Metal Detection Raw Materials

Metal Detection Raw Materials, Total:206 items.

The international standard classification for "Metal Detection Raw Materials" includes: Other products of non-ferrous metals , Non-destructive testing , Copper products , Textiles in general , food products in general , Welded joints , Cement. Gypsum. Lime. Mortar , Recycling , Aluminium products , Powder metallurgy , Haulage and hoisting equipment , Other mining equipment .

The Chinese standard classification for "Metal Detection Raw Materials" includes: Precious metals and their alloys , Basic standards and general methods , Heavy metals and their alloys , Basic standards and general methods , Food processing and products in general , Hydrogeological survey , Welding and cutting , Cement , Toxic and harmful solid waste control standards , Light metals and their alloys , Powder metallurgy material and product , Powder metallurgy analysis method , Mining machinery equipment in general , Conveying machinery .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 38470-2023 Recycling material for copper alloy
GB/T 23608-2022 Recycled platinum groups metal raw materials
GB/T 26642-2011 Non-destructive testing - Test method for computed radiography of metallic materials
GB/T 5509-1985 Inspection of grain and oilseeds; Methods for determination of magnetic metals content of flours
GB/T 19943-2005 Non-destructive test - Radiographic examination of metallic materials by X-and gamma-rays - Basic rules
GB/T 17593-1998 Textiles--Test method of heavy metal ions--Atomic absorption spectrophotometry

Professional Standard - Geology

DZ/T 0064.78-1993 Groundwater quality test methods - the determination of tritium with metallic zinc reduction method

未注明发布机构

DIN 51211:1961 Testing of Metallic Materials; Reverse Bend Test of Wires
DIN EN 12062:2002 Non-destructive testing of welded joints – general rules for metallic materials
SAE AMS 2628C-2024 Enhanced Ultrasonic Immersion Inspection for Titanium Alloy and other Metal Alloy Billets
DIN EN 1321:1996 Destructive testing of welded joints on metallic materials. Macroscopic and microscopic examinations
DIN 51212:1965 Testing of Metallic Materials; Torsion Test of Wires
GJB 1580A-2019 Deformed metal ultrasonic testing
DIN EN ISO 17635 E:2015-08 General rules for non-destructive testing of metallic materials for welds (draft)

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 41120-2021 Non-destructive testing―Test method for non-ferromagnetic metallic component pulsed eddy current testing
GB/T 39789-2021 Non-destructive testing of welds—Eddy current-video integrated testing method of metal composites weld

Group Standards of the People's Republic of China

T/ATNT 1-2023 Method for testing the performance of couplant for ultrasonic testing of metal materials
T/QGCML 2190-2023 Metal hose detection device
T/CCAS 019-2021 Determination of heavy metals in cement and clinker―ICP-OES method

Professional Standard - Commodity Inspection

SN/T 1791.9-2018 Rules for inspection and quarantine of imported solid wastes as raw materials Part 9:Nonferrous metal scraps
SN/T 1791.9-2006 Rules for the inspection and quarantine of waste imported as raw material-Part 9:Non-ferrous metal scraps

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34628-2017 Non-destructive testing of welds-General rules for metallic materials
GB/T 33912-2017 Wrought aluminum and aluminum alloy ingots made of high pure materials

Henan Provincial Standard of the People's Republic of China

DB41/ 770-2012 Specifications for daily inspection and periodic inspection of hoisting systems in metal and nonmetal mines

Hebei Provincial Standard of the People's Republic of China

DB13/T 2807-2018 Specification for inspection and inspection of special equipment for metal and nonmetal underground mines
DB13/T 5067-2019 Safety specification for raw material storage yard operation of metal and non-metallic ore concentrator

Professional Standard-Ships

CB/T 4257-2013 Ultrasonic testing method of marine metallic composite

Professional Standard - Machinery

JB/T 9137-2015 Sintered metal friction materials. Metallographic method
JB/T 9137-1999 Sintered metal friction materials - Metallographc method

工业和信息化部

YS/T 1130-2016 Sintered porous metal-Detection methods of welding crack

Shandong Provincial Standard of the People's Republic of China

DB37/ 1695-2010 Management specifications for daily inspection and periodic inspection of hoisting systems in metal and nonmetal mines
DB37/T 2386-2013 General requirements for metal and non-metal mine safety production inspection and inspection report

Taiwan Provincial Standard of the People's Republic of China

CNS 4195-1982 General Rules for Inspection of Non-ferrous Metal Materials

Professional Standard-Safe Production

AQ 2022-2008 Sfety inspecting-testing specification of in-service hoisting winder for metal and nonmetal mines
AQ/T 2081-2023 Safety inspection-testing specification of belt conveyor for metal and nonmetal mines
AQ/T 2075-2019 Safety testing-inspecting directory of in-service equipment and facilities for metal and nonmetal mines

未注明发布机构

GJB 1580A-2019 Deformed metal ultrasonic testing
DIN 51211:1961 Testing of Metallic Materials; Reverse Bend Test of Wires
DIN 51212:1965 Testing of Metallic Materials; Torsion Test of Wires
DIN EN 1321:1996 Destructive testing of welded joints on metallic materials. Macroscopic and microscopic examinations
SAE AMS 2628C-2024 Enhanced Ultrasonic Immersion Inspection for Titanium Alloy and other Metal Alloy Billets
DIN EN ISO 17635 E:2015-08 General rules for non-destructive testing of metallic materials for welds (draft)
DIN EN 12062:2002 Non-destructive testing of welded joints – general rules for metallic materials

HU-MSZT

MSZ 8884/10-1969 Raw material testing of environmentally related products. Building metal corrosion testing
MSZ 7742/2-1970 Non-metallic inorganic coatings. Positive detection
MSZ 15963-1967 Radiographic testing of metal materials. Determination of painting quality
MSZ 7919/2-1988 Hard solder. Metal binding stability testing
MSZ 5999/1-1972 Metal and casting technology testing. Metal wire quality inspection
MSZ 5547-1968 Technical raw material testing. Pressure detection
MSZ 4929-1976 Metal curl detection
MSZ 18097/2-1984 Detection of metals, alloys, metallic and non-metallic organic coatings. Anticorrosive testing in salt spray (ASS method)
MSZ 18097/3-1984 Detection of metals, alloys, metallic and non-metallic organic coatings Anti-corrosion testing in acid mist (CASS method)
MSZ 18097/1-1984 Detection of metals, alloys, metallic and non-metallic organic coatings. Anticorrosive testing in salt spray (NSS method)
MSZ 9650/13-1977 Decorative raw material testing
MNOSZ 5397-1952 Paper raw material testing
MNOSZ 8241-1954 Paper raw material testing
MSZ 5999/2.lap-1963 Steel and metal technology testing. Test line
MSZ 15432-1970 Metal powder detection method
MSZ 5772-1964 Steel and metal technology testing. Comprehensive testing
MNOSZ 5398-1953 Paper manufacturing raw material testing
MSZ 4312/1-1978 MSZ 4312/1-78 weldability testing of aluminum and aluminum alloys. Basic raw material thermal sensitivity testing
MSZ 15435-1971 Metal powder detection method
MSZ 5731-1968 Technical testing of steel and metals. Disk and Column Inspection
MNOSZ 19818-1954 Inspection of precious metal semi-finished products
MNOSZ 4713-1955 Concrete basic raw material testing
MSZ 5702-1966 Comprehensive testing of steel and metals
MSZ 12757/2-1976 MSZ 12757/2-76 raw material ore testing. Heat loss detection

Danish Standards Foundation

DS/EN 444:1994 Non-destructive testing-General principles for radiographic examination of metallic materials by X-and gamma-rays
DS/EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
DS/EN ISO 17635:2010 Non-destructive testing of welds - General rules for metallic materials
DS/EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid

SCC

VDI/VDE 2616 BLATT 1-2012 Hardness testing of metallic materials
DANSK DS/EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
AENOR UNE-EN 13068-3:2002 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
UNE-EN 444:1995 NON-DESTRUCTIVE TESTING. GENERAL PRINCIPLES FOR RADIOGRAPHIC EXAMINATION OF METALLIC MATERIALS BY X-AND GAMMA RAYS
NS-EN 444:1994 Non-destructive testing — General principles for radiographic examination of metallic materials by X- and gamma-rays
NS-EN 13068-3:2001 Non-destructive testing — Radioscopic testing — Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
BS EN 444:1994 Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma-rays
DANSK DS/EN 444:1994 Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
NS-EN 15856:2010 Non-destructive testing — Acoustic emission — General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
UNE-EN 12062:1997 NON-DESTRUCTIVE EXAMINATION OF WELDS. GENERAL RULES FOR METALLIC MATERIALS.
ASD-STAN prEN 2002-016:1970 Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing
NS-EN 12062:1997 Non-destructive examination of welds — General rules for metallic materials
08/30165680 DC BS EN 15856. Non-destructive testing. Acoustic emission. General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
AENOR UNE-EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
DANSK DS/EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
DIN EN 12062 E:2007 Draft Document - Non-destructive testing of welds - General rules for metallic materials; German version prEN 12062:2007
UNE-EN ISO 17635:2010 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2010)
DANSK DS/EN ISO 17635:2016 Non-destructive testing of welds – General rules for metallic materials (ISO 17635:2016)
07/30140373 DC BS EN 12062. Non-destructive testing of welds. General rules for metallic materials
NS-EN ISO 17635:2016 Non-destructive testing of welds — General rules for metallic materials (ISO 17635:2016)
NS-EN ISO 17635:2010 Non-destructive testing of welds — General rules for metallic materials (ISO 17635:2010)
AENOR UNE-EN ISO 17635:2017 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016)

Association of German Mechanical Engineers

VDI/VDE 2616 Blatt 1-2002 Hardness testing of metallic materials

United States Navy

NAVY MIL-E-17568 C-1980 EMBROIDERY MATERIALS, METALLIC AND SYNTHETIC METALLIC

BR-ABNT

ABNT MB-60-1980 Brinell hardness testing of metal materials
ABNT MB-4-1953 Metal material pressure detection. Brazilian Standard

YU-JUS

JUS B.C1.018-2001 Puzzolanic materials - constituents for cement production Classification, technical conditions and test methods
JUS B.C1.017-2001 Slag - constituent for cement production Classification, technical conditions and test methods
JUS B.C1.019-2001 Limestone - constituent for cement production Classification, technical conditions and test methods
JUS C.A4.019-1986 Mechanlcal testing ofmetals. VVrapping test of wire
JUS C.Z2.152-1988 Scrap and secondary raw matorial of non-ferrous metals and alloys. Scrap and secondary ran material of copper and copper alloys. Designation and characteristics
JUS C.Z2.150-1988 Scrap and secondary raw material of non-ferrous metals and non-ferrous allr^/s. Terms, definitions and classification
JUS C.N2.003-1986 Mechanical testing of meta/s. Sintered metal materials, excluding hardmetals — Unnotched impact test piece
JUS C.Z2.153-1988 Scrap and secondary rawjnaterial of non-ferrcus metals and alloys.Scrap and secondar/ raw material of aluminium and aluminium alloys. Designation and characteristics

U.S. Military Regulations and Norms

ARMY MIL-HDBK-212-1958 GASKET MATERIALS (NONMETALLIC)
ARMY MIL-HDBK-212 VALID NOTICE 1-1988 GASKET MATERIALS (NONMETALLIC)

CH-SNV

VSM 18727.2-1965 Metal material inspection fillet weld testing
SN ISO 4603:1983 Corrosion resistant stainless steel fasteners — Specifications
VSM 77131-1971 Material inspection. metallic material. Notch impact test
SNV 81126-1958 Non-ferrous heavy metal cast iron alloy. Material inspection, test rods

German Institute for Standardization

DIN 50905-1:1987 Corrosion of metals; corrosion testing; principles
DIN EN 13068-3:2001-12 Non-destructive testing - Radioscopic testing - Part 3: General principles for the radioscopic testing of metallic materials by X- and gamma rays; German version EN 13068-3:2001
DIN 50131:1974 Testing of Metallic Materials; Determination of Shrinkage
DIN 51212:1978 Testing of Metallic Materials; Torsion Test of Wires
DIN 51211:1978 Testing of Metallic Materials; Reverse Bend Test of Wires
DIN EN ISO 17635:2017-04 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016); German version EN ISO 17635:2016
DIN-Fachbericht ISO/TR 581:2007 Weldability - Metallic materials - General principles; German version ISO/TR 581:2005
DIN EN 15856:2010-05 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid; German version EN 15856:2010
DIN 50134:2008-10 Testing of metallic materials - Compression test of metallic cellular materials
DIN V 30995:1999 Sintered metal materials, excluding hardmetals - Metallographic preparation and examination (ISO/TR 14321:1997)
DIN 50141:1982 Testing of metals; Shear test
DIN 50106:1978 Testing of Metallic Materials; Compression Test
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011

Japanese Industrial Standards Committee (JISC)

JIS T 0304:2002 Testing method for metal release from metallic biomaterials
JIS T 6004:2012 Dental metallic materials -- Test methods

British Standards Institution (BSI)

BS EN 444:1994(1999) Non - destructive testing — General principles for radiographic examination of metallic materials by X - and gamma - rays
BS EN 13068-3:2001(2008) Non-destructive testing - Radioscopic testing - General principles of radioscopic testing of metallic materials by X- and gamma rays
BS EN 13068-3:2001 Non-destructive testing - Radioscopic testing - General principles of radioscopic testing of metallic materials by X- and gamma rays
BS EN 60811-202:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of thickness of non-metallic sheath
BS EN ISO 17635:2016 Non-destructive testing of welds. General rules for metallic materials
BS EN 2002-16:2019 Aerospace series. Metallic materials. Test methods - Non-destructive testing. Penetrant testing
BS EN ISO 5579:2013 Non-destructive testing. Radiographic testing of metallic materials using film and X- or gamma rays. Basic rules
BS EN 10204:2004 Metallic materials - Types of inspection documents
BS ISO 21608:2012 Corrosion of metals and alloys. Test method for isothermalexposure oxidation testing under high-temperature corrosion conditions for metallic materials
BS ISO 11257:2022 Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization

RO-ASRO

STAS 2769-1990 Ferrous, non-ferrous, rare and precious prepared and raw ores. General rules for quality checking up and analysis results establishment
STAS 6718-1985 Tests of metals TENSILE TESTING OF TUBES
STAS 9018-1984 Metal testing TESTING OF DEPOSITED METAL FOR BRAZE WELDING
STAS 6638-1987 Metals tcsting HIGH TEmpEratuResTEns1lE tEst of mEtaiLEc matEriat.s
STAS 6951-1976 Tests of metals TENSILE TESTING OF WIRE
STAS 10221-1983 TESTING OF METALS Hot tracking of deposited metal by welding

PL-PKN

PN H15715-09-1987 Secondarys raws of nonferrous metals Cadmium scrap
PN H15715-04-1991 Secondary raw non-ferrous metals Aluminium and aluminium alloys scraps

Society of Automotive Engineers (SAE)

SAE AMS7025-2021 Metal Powder Feedstock Size Classifications
SAE AMS2628C-2024 Enhanced Ultrasonic Immersion Inspection for Titanium Alloy and other Metal Alloy Billets

Association Francaise de Normalisation

NF EN 13068-3:2002 Non-destructive testing - Fluoroscopy inspection - Part 3: general principles of fluoroscopy inspection using X and gamma rays of metallic materials
NF A09-201:1994 Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma rays.
NF EN ISO 17635:2017 Contrôle non destructif des assemblages soudés - Règles générales pour les matériaux métalliques
NF A89-500:2010 Non-destructive testing of welds - General rules for metallic materials.
NF A89-203*NF EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests.
NF A89-500*NF EN ISO 17635:2017 Non-destructive testing of welds - General rules for metallic materials
NF T30-200:1981 Paints. Paints for children. Detection of metals soluble in hydrochloric acid.
NF A09-356*NF EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
NF A09-201*NF EN ISO 5579:2014 Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules

AENOR

UNE-EN 13068-3:2002 NON-DESTRUCTIVE TESTING - RADIOSCOPIC TESTING - PART 3: GENERAL PRINCIPLES OF RADIOSCOPIC TESTING OF METALLIC MATERIALS BY X-AND GAMMA RAYS.
UNE 84067:1987 COSMETIC RAW MATERIALS. METAL STEARATES. DETERMINATION OF SIEVE ANALYSIS
UNE 7425:1986 METALLIC MATERIALS. WIRE. WRAPPING TEST.
UNE-EN ISO 17635:2017 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016)
UNE-EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid

Korean Agency for Technology and Standards (KATS)

KS M 6584-2008 Standard test method for rubber－Determination of metal content by Flame Atomic Absorption(AAS) analysis
KS D 0002-1975 General rules for inspection of non-ferrous metal materials
KS D 0002-2021 General rules for inspection of non-ferrous metal materials
KS D 0002-1986 General rules for inspection of non-ferrous metal materials
KS D 0002-1975(2021) General rules for inspection of non-ferrous metal materials
KS D ISO TR 14321:2011 Sintered metal materials, excluding hardmetals-Metallographic preparation and examination
KS B ISO 17635:2021 Non-destructive testing of welds — General rules for metallic materials
KS E ISO 11258-2022 Iron ores for shaft direct-reduction feedstocks－Determination of the reducibility index, final degree of reduction and degree of metallization
KS E ISO 11258-2017(2022) Iron ores for shaft direct-reduction feedstocks－Determination of the reducibility index, final degree of reduction and degree of metallization
KS E ISO 11257-2022 Iron ores for shaft direct-reduction feedstocks－Determination of the low-temperature reduction-disintegration index and degree of metallization

Lithuanian Standards Office

LST EN 13068-3-2002 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
LST EN 444-1998 Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
LST EN 15856-2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
LST EN ISO 17635:2010 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2010)

European Committee for Standardization (CEN)

prEN 444-1992 Non-destructive testing; general principles for radiographic examination of metallic materials by X- and gamma-rays
EN 1321:1996 Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds
prEN ISO 17635 rev Non-destructive testing of welds - General rules for metallic materials
EN 10204:2004 Metallic products - Types of inspection documents
EN 444:1994 Non-Destructive Testing - General Principles for Radiographic Examination of Metallic Materials by X- and Gamma-Rays

International Organization for Standardization (ISO)

ISO/CD 17635:2023 Non-destructive testing of welds — General rules for metallic materials
ISO/DIS 17635:2018 Non-destructive testing of welds — General rules for metallic materials
ISO/TR 581:2005 Weldability - Metallic materials - General principles
ISO 17635:2016 Non-destructive testing of welds - General rules for metallic materials
ISO 5173:2023 Destructive tests on welds in metallic materials — Bend tests
ISO 5173:2009 Destructive tests on welds in metallic materials - Bend tests
ISO/CD TR 12105 Metallic materials — Fatigue testing — General principles
ISO/TR 14321:1997 Sintered metal materials, excluding hardmetals - Metallographic preparation and examination
ISO 11258:1999 Iron ores - Determination of reducibility and metallization of feedstock for direct reduction by gas reforming processes
ISO 21608:2012 Corrosion of metals and alloys - Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials

RU-GOST R

GOST R 53218-2008 Organic fertilizers. Atomic-absorption method for determination of heavy metals content

GSO

GSO ISO/TR 581:2008 Weldability - Metallic materials - General principles
OS GSO ISO/TR 581:2008 Weldability - Metallic materials - General principles
GSO ISO 23788:2015 Metallic materials -- Verification of the alignment of fatigue testing machines
OS GSO ISO 11258:2013 Iron ores for shaft direct-reduction feedstocks -- Determination of the reducibility index, final degree of reduction and degree of metallization
BH GSO ISO 11257:2016 Iron ores for shaft direct-reduction feedstocks -- Determination of the low-temperature reduction-disintegration index and degree of metallization

SE-SIS

SIS SS 11 01 03-1985 Inspection of metal products for material characteristics
SIS SS 11 26 58-1983 Metallic materials - Wire - Wrapping test

KR-KS

KS B ISO 17635-2021 Non-destructive testing of welds — General rules for metallic materials

GOSTR

GOST ISO 17635-2018 Non-destructive testing of welds. General rules for metallic materials

Indonesia Standards

SNI ISO 17635:2012 Non-destructive testing of welds - General rules for metallic materials

Defense Logistics Agency

DLA A-A-59119-1997 LAPPING MACHINES, METAL WORKING, HIGH-PRECISION, FLAT SURFACE
DLA A-A-59119 VALID NOTICE 1-2003 LAPPING MACHINES, METAL WORKING, HIGH-PRECISION, FLAT SURFACE

BE-NBN

NBN-EN 10204-1991 Metal products. Type of inspection data

FI-SFS

SFS 2902-1978 Copper metal products. Scientific delivery deadlines, sampling and raw material testing

CEN - European Committee for Standardization

EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid

ES-UNE

UNE-EN 2078:2001 Aerospace series- Metallic materials- manufacturing schedule, inspection schedule, inspection and test report- Definition, general principles, preparation and approval. (Endorsed by AENOR in February of 2002.)