hot water time

hot water time, Total:155 items.

The international standard classification for "hot water time" includes: Domestic electrical appliances in general , Electric heaters , Switches , Occupational safety. Industrial hygiene , Lubricants, industrial oils and related products , Adhesives .

The Chinese standard classification for "hot water time" includes: Household electric heating appliances , Switch , Papermaking in general , Human Engineering , Lubricating oil , Basic standards and general methods for adhesives .

国家能源局

NB/T 11041-2022 Specification for built-in zero-cold water system of air-source heat pump water heater

Group Standards of the People's Republic of China

T/DZJN 92-2022 Instant electric water heater
T/DZJN 56-2021 Portable instant-heating water dispenser
T/CNHA 1051-2022 Assessment requirements for symbiosis & superior products— Domestic gas instantaneous water heater
T/FSS 20-2021 Foshan Standard Domestic gas instantaneous water heater with circulating preheating function
T/ZZB 1399-2019 Instantneous heating water dispenser
T/CECA G 0092-2020 Room type air source heat pump water heater
T/CNHA 1024-2020 Assessment requirements for forerunner standard—Domestic gas instantaneous water heater

Professional Standard - Electron

SJ/Z 9010.8-1987 Measurements of electrical properties of electronic tubes and valves--Part 8: Measurement of cathode heating time and heater warm-up time

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7287.4-1987 Measuring method for temperature rise time and fall time of infrared heater
GB/T 14280-1993 Thermal time delay switch, Generic specification of
GB/T 18402-2001 Pulps--Determination of drainability (dainage time method)
GB 935-1989 Limit value of allowable continuous heat exposure time in hot environment

Taiwan Provincial Standard of the People's Republic of China

CNS 11373-1985 Method of Test for Drainage Time of Pulp
CNS 786-1983 Method of Test for Time of Setting of Hydraulic Cement (by Vicat Needle)

Professional Standard - Petrochemical Industry

SH/T 0791-2007 Standard test method for measuring the effect on filterability of engine oils after treatment with various amounts of water and a long(6-h) heating time
SH/T 0772-2005 Standard test method for measuring the effect on filterability of engine oils after treatment with water and dry ice and a short heating time

未注明发布机构

DIN EN 26 E:2012-03 Gas-fired instantaneous water heaters for the production of domestic hot water
ASTM RR-E27-1005 2003 E2046-Test Method for Reaction Induction Time by Thermal Analysis
DIN EN 26:1999 Gas-fired instantaneous water heaters for the production of domestic hot water

Professional Standard - Chemical Industry

HG/T 3716-2003 Hot-met adhesives-Determining the open time

Professional Standard - Light Industry

QB/T 4098-2010 Household and similar instantneous heating water dispenser

SAE - SAE International

SAE AIR4279-1995 Heat Up Time

RU-GOST R

GOST 19438.17-1977 Low-power electronic tubes and valves. Methods of measurement of cathode heating time and readiness time
GOST 21011.5-1978 High-voltage kenotrons. Methods of measurement of cathode heatting time and readiness time controlling
GOST 26798.1-1985 Oil-well cements. Test methods of flowability, density, water-el: mination, thickening time and setting time
GOST 26798.1-1996 Oil-well cement. Test methods

YU-JUS

JUS N.R1.108-1977 Electronic tubes. Measurements of the electrical properties. Measurement of cathode heating time and heater warm-up time

KR-KS

KS M ISO 2578-2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS B 8116-2023 Gas burning instantaneous water heaters
KS K ISO 20158-2022 Textiles — Determination of water absorption time and water absorption capacity of textile fabrics

German Institute for Standardization

DIN EN ISO 2578:1998-10 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
DIN EN ISO 6416:2019-03 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017); German version EN ISO 6416:2017
DIN EN ISO 6416:2019 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017)

Korean Agency for Technology and Standards (KATS)

KS M ISO 2578:2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS M ISO 2578-2007(2017) Plastics－Determination of time－temperature limits after prolonged exposure to heat
KS B 8116-2021 Gas burning instantaneous water heaters
KS L 5103-1996 Testing method for setting time of hydraulic cement by Gilmour needles
KS B 8116-2009 Instantaneous water heaters
KS L 5108-2007 Testing method for setting time of hydraulic cement by vicat needle
KS L ISO 9597-2009(2019) Determination of setting time and soundness of cements
KS L ISO 9597:2009 Determination of setting time and soundness of cements
KS K ISO 20158:2022 Textiles — Determination of water absorption time and water absorption capacity of textile fabrics

SCC

DANSK DS/EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat
AENOR UNE-EN ISO 2578:1999 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT (ISO 2578:1993)
BS 3791:1964 Specification for clothing for protection against intense heat for short periods
BS 3791:1970 Specification for clothing for protection against intense heat for short periods
AWWA WQTC52746 ICR Microbiology Data--Temporal, Spatial and Source Water Characteristics
NS-EN ISO 2578:1998 Plastics — Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)
AENOR UNE 52003:1958 Determination of work times. Normal time and standard time.
BS PD ISO/TS 5667-25:2022 Water quality. Sampling-Guideline on the validation of the storage time of water samples
AWWA JAW39269 Journal AWWA — Time-Averaging Water Quality Assessment
SAE AMS7171A-2011 Insulation Blanket, Thermal-Acoustical (Stabilized: Sep 2011)
AWWA SOURCES59152 Indirect Potable Reuse: Its Time Has Come
DANSK DS/EN ISO 6416:2017 Hydrometry – Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017)
AENOR UNE-EN ISO 6416:2018 Hydrometry. Flow measurement by ultrasonic transmission times (volume time). (ISO 6416:2017).
AWWA QTC97003 Correlations Between Travel Time and Water Quality in a Deadend Loop
NS-EN ISO 6416:2017 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017)
IAPMO PS 92-2013 Heat Exchangers and Indirect Water Heaters
AWWA ACE94192 Hydraulic Models for Determining Detention Times in a Drinking Water Reservoir
IAPMO PS 92-2012 Heat Exchangers and Indirect Water Heaters
IAPMO PS 92-2011 Heat Exchangers and Indirect Water Heaters
ANSI Z21.10.3-2015 Gas-fired water heaters, volume III, storage water heaters with input ratings above 75,000 Btu per hour, circulating and instantaneous
ANSI Z21.10.3-2013 Gas-fired water heaters, volume III, storage water heaters with input ratings above 75,000 Btu per hour, circulating and instantaneous
ANSI Z21.10.3-2017 Gas-fired water heaters, volume III, storage water heaters with input ratings above 75,000 Btu per hour, circulating and instantaneous
VDI 2852 BLATT 3-2001 Characteristics of numerically controlled manufacturing equipment — positioning time, spindle acceleration time, waiting time
ULC 337-2004 Delayed-Action Timelocks (ULC S337)
CSA 4.3-M98:1998 Gas Water Heaters Volume IIi Storage Water Heaters, With Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous
CSA ANSI Z21.10.3-2004/CSA 4.3-2004 Gas Water Heaters - Volume III, Storage Water Heaters, With Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous
DIN EN ISO 6416 E:2016 Draft Document - Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO/DIS 6416:2015); German and English version prEN ISO 6416:2015
AATCC 199-2012 Drying Time of Textiles: Moisture Analyzer Method
AATCC 199-2011 Drying Time of Textiles: Moisture Analyzer Method
DANSK DS/ISO/TS 5667-25:2022 Water quality – Sampling – Part 25: Guideline on the validation of the storage time of water samples
CSA 4.3-2004(R2010) Gas Water Heaters - Volume III, Storage Water Heaters With Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous
CSA ANSI Z21.10.3-2011/CSA 4.3-2011 Gas Water Heaters - Volume III, Storage Water Heaters, With Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous
CSA ANSI Z21.10.3-2014/CSA 4.3-2014 Gas Water Heaters - Volume III, Storage Water Heaters, With Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous

International Organization for Standardization (ISO)

ISO 2578:1974 Plastics — Determination of time-temperature limits after exposure to prolonged action of heat
ISO 6416:2017 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method
ISO 9597:2008 Cement - Test methods - Determination of setting time and soundness
ISO 20158:2018 Textiles - Determination of water absorption time and water absorption capacity of textile fabrics
ISO/TS 5667-25:2022 Water quality — Sampling — Part 25: Guideline on the validation of the storage time of water samples

GSO

GSO ISO 2578:2015 Plastics -- Determination of time-temperature limits after prolonged exposure to heat
OS GSO IEC 60151-8:2014 Measurements of the electrical properties of electronic tubes and valves - Part 8: Measurement of cathode heating time and heater warm-up time
GSO IEC 60151-8:2014 Measurements of the electrical properties of electronic tubes and valves - Part 8: Measurement of cathode heating time and heater warm-up time
BH GSO IEC 60151-8:2016 Measurements of the electrical properties of electronic tubes and valves - Part 8: Measurement of cathode heating time and heater warm-up time

US-FCR

FCR FED H-08-4 VOL 3 SEC III 711-1993 HEATING AND VENTILATING SCHEDULES
FCR FED H-08-4 VOL 3 SEC III 710-1993 FLOWMETER, OIL HEATER, DRIP TRAP SCHEDULES

Danish Standards Foundation

DS/EN ISO 2578:1999 Plastics - Determination of time-temperature limits after prolonged exposure to heat

International Electrotechnical Commission (IEC)

IEC 60151-8:1966 Measurements of the electrical properties of electronic tubes. Part 8 : Measurement of cathode heating time and heater warm-up time
IEC 60151-8:1966/COR1:1967 Measurements of the electrical properties of electronic tubes. Part 8 : Measurement of cathode heating time and heater warm-up time; Corrigendum 1
IEC 63159-2-1:2021 Household electric instantaneous water heaters - Methods for measuring the performance - Part 2-1: Multifunctional electric instantaneous water heaters

British Standards Institution (BSI)

BS EN ISO 2578:1999 Plastics. Determination of the time-temperature limits after prolonged exposure to heat
BS EN ISO 6416:2017 Hydrometry. Measurement of discharge by the ultrasonic transit time (time of flight) method
BS EN 50193-2-1:2016 Electric instantaneous water heaters. Methods for measuring the performance. Multifunctional electric instantaneous water heaters
PD ISO/TS 5667-25:2022 Water quality. Sampling. Guideline on the validation of the storage time of water samples
BS 1566-2:1984 Copper indirect cylinders for domestic purposes - Specification for single feed indirect cylinders

Association Francaise de Normalisation

NF T51-225*NF EN ISO 2578:1998 Plastics. Determination of time-temperature limits after prolonged exposure to heat.
NF EN ISO 2578:1998 Plastics - Determination of time-temperature limits after exposure to prolonged action of heat
NF T76-117:1984 Water based adhesives. Resorcinol formaldehyde, resorcinol-phenol formaldehyde. Conventional determination of gel setting time at 23 degrees C.
NF EN ISO 6416:2017 Hydrometry - Flow measurement using the ultrasonic transit time (time of flight) method
NF X10-334*NF EN ISO 6416:2017 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method
NF ISO 20158:2019 Textiles - Determination of water absorption time and water absorption capacity of fabrics

CL-INN

INDITECNOR 2.30-31ch-1951 Measurement of cement setting time

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE LV-11-008-2011 Hot-Water Distribution System Piping Time@ Water@ and Energy Waste—Phase III: Test Results
ASHRAE CH-06-4-1-2006 Hot Water Distribution System Piping Time@ Water@ and Energy Waste - Phase 1: Test Results

Lithuanian Standards Office

LST EN ISO 2578:2002 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)

AENOR

UNE-EN ISO 2578:1999 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT (ISO 2578:1993)

AT-ON

ONORM M 7442-1982 Gas-fired instantaneous water heaters

American Society for Testing and Materials (ASTM)

ASTM D6794-02 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time
ASTM D6794-08 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time

ES-UNE

UNE-EN ISO 6416:2018 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017)

TR-TSE

TS 2448-1976 Measurements of The Electr?cal Propert?es of Electronic Tubes And Valves Part 8: Measurement of Cathode Heatmg Time And Heater Warm - Up Time

ES-AENOR

UNE 52 003 Determination of working time, standard time and time types

CZ-CSN

CSN 35 1221-1979 Non — instantaneous stationary water heaters
CSN 50 0440-1987 Determination of drying time of ink on páper

HU-MSZT

MSZ 523/3-1971 Inspection of cement bonding time characteristics
MSZ 3607/2-1971 Canned food water absorption and cooking time test

Military Standards (MIL-STD)

DOD A-A-51810-1987 TIMER, INTERVAL

RO-ASRO

STAS 3331/1-1986 TIME INTERVALS AND SCALES Main coneepts
STAS 227/4-1986 Gemen ts PIIYSICAL TESTS Setting time determinat ion

European Committee for Standardization (CEN)

EN 26:2015 Gas-fired instantaneous water heaters for the production of domestic hot water
prEN 26-1991 Gas burning appliances for instantaneous production of hot water for domestic use

TH-TISI

TIS 1693-2004 Instantaneous water heaters: safety requirements

U.S. Military Regulations and Norms

ARMY MIL-PRF-62315 C-1997 HEATER ASSEMBLY, COMBUSTION VEHICULAR COMPARTMENT, 60,000 BTU/HR
ARMY MIL-PRF-62315 C NOTICE 1-1997 HEATER ASSEMBLY, COMBUSTION VEHICULAR COMPARTMENT, 60,000 BTU/HR

PT-IPQ

NP 985-1979 milk powder. Measurement of diffusion time in water
NP 986-1979 milk powder. Measurement of diffusion time in water

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE EG 40-2002 Engineering Guideline Conversion of Time Values Between SMPTE 12M Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE EG 40-2012 Engineering Guideline Conversion of Time Values Between SMPTE 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE RP 159-1995 Vertical Interval Time Code and Longitudinal Time Code Relationship

AR-IRAM

IRAM 1619-1961 Method for determination of setting time of reinforced cement

International Telecommunication Union (ITU)

ITU-R QUESTION 2387-2001 Trusted time source for time stamp authority
ITU-R QUESTION 238/7-2001 Trusted time source for time stamp authority
ITU-R QUESTION 110-2/7-1997 Time codes
ITU-R QUESTION 110-27-1997 Time codes

IETF - Internet Engineering Task Force

RFC 3339-2002 Date and Time on the Internet: Timestamps

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

QUESTION 238/7-2001 Trusted time source for time stamp authority
QUESTION 110-2/7-1997 Time codes
ITU-R TF.583-5-2001 Time codes
ITU-R TF.583-4-1997 Time Codes
ITU-R TF.583-2-1994 Time Codes
ITU-R TF.583-3-1995 Time Codes

Underwriters Laboratories (UL)

UL 2765-2011 Indirect fired domestic hot water tanks

GB-REG

REG NASA-LLIS-0783-2000 Lessons Learned - Thermal Test Levels& Durations

CU-NC

NC 41-32-7-1985 Leather. Conglomerate. Determination of Water Absorption in Specified Time

Institute of Electrical and Electronics Engineers (IEEE)

EG 40:2002 EG 40:2002 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12M Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE EG 40:2002 EG 40:2002 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12M Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE EG 40:2012 EG 40:2012 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time
EG 40:2012 EG 40:2012 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE EG 40:2016 EG 40:2016 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE ST 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time
EG 40:2016 EG 40:2016 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE ST 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time

ITE - Institute of Transportation Engineers

CD-032-2005 Transit Despeje Intervals

United States Navy

NAVY MIL-T-82535 (1)-1969 TIMER, INTERVAL, MARK 11 MOD 2 (ASSEMBLY)
NAVY MIL-T-82535-1968 TIMER, INTERVAL, MARK 11 MOD 2 (ASSEMBLY)
NAVY MIL-T-82535 NOTICE 1-1986 TIMER, INTERVAL, MARK 11 MOD 2 (ASSEMBLY)