Three parameter d

Three parameter d, Total:160 items.

The international standard classification for "Three parameter d" includes: Drills, countersinks, reamers , Dividing and tool-workpiece holding devices , Transformers. Reactors , Equipment for the chemical industry , Plugs, socket-outlets, couplers , Geology. Meteorology. Hydrology .

The Chinese standard classification for "Three parameter d" includes: Machine tool assistive device and accessory , Separating machinery , Transformer , Pipe fittings, clamps and seals , Asynchronous machine , Electric drive control equipment , Low voltage apparatus in general , Meteorology , Radio Measurement .

Professional Standard - Machinery

JB/T 2426-2004 Specification and technical requirements for three - Phase station service transformers
JB/T 3185.1-2014 Three Roller Plate Bending Machine - Part 1: Types and Parameter
JB/T 10769.1-2007 Three-column and four - Point suspension centrifuges - Part 1: Types and basic parameters
JB/T 4371.1-1999 Self-tightening Keyless Drill Chuck - Parameters
JB/T 4371.1-2002 Keyless type three-jaw drill chucks Part 1:Parameters and accuracy testing
JB/T 3858-1999 The type and basic data of the three roller tube winding machine
JB/T 8797-1998 Middle and Small Sized Three-roll Plate Bending Machine Types and Basic Parameters
JB/T 2426-1992 Specification and Technical Requirements for Three-phase Station Service Transformers
JB/T 6554-2014 Planning Machines for Two, Three or Four-side Dressing: Parameters
JB/T 6554-1993 Planing Machines for Two, Three or Four-side Dressing Parameters
JB/T 4731.1-2002 Wrenchless three-jaw drill chucks Part 1: Parameters and accuracy checks
JB/T 12294.1-2015 Three rolls plate machine with inclined adjustable bottom rolls - Part 1: Types and basic parameters

Professional Standard - Construction Industry

JGJ 35-1987(第三部分) Standard for parameter of construction atmosphere (Part 3)

Professional Standard - Aviation

HB 4615-1992 Milling Cutter - Three-gear Morse Taper Shank End-milling Cutter d=14~28mm
HB 690-1992 Staggered tooth three-sided edge milling cutter D=50~200mm
HB 691-1992 Milling Cutter - Staggered Tooth Three-edge Milling Cutter for Machining Deep Groove D=80~200mm
HB 691-1979 D=80~200mm for machining deep grooves with staggered teeth and three sides
HB 689-1979 Straight tooth three side edge milling cutter D=50~200mm
HB 6832-1993 Three-gear-scappled End Blade-cross-center Straight Shank End Milling Cutter for Numerically-controlled Machine Tool d=10~28mm
HB 4-18-1999 D type tee pipe joint
HB 4609-1992 Milling Cutter - Three-gear-scappled Straight Shank End Milling Cutter d=6~28mm
HB 694-1979 Inserted three-sided edge milling cutter D=224~315mm
HB 6837-1993 Three-gear End Blade-cross-center Morse Taper Shank End-milling Cutter for Numerically-controlled Machine Tool d=14~28mm
HB 6114-1986 Basic Parameter, Shape and Installation Dimension of Three-phase Gyro Motor
HB 6911-1994 CNC milling machine processing aluminum alloy with three-tooth flat straight handle rough machining end mill d=25~45mm
HB 692-1979 D=63~100mm for machining light alloy with staggered teeth and three sides edge milling cutter
HB 3545-1985 Triangular reamer d＝0.5~0.95mm
HB 697-1992 Milling Cutter - May Adjust Three-edge Milling Cutter D=63~125mm
HB 689-1992 Milling Cutter - Straight Tooth Three-edge Milling Cutter D=50~200mm
HB 4-18-2002 Tee D type flared tube
HB 8148-2002 Tee D type titianium alloy flared tube
HB 694-1992 Milling Cutter - Tipped Three-edge Milling Cutter D=224~315mm
HB 4578-1992 Slot milling cutter for three-tooth end milling cutter D=28～63mm
HB 695-1979 = 80~180mm
HB 697-1979 Adjustable side and side milling cutter D=63~125mm
HB 696-1992 Milling Cutter - Tipped Three-edge Milling Cutter for Machining Light Alloy D=200~315mm
HB 6836-1993 Three-tooth Morse taper shank end mill d=14~28mm for CNC machine tools
HB 6914-1994 CNC milling machine processing aluminum alloy with three-tooth Morse taper handle rough machining end mill d=25~63mm
HB 693-1992 Milling Cutter - Tipped Three-edge Milling Cutter (D=80~200mm)
HB 693-1979 Inserted three-sided edge milling cutter D=80~200mm
HB 690-1979 Staggered tooth three-sided edge milling cutter D=50~200mm
HB 4605-1992 Milling Cutter - Double-head Three-gear Ordinary Straight Shank End Milling Cutter d=10~25mm
HB 4603-1992 Milling Cutter - Three-gear Common Straight Shank End Milling Cutter D=3~28mm
HB 695-1992 Milling Cutter - Tipped Three-edge Milling Cutter Machining Light Alloy D=80~180mm
HB 6831-1993 Three-gear-scappled Straight Shank End Milling Cutter for Numerically-controlled Machine Tool d=6~28mm

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32825-2016 Technical parameters and requirements for three - phase dry - type wound core distribution transformers
GB 1003-2008 Three phases plugs and socket-outlets for household and similar purposes - Types，basic parameters and dimensions
GB/T 6451-1999 Specification and technical requirements for three-phase oil-immersed power transformers
GB 1003-1999 Three phases plugs and socket-outlets for household and similar purposes Types，basic parameters and dimensions
GB/T 6451-1999(XG1-2002) Specification and technical requirements for three-phase oil immersed power transformers
GB/T 6451-1995 Specification and technical requirements for three-phase oil immersed power transformers
GB/T 25438-2010 Specification and technical requirements for three-phase oil-immersed tridimensional toroidal-core distribution transformers
GB/T 13756-1992 Three-column centrifuge--Types and basic parameters
GB/T 1003-2016(英文版) "Three phases plugs and socket outlets for household and similar purposes-Types,basic parameters and dimensions"
GB/T 1003-2016 Three phases plugs and socket-outlets for household and similar purposes—Types，basic parameters and dimensions

未注明发布机构

VDI VDE 2617 Blatt 2-1-2005 Accuracy of coordinate measuring machine parameters and their analysis
VDI VDE 2617 Blatt 6-1-2007 Accuracy of coordinate measuring machine parameters and their testing

Hubei Provincial Standard of the People's Republic of China

DB42/T 1506-2019 Technical specifications for parametric modeling of 3D solid models

中国气象局

QX/T 238-2019 Technical specifications for broadcasting and receiving of FY-3B/C/D meteorological satellite data

Anhui Provincial Standard of the People's Republic of China

DB34/T 3250-2018 Technical specifications for three-coordinate measurement of geometric parameters of circles and arcs

National Metrological Verification Regulations of the People's Republic of China

JJG 516-1987 Model BJ2920 (HQ2) Digital DC Characterization Tester for Bipolor Transiste

Military Standard of the People's Republic of China-General Armament Department

GJB 90.3-1986 Measurement method of main parameters of three centimeter radar frequency agility system

工业和信息化部/国家能源局

JB/T 2426-2016 Technical parameters and requirements for self-use three-phase transformers in power plants and substations

机械工业部

JB 2426-1992 Technical parameters and requirements for self-use three-phase transformers in power plants and substations

Guangdong Provincial Standard of the People's Republic of China

DB44/T 2177-2019 Standing carbon accounting model and parameters of three native broad-leaved tree species including camphor tree

Hebei Provincial Standard of the People's Republic of China

DB13/T 138-1992 Determination method of raw juice content in fruit and vegetable beverages Three-parameter judgment method
DB13/T 2201-2015 Three-phase oil-immersed three-dimensional wound core power transformer technical parameters and requirements

Taiwan Provincial Standard of the People's Republic of China

CNS 10799-1984 Three-Dimensional Refrence System for Automobiles

Professional Standard - Agriculture

空气和废气监测分析方法 5.2.3-2003 Chapter 5 Pollution Source Monitoring Chapter 2 Determination of Flue Gas Parameters Three Pressures (A)

Defense Logistics Agency

DLA SMD-5962-91536 REV B-2012 MICROCIRCUIT, DIGITAL, ECL, TRIPLE D FLIP-FLOP MONOLITHIC SILICON
DLA SMD-5962-84071 REV H-2009 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, THREE-STATE OCTAL D-TYPE FLIP-FLOP, MONOLITHIC SILICON
DLA MIL-M-38510/442 A VALID NOTICE 4-2010 Microcircuits, Digital, Schottky, TTL, D-Type Register, with Three-State Output, Monolithic Silicon
DLA SMD-5962-01524-2001 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL D-TYPE LATCH WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-86825 REV C-2008 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, QUAD D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-91536 REV A-2004 MICROCIRCUIT, DIGITAL, ECL, TRIPLE D FLIP-FLOP, MONOLITHIC SILICON
DLA SMD-5962-04212 REV A-2011 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 16-BIT D-TYPE LATCH WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-87694 REV F-2011 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-99534-1999 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, 16-BIT TRANSPARENT LATCH WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-92180 REV B-2013 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL D-TYPE LATCH WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-92179 REV B-2013 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-99535-1999 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, 16-BIT D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-86813 REV C-2008 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, OCTAL D-TYPE LATCH WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA L-P-390 C NOTICE 2-2000 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) [Refer To: ASTM D4976, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, ASTM D4976 REV B, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, AS
DLA L-P-390 C-1971 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) [Refer To: ASTM D4976, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, ASTM D4976 REV B, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, AS
DLA SMD-5962-85128 REV E-2009 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, OCTAL D-TYPE LATCH WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA L-P-390 C (2)-1984 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) [Refer To: ASTM D4976, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, ASTM D4976 REV B, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, AS
DLA SMD-5962-06245 REV C-2011 MICROCIRCUIT, DIGITAL, RADIATION HARDENED CMOS, 16-BIT D FLIP FLOP, TTL COMPATIBLE INPUTS, AND THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-84072 REV G-2009 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, OCTAL TRANSPARENT D-TYPE LATCHES WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-89513 REV C-2010 MICROCIRCUIT, DIGITAL, FAST CMOS, OCTAL-D-REGISTER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE, MONOLITHIC SILICON
DLA SMD-5962-06245 REV B-2009 MICROCIRCUIT, DIGITAL, RADIATION HARDENED CMOS, 16-BIT D FLIP FLOP, TTL COMPATIBLE INPUTS, AND THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/04739 REV A-2011 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS LOGIC OCTAL D-TYPE FLIP FLOP 3-STATE, POSITIVE EDGE TRIGGERED, MONOLITHIC SILICON
DLA SMD-5962-87631 REV E-2012 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL D-TYPE FLIP-FLOP, TTL COMPATIBLE INPUTS, THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/03663 REV A-2009 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/04621 REV A-2010 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL D-TYPE TRANSPARENT LATCH WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/04667 REV A-2010 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, OCTAL TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-86062 REV E-2012 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, OCTAL INVERTING D-TYPE LATCH WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-97575 REV C-2010 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, OCTAL TRANSPARENT D-TYPE LATCH WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-87631 REV D-2011 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL D-TYPE FLIP-FLOP, TTL COMPATIBLE INPUTS, THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/06654-2006 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-V ABT 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS, MONOLITHIC SILICON

RU-GOST R

GOST 10664-1982 Three-and four-roller sheet bending machines. Parameters
GOST 22931-1993 Wide v-belt variable-speed drives. Parameters
GOST 22931-1978 Bp type variators with wide angle belt with two adjustable pulleys. Basic parameters
GOST 15172-1970 Transistors. List of basic and reference electrical parameters
GOST 20883-1988 Three-screw pumps and pump units. Types and basic parameters
GOST 20304-1990 Three-dimensional and two-dimensional manikins. Construction, main parameters and dimensions
GOST 14242-1969 Middle flow three-way actuating device SSI. Types and basic parameters
GOST 21107.9-1976 Gas-discharge devices. Methods of measurement of electrial parameters of pulse thyratrons
GOST 24631-1981 Referens atmospheres. Parameters

TIA - Telecommunications Industry Association

TIA-136-123-E-2004 TDMA – Third Generation Wireless Digital Control Channel Layer Three (Revision of TIA/EIA-136-123-D)

US-FCR

FCR COE CERC-94-1 FINAL REPORT-1994 THREE-PARAMETER CHARACTERIZATION OF SHALLOW-WATER DIRECTIONAL WIND WAVE SPECTRA

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE EG 10-2003 Tape Transport Geometry Parameters for 19-mm Type D-1 Television Digital Component Recording
SMPTE EG 20-1997 Tape Transport Geometry Parameters for 19-mm Type D-2 Composite Format for Television Digital Recording
SMPTE RP 431-2-2007 D-Cinema Quality ?Reference Projector and Environment

German Institute for Standardization

DIN 41636-5:1987 Sensitive switches for information technology; dimensions, ratings, requirements, tests; type D

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM28728/6-2010 DIAL, CONTROL, MULTITURN COUNTERS, THREE-DIGIT, ILLUMINATED AND NON-ILLUMINATED Rev 1 [Superseded: DLA MIL-D-28728/6 B CANC NOTICE 2, DLA MIL-D-28728/6 B NOTICE 1, DLA MIL-D-28728/6 B, DLA MIL-D-28728/6]
AIA/NAS NASM28728/5-2010 DIAL, CONTROL, MULTITURN COUNTERS, THREE-DIGITS Rev 1 [Superseded: DLA MIL-D-28728/5 B CANC NOTICE 2, DLA MIL-D-28728/5 B NOTICE 1, DLA MIL-D-28728/5 B, DLA MIL-D-28728/5]

American Welding Society (AWS)

WRC 301:1985 A Parametric Three-Dimensional Finite Element Study of 45 Degree Lateral Connections

WRC - Welding Research Council

BULLETIN 301-1985 A PARAMETRIC THREE-DIMENSIONAL FINITE ELEMENT STUDY OF 45 DEGREE LATERAL CONNECTIONS
BULLETIN 344-1989 THREE DIMENSIONAL FINITE ELEMENT ANALYSIS OF PVRC 45 DEGREE LATERAL MODEL 4 (D/D = 0.5@ D/T = 40) UNDER OUT-OF-PLANE MOMENT LOADING ON BRANCH PIPES

CZ-CSN

CSN 30 7060-1987 Tractors. Three—point linkage. Kinema- tic parameters and technical requirements
CSN 30 7065-1987 Front-three-point linkage. Connection dimensions, kinematic parameters and technical requirements
CSN 35 1121-1988 Three phase oil power trnasformers 100 to 1600 kV . A, to 22 kV. Technica] requirements and basic parametres

SCC

MIL MIL-M-38510/442A-1983 MICROCIRCUITS, DIGITAL, SCHOTTKY, TTL, D-TYPE REGISTER, WITH THREE-STATE OUTPUT, MONOLITHIC SILICON (SUPERSEDING MIL-M-38510/442)(SEE BASE FOR INACTIVATION NOTICE)
MIL MIL-D-28728/5B-1986 DIAL, CONTROL, MULTITURN COUNTERS, THREE DIGITS (SUPERSEDING MIL-D-28728/5A) (S/S BY NASM28728/5-2001)
VDI/VDE 2617 BLATT 2.2-2018 Accuracy of coordinate measuring machines — Parameters and their testing — Form measurement with coordinate measuring machines
MIL MIL-D-70789A-1992 DYNAMIC REFERENCE UNIT (DRU) (SUPERSEDING MIL-D-70789)
MIL MIL-D-28728/6B-1986 DIAL, CONTROL, MULTITURN COUNTERS, THREE DIGITS, ILLUMINATED AND NONILLUMINATED (SUPERSEDING MIL-D-28728/6A) (S/S BY NASM28728/6-2001)
08/30190998 DC BS ISO 26431-2. Digital cinema (D-cinema) quality. Part 2. Reference projector and environment
VDI/VDE 2617 BLATT 2.3-2004 Accuracy of coordinate measuring machines — Parameters and their testing — Acceptance and confirmation testing of large-scale coordinate measuring machines
MIL MIL-D-70789-1989 DYNAMIC REFERENCE UNIT (DRU) (S/S BY MIL-D-70789A)
VDI/VDE 2617 BLATT 7-2008 Accuracy of coordinate measuring machines — Parameters and their testing — Determination of the uncertainty of measurements on coordinate measuring machines by simulation
VDI/VDE 2617 BLATT 6.3-2008 Accuracy of coordinate measuring machines — Parameters and their testing — Coordinate measuring machines with multi-sensor technology
VDI/VDE 2617 BLATT 5-2010 Accuracy of coordinate measuring machines — parameters and their testing — monitoring by test bodies
VDI/VDE 2617 BLATT 2.3-2004 Accuracy of coordinate measuring machines — Parameters and their testing — Acceptance and confirmation testing of large-scale coordinate measuring machines
VDI 3807 BLATT 3-2015 Consumption parameters for buildings — partial water parameters

AENOR

UNE 103402:1998 DETERMINATION OF STRENGTH PARAMETERS OF A SOIL IN TRIAXIAL SET APPARATUS.

VDI - Verein Deutscher Ingenieure

VDI/VDE 2617 Blatt 2.2-1999 Accuracy of coordinate measuring machines - Parameters and their reverification - Form measurement
VDI/VDE 2617 BLATT 8-2017 Accuracy of coordinate measuring machines - Characteristics and their testing - Test suitability of measurements with coordinate measuring machines
VDI/VDE 2617 BLATT 8-2018 Accuracy of coordinate measuring machines - Characteristics and their testing - Test process suitability of measurements with coordinate measuring machines
VDI/VDE 2617 Blatt 5-2009 Accuracy of coordinate measuring machines - Parameters and their verification - Interim check with artefacts
VDI/VDE 2617 BLATT 8-2013 Accuracy of coordinate measuring machines - Characteristics and their checking - Test suitability of measurements with coordinate measuring machines

GOSTR

GOST 12248.3-2020 Soils. Determination of strength and deformation parameters by triaxial compression testing

Korean Agency for Technology and Standards (KATS)

KS R 0031-2008 THREE-DIMENSIONAL REFERENCE SYSTEM FOR AUTOMOBILES
KS A ISO 26433-2022 Digital cinema(D-cinema)－XML data types
KS A ISO 26433-2012(2022) Digital cinema(D-cinema)－XML data types
KS A ISO 26433-2012(2017) Digital cinema(D-cinema)－XML data types

ETSI - European Telecommunications Standards Institute

GSM 03.02-1996 See ETS 300 522 Third Edition
PRETS 300 169-1991 Data Link Layer Protocol for the D-Channel of the Interfaces at the Reference Point between Terminal Equipment and Private Telecommunications Networks
GSM 02.67-1999 See PRETS 300 924 Third Edition (Version 5.1.0)

PL-PKN

PN G46691-1972 Min? scraper corweyors two-strand and ?hrees?rand-chain Main parame?ers and dimensions
PN G61013-1986 Rotary drillings of normal diameters Movable pulley blocks with trihorn hook Principal requirements

Institute of Electrical and Electronics Engineers (IEEE)

SMPTE EG 10:2003 EG 10:2003 - SMPTE Engineering Guideline - Tape Transport Geometry Parameters for 19-mm Type D-1 Television Digital Component Recording
EG 10:2003 EG 10:2003 - SMPTE Engineering Guideline - Tape Transport Geometry Parameters for 19-mm Type D-1 Television Digital Component Recording

Association of German Mechanical Engineers

VDI/VDE 2617 Blatt 2.2-2000 Accuracy of coordinate measuring machines - Parameters and their reverification - Form measurement

GSO

OS GSO ISO 26433:2016 Digital cinema (D-cinema) -- XML data types
GSO ISO 26433:2016 Digital cinema (D-cinema) -- XML data types

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R BT.1117-2 SPANISH-1997 STUDIO FORMAT PARAMETERS FOR ENHANCED 16:9 ASPECT RATIO 625-LINE TELEVISION SYSTEMS (D- AND D2-MAC@ PALplus@ ENHANCED SECAM)

International Organization for Standardization (ISO)

ISO 4287-1:1984 Surface roughness; Terminology; Part 1 : Surface and its parameters Trilingual edition

Association Francaise de Normalisation

NF ISO 4130:1990 Road vehicles - Three-dimensional reference system and reference points - Definitions

SAE - SAE International

SAE R-297-2014 Automotive Fuels Reference Book (Third Edition)