surface area vs.

surface area vs., Total:262 items.

The international standard classification for "surface area vs." includes: Auxiliary materials and additives for plastics , Mineral and metal fibres , Cement. Gypsum. Lime. Mortar , Surface active agents , Radiation protection , Fasteners in general , Powder metallurgy , Chemical analysis of metals , Iron ores , Physicochemical methods of analysis , Other products of the chemical industry , Rubber compounding ingredients .

The Chinese standard classification for "surface area vs." includes: Office supplies and office implements , Carbon black , Building material raw material ore , Cement , Petroleum products in general , Radiation protection detection and evaluation , Radiation protection instrument , Fastener , Basic standards and general methods for surface active agent , Powder metallurgy analysis method , Metal physical property test method , Iron ore , Basic standards and general methods for synthetic resin and plastic , Basic standards and general methods for catalyst , Basic standards and general methods for chemical additive , Special ceramics .

Professional Standard - Education

JY 0307-1991 Demonstsatos for showing the edge Lines and the area of the cuboid

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10722-2003 Carbon black - Determination of total and external surface area by nitrogen adsorption
GB/T 8074-2008 Testing method for specific surface of cement—Blaine method
GB/T 13390-1992 Metallic powder－Determination of the specific surface area－Method of nitrogen adsorption
GB/T 15222-1994 Evaluation of surface contamination－Part 2: Tritium surface contamination
GB/T 14056.2-2011 Evaluation of surface contamination—Part 2:Tritium surface contamination
GB/T 8074-2008(英文版) Testing method for specific surface of cement—Blaine method
GB/T 6646.4 COR-1986 Method for specific surface area of chrysotile asbestos COR
GB/T 10722-2014 Carbon black—Determination of total and external surface area—Nitrogen adsorption test method
GB/T 51025-2016 Technical Specification for Seamless Construction of Super Large Area Concrete
GB/T 16823.1-1997 Stress area and bearing area for theraded fasteners
GB/T 207-1963 Method of determination for specific surface of cement
GB/T 3780.5-2002 Carbon black used in rubber products--Determiantion of specific surface area--CTAB test method
GB/T 10322.9-2023 Iron ores—Determination of specific surface area—Test method using air-permeability apparatus (Blaine)
GB/T 13390-2008 Metallic powder-Determination of the specific surface area - Method of nitrogen adsorption
GB/T 11985-1989 Surface active agents--Determination of interfacial tension--Drop volume method
GB/T 6646.4-1986 Method for specific surface area of chrysotile asbestos
GB/T 5816-1995 and adsorbents-Determination of surface area
GB/T 8997-2008 Calibration for alpha beta and alpha/beta surface contamination meters and monitors
GB/T 8074-1987 Testing method for specific surface of cement; Blaine method
GB/T 6373-2003 Surface active agents--Determination of apparent density--Method by measuring the mass of a given volume
GB/T 3780.5-2008 Carbon black - Part 5：Determination of specific surface area-CTAB test method

Taiwan Provincial Standard of the People's Republic of China

CNS 12424-1988 Method of Test for Specific External Surface of Pulp
CNS 12355-1988 Contrast of MCM Gage to Diameter and Section Area
CNS 12354-1988 Contrast of Wire Gauge to Diameter and Section Area
CNS 6590-1980 Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections Part II: Representation of Sedimentary Rocks

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40139-2021 Measuring method for surface areas of materials—Three dimensional area measurement base on hyperspectral imaging
GB/T 38691-2020 Testing method for specific surface area of petroleum refining catalysts

Professional Standard - Chemical Industry

HG/T 6138-2023 Specific surface area and pore size analyzer

Group Standards of the People's Republic of China

T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method
T/QGCML 2979-2024 Highly dispersed and large specific surface area zinc oxide
T/ZSA 110-2022 Specific surface area and pore size analyzer

Professional Standard - Nuclear Industry

EJ/T 979-1995 Accumulation method for determination of surface radon exhalation rate

Professional Standard - Petrochemical Industry

SH/T 0571-1993 Determination method for zeolite surface area in catalyst

National Metrological Verification Regulations of the People's Republic of China

JJG(建材) 107-1999 Verification regulation for determination specific surface area of air permeability apparatus

Professional Standard - Energy

NB/SH/T 0571-2021 Standard test method for determining microspore volume and zeolite area of a catalyst

Professional Standard - Agriculture

126药典四部-2020 0900 Property inspection method 0991 Specific surface area measurement method

Professional Standard - Military and Civilian Products

WJ 2250-1994 Verification Regulations for Activated Carbon Specific Surface Area Meter

Professional Standard - Building Materials

JC/T 995-2006 Zirconia powder with low specific surface area and better sinter ability

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 3780.5-2017 Carbon black-Part 5:Determination of specific surface area-CTAB test method

European Committee for Standardization (CEN)

HD 379 S1-1979 Area exposure product meter
EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
EN ISO 25178-2:2022 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture
prEN 984-1992 Determination of the mass per unit area of the use surface of needled floorcoverings
FprEN ISO 25178-2:2021 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO/FDIS 25178-2:2021)
EN 984:1995 Determination of the Mass per Unit Area of the Use Surface of Needled Floor Coverings
EN 984:2001 Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings

Standard Association of Australia （SAA）

AS 1377.2:1973 Conversion tables - Area
AS 2879.4:1991 Alumina - Determination of specific surface area by nitrogen adsorption

International Organization for Standardization (ISO)

ISO 18852:2012 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
ISO 18852:2005 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
ISO 18852:2015 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
ISO 23604:2022 Method of determining specific surface area of coal
ISO 9101:1987 Surface active agents; Determination of interfacial tension; Drop volume method
ISO 6810:1985 Rubber compounding ingredients; Carbon black; Determination of surface area; Surfactant adsorption methods
ISO 9277:1995 Determination of the specific surface area of solids by gas adsorption using the BET method
ISO 25178-73:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 73: Terms and definitions for surface defects on material measures
ISO 9277:2022 Determination of the specific surface area of solids by gas adsorption — BET method

British Standards Institution (BSI)

BS ISO 18852:2012 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
BS ISO 18852:2015 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
BS EN ISO 25178-600:2019 Geometrical product specifications (GPS). Surface texture: Areal - Metrological characteristics for areal topography measuring methods
BS EN ISO 25178-2:2022 Geometrical product specifications (GPS). Surface texture: Areal. Terms, definitions and surface texture parameters
BS EN ISO 25178-2:2012 Geometrical product specifications (GPS). Surface texture. Areal. Terms, definitions and surface texture parameters
BS ISO 23604:2022 Method of determining specific surface area of coal
BS EN ISO 25178-700:2023 Geometrical product specifications (GPS). Surface texture: Areal - Calibration, adjustment and verification of areal topography measuring instruments
BS EN ISO 25178-73:2019 Geometrical product specifications (GPS). Surface texture: Areal - Terms and definitions for surface defects on material measures
BS EN ISO 25178-71:2017 Geometrical product specifications (GPS). Surface texture: Areal. Software measurement standards
BS 4359-4:1995 Determination of the specific surface area of powders - Recommendations for methods of determination of metal surface area using gas adsorption techniques
21/30425566 DC BS ISO 23604. Method of determining specific surface area of coal
BS 6233:1982 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
19/30397789 DC BS EN ISO 25178-2. Geometrical product specifications (GPS). Surface texture: Areal. Part 2. Terms, definitions and surface texture parameters
20/30404177 DC BS EN ISO 25178-700. Geometrical product specifications (GPS). Surface texture: Areal. Part 700. Calibration, adjustment and verification of areal topography measuring instruments

BR-ABNT

ABNT MB-490-1972 Volume resistance and surface resistance detection of insulating materials

South African Bureau of Standard

SANS 5748:2010 Specific surface of cement
SANS 5748:2006 Specific surface of cement

CZ-CSN

CSN 72 2114-1970 Determination of specific surface of cement
CSN 44 1818-1987 Iron ore concentrates, Method of determination of specific surface

RU-GOST R

GOST 10898.5-1984 Ion-exchange resins. Determination of specific surface
GOST R 50097-1992 Surface active agents. Determination of interfacial tension. Drop volume method
GOST 13144-1979 Graphite. Methods for the determination of specific surface
GOST R IEC 580-1995 Area exposure product meter

GSO

GSO ISO 18852:2014 Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
OS GSO ISO 18852:2014 Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
GSO ISO 25178-1:2021 Geometrical product specifications (GPS) — Surface texture: Areal — Part 1: Indication of surface texture
BH GSO ISO 25178-1:2022 Geometrical product specifications (GPS) — Surface texture: Areal — Part 1: Indication of surface texture
GSO ISO 9101:2013 Surface active agents - Determination of interfacial tension - Drop volume method
OS GSO ISO 9101:2013 Surface active agents - Determination of interfacial tension - Drop volume method
BH GSO ISO 9101:2016 Surface active agents - Determination of interfacial tension - Drop volume method
BH GSO ISO 25178-600:2022 Geometrical product specifications (GPS) — Surface texture: Areal — Part 600: Metrological characteristics for areal topography measuring methods
GSO ISO 25178-600:2021 Geometrical product specifications (GPS) — Surface texture: Areal — Part 600: Metrological characteristics for areal topography measuring methods
BH GSO ISO 25178-2:2016 Geometrical product specifications (GPS) - Surface texture: Areal -- Part 2: Terms, definitions and surface texture parameters
GSO ISO 25178-2:2013 Geometrical product specifications (GPS) - Surface texture: Areal -- Part 2: Terms, definitions and surface texture parameters
GSO ISO 25178-73:2021 Geometrical product specifications (GPS) — Surface texture: Areal — Part 73: Terms and definitions for surface defects on material measures
BH GSO ISO 25178-73:2022 Geometrical product specifications (GPS) — Surface texture: Areal — Part 73: Terms and definitions for surface defects on material measures
BH GSO ISO 25178-3:2017 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 3: Specification operators
OS GSO ISO 9277:2013 Determination of the specific surface area of solids by gas adsorption -- BET method
BH GSO ISO 9277:2016 Determination of the specific surface area of solids by gas adsorption -- BET method
GSO ISO 25178-72:2021 Geometrical product specifications (GPS) — Surface texture: Areal — Part 72: XML file format x3p
OS GSO ISO 25178-71:2015 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 71: Software measurement standards

American Society for Testing and Materials (ASTM)

ASTM D6556-19a Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-19 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-03 Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D3663-99 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D6556-02 Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-21 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-09 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-02a Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM UOP944-96 Surface Area of Fresh and Regenerated Catalyst
ASTM D6556-17 Standard Test Method for Carbon Black&x2014Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-14 Standard Test Method for Carbon Blackmdash;Total and External Surface Area by Nitrogen Adsorption
ASTM UOP425-86 Surface Area, Pore Volume and Pore Diameter of Porous Substances by Nitrogen Adsorption
ASTM D1993-03(2008) Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D1331-11 Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
ASTM D1331-89(1995) Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
ASTM D1331-89(2001) Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
ASTM C946-91(1996)e1 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
ASTM C946-91(2001) Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
ASTM D1993-03 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM RR-D32-1031 1992 D3663-Standard Test Method for Surface Area of Catalysts
ASTM RR-D32-1006 1983 D3663-Standard Test Method for Surface Area of Catalysts
ASTM D1993-03(2013) Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM B699-86(2003) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
ASTM D3037-93 Standard Test Methods for Carbon Black—Surface Area by Nitrogen Adsorption
ASTM B633-15 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM B633-98 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM B633-98e1 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

Association Francaise de Normalisation

NF T45-023*NF ISO 18852:2015 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
NF T73-062*NF ISO 9101:1988 Surface active agents. Determination of interfacial. Drop volume method.
NF ISO 9101:1988 Surfactants - Determination of interfacial tension - Drop volume method
NF EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface condition: surface - Part 1: indication of surface conditions
NF E05-031-2*NF EN ISO 25178-2:2022 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2 : terms, definitions and surface texture parameters
NF B56-013:1980 Fibragglo panels - Determination of density and surface mass
NF C32-018:1993 Conductors for wires and cables with small cross-sectional areas
NF G35-045:1995 DETERMINATION OF THE MASS PER UNIT AREA OF THE USE SURFACE OF NEEDLED FLOOR COVERINGS. (EUROPEAN STANDARD EN 984).
NF EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface finish: surface - Part 6: classification of surface finish measurement methods
NF EN ISO 25178-600:2019 Geometrical product specifications (GPS) - Surface finish: Surface - Part 600: metrological characteristics for surface topography measurement methods
NF G35-045*NF EN 984:2002 Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings.
NF EN ISO 18757:2006 Technical ceramics - Determination of the specific surface area (mass area) of ceramic powders by gas adsorption using the BET method
NF EN ISO 19712-1:2013 Plastics - Solid decorative surface covering materials - Part 1: classification and specifications
NF EN ISO 25178-70:2014 Geometrical product specifications (GPS) - Surface finish: surface - Part 70: materialized measurements

German Institute for Standardization

DIN 277-2:1981 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)
DIN 277-2:2005 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)
DIN 277-2:1987 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)
DIN EN ISO 25178-1:2016-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016); German version EN ISO 25178-1:2016
DIN EN ISO 25178-600:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019); German version EN ISO 25178-600:2019
DIN EN ISO 25178-6:2010-06 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010); German version EN ISO 25178-6:2010
DIN EN ISO 25178-2:2012-09 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012); German version EN ISO 25178-2:2012 / Note: To be replaced by DIN EN ISO 25178-2 (2020-02).
DIN EN ISO 25178-2 E:2008-03 Geometric Product Specification (GPS) Surface Texture: Area Part 2: Terminology, Definitions and Surface Texture Parameters (Draft)
DIN 277:2021-08 Areas and volumes in building construction
DIN EN ISO 25178-2:2023 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
DIN EN ISO 25178-70:2014-06 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014); German version EN ISO 25178-70:2014
DIN EN ISO 25178-3:2012-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012); German version EN ISO 25178-3:2012
DIN EN ISO 25178-700:2023 Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022)
DIN ISO 9277:2014-01 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
DIN EN ISO 25178-603 E:2009-09 Product Geometric Specifications (GPS) Surface Texture: Area Part 603: Non-Contact (Draft)
DIN EN ISO 25178-73:2019-10 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019); German version EN ISO 25178-73:2019
DIN 66133:1993 Determination of pore volume distribution and specific surface area of solids by mercury intrusion

KR-KS

KS C IEC 60580-2023 Medical electrical equipment — Dose area product meters
KS B ISO 25178-1-2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 1: Indication of surface texture
KS B 0249-2003(2023) Effective cross-sectional area of the screw and load area of the seating surface
KS B ISO 25178-2-2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
KS C IEC 60580-2018 Medical electrical equipment — Dose area product meters
KS A ISO 4069-2001 Building and civil engineering drawings－Representation of areas on sections and views－General principles
KS A ISO 9277-2024 Determination of the specific surface area of solids by gas adsorption — BET method

SCC

BS ISO 18852:2005 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
DANSK DS/EN ISO 25178-1:2016 Geometrical product specifications (GPS) – Surface texture: Areal – Part 1: Indication of surface texture
CAN 2-200.2-M79-1979 Model of the common useful surface area for P4 and A4 format paper
CAN/CGSB 69.34-93/ANSI/BHMA A156.18-1987 Materials and finishes
DANSK DS/ISO 25178-600:2019 Geometrical product specifications (GPS) – Surface texture: Areal – Part 600: Metrological characteristics for areal-topography measuring methods
DANSK DS/EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture
DANSK DS/EN ISO 25178-2:2012 Geometrical product specifications (GPS) – Surface texture: Areal – Part 2: Terms, definitions and surface texture parameters
NS-EN ISO 25178-1:2016 Geometrical product specifications (GPS) — Surface texture: Areal — Part 1: Indication of surface texture (ISO 25178-1:2016)
ISO 18852:2005/DAmd 1 Rubber compounding ingredients — Determination of nitrogen adsorption surface area (NSA) and statistical thickness surface area (STSA) by multi-point method — Amendment 1
13/30213519 DC BS EN ISO 25178-1. Geometrical product specifications (GPS). Surface texture: Areal. Part 1. Indication of surface texture
CAN 2-115.18-M85-1985 Air filters, large surface area, medium efficiency panel type
BS EN 984:1995 Determination of the mass per unit area of the use surface of needled floor coverings
NS-EN 984:1995 Determination of the mass per unit area of the use surface of needled floor coverings
NS-EN ISO 25178-600:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)
DANSK DS/EN ISO 25178-600:2019 Geometrical product specifications (GPS) – Surface texture: Areal – Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)
NS-EN ISO 25178-6:2010 Geometrical product specifications (GPS) — Surface texture: Areal — Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010)
DIN EN ISO 25178-1 E:2013 Draft Document - Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO/DIS 25178-1:2013); German version prEN ISO 25178-1:2013
DANSK DS/ISO 128-50:2002 Technical drawings – General principles of presentation – Part 50: Basic conventions for representing areas on cuts and sections
NS-EN ISO 25178-2:2012 Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
DANSK DS/ISO 25178-73:2019 Geometrical product specifications (GPS) – Surface texture: Areal – Part 73: Terms and definitions for surface defects on material measures
AENOR UNE-EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
DANSK DS/EN ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures
DANSK DS 13000:2007 Opmåling af bygninger, areal- og volumenbegreber
NS 3940:1979 Areas and volumes of buildings
NS 3940:1986 Areas and volumes of buildings
07/30174208 DC BS ISO/DIS 25178-2. Geometrical product specifications (GPS). Surface texture: Areal. Part 2. Terms, definitions and surface texture parameters
DANSK DS/EN ISO 25178-3:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators
07/30154358 DC DD ISO/TS 25178-6. Geometrical product specifications (GPS). Surface texture: Areal. Part 6. Classification of methods for measuring surface texture
BS 4359-2:1971 Determination of the specific surface area of powders. Recommended air permeability methods
NS 3940:2007 Areas and volumes of buildings
DANSK DS/EN ISO 25178-73:2019 Geometrical product specifications (GPS) – Surface texture: Areal – Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
NS-EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)

Korean Agency for Technology and Standards (KATS)

KS B ISO 25178-1:2017 Geometrical product specifications(GPS) — Surface texture: Areal — Part 1: Indication of surface texture
KS B ISO 25178-1-2022 Geometrical product specifications(GPS) — Surface texture: Areal — Part 1: Indication of surface texture
KS M ISO 9101:2007 Surface active agents-Determination of interfacial tension-Drop volume method
KS M ISO 9101:2013 Surface active agents－Determination of interfacial tension－Drop volume method
KS M ISO 9101-2007(2008) Surface active agents－Determination of interfacial tension－Drop volume method
KS B 0249-1988 Stress area and bearing area for threaded fasteners
KS B 0249-2003 Stress area and bearing area for threaded fasteners
KS B ISO 7181-2013 Hydraulic fluid power－Cylinders－Bore and rod area ratios
KS C IEC 60580:2018 Medical electrical equipment — Dose area product meters
KS B 0249-2003(2018) Effective cross-sectional area of the screw and load area of the seating surface
KS M 1429-2004 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS C 6111-4-2007 Homogeneity in the surface resistance of large high-Tc superconductor films at microwave frequencies
KS A ISO 4069:2001 Building and civil engineering drawings－Representation of areas on sections and views－General principles
KS A ISO 4069:2006 Building and civil engineering drawings－Representation of areas on sections and views－General principles
KS A 0094-2019 Determination of the specific surface area of powders(solids) by gas adsorption method
KS B 5323-2009 Variable area flowmeters

Japanese Industrial Standards Committee (JISC)

JIS B 0681-1:2023 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 1: Indication of surface texture
JIS K 6217-7:2008 Carbon black for rubber industry -- Fundamental characteristics -- Part 7: Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
JIS K 6217-7:2013 Carbon black for rubber industry -- Fundamental characteristics -- Part 7: Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
JIS Z 8830:2001 Determination of the specific surface area of powders (solids) by gas adsorption method
JIS Z 8830:1990 Determination of the specific surface area of powders by gas adsorption methods

Spanish Association for Standardization (UNE)

UNE-EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
UNE-EN ISO 25178-600:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 25178-2:2023 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
UNE 82-315 Pt.1-1986 Surface roughness. Glossary of terms. Part 1: Area and related parameters
UNE-EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
UNE-EN ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 25178-2:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
UNE 22164:1994 DETERMINATION OF BET SPECIFIC SURFACE FOR SEPIOLITIC MATERIALS.
UNE 55-910-1985 Surface reagents. Soap. Determination of chlorine. Volume determination

RO-ASRO

STAS 4223/2-1970 CEMENT Determination of specific surface by means of the flowmeter

BE-NBN

NBN B 06-002-1983 Building surface area and volume, definitions and measurement modes
NBN-HD 379-1994 Area exposure product meter

YU-JUS

JUS M.A1.026-1981 Sur face roghness ofindustrial products. Correlation between the surface roughness and surface finishing process
JUS C.A6.022-1982 Volumetric method for determining tin coating mass (lodine method)

Danish Standards Foundation

DS/EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters
DS/EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture
DS 2111.9:1982 Building and civil engineering drawings. Representation of areas on views and sections
DS/EN ISO 25178-3:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators

TR-TSE

TS 3496-1980 DETERMINATION OF SPECIFIC SURFACE AREA OF POWDERED ORE SAMPLES

American National Standards Institute （ANSI)

ANSI N13.12-2013 Surface and Volume Radioactivity Standards for Clearance

IPC - Association Connecting Electronics Industries

IPC TM-650 2.5.17.1A-1994 Volume and Surface Resistivity of Dielectric Materials

HU-MSZT

MSZ 21196-1958 Paint and glaze area determination

PL-PKN

PN H04930-03-1989 Metallic powders Determination of apparent density Volumeter method
PN C04422-1968 Inorganic pigment* for paints Determination ol specific area
PN H04185-1992 Refractory materials. Determination of bulk density, apparent porosity, true porosity and water absorbability

International Electrotechnical Commission (IEC)

IEC 60580:2019 Medical electrical equipment - Dose area product meters
IEC 60580:1977 Area exposure product meter

European Committee for Electrotechnical Standardization（CENELEC）

HD 379-1978 Area Exposure Product Meter

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 1301.426s:1994 Methods of test for pulp and paper - Determination of thickness and apparent bulk density or apparent sheet density

Lithuanian Standards Office

LST EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010)
LST EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)

ESDU - Engineering Sciences Data Unit

ESDU 02007 B-2009 AMOPS: computer program for the calculation of area and moments of area of planar shapes
ESDU 02007 A-2003 AMOPS: computer program for the calculation of area and moments of area of planar shapes
ESDU 02007-2002 AMOPS: computer program for the calculation of area and moments of area of planar shapes
ESDU 03005-2003 AMOPS: Computer program for the calculation of area and moments of area of planar shapes.

Building Officials and Code Administrators International(U.S.)

BOCA IOTFDC-1998 CHAPTER 7-1998 Wall Covering

IN-BIS

IS 7597-1974 Glossary of terms related to surfactants
IS 5534-1969 Method for determination of specific surface area of powdered ore samples

CEN - European Committee for Standardization

EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures

SE-SIS

SIS 83 25 17-1973 Carpets. Determination of surface pile density and pile volume ratio

Canadian General Standards Board （CGSB)

CGSB 157.2-M91-CAN/CGSB-1991 Mesure De Debit Des Liquides Dans Les Canaux Decouverts - Methodes D'Exploration Du Champ Des Vitesses

PT-IPQ

NP 1701-1980 textile. Fabric. Each unit length and surface area

NO-SN

NS 3940-2007 Areas and volumes of buildings