Various on-site testing instruments

Various on-site testing instruments, Total:84 items.

The international standard classification for "Various on-site testing instruments" includes: Geology. Meteorology. Hydrology , Acoustics measurements and noise abatement in general , Measurement of electrical and magnetic quantities , Power stations in general .

The Chinese standard classification for "Various on-site testing instruments" includes: Oceanographic instrumentation , Noise and vibration test methods , Electrical parametric test and power supply unit , Meteorology .

Jilin Provincial Standard of the People's Republic of China

DB22/T 2004-2014 Air formaldehyde on-site detector
DB22/T 1841-2013 On-site inspection service specification

Professional Standard - Construction Industry

JG/T 345-2011 Construction of indoor environment testing instrument

Professional Standard - Ocean

HY/T 097-2007 Test method of in-situ sulfide analyzer

Group Standards of the People's Republic of China

T/CEC 568-2021 SF6/N2 mixed gas mixture ratio detector calibration and on-site detection method
T/YSG 001-2022 Specifications for Field Calibration of Combustible Gas Detection and Alarms
T/JSEE 004-2024 Coiled cable field tester
T/CIMA 0004-2018 Testing equipment on-site for AC charging spot of electric vehicle
T/CPMA 021-2020 Method of on-site detection of ammonia nitrogen in drinking water - Salicylic Acid Method
T/CIMA 0003-2018 Testing equipment on-site for off-board charger of electric vehicle
T/GDCKCJH 003-2019 Technical Guide for On-site Metallographic Inspection of Special Pressure Equipment
T/GZZH 006-2023 Instructions for use of indoor air pollution on-site detection instruments
T/SMA 0005-2019 On-site test specification for power transformer sudden-change pressure relay
T/CECS 1050-2022 On-site testing standard for compressive strength of special concrete for engineering structure reinforcement

Hebei Provincial Standard of the People's Republic of China

DB13/T 2284-2015 Technical specifications for on-site detection of species of timber forest species
DB13/T 935-2008 Technical specifications for on-site detection of fruit tree varieties (strains)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 19884-2005 Acoustics. In-situ determination of insertion loss of outdoor noise barriers of all types
GB/T 43191-2023 On-site testing instruments of AC charging spot for electric vehicles

工业和信息化部

JB/T 13941-2020 Nondestructive testing instrument - Remote-field eddy current testing equipment

Professional Standard - Energy

DL/T 2407-2021 On-site inspection method of dissolved gas content in insulating oil
NB/T 10641-2021 Testing equipment on-site for off-board charger of electric vehicle

Henan Provincial Standard of the People's Republic of China

DB4117/T 349-2022 Safety and protection codes for inspection and testing sites of electromechanical special equipment
DB41/T 2543-2023 Safety operating standards for inspection and testing of pressure-bearing special equipment
DB4117/T 334-2022 Safety and protection codes for inspection and testing sites of pressure-bearing special equipment

Professional Standard - Meteorology

QX/T 73-2007 Verification Regulation of Anemometer for Wind Farm

Professional Standard - Machinery

JB/T 12020-2014 Inspection Criteria for Reagent Kits Used for Multi-parameter Field Fast Food Quality Analyzer
JB/T 12019-2014 General Specification for Multi-parameter Field Fast Food Quality Analyzer

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1763-2014 On-site detection method of transformer standard device

Military Standard of the People's Republic of China-General Armament Department

GJB 10141-2021 On-site verification procedures for military oil and gas concentration detection alarms

未注明发布机构

DIN ISO 17123-3 E:2017-10 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 3: Theodolites

Professional Standard - Electricity

DL/T 826-2002 On-site testing equipment for alternating current electricity meters
DL/T 2264-2021 Site test specification for smart high voltage power transformer

Anhui Provincial Standard of the People's Republic of China

DB3418/T 016-2022 On-site inspection service guide for inspection and testing institutions

Hubei Provincial Standard of the People's Republic of China

DB4212/T 42-2020 Specifications for On-site Safety Supervision and Inspection of Special Equipment (Trial Implementation)

Shanxi Provincial Standard of the People's Republic of China

DB1407/T 41-2022 On-site service specification for inspection and testing institutions

HU-MSZT

MSZ 4055/8.lap-1960 Inspection of various forceps of surgical instruments
MSZ 2543/5-1970 Detection of various problems with wood saws

International Organization for Standardization (ISO)

ISO 10847:1997 Acoustics - In-situ determination of insertion loss of outdoor noise barriers of all types
ISO 17123-7:2005 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 7: Optical plumbing instruments
ISO 17123-1:2014 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory
ISO 17123-1:2010 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory
ISO 17123-9:2018 Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 9: Terrestrial laser scanners
ISO 17123-8:2015 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 8: GNSS field measurement systems in real-time kinematic (RTK)
ISO 17123-8:2007 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 8: GNSS field measurement systems in real-time kinematic (RTK)
ISO 17123-4:2001 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM instruments)
ISO 17123-5:2005 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Electronic tacheometers
ISO 17123-3:2001 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 3: Theodolites
ISO/IEEE 11073-90101:2008 Health informatics — Point-of-care medical device communication — Part 90101: Analytical instruments — Point-of-care test
ISO 17123-5:2018 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Total stations
ISO 17123-2:2001 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 2: Levels

German Institute for Standardization

DIN 18723-7:1990-07 Field procedure for precision testing of surveying instruments; gyroscopes
DIN ISO/TS 22476-11:2005 Geotechnical investigation and testing - Field testing - Part 11: Flat dilatometer test (ISO/TS 22476-11:2005); German version CEN ISO/TS 22476-11:2005
DIN ISO 17123-2:2021-02 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 2: Levels (ISO 17123-2:2001); Text in German and English / Note: Date of issue 2021-01-08

Korean Agency for Technology and Standards (KATS)

KS I ISO 10847:2004 Acoustics-In-situ determination of insertion loss ofoutdoor noise barriers of all types
KS B ISO 12857-1-2002(2022) Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 1：Levels
KS B ISO 12857-2-2022 Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 2：Theodolites
KS B ISO 12857-2-2002(2022) Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 2：Theodolites
KS B ISO 12857-1-2022 Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 1：Levels

British Standards Institution (BSI)

BS ISO 17123-8:2015 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. GNSS field measurement systems in real-time kinematic (RTK)
BS ISO 17123-5:2018 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments - Total stations
BS ISO 17123-9:2018 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments - Terrestrial laser scanners
BS ISO 17123-6:2022 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments - Rotating lasers

Japanese Industrial Standards Committee (JISC)

JIS B 7901:1998 Geodetic instruments -- Levels -- Field procedures for determining accuracy
JIS B 7909:1998 Geodetic instruments -- Theodolites -- Field procedures for determining accuracy
JIS B 7912-5:2016 Field procedures for testing geodetic and surveying instruments -- Part 5: Total stations
JIS B 7912-4:2016 Field procedures for testing geodetic and surveying instruments -- Part 4: Electro-optical distance meters (EDM measurements to reflectors)

SCC

DIN 18213:2022 Optics and optical instruments - Field procedures for testing geodetic and surveying Instruments - GNSS Instruments
DIN 18213 E:2021 Draft Document - Optics and optical instruments - Field procedures for testing geodetic and surveying Instruments - GNSS Instruments
05/30141026 DC ISO 17123-8. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 8. GNSS field measurement systems in real-time kinematic (RTK)

CZ-CSN

CSN 25 0100-1986 Tests and approvals of a types of measuring instruments. General requirements

American National Standards Institute （ANSI)

ANSI N42.18-2004 Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents
ANSI/SPRI IA-1-2010 Standard Field Test Procedure for Determining the Mechanical Uplift Resistance of Insulation Adhesive over Various Substrates
ANSI/TIA-1152-2009 Requirements for Field Test Instruments and Measurements for Balanced Twisted-Pair Cabling

GSO

OS GSO ISO 17123-4:2008 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM instruments)
OS GSO ISO 17123-3:2007 Optics and optical instruments- Field procedures for testing geodetic and surveying instruments- Part 3: Theodolites
GSO 1254:2002 Testing emulsified asphalts field coating test
GSO ISO 17123-7:2007 Optics and optical instruments- Field procedures for testing geodetics and surveying instruments - Part 7: Optical plumbing instruments
GSO ISO 17123-1:2008 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory
OS GSO ISO 17123-1:2008 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory
OS GSO ISO 17123-2:2007 Optics and optical instruments- Field procedures for testing geodetic and surveying instruments- Part 2: Levels

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE AC-02-14-2-2002 Comparison of Three Fault Detection Methods Based on Field Data of an Air-Handling Unit

TIA - Telecommunications Industry Association

TIA-1152-A-2016 Requirements for Field Test Instruments and Measurements for Balanced Twisted-Pair Cabling
TIA-1152-2009 Requirements for Field Test Instruments and Measurements for Balanced Twisted-Pair Cabling

CN-STDBOOK

图书 A-4733 Work Manual for On-site Safety Supervision and Inspection of Special Equipment

Others: On-site testing equipment,On-site testing instrument verification,Various on-site testing instruments,On-site testing equipment