Requirements for the use of testing instruments

Requirements for the use of testing instruments, Total:287 items.

The international standard classification for "Requirements for the use of testing instruments" includes: Quality management and quality assurance , Non-destructive testing , Equipment for entertainment , Protection against crime , Geology. Meteorology. Hydrology , Occupational safety. Industrial hygiene , Protection against dangerous goods .

The Chinese standard classification for "Requirements for the use of testing instruments" includes: Reliability and maintainability , Ultrasonic wave and sound radiation defectoscope , X ray, magnetic powder, fluorescent light and other defectoscope , Guard and alarm system , Hydrology and water conservancy instrument , Electrical logging simulation indicating instrument , Environmental monitoring instrument and its complete equipment , Hygiene, safety and labor protection .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37084-2018 General requirement for photoelectric detection instruments reliability
GB/T 37930-2019 Non-destructive testing instruments—Technical specifications of X-ray real-time imaging system for automobile wheel
GB/T 40023-2021 Non-destructive testing instruments - Ultrasonic time-of-flight diffraction instrument - Technical requirements

工业和信息化部

HG/T 2382-2022 General technical requirements for rubber testing instrument and equipment
JB/T 13940-2020 Nondestructive instruments - Eddy current electrical conductivity gauge
JB/T 13939-2020 Nondestructive testing instruments - Eddy current thickness gauge
JB/T 13941-2020 Nondestructive testing instrument - Remote-field eddy current testing equipment
JB/T 13938-2020 Nondestructive testing instrument- Basic requirements for penetrate testing device
JB/T 13936-2020 Nondestructive testing instrument - Technical requirements for magnetige device using in magnetic particle testing
JB/T 13935-2020 Nondestructive testing instrument - UltrasonicUltrasonic time-of-flight diffraction testing instrument
JB/T 13937-2020 Nondetructive testing instrument -Laser ultrasonic visualizing inspector

Shanxi Provincial Standard of the People's Republic of China

DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy
DB1404/T 8-2021 Instrument and equipment management requirements for inspection and testing institutions
DB1404/T 17-2021 Inspection and testing laboratory instrument analytical method validation requirements chromatography

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 36071-2018 Non-destructive testing instruments—technical requirements of X-ray real-time imaging system
GB/T 33887-2017 Non-destructive testing instruments--Industrial optical fiber endoscope detector
GB/T 33885-2017 Non-destructive testing instruments--General requirements for sampling, routine inspection and type inspection
GB/T 33886-2017 Non-destructive testing instruments--Industrial electronic endoscopic detector
GB/T 34314-2017 Code for use of dragon and lion dance sports equipment

Henan Provincial Standard of the People's Republic of China

DB4102/T 014-2020 Installation and use requirements for combustible gas detection and alarm

Military Standard of the People's Republic of China-General Armament Department

GJB 10051-2021 General requirements for non-destructive testing of weapons and equipment
GJB 6927-2009 Procedure and requirements for check and accept of military electronic measuring instruments
GJB 4235-2001 Technical requirements for spectrum measurement instruments
GJB 6926-2009 Requirement for drafting product specification of military electronic measuring instrument
GJB 7670-2012 General requirements for maintenance and storage of military photoelectric instruments
GJB 4235A-2020 Technical requirements for spectrum measurement instruments
GJB 1692-1993 Flight test instrument calibration requirements
GJB 8349-2015 General requirements for random documents for military test instruments

Professional Standard - Aviation

HB 7407-1996 Minimum performance requirements for civil aircraft carbon monoxide detectors

Hebei Provincial Standard of the People's Republic of China

DB13/T 2645-2018 General technical requirements for nitrogen trifluoride detector

Shanghai Provincial Standard of the People's Republic of China

DB31/ 579-2011 General specification for safershoe

Group Standards of the People's Republic of China

T/GDCKCJH 051-2021 Performance requirements and test method for bar code verifier
T/GDCKCJH 042-2021 Performance requirements and test methods of tapestry brick drawing instrument
T/GDCKCJH 047-2021 Performance requirements and test method for mask flame retardant tester
T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester
T/HBMIF 005-2022 Technical requirements for ground strength detector
T/GDCKCJH 048-2021 Performance requirements and test methods for ultraviolet analyzer
T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
T/GZZH 006-2023 Instructions for use of indoor air pollution on-site detection instruments
T/CMA JD063-2023 General technical requirement for eddy current metal flaw detectors in motor vehicle test
T/GDCKCJH 064-2022 Performance requirements and testing methods for cable plug testers
T/CEIA 001-2023 Generic Requirements for Land Pattern Design of Electronic Measuring Instruments
T/GDCKCJH 046-2021 Performance requirements and test method for helium mass spectrometer leak detector
T/SXCAA 008-2020 Requirements for the use of safety signs of inspection and testing institutions

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14480.1-2015 Non-destructive testing instruments―Equipment for eddy current examination―Part 1:Instrument characteristics and verification
GB/T 3412.1-2009 Instrument for dam monitoring—Readout unit—Part 1:Readout unit for vibrating wire type transducer
GB 4793-1984 Safety requirements for electronic measuring apparatus
GB 12358-2006 Gas monitors and alarms for workplace General technical requirements
GB 43067-2023 Technical requirements for safety of environmental monitoring instruments for coalmines
GB 8877-1988 Safety requirements for the installation and operation and maintenance of household electrical appliances

Professional Standard - Machinery

JB/T 11277-2012 Non-destructive testing instruments — Single channel acoustic impedance instrument
JB/T 11612-2013 Non-destructive testing instrument — Eddy current and magnetic flux leakage integrated testing instrument
JB/T 12455-2015 Nondestructive testing instruments―Swept frequency eddy current testing instrument
JB/T 11601-2013 Non-destructive testing instrument － Visual testing Equipment
JB/T 11780-2014 Non-destructive Testing Instrument - Characterization and Verification of Array Eddy Current Testing Instrument
JB/T 11259-2011 Non-destructive testing instrument —Multifrequency eddy current testing equipment
JB/T 11260-2011 Non-destructive testing instruments — Acoustic pulse reflectometry instrument
JB/T 11610-2013 Non-destructive testing instrument — Specifications for digital ultrasonic testing instruments
JB/T 11609-2013 Non-destructive testing instrument － Acoustic impact testing instrument
JB/T 11611-2013 Non-destructive testing instrument — Eddy current and magnetic memory integrated testing instrument
JB/T 11604-2013 Non-destructive testing instruments — Ultrasonic thickness gauge
JB/T 12456-2015 Non-destructive testintg instruments-Technical requirements of X-ray delector for circuit board detection
JB/T 12457-2015 Non-destructive testing instruments-Testing method of X-ray delector for circuit board detection
JB/T 12458-2015 Non-destructive testing instruments - - Multi-channel digital ultrasonic testing instrument
JB/T 12454-2015 Nondestructive testing instruments-Swept frequency acoustical testing instrument

工业和信息化部/国家能源局

JB/T 13150-2017 Nondestructive testing instrument. Variable array probe for eddy current testing instrument

未注明发布机构

ANSI/ISA 92.02.01-1998 Performance Requirements for Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale)
ANSI/ISA TR92.06.03-2008(2013) Feasibility of Chlorine Detection Instrument Testing
ANSI/ISA 92.04.01 Part 1-2007(2013) Part I–1996 Performance Requirements for Instruments Used to Detect Oxygen-Deficient/ Oxygen-Enriched Atmospheres
DIN 2272-1 Inspection equipment used in dimensional metrology; requirements; auxiliary measuring devices

Professional Standard-Safe Production

AQ 1029-2019 Application and management standard for coal mine safety monitoring system and detector
AQ/T 1029-2007 Coal mine safety monitoring system and testing instrument use management specification
AQ 1029-2007 Application and management standard for coal mine safety monitoring system and detector

Professional Standard - Nuclear Industry

EJ 528-1998 General safety requirements for nuclear instrumentation

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 1687-2016 Ammonia detector technical requirements and test methods
DB23/T 1688-2016 Formaldehyde detector technical requirements and test methods

Professional Standard - Environmental Protection

HJ/T 175-2005 Specifications and test procedures for automatic rainfall monitor

海关总署

SN/T 5473.3-2022 Technical requirements for the inspection of export medical devices - Part 3: Infrared thermometer

Professional Standard - Earthquake

DB/T 23-2007 Technical requirements of instruments in network for earthquake monitoring. Gravimeter
DB/T 22-2020 Technical requirements of instruments in network for earthquake monitoringSeismograph
DB/T 22-2007 Technical requirements of instruments in network for earthquake monitoring.Seismograph

National Metrological Verification Regulations of the People's Republic of China

JJG(石油) 21-1996 Verfication Regulation of Geophone Tester

CZ-CSN

CSN 35 6511-1986 Electronic measuring Instruments. Climatic requtrements. Condition of use
CSN 35 6551-1990 Nuclear instrumentation. General teehnical requirements and testing methods
CSN 25 4710-1969 Checking instruments for spur gears. asic technical requirements
CSN 35 6850-1972 Instruments for vibration measureinents. Technical requirements

HU-MSZT

MSZ 6134-1982 Optical instrument accuracy requirements and testing
MSZ 8880/2.lap-1963 Electrical product testing tools and testing methods. Use instruments
MSZ 18222/2-1979 Audiometric instruments. skills requirement
MSZ 2635-1965 Soil testing using detectors
MSZ 18222/3-1979 Audiometry instrument testing methods

International Organization for Standardization (ISO)

ISO 10109-7:2001 Optics and optical instruments - Environmental requirements - Part 7: Test requirements for optical measuring instruments
ISO 9918:1993 Capnometers for use with humans; requirements
ISO 9935:1992 Non-destructive testing; penetrant flaw detectors; general technical requirements
ISO 8655-1:2002 Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations
ISO 10109-11:2001 Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use
ISO 10109-8:1994 Optics and optical instruments - Environmental requirements - Part 8: Test requirements for extreme conditions of use
ISO 16061:2021 Instruments for use in association with non-active surgical implants - General requirements
ISO 15004-1:2020 Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments

Korean Agency for Technology and Standards (KATS)

KS C IEC 60476:2009 Nuclear instrumentation－Electrical measuring systems and instruments utilizing ionizing radiation sources－General aspects
KS C 6594-2023 Performance requirements for instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
KS C 6592-2023 Performance requirements for toxic gas-Detection instruments：Hydrogen sulfide
KS C 6594-2007(2018) Performance requirements for instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
KS B 5648-2002 Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS C 6592-2007(2018) Performance requirements for toxic gas-Detection instruments：Hydrogen sulfide
KS B ISO 10109-8-2022 Optics and optical instruments－Environmental requirements－Part 8：Test requirements for extreme conditions of use
KS B ISO 10109-11-2006(2016) Optics and optical instruments — Environmental requirements —Part 11: Optical instruments for outdoor conditions of use
KS C 6596-2023 Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS B ISO 9935:2016 Non-destructive testing－Penetrant flaw detectors－General technical requirements
KS C 6596-2007(2018) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS B ISO 8655-1:2006 Piston-operated volumetric apparatus-Part 1:Terminology, general requirements and user recommendations
KS B ISO 9935:2001 Non-destructive testing-Penetrant flaw detectors-General technical requirements
KS B ISO 10109-11-2006(2021) Optics and optical instruments — Environmental requirements —Part 11: Optical instruments for outdoor conditions of use
KS P ISO 16061:2008 Instrumentation for use in association with non-active surgical implants-General requirements
KS P ISO 15004-1-2023 Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments
KS P ISO 16061:2014 Instrumentation for use in association with non-active surgical implants — General requirements
KS C IEC 61083-1-2006(2016) Instruments and software used for measurements in high-voltage impulse tests Part 1：Requirements for instruments
KS C IEC 61083-1-2006(2021) Instruments and software used for measurements in high-voltage impulse tests Part 1：Requirements for instruments
KS B ISO 10109-11:2006 Optics and optical instruments－Environmental requirements－Part 11：Optical instruments for outdoor conditions of use
KS B ISO 10109-8:2002 Optics and optical instruments－Environmental requirements－Part 8：Test requirements for extreme conditions of use
KS B ISO 10109-8-2002(2017) Optics and optical instruments－Environmental requirements－Part 8：Test requirements for extreme conditions of use
KS B ISO 10109-8-2002(2022) Optics and optical instruments－Environmental requirements－Part 8：Test requirements for extreme conditions of use
KS P ISO 16061:2020 Instrumentation for use in association with non-active surgical implants — General requirements
KS C 1706-2020 Instrument transformers for testing purpose and used with general instrument
KS B 5648-2022 Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS P ISO 15004-1:2018 Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments
KS B ISO 10109-7-2019 Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS B ISO 10109-7:2004 Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS B ISO 10109-7-2004(2019) Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS C 1100-1978(2016) Glossary of terms used in electronic measuring apparatus
KS B ISO 10109-6-2022 Optics and optical instruments－Environmental requirements－Part 6：Test requirements for medical optical devices
KS C IEC 61083-1:2006 Instruments and software used for measurement in High-voltage impulse tests－Part 1：Requirements for instruments

RU-GOST R

GOST ISO 9918-2012 Capnometers for use with humans. Requirements
GOST R ISO 9918-1999 Capnometers for use with humans. Requirements
GOST 26170-1984 Nondestructive testing. Radiowave instruments. General technical requirements
GOST R 55614-2013 Non-destructive testing. Ultrasonic thickness gauges. General technical requirements
GOST 29074-1991 Equipment for monitoring of radiation situation. General requirements
GOST R 55223-2012 Force instruments. General metrological and technical requirements
GOST 30607-1998 Programmable controllers of machines. General technical requirements
GOST 12969-1967 Plates for machines and devices. Technical requirements

ISA - International Society of Automation

ISA 92.03.01-1998 Performance Requirements for Ammonia Detection Instruments (25-500 ppm)
ISA S12.15 PT I-1990 Performance Requirements for Hydrogen Sulfide Detection Instruments (10-100 ppm)
ISA 92.04.01 PART I-1996 Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
ISA 92.06.01-1998 Performance Requirements for Chlorine Detection Instruments (0.5-30 ppm Full Scale)
ISA 92.0.01 PART I-1998 Performance Requirements for Toxic Gas-Detection Instruments: Hydrogen Sulfide
ISA 92.02.01 PART I-1998 Performance Requirements for Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale)

SE-SIS

SIS SS IEC 231:1983 Nuclear instrumentation - General principles of nuclear reactor instrumentation
SIS SS IEC 232:1983 Nuclear instrumentation - General characteristics of nuclear reactor instrumentation
SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments

KR-KS

KS C 6594-2007(2023) Performance requirements for instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
KS C 6592-2007(2023) Performance requirements for toxic gas-Detection instruments：Hydrogen sulfide
KS C 6596-2007(2023) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS B ISO 10109-11-2023 Optics and optical instruments — Environmental requirements — Part 11: Optical instruments for outdoor conditions of use
KS C IEC 61779-3-2003(2023) Electrical devices for detecting and measuring combustible gases - Part 3 Performance requirements for Group I devices for detecting methane volume fraction
KS P ISO 16061-2020 Instrumentation for use in association with non-active surgical implants — General requirements
KS C IEC 61779-5-2003(2023) Electrical devices for detecting and measuring combustible gases - Part 5 Performance requirements for Group II devices for detecting combustible gas volume fraction
KS C IEC 61779-4-2003(2023) Electrical devices for detecting and measuring combustible gases - Part 4 Performance requirements for Group II devices for detecting lower explosion limit volume fraction
KS P ISO 15004-1-2018 Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments
KS C IEC 61779-2-2003(2023) Electrical devices for detecting and measuring combustible gases - Part 2 Performance requirements for Group I devices for detecting methane volume fraction below 5%

SCC

AS 2275.2:1979 Combustible gas detection instruments for use in explosive atmospheres - Performance requirements
UL 920401-2017 Standard for Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
UNE-EN 592:2002 Instructions for use for in vitro diagnostic instruments for self-testing.
DANSK DS/EN 592:2002 Instructions for use for in vitro diagnostic instruments for self-testing
NS-EN 592:2002 Instructions for use for in vitro diagnostic instruments for self-testing
AS 1290:1980 General requirements for linear measuring instruments used in construction
AS 1290:1972 Linear measuring instruments for use in construction - General requirements
NS-EN 12011:1998 Instrumentation to be used in association with non-active surgical implants — General requirements
BS EN ISO 16061:2008 Instrumentation for use in association with non-active surgical implants. General requirements
DANSK DS/EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
IEC 60348:1971 Safety requirements for electronic measuring apparatus
CEI EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
AS 2275.1:1979 Combustible gas detection instruments for use in explosive atmospheres - General requirements for explosion protection of electrical apparatus and systems
UNE-EN 12011:1998 INSTRUMENTATION TO BE USED IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS. GENERAL REQUIREMENTS.
DANSK DS/EN 12011:1998 Instrumentation to be used in association with non-active surgical implants - General requirements
DANSK DS/ISO 15004-1:2020 Ophthalmic instruments – Fundamental requirements and test methods – Part 1: General requirements applicable to all ophthalmic instruments
CEI EN IEC 62990-1:2023 Workplace Atmospheres Part 1: Gas detectors - Performance requirements of detectors for toxic gases
UNE-EN ISO 15004-1:2007 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006)
NS-EN ISO 15004-1:2006 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006)
UL Subject 920401-2017 Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres (CSDS Proposal, 8/25/2017)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE N42.37-2006 American National Standard for Training Requirements for Homeland Security Purposes Using Radiation Detection Instrumentation for Interdiction and Prevention

British Standards Institution (BSI)

BS EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Performance requirements for apparatus for the detection of combustible gases
BS ISO 10109-11:2001 Optics and optical instruments - Environmental requirements - Optical instruments for outdoor conditions of use
BS ISO 10109-8:1995 Optics and optical instruments - Environmental requirements - Test requirements for extreme conditions of use
BS 6020-1:1981 Instruments for the detection of combustible gases - Specification for general requirements and test methods
BS ISO 10109-8:1994 Optics and optical instruments - Environmental requirements - Test requirements for extreme conditions of use
BS 6020-5:1982 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% gas
BS ISO 10109-7:2001 Optics and optical instruments - Environmental requirements - Test requirements for optical measuring instruments
BS 6020-4:1981 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% lower explosive limit
BS EN 12011:1998 Instrumentation to be used in association with non-active surgical implants - General requirements
BS 6020-3:1982 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 100% methane
BS EN 61083-1:2001 Digital recorders for measurements in high-voltage impulse tests. Requirements for instruments
BS EN 61869-1:2010 Instrument transformers. General requirements
BS EN 61869-1:2009 Instrument transformers - General requirements
BS EN 61577-2:2017 Radiation protection instrumentation. Radon and radon decay product measuring instruments - Specific requirements for 222Rn and 220Rn measuring instruments

GOSTR

GOST R EN 592-2010 Instructions for use for in vitro diagnostic instruments for self-testing
GOST R ISO 16061-2011 Instrumentation for use in association with non-active surgical implants. General requirements

German Institute for Standardization

DIN 10956:2007-08 Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use
DIN 58951-2:2003 Sterilization - Steam sterilizers for laboratory use - Part 2: Apparatus requirements, requirements on services and installation
DIN 18700:1997 Figures for surveying instruments
DIN 10956:2007 Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use
DIN ISO 10109-8:2007 Optics and photonics - Environmental requirements - Part 8: Test requirements for extreme conditions of use (ISO 10109-8:2005) English version of DIN ISO 10109-8:2007-02
DIN IEC 61577-3:2012 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments (IEC 61577-3:2011)
DIN 2272-1:1985 Inspection equipment used in dimensional metrology; requirements; auxiliary measuring devices
DIN 18722:1983 Tubular level for surveying instruments; terms and requirements
DIN ISO 10109-6:2007 Optics and photonics - Environmental requirements - Part 6: Test requirements for medical optical instruments (ISO 10109-6:2005) English version of DIN ISO 10109-6:2007-02
DIN ISO 10109-11:2002 Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use (ISO 10109-11:2001)

GSO

GSO ISO 17514:2014 Time-measuring instruments -- Photoluminescent deposits -- Test methods and requirements
GSO OIML D11:2021 General requirements for measuring instruments - Environmental conditions
BH GSO OIML D11:2022 General requirements for measuring instruments - Environmental conditions
OS GSO IEC 61083:2007 Instruments and software used for measurement in high- voltage impulse tests - Part 1: Requirements for instruments
OS GSO ISO 18175:2013 Non-destructive testing -- Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
BH GSO ISO 18175:2016 Non-destructive testing -- Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
GSO ISO 1775:2010 Porcelain laboratory apparatus -- Requirements and methods of test

IN-BIS

IS 9249 Pt.2-1982 Instructing and recording safety requirements for electrical measuring instruments and their accessories Part Ⅱ Safety requirements for instruments using mains power
IS 3032-1965 General requirements for testing the accuracy of commercial measuring instruments used in the petroleum trade
IS 9858-1981 Safety requirements for electronic measuring instruments
IS 9249 Pt.1-1979 Instructing and recording safety requirements for electrical measuring instruments and their accessories Part Ⅰ General safety requirements for instruments

VE-FONDONORMA

NORVEN 55-4-1960 Detect the length of cotton fibers by using FIBROGRAFO instrument

Association Francaise de Normalisation

NF C23-541-2:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2 : performance requirements for apparatus for the detection of combustible gases.
NF S92-016:1995 IN VITRO DIAGNOSTIC SYSTEMS. REQUIRMENTS FOR USER MANUELS FOR IN VITRO DIAGNOSTIC INSTRUMENTS FOR PROFESSIONAL USE. (EUROPEAN STANDARD EN 591).
NF S92-017:1995 IN VITRO DIAGNOSTIC SYSTEMS. REQUIREMENTS FOR USER MANUALS FOR IN VITRO DIAGNOSTIC INSTRUMENTS FOR HOME USE. (EUROPEAN STANDARD EN 592).
NF C41-105*NF EN 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1 : requirements for instruments
NF EN 61083-1:2001 Devices and software used for measurements during high voltage impulse tests - Part 1: requirements for devices
NF EN ISO 15004-1:2020 Instruments ophtalmiques - Exigences fondamentales et méthodes d'essai - Partie 1 : exigences générales applicables à tous les instruments ophtalmiques
NF A09-320-1:2010 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1 : instruments.

Standard Association of Australia （SAA）

AS 61083.1:2006 Instruments and software used for measurement in high-voltage impulse tests - Requirements for instruments
AS 1290.1:1995 Linear measuring instruments used in construction - General requirements
AS 2162.2:1998 Verification and use of volumetric apparatus - Guide to the use of piston-operated volumetric apparatus (POVA)

RO-ASRO

STAS 7352/1-1988 APPARATUS FOR BLOOD PRESSURE MEASUREMENT WITH MERCURY GAUGES General technical requirements for quality
STAS 10327-1976 ELECTRONIC MEASURING APARATUS Safety requirements

American National Standards Institute （ANSI)

ANSI N42.33-2003 Radiation Detection Instrumentation for Homeland Security
ANSI N42.37-2006 Training Requirements for Homeland Security Purposes Using Radiation Detection Instrumentation for Interdiction and Prevention
ANSI N42.33-2006 Portable Radiation Detection Instrumentation for Homeland Security
ANSI/ISA 92.04.01-1-2007 Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
ANSI/IEEE C57.13:2008 Standard Requirements for Instrument Transformers

American Society for Testing and Materials (ASTM)

ASTM E4-08 Standard Practices for Force Verification of Testing Machines
ASTM E499-95(2000) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM E499/E499M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM E4-09a Standard Practices for Force Verification of Testing Machines
ASTM E4-09 Standard Practices for Force Verification of Testing Machines

JP-JEC

JEC 0221-2007 INSTRUMENTS USED FOR MEASUREMENTS IN IMPULSE VOLTAGE AND CURRENT TESTS Requirement for instruments

International Federation of Trucks and Engines

NAVISTAR MPAPS P-9564-2015 Truck Instrument Panel Material and Testing Requirements
NAVISTAR MPAPS P-9564-2016 Truck Instrument Panel Material and Testing Requirements

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C57.13-2008 Requirements for instrument transformers

ZA-SANS

SANS 9935:2004 Non-destructive testing - Penetrant flaw detectors - General technical requirements

European Committee for Standardization (CEN)

EN ISO 13504:2012 Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012)
EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006)
prEN 592-1991 In-vitro diagnostic systems; requirements for user manual of in-vitro diagnostic instruments for home use
EN ISO 15004-1:2020 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
prEN 50104-1992 Electrical apparatus for the detection and measurement of oxygen; performance requirements and test methods

Japanese Industrial Standards Committee (JISC)

JIS T 15004-1:2022 Ophthalmic instruments -- Fundamental requirements and test methods -- Part 1: General requirements applicable to all ophthalmic instruments

Underwriters Laboratories (UL)

UL 920401-2022 UL Standard for Safety Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres

PT-IPQ

NP EN 12011-2000 Instrumentation to be used in association with non-active surgical implants General requirements

Danish Standards Foundation

DS/EN ISO 16061:2009 Instrumentation for use in association with non-active surgical implants - General requirements
DS/EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments
DS/EN 62598:2013 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
DS/EN 60405:2007 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
DS/IEC 348:1981 Safety requirements for electronic measuring apparatus
DS/EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
DS/EN ISO 15004-1:2020 Ophthalmic instruments – Fundamental requirements and test methods – Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)

AENOR

UNE-EN 61083-1:2002 Instruments and software used for measurement in high-voltage impulse tests -- Part 1: Requirements for instruments.

CEN - European Committee for Standardization

EN ISO 15004-1:2006 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments

PL-PKN

PN T06565-1972 Microwave measuring Instruments Phase shifters General re?uirements and tests
PN M54303-1974 Industrial measuring ins?ruments Scales General requirements
PN Z54123-1988 Medical instruments Scissors Re?uirements and te?ts
PN T06500 ArkusZ5-1971 Electronic measuring equipment Safety re?uirements and tests
PN T06560-1971 Microwave measuring instruments Attenuators General re?uirements and tests

YU-JUS

JUS L.G7.003-1981 Saffety reguirements for electronic measuring apparatus
JUS L.G1.007-1994 Direct acting indicating analogue electrical measuring instruments and their accessories- Special requirements for multi-function instruments

GOST

GOST 22690.0-1977 Concrete is heavy. General requirements for methods for determining strength without destruction using mechanical instruments

DIN

DIN EN 12011:1998 Instrumentation to be used in association with non-active surgical implants - General requirements

CENELEC - European Committee for Electrotechnical Standardization

EN 61083-1:1993 Digital recorders for measurements in high-voltage impulse tests Part 1: Requirements for digital recorders
EN 60405:2007 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD69B-2007 Information Requirements for the Qualification of Silicon Devices

ES-UNE

UNE-EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
UNE-EN 62598:2013 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges (Endorsed by AENOR in October of 2013.)

International Electrotechnical Commission (IEC)

IEC 62089:2001 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters
IEC TR 61869-103:2012 Instrument transformers - The use of instrument transformers for power quality measurement
IEC 60348:1978 Safety requirements for electronic measuring apparatus
IEC 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments

IT-UNI

UNI EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments

TR-TSE

TS 2418-1976 SAFFTY REOUIREMENTS FOR ELECTRONIC MEASURING APPARATUS

European Committee for Electrotechnical Standardization（CENELEC）

EN 62598:2013 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
HD 401-1980 Safety Requirements for Electronic Measuring Apparatus

Aeronautical Radio Inc.

ARINC 413A SEC 7.0 Instrumentation Circuits

BE-NBN

NBN-EN 282-1992 Avalanche victim search apparatus (ARVA) safety requirements and inspections

Others: The use of safety testing equipment,Requirements for testing instruments,Testing instrument requirements,Use of testing equipment,Requirements for the use of testing instruments,Instrument use requirements,How to use analytical instrument detection,How to use the detection and analysis instrument,Technical requirements for testing instruments,Requirements for using large instruments