOR ALUMINUM AIRCRAFT WIRE@ CLASS 1
SAE AS25439-2000 Splice-Permanent Crimp Style@ 2 Way Type for Aluminum Aircraft Wire@ Class 1
SAE AS25439A-2006 SPLICE-PERMANENT CRIMP STYLE@ 2 WAY TYPE FOR ALUMINUM AIRCRAFT WIRE@ CLASS 1
SAE AS85049/59-A1-2006 Connector Accessories@ Electrical@ Adapter@ Shrink Boot@ Category 5 (For MIL-C-22992 Connectors@ Classes C@ J@ and R)
SAE AS85049/59A-2011 CONNECTOR ACCESSORIES@ ELECTRICAL@ ADAPTER@ SHRINK BOOT@ CATEGORY 5 (FOR MIL-C-22992 CONNECTORS@ CLASSES C@ J@ AND R)
SAE AS85049/59-A2-2009 Connector Accessories@ Electrical@ Adapter@ Shrink Boot@ Category 5 (For MIL-DTL-22992 Connectors@ Classes C@ J@ and R)
SAE AS85049/59B-2014 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
SAE AS85049/59-2000 CONNECTOR ACCESSORIES@ ELECTRICAL@ ADAPTER@ SHRINK BOOT@ CATEGORY 5 (FOR MIL-C-22992 CONNECTORS@ CLASSES C@ J@ AND R)
SAE AS85049/62C-2019 CONNECTOR ACCESSORIES@ ELECTRICAL ADAPTER@ SHRINK BOOT@ CATEGORY 5 (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
SAE AS33702B-2015 INSERT ARRANGEMENTS@ ELECTRIC CONNECTOR@ SHELL SIZE 27 (FOR AS81703 CONNECTORS)
SAE AS39029/69A-2009 Connector Contacts@ Electrical Socket@ Crimp Removable@ for Mil-C-85028 (AS) Connectors (FSC 5935)
SAE AS39029/69B-2014 CONTACT, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, FOR AS85028 CONNECTORS
SAE AIR31-1962 ENVIRONMENTAL CONDITIONS APPLICABLE TO TRANSPORT AIRCRAFT ELECTRICAL EQUIPMENT
SAE AS33704-2014 INSERT ARRANGEMENTS@ ELECTRICAL CONNECTOR@ SHELL SIZE 61 (FOR AS81703 CONNECTORS)
SAE AS39029/69-2001 Connector Contacts@ Electrical Socket@ Crimp Removable@ for Mil-C-85028 (AS) Connectors (FSC 5935)

Defense Logistics Agency

DLA MS3185 REV B-2013 MOLD, POTTING, AND ADAPTER, ELECTRICAL CONNECTOR (FOR MIL-DTL-26482, SERIES 1, CLASS P)
DLA A-A-55422 A VALID NOTICE 1-2012 Adapter, Switch Actuator (for Miniature Basic Sensitive Switches)
DLA MS75093 REV A VALID NOTICE 1-2013 Adapter, Connector, Series BNC Socket Contact to GR-874 Hermorphroditic
DLA MS18199 REV C-2013 PLATE, RETAINING, RECEPTACLE ELECTRICAL CONNECTOR, FOR 34, 42, 50 AND 75 CONTACT CONNECTORS
DLA DSCC-DWG-01017 REV B-2009 CONNECTOR, PLUG, ELECTRICAL, RF, SERIES TNC, RIGHT ANGLE, FOR LOW SMOKE CABLES

German Institute for Standardization

DIN 42802:1989-07 Connector, touch proof, for electromedial application
DIN 8816:2021-04 Threaded tool adaptors for wood working machines; tool shanks and spindle ends
DIN 55058:1978-09 Spindle Noses for Adjustable Adapters; Connecting Dimensions
DIN CLC/TS 50458:2006-12 Capacitance graded outdoor bushing 52 kV up to 420 kV for oil immersed transformers; German version CLC/TS 50458:2006
DIN EN ISO 5826:2014-07 Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014); German version EN ISO 5826:2014
DIN EN ISO 5826:2014 Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014); German version EN ISO 5826:2014
DIN EN ISO 5826:2003 Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:1999); German version EN ISO 5826:2003
DIN EN 116207:1995-12 Blank detail specification: Hermetically sealed relays - For severe static environmental conditions (116205); for severe mobile environmental conditions (116206); for severe airborne environmental conditions (116207); German version EN 116205/116206/11...
DIN 69890-1:1990-08 Modular cutting tool systems; protruding lengths of adapter modules; adapter modules for spindle noses with 7/24 taper according to DIN 2079
DIN 43627:2018-12 House connection boxes for underground services for HRC-fuses size 00 up to 100 A, 500 V and size 1 up to 250 A, 500 V
DIN 7433:1978 Adapters for Hexagon Insert Bits for Use with Spiral Ratchet Drivers
DIN 975:1986 Threaded rods (not intended for new designs)
DIN 33408-1:2008-03 Body templates - Part 1: For seats of all kinds
DIN EN ISO 14284:2023-04 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:2022); German version EN ISO 14284:2022

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE SYSTEMS AND EQUIP IP CH 29-2012 AIR CLEANERS FOR PARTICULATE CONTAMINANTS

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 24-2004 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 24-2004 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 29-2012 AIR CLEANERS FOR PARTICULATE CONTAMINANTS
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 29-2012 AIR CLEANERS FOR PARTICULATE CONTAMINANTS
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 24-2000 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 24-1996 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 28-2008 AIR CLEANERS FOR PARTICULATE CONTAMINANTS
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 24-2000 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 28-2008 AIR CLEANERS FOR PARTICULATE CONTAMINANTS

Japanese Industrial Standards Committee (JISC)

JIS C 9323:1999 Electric resistance welding -- Transformers -- General specifications applicable to all transformers
JIS C 9323:2022 Resistance welding equipment -- Transformers -- General specifications applicable to all transformers
JIS T 15004-1:2013 Ophthalmic instruments -- Fundamental requirements and test methods -- Part 1: General requirements applicable to all ophthalmic instruments
JIS T 15004-1:2022 Ophthalmic instruments -- Fundamental requirements and test methods -- Part 1: General requirements applicable to all ophthalmic instruments

US-FCR

FCR FED H-08-4 VOL 1 70J-1974 CABINET TYPE 11A (INSTRUMENT) (FOR ALTERATION PROJECTS ONLY)
FCR UFGS-28 40 01-2006 WATCHTOUR SYSTEM [FOR BRIG FACILITIES]

American Society of Mechanical Engineers (ASME)

ASME B5.11-1964(R2018) Spindle Noses and Adjustable Adaptors for Multiple Spindle Drilling Heads

ZA-SANS

SANS 10108:2005 The classification of hazardous locations and the selection of apparatus for use in such locations
SANS 5826:2004 Resistance welding equipment - Transformers - General specifications applicable to all transformers

European Committee for Electrotechnical Standardization（CENELEC）

CLC/TS 50458:2006 Capacitance graded outdoor bushing 52 kV up to 420 kV for oil immersed transformers
EN IEC 60076-22-8:2021 Power transformers - Part 22-8: Power transformer and reactor fittings - Devices suitable for use in communication networks

European Committee for Standardization (CEN)

EN ISO 5826:2014 Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014)
CWA 17857:2022 Lens-based adaptor system for coupling fibre optic to infrared semiconductor lasers
EN ISO 5826:2003 Resistance Welding Equipment - Transformers - General Specifications Applicable to All Transformers ISO 5826:1999
EN ISO 15004-1:2020 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)

Korean Agency for Technology and Standards (KATS)

KS B 6380-2023 End fittings and adapters for hydraulic hose assemblies
KS C 4315-1998(2018) A bushing for anti-pollution type of single bushing pole transformer
KS C IEC 61297-2003(2008) Industrial-process control systems－Classification of adaptive controllers for the purpose of evaluation
KS Q ISO 8423:2015 Sequential sampling plans for inspection by variables for percent nonconforming(known standard deviation)
KS Q ISO 8423:2009 Sequential sampling plans for inspection by variables for percent nonconforming(known standard deviation)
KS C ISO 5826:2021 Resistance welding equipment — Transformers —General specifications applicable to all transformers
KS P ISO 15004-1-2023 Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments
KS C IEC 61297-2013 Industrial-process control systems－Classification of adaptive controllers for the purpose of evaluation
KS C 7009-1974 CONNECTORS BY DIFFERENT KINDS AND SHAPE FOR Radio-frequency CODES

RU-GOST R

GOST 31590.1-2012 Ophtnalmic instruments. Part 1. General requirements applicable to all ophthalmic instruments and test methods
GOST R 53518-2009 Ophtnalmic instruments. Part 1. General requirements applicable to all ophthalmic instruments and test methods
GOST R IEC 61297-2017 Industrial-process control systems. Classification of adaptive controllers for the purpose of evaluation

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T L.1000 SPANISH-2011 Universal power adapter and charger solution for mobile terminals and other hand-held ICT devices
ITU-T L.1000 FRENCH-2011 Universal power adapter and charger solution for mobile terminals and other hand-held ICT devices

CEN - European Committee for Standardization

PD CEN/TR 17245:2018 Water quality - Technical report for the routine sampling of benthic diatoms from rivers and lakes adapted for metabarcoding analyses
EN ISO 15004-1:2006 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C37.27-2008 IEEE Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses - Redline

US-CFR-file

CFR 34-77.1-2013 Education. Part77:Definitions that apply to department regulations. Section77.1:Definitions that apply to all department programs.

ES-AENOR

UNE 43-510-1986 Textile glass. Widely applicable sample methods
UNE 25 102 Wheel rim profile for railways with a width of 1 meter (the same applies to railways with widths that differ by less than ten percent)

Lithuanian Standards Office

LST EN 116205/206/207-2002 Blank detail specification: Hermetically sealed relays. For severe static environmental conditions (116205). For severe mobile environmental conditions (116206). For severe airborne environmental conditions (116207)
LST EN ISO 5826:2004 Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:1999)

IETF - Internet Engineering Task Force

RFC 4682-2006 Multimedia Terminal Adapter (MTA) Management Information Base for PacketCable-and IPCablecom-Compliant Devices

KR-KS

KS C ISO 5826-2021 Resistance welding equipment — Transformers —General specifications applicable to all transformers

(U.S.) Telecommunications Industries Association

TIA/EIA/IS-788-1999 Connector Specification for the Portable Phone Vehicle Interface

GM North America

GM GM9901P-2011 Adhesive Sample Preparation for Metallic Substrates (Issue 5; Do Not Use on New Programs; No Replacement)

CZ-CSN

CSN ISO 3951:1993 Sampling procedures and charts for inspection by variables for percent nonconforming

IMO - International Maritime Organization

DI200E-2012 IMDG Code for Windows (V11)

American Society for Testing and Materials (ASTM)

ASTM D5358-93(2003) Standard Practice for Sampling with a Dipper or Pond Sampler
ASTM A151-35 Specification for Steel Suitable for Fusion Welding
ASTM C702-98 Standard Practice for Reducing Samples of Aggregate to Testing Size

GOSTR

GOST R 58588-2019 Sampling and preparation of plant samples for isotopic analysis
GOST R 59210-2020 Test code for machine tools. Part 11. Measuring instruments suitable for machine tool geometry tests
GOST R 58586-2019 Sampling and preparation of soil samples for isotopic analysis

International Electrotechnical Commission (IEC)

IEC TR 60996:1989 Method for verifying accuracy of tan delta measurements applicable to capacitors
IEC 60076-22-8:2021 Power transformers - Part 22-8: Power transformer and reactor fittings - Devices suitable for use in communication networks

IN-BIS

IS 6345-1971 Coal Sampling Methods for Float and Sink Analysis

Aeronautical Radio Inc.

ARINC 542A-1988 Digital Flight Data Recorder

American National Standards Institute （ANSI)

ANSI/ASTM E1671-1995A Classification for Serviceability of an Office Facility for Cleanliness
ANSI/ASTM E1671:1995 Classification for Serviceability of an Office Facility for Cleanliness (04.11)