Flange fixed chain

Flange fixed chain, Total:79 items.

The international standard classification for "Flange fixed chain" includes: Flanges, couplings and joints .

The Chinese standard classification for "Flange fixed chain" includes: Pipeline fittings .

Professional Standard - Electron

SJ/T 10161.2-1991 Vacuum rubber seal plane flanges - Dimensions of fixed flanges

Professional Standard - Petrochemical Industry

SH/T 3404-1996 Fasteners for pipe flanges

Professional Standard - Machinery

JB/ZQ 4743-2006 Flange-fixed cylinder for metallurgical equipment (PN≤0.63MPa)

Professional Standard-Ships

CB/T 4246-2013 End fastenings for anchor chain cables on board ships

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9125-2010 Fasteners for pipe flange joints
GB/T 9125-2003 Fasteners for pipe flange joints

Professional Standard - Chemical Industry

HG 20614-1997 Steel pipe flanges, gaskets, fasteners optional regulations (European system)
HG/T 20635-2009 Specification for Selection of Steel Pipe Flanges, Gaskets and Bolting (Class designated)
HG 20614-1997（编制说明） Steel pipe flanges, gaskets, fasteners optional regulations (European system)
HG 20635-1997 Steel pipe flanges, gaskets, fasteners optional regulations (American system)
HG 20635-1997（编制说明） Steel pipe flanges, gaskets, fasteners optional regulations (American system)

Professional Standard - Energy

NB/T 47027-2012 Stud bolts & nuts for body flange

Defense Logistics Agency

DLA MS20756 REV F (1)-2012 FLANGE, SWIVEL, RETAINING
DLA MS20756 REV D-2008 FLANGE, SWIVEL, RETAINING
DLA MS20756 REV E-2009 FLANGE, SWIVEL, RETAINING
DLA MIL-DTL-24044/1 C-2011 FLANGES, FIXED, COAXIAL LINE, RIGID
DLA MS20757 REV C-2013 CONNECTOR, FIXED FLANGE, TO HOSE

Türk Standardları Enstitüsü

TS 818-1971 FLANGES SECURED BY ROLLING

Ente Nazionale Italiano di Unificazione

UNI 2231:1943 Normal pipe flanges. Checkout calculation for fixed flanges.
UNI 9518:1989 Fasteners. Dog point with truncated come end for hexagon bolt with flange.

Czech Standards Institute (UNMZ)

CSN 10 7221-1980 Fixed flanges for vacuum connections
CSN 69 0010 Cast.4.18-1990 Stationary pressure vessels. Technical ules. Design. Flanged connections
CSN 47 0210-1983 PTO joint shafts with casing. Flanges. Joining sizes.

Korean Agency for Technology and Standards (KATS)

KS B 1551-2003 Rigid flanged shaft couplings
KS B 1551-2003(2023) Flanged fixed shaft coupling

U.S. Air Force

AIR FORCE MS20757 REV B-1975 CONNECTOR, FIXED FLANGE, TO HOSE

Military Standards (MIL-STD)

MIL MIL-DTL-24044/1C-2011 Flanges, Fixed, Coaxial Line, Rigid
MIL MIL-DTL-24044/1B-2000 FLANGES, FIXED, COAXIAL LINE, RIGID (SUPERSEDING MIL-F-24044/1A)

Finnish Standards Institute

SFS B.8.83-1984 Fixed flange in steel pipe
SFS B.8.81-1948 Fixed flange in steel cast pipe
SFS B.8.71-1934 Fixed flange in cast iron pipe
SFS B.8.85-1948 Fixed flange in vafu steel pipe
SFS B.8.83-1948 Flange. Fixed flange in steel cast pipe. Maximum working pressure: I-25, II-20 and III-20 kg/cm2
SFS 5172-1986 plastic pipe. FRP pipes and accessories. Fixed flange PN16
SFS 2170-1967 Single flange, flange plate and flange shoulder. Rated pressure PN10
SFS 2169-1967 Single flange, flange plate and flange shoulder. Rated pressure PN6
SFS B.8.47-1959 Fixed flange placed in pressure-bearing cast iron pipes and ordinary pipes

American Association of State Highway and Transportation Officials

DIVISION I 9.25-1996 Flange Reinforcement

Association Francaise de Normalisation

NF E63-117:2008 Tools for pressing - Retainers for flanged punches - Reduced retainers

ADS AS1876-1879 Hinges (Aluminium Alloy Single Flange Plates)
ADS AS1880-1881 Hinges (Aluminium Alloy Double Flange Plates)
ADS AS1854-1857 Hinges (Aluminium Alloy Single Flange Plates)
ADS AS1858-1859 Hinges (Aluminium Alloy Double Flange Plates)

German Institute for Standardization

DIN 86059:1976-08 Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10
DIN 3017-5 E:2022-12 Draft Document - Hose clamps - Part 5: Wide strip hose clamps with fastening lugs, shapes D and E

Society of Automotive Engineers (SAE)

SAE AGS981-5-1975 AGS981 Female Flanges. (Bolted.) (Steel)
SAE AS3394-4-1932 AS3394 Retaining Link
SAE AS1858-7 AS1858-1859 Hinges. Aluminium Alloy Double Flange Plates
SAE AS1880-14-1995 AS1880-1881 Hinges (Aluminium Alloy Double Flange Plates)
SAE AS1854-7 AS1854-1857 Hinges (Aluminium Alloy Single Flange Plates)
SAE AS1880-14 AS1880-1881 Hinges (Aluminium Alloy Double Flange Plates)
SAE AS1858-7-1942 AS1858-1859 Hinges. Aluminium Alloy Double Flange Plates
SAE AS1876-12 AS1876-1879 Hinges, Aluminium Alloy, Single Flange Plates
SAE AS4847B-2018 Shank Nuts@ Captive Blind Fastener@ Mating Retaining Flange@ Design Standard For
SAE AS4847-1994 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard for
SAE AS4847-2004 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For
SAE AS4847A-2012 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For
SAE AS4847B-2023 Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For
SAE AS4751/3 Flange End, Solid, Wide, Design Standard
SAE AS6369/3 FLANGE END, SOLID, WIDE, DESIGN STANDARD

Polski Komitet Normalizacyjny (PKN)

PN H74302-1968 Pipelines and ?ixtures S?uds for flanged join?s
PN M43815-02-1986 Vacuum joints langes of bakable ixed joints
PN M54909-1988 Flange fasteners for water meters
PN H74303-1968 Pipelines and fixtures High hexagon nuts for flanged join?s

British Standards Institution (BSI)

BS 87-2:1931 Airscrew hubs and their fixings. Engine flange fixings
BS EN 1591-1+A1:2001 Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method
BS EN 1591-1:2013 Flanges and their joints. Design rules for gasketed circular flange connections. Calculation

Swiss Association for Standardization (SNV)

SNV 81161-1952 Technical drawings — Geometrical tolerancing Tolerancing of form, orientation, location and run-out Generalities, definitions, Symbols, indications on drawings

Standards Norway

NS 2537-1982 Marine industry - Set-on flanges - Nominal pressure PN 10
NS 2538:1982 Marine industry — Set-on flanges — Nominal pressure PN 16
NS 2538-1982 Marine industry - Set-on flanges - Nominal pressure PN 16
NS 2537:1982 Marine industry — Set-on flanges — Nominal pressure PN 10

National Standardisation Body (ASRO)

STAS 6778-1975 Bicycle.s FIXED SPROCKET

Spanish Association for Standardization (UNE)

UNE 18084:1959 FIXED BUSHS CHAIN. SPECIFICATIONS.

Gosstandart of Russia

GOST 30676-2000 Circular grinding machines. Flanges for mounting of grinding wheels. Construction and dimensions

Swedish Institute for Standards

SS-EN 4801:2017 Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, in heat resisting steel - Inch series
SS-EN 4802:2017 Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, in nickel alloy - Inch series
SS-EN 4804:2017 Aerospace series - Flange couplings - Swivel flange with 4 fastening holes, in nickel alloy - Inch series