Smoke test cycle

Smoke test cycle, Total:82 items.

The international standard classification for "Smoke test cycle" includes: Corrosion of metals , Testing of metals , Diagnostic equipment , Fire-protection , Test conditions and procedures in general , Electrical engineering in general .

The Chinese standard classification for "Smoke test cycle" includes: Metal chemical property test method , Metal physical property test method , Medical apparatus and devices in general , Fire monitoring, alarming and fire-fighting dispatching system , Reliability and maintainability .

Professional Standard - Aviation

HB 5194-1981 Test Method of Corrosion for Periodic Infiltration
HB 5207-1982 Test Method for Metal Periodic Endurance at Elevated Temperature

Military Standard of the People's Republic of China-General Armament Department

GJB 9923-2021 Solid launch vehicle test launch cycle assessment method

Group Standards of the People's Republic of China

T/CFPA 018-2023 Smoke detectors for ducts
T/GDES 60007-2019 Environmental Management Life Cycle Assessment Sensitivity Analysis Requirements and Guidelines

未注明发布机构

SAE ARP4992B-2019 Periodic Test Plan for Processing Solutions
DIN ISO 7798 E:2017-02 Cross-country skis - Determination of fatigue indexes - Cyclic loading test

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5383.7-2005 Test methods of sensitivity and stability for pyrotechnic. Part 7: Test for explosion. 300second delay time mehtod

Professional Standard - Medicine

YY/T 0841-2023 Medical electrical equipment---Recurrent test and test after repair ofmedical electrical equipment
YY/T 0841-2011 Medical electrical equipment—Recurrent test and test after repair of medical electrical equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 5080.2 86 Equipment reliability testing Guidance for the design of test cycles
GB/T 5080.2-2012 Reliability testing - Part 2: Design of test cycles
GB 5080.2-1986 Equipment reliability testing - Guidance for the design of test cycles
GB 4715-2024 Point-type smoke detectors using scattered light, transmitted light or ionization
GB/T 5080.2-1986 Equipment reliability testing--Guidance for the design of test cycles
GB 4715-2005 Smoke Detectors—Point Detectors Using Scattered Light, Transmitted

European Committee for Standardization (CEN)

EN 15918:2011 Cycles - Cycle trailers - Safety requirements and test methods (Incorporates Amendment A1: 2013)
EN 15918:2011+A1:2013 Cycles - Cycle trailers - Safety requirements and test methods
EN 15918:2011+A2:2017 Cycles - Cycle trailers - Safety requirements and test methods
EN 15888:2014 Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing

VN-TCVN

TCVN 6668-2000 Cigarettes.Determination of cigarette circumference

International Telecommunication Union (ITU)

ITU-T N.4 FRENCH-1988 DEFINITION AND DURATION OF THE LINE - UP PERIOD AND THE PREPARATORY PERIOD
ITU-T N.4 SPANISH-1988 DEFINITION AND DURATION OF THE LINE - UP PERIOD AND THE PREPARATORY PERIOD
ITU-T M.820-1988 Periodicity of routine tests on international voice-frequency telegraph links
ITU-T M.820 SPANISH-1988 Periodicity of routine tests on international voice-frequency telegraph links
ITU-T M.820 FRENCH-1988 Periodicity of routine tests on international voice-frequency telegraph links
ITU-T M.610-1988 PERIODICITY OF MAINTENANCE MEASUREMENTS ON CIRCUITS
ITU-T M.610 FRENCH-1988 PERIODICITY OF MAINTENANCE MEASUREMENTS ON CIRCUITS
ITU-T M.610 SPANISH-1988 PERIODICITY OF MAINTENANCE MEASUREMENTS ON CIRCUITS
ITU-T N.54 FRENCH-1988 Definition and Duration of the Line-up Period and the Preparatory Period
ITU-T N.54 SPANISH-1988 Definition and Duration of the Line-up Period and the Preparatory Period

PT-IPQ

NP ISO 3402:2001 Tobacco and tobacco products Atmosphere for conditioning and testing
NP 1605-1986 Tobacco and tobacco industry products. Testing of ambient air conditions

Korean Agency for Technology and Standards (KATS)

KS A IEC 60605-2:2002 Equipment reliability testing-Part 2:Design of test cycles
KS A IEC 60605-2-2022 Equipment reliability testing－Part 2：Design of test cycles
KS M ISO 11640:2016 Leather－Tests for colour fastness－Colour fastness to cycles of to-and-fro rubbing
KS M ISO 11640:2020 Leather — Tests for colour fastness —Colour fastness to cycles of to-and-fro rubbing
KS G ISO 7798:2004 Cross-country skis－Determination of fatigue indexes－Cyclic loading test
KS R ISO 8178-9:2007 Reciprocating internal combustion engines－Exhaust emission measurement－Part 9：Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions

IEC - International Electrotechnical Commission

IEC 60295:1969 D.C. Periodmeters: Characteristics and Test Methods (Edition 1.0)

GSO

GSO IEC 60605-2:2014 Equipment reliability testing - Part 2: Design of test cycles
OS GSO IEC 60605-2:2014 Equipment reliability testing - Part 2: Design of test cycles
BH GSO IEC 60605-2:2016 Equipment reliability testing - Part 2: Design of test cycles

(U.S.) Ford Automotive Standards

FORD FLTM BQ 104-07-2000 ENVIRONMENTAL TEST CYCLES

SCC

CEI 56-18:2000 Equipment reliability testing - Part 2: Design of test cycles
AWWA WQTC65943 Measuring the Life Cycle Cost of Chloramines

SE-SIS

SIS SS 81 81 38-1986 Windows — Weather resistance - Cyclic short time testing
SIS SS 81 81 36-1986 Windows — Weather resistance — Non cyclic short time testing

CZ-CSN

CSN 56 0280 Cast.2-1982 Methods of test for fermented tobacco and tobacco products. Methods of sensory examination

American National Standards Institute （ANSI)

ANSI/EIA/TIA 455-104A:1993 Fiber Optic Cable Cyclic Flexing Test
ANSI/IEEE 338:2007 Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems

Society of Automotive Engineers (SAE)

SAE J2288-2008 Life Cycle Testing of Electric Vehicle Battery Modules
SAE J2288-2020 Life Cycle Testing of Electric Vehicle Battery Modules
SAE J2288-1997 Life Cycle Testing of Electric Vehicle Battery Modules
SAE ARP4992B-2012 Periodic Test Plan for Processing Solutions
SAE ARP4992A-2004 Periodic Test Plan for Processing Solutions

HU-MSZT

MSZ 20568-1982 Cigarette sensory testing

British Standards Institution (BSI)

BS ISO 8178-9:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transi ent conditions
BS EN ISO 11782-1:1998 Corrosion of metals and alloys - Corrosion fatigue testing - Cycles to failure testing
BS ISO 8178-9:2012 Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS ISO 8178-10:2003 Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS EN 61672-3:2013 Electroacoustics. Sound level meters. Periodic tests
BS EN 61672-3:2007 Electroacoustics - Sound level meters - Periodic tests
BS EN 12512:2001 Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners
BS EN 12512:2002 Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners

International Organization for Standardization (ISO)

ISO 8178-9:2000 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
ISO 8178-9:2012 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
ISO 8178-9:2000/Amd 1:2004 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions; Amendment 1
ISO 7798:1984 Cross-country skis; Determination of fatigue indexes; Cyclic loading test
ISO 7798:2017 Cross-country skis - Determination of fatigue indexes - Cyclic loading test
ISO 8178-10:2002 Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurements of exhaust gas smoke emissions from compression ignition engines operating under transient conditions

Underwriters Laboratories (UL)

UL 268A BULLETIN-2007 UL Standard for Safety Smoke Detectors for Duct Application

KR-KS

KS M ISO 11640-2020 Leather — Tests for colour fastness —Colour fastness to cycles of to-and-fro rubbing

Association Francaise de Normalisation

NF T51-181:1986 Plastics. Cyclical exposure. Exposure test cycles.
NF S52-709:1994 Alpine skis. Determination of fatigue indexes. Cyclic loading test.
NF E37-211-9:2012 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions

German Institute for Standardization

DIN ISO 7798:1985 Cross-country skis; determination of fatigue indexes; cyclic loading test

BE-NBN

NBN C 06-230-1977 Basic climate test and mechanical robustness test. Part 2: Test, Test Db: Humid heat periodic test (cycle: 12+12 hours)

RU-GOST R

GOST R IEC 62353-2013 Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment

(U.S.) Telecommunications Industries Association

TIA-455-104-A-1993 FOTP-104 Fiber Optic Cable Cyclic Flexing Test

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 805-1960 Proposed Test Procedure for Alternating-Current 400-Cycle-Per-Second Aircraft Induction Motors

Institute of Electrical and Electronics Engineers (IEEE)

AIEE Std No. 805 AIEE Proposed Test Procedure for Alternating-Current 400-Cycle-Per-Second Aircraft Induction Motors