In most laboratory experiments

In most laboratory experiments, Total:409 items.

The international standard classification for "In most laboratory experiments" includes: Product and company certification. Conformity assessment , Laboratory medicine , Corrosion of metals , Laboratory ware and related apparatus , Analytical chemistry in general , Test conditions and procedures in general , Geology. Meteorology. Hydrology .

The Chinese standard classification for "In most laboratory experiments" includes: Medical apparatus and devices in general , Standardization and Quality Management , Medical laboratory equipment , Metal chemical property test method , Physical property analyzer , Electrochemical, thermochemistry and optical profile type analyzer , Basic standards and general methods , Meteorology , Office supplies and office implements , Actuator .

Group Standards of the People's Republic of China

T/CAGR 010-2023 Guidelines for laboratory examination of multiple myeloma
T/CAQI 384-2024 Medical laboratories Data item code
T/CASME 615-2023 Laboratory requirements for small and medium-sized food enterprises
T/CITS 0020-2023 Guidelines for the construction of digital laboratories
T/CITS 0019-2023 Specification for grade evaluation of digital laboratories
T/LAIA 01-2024 Green Testing Laboratory Evaluation of Chemical Testing Laboratory
T/QGCML 076-2020 Laboratory safety education and training system
T/BBDA 001-2023 Construction and implementation guidelines for big data training laboratory
T/LZZLXH 057-2021 Technical specification for laboratory equipment in primary and secondary schools

未注明发布机构

DIN 12918-2 E:2008-03 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN EN ISO 22367 E:2019-04 Application of medical laboratory risk management in medical laboratories (draft)
SAE J3130-2023 Laboratory Measurement of Vibration Damping Properties Using Mechanical Impedance Method at the Center of a Bar
PD ISO/TS 23824:2024 Medical laboratories — Guidance on application of ISO 15189 in anatomic pathology
GJB 15481-2001 General requirements for competence of testing and calibration laboratories

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22275.7-2008 Requirements of conduct for good laboratory practice - Part 7: The application of the GLP principles to the organisation and management of multi-site studies
GB/T 22275.3-2008 Requirements of conduct for good laboratory practice - Part 3: Compliance of laboratory suppliers with GLP principles
GB/T 29477-2012 General technical specification for mobile laboratory shelter
GB/T 4157-2006 Laboratory testing of metals for resistance to specific forms of environmental cracking in H2S environments
GB/T 22273-2008 Advisory document for good laboratory practice:The application of the principles of GLP to in vitro studies
GB/T 22277-2008 Advisory document for good laboratory practice - The role and responsibilities of the sponsor in the application of the principles of GLP
GB/T 22275.6-2008 Requirements of conduct for good laboratory practice - Part 6: The application of the principles of GLP to computerised systems
GB/T 43278-2023 Medical laboratories—Application of risk management to medical laboratories
GB/T 22275.4-2008 Requirements of conduct for good laboratory practice - Part 4: The application of the GLP principles to field studies
GB/Z 30154-2013 Medical laboratories—Guidance on laboratory implementation of GB/T 22576—2008
GB/T 22275.5-2008 Requirements of conduct for good laboratory practice - Part 5: The application of the GLP principles to short term studies
GB/T 11165-1989 Laboratory pH meter
GB/T 11165-2005 pH meter

National Metrological Verification Regulations of the People's Republic of China

JJG(烟草) 21-2021 Tobacco Laboratory Atmospheric Environment
JJG(烟草) 21-2010 Tobacco-verification Regulation of Atmosphere Condition for Laboratory
JJG(烟草)21-2010 Tobacco—Verification Regulation of Atmosphere Condition for Laboratory
JJG(烟草)21-2021 Atmosphere Condition for Tobacco Laboratory

Sichuan Provincial Standard of the People's Republic of China

DB51/T 692-2018 Technical specifications for laboratory equipment in primary and secondary schools
DB51/T 2370-2017 Specifications for the construction of mathematics inquiry laboratories in primary and secondary schools
DB51/T 1777-2014 Specifications for the Construction of Digital Laboratories in Middle Schools

Professional Standard - Machinery

JB/T 6245-1992 Laboratory ionometer
JB/T 7439.6-1994 Terminology relating to laboratory instruments - Laboratory centrifuge

Military Standard of the People's Republic of China-General Armament Department

GJB 2725-1996 General requirements for calibration laboratories and testing laboratories
GJB 2725A-2001 General requirements for testing laboratories and calibration laboratories

Professional Standard - Public Safety Standards

GA/T 1780-2021 Specifications for construction of polygraph testing laboratory

Professional Standard - Agriculture

水产品质量安全检验手册 1.1.1.2-2005 Chapter 1 General Introduction Section 1 Laboratory Management 1. Laboratory Layout and Indoor Facilities Requirements (2) Laboratory Layout
JJG(烟草) 21-2003 Tobacco Laboratory Testing Regulations for Strong Wind Environment
CNAS-AL23-2020 Relationship between good laboratory practice and laboratory accreditation
水产品质量安全检验手册 1.1.1.3-2005 Chapter 1 General Introduction Section 1 Laboratory Management 1. Laboratory Layout and Indoor Facilities Requirements (3) Laboratory Ventilation System
水产品质量安全检验手册 1.1.1.1-2005 Chapter 1 General Introduction Section 1 Laboratory Management 1. Laboratory layout and indoor facility requirements (1) Laboratory location selection

Professional Standard - Meteorology

QX/T 220-2013 Technical requirements for metrology laboratory of atmospheric pressnre

National Metrological Technical Specifications of the People's Republic of China

JJF 1575-2016 Program of Pattern Evaluation of Laboratory pH Meters

Shandong Provincial Standard of the People's Republic of China

DB37/T 3995-2020 Pine Pollen Polysaccharide Laboratory Extraction Technical Regulations
DB37/T 4003-2020 Neutralization test and ELISA test comparison laboratory evaluation standard

国家质量监督检验检疫总局

SN/T 2294.7-2016 Inspection and Quarantine Laboratory Management Part 7: Laboratory Naming Rules

Professional Standard - Education

JY/T 0385-2006 Standard for Science Lab Equipment in Primary & Secondary Schools

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 1246-2017 Equipment specifications for science laboratories in primary and secondary schools

Liaoning Provincial Standard of the People's Republic of China

DB21/T 1990-2012 General Technical Conditions for Mobile Laboratory Experiment Cabin

机械工业部

JB 6245-1992 Laboratory ion meter

Professional Standard - Certification and Accreditation

RB/T 137-2023 General data specifications for laboratory proficiency testing business

工业和信息化部/国家能源局

JB/T 6245-2017 Laboratory ion meters

Professional Standard - Geology

DZ/T 0016-1991 Shaking table for laboratory

Taiwan Provincial Standard of the People's Republic of China

CNS 8176-1981 Metal Laboratory Ware Clamps

Professional Standard - Commodity Inspection

SN/T 4239-2015 Management requirements for large equipment of chemical analysis in laboratory

International Organization for Standardization (ISO)

ISO 22367:2020 Medical laboratories — Application of risk management to medical laboratories
ISO/TR 18112:2006 Clinical laboratory testing and in vitro diagnostic test systems - In vitro diagnostic medical devices for professional use - Summary of regulatory requirements for information supplied by the manufacturer
ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories
ISO/DTS 23824:2024 Medical laboratories - Guidance on application of ISO 15189 in anatomic pathology
ISO/TR 22869:2005 Medical laboratories - Guidance on laboratory implementation of ISO 15189:2003
ISO 7787-1:2016 Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters
ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples

GOST

GOST R ISO 22367-2022 Medical laboratories. Application of risk management to medical laboratories
GOST 22733-1977 Soils. A laboratory method for determining maximum density

European Committee for Standardization (CEN)

EN ISO 22367:2020 Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020)
EN 16101:2012 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
EN ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003)
HD 249.2 S1-1981 Laboratory resistors; part 2: laboratory a.c. resistors
CEN PREN 14727-2003 Laboratory furniture - Storage units for laboratories - Requirements and test methods
EN 16205:2013 Laboratory measurement of walking noise on floors
EN 16205:2020 Laboratory measurement of walking noise on floors

British Standards Institution (BSI)

BS EN ISO 22367:2020 Medical laboratories. Application of risk management to medical laboratories
19/30391662 DC BS ISO 22367. Medical laboratories. Application of risk management to medical laboratories
PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
BS EN IEC 60477-1:2022 Laboratory resistors. Laboratory DC resistors
BS EN ISO 7787-1:2016 Dentistry. Laboratory cutters. Steel laboratory cutters
BS EN IEC 60477-2:2022 Laboratory resistors. Laboratory AC resistors
BS EN ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories
BS EN 60477-2:1999 Laboratory resistors - Laboratory a.c. resistors
BS EN 60477-2:1980 Laboratory resistors. Laboratory a.c. resistors
BS EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
BS EN 14727:2006 Laboratory furniture. Storage units for laboratories. Requirements and test methods
BS EN ISO 16140-4:2020 Microbiology of the food chain. Method validation - Protocol for method validation in a single laboratory
BS ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples

Association Francaise de Normalisation

NF S92-081*NF EN ISO 22367:2020 Medical laboratories - Application of risk management to medical laboratories
NF ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
XP X15-300*XP CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
XP CEN/TS 17441:2020 Laboratory installations - Laboratory ventilation systems
NF EN ISO 22367:2020 Medical biology laboratories - Application of risk management to medical biology laboratories
NF S92-062:2004 Laboratory medicine - Requirements for reference measurement laboratories.
NF X31-114*NF ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
NF X15-202:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods.
NF EN IEC 60477-2:2022 Laboratory resistors - Part 2: Alternating current laboratory resistors
NF B35-802:1972 Laboratory glassware. Laboratory crucibles (porcelain and silica).
NF EN IEC 60477-1:2022 Laboratory resistors - Part 1: DC laboratory resistors
NF S91-116-1*NF EN ISO 7787-1:2016 Dentistry - Laboratory cutters - Part 1 : steel laboratory cutters
FD S91-017*FD ISO/TR 15599:2002 Digital codification of dental laboratory procedures
FD ISO/TR 15599:2002 Codification numérique des procédures au laboratoire dentaire
NF B35-801:1972 Laboratory glassware. Porcelain laboratory apparatus. Quality and methods of test.

SCC

AWWA WQTC55068 Scaling Laboratory Arsenic Removal Data for Porous Sorbents to the Pilot-Scale
DANSK DS/ISO 22367:2020 Medical laboratories – Application of risk management to medical laboratories
AWWA QTC97159 Challenges of QC/QA in Multi-Laboratory Research Project
DANSK DS/EN ISO 22367:2020 Medical laboratories – Application of risk management to medical laboratories (ISO 22367:2020)
NS-EN ISO 22367:2020 Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020)
AWWA WQTC60643 Implementation of an Ethics Program at a Large Environmental Laboratory
CAN/CSA-ISO 22367-2021 Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020, IDT)
DANSK DS/ISO/TR 22869:2005 Medical laboratories – Guidance on laboratory implementation of ISO 15189:2003
DANSK DS/CEN/TS 17441:2020 Laboratory installations – Ventilation systems in laboratories
BS PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
SN-CEN/TS 17441:2020 Laboratory installations — Ventilation systems in laboratories
AWWA WQTC62457 Interlaboratory Validation of EPA Method 1103.1 (mTEC) for E. coli in Wastewater Effluent
DIN EN ISO 22367 E:2019 Draft Document - Medical laboratories - Application of risk management to medical laboratories (ISO/DIS 22367:2019); German and English version prEN ISO 22367:2019
AWWA WSC70019 Laboratory Emergency Response: Screening of Unknown Contaminants in the Field and in the Lab
AWWA WQTC57030 A Large Team-Based Environmental Lab -- Seven Years Later
AWWA JAW57847 Journal AWWA — Metaphosphate Reversion in Laboratory and Pipe-Rig Experiments
AWWA WSC70018 Water Laboratory Alliance: A Focus on Laboratory Response
AWWA WQTC71353 Real-time PCR Compared with Culture Method for the Analysis of Legionella in Cooling Towers: A Routine Lab View
DANSK DS/ISO/TS 23824:2024 Medical laboratories – Guidance on application of ISO 15189 in anatomic pathology
AWWA ACE70744 Bench-Scale Studies on the Use of Pre-Formed Chloramines in Seawater Desalination
BS PD ISO/TS 23824:2024 Medical laboratories. Guidance on application of ISO 15189 in anatomic pathology
BS 3202:1959 Recommendations on laboratory furniture & fittings
CSA C22.2 No.151-1979 Laboratory Equipment
SPC GB/T 36917.1-2018 Dentistry -- Laboratory cutters -- Part 1: Steel laboratory cutters (TEXT OF DOCUMENT IS IN CHINESE)
AWWA WQTC60640 Laboratory Ethics
CSA C22.2 No.151-M1986-1986(R2004) Laboratory Equipment
AS 2982:1987 Laboratory construction
BS 914:1940 Laboratory porcelain
ASSP/AIHA Z9.5-2022 Laboratory Ventilation
CSA C22.2 No.151-M1986-1986(C2004) Laboratory equipment
AENOR UNE-ISO/TR 22869 IN:2007 Clinical laboratories. Guide for the implementation in laboratories of the ISO 15189:2003 Standard. (ISO/TR 22869:2005)
CSA Z316.1-M1979-1979 Laboratory Water Baths
ASSP/AIHA Z9.11-2008 Laboratory Decommissioning
AWWA WQTC60597 Interlaboratory Validation of US EPA Method 1603 (Modified mTEC) for Escherichia coli in Wastewater Effluent
AWWA WQTC71356 Key Steps to Follow in Replacing a LIMS (Laboratory Information Management System) in Your Laboratory: A Case Study of a Water Quality Laboratory
DANSK DS/EN ISO 7787-1:2016 Dentistry – Laboratory cutters – Part 1: Steel laboratory cutters
CEI EN IEC 60477-1:2022 Laboratory resistors Part 1: Laboratory DC resistors
DANSK DS/EN 60477-2+A1:1998 Laboratory resistors – Part 2: Laboratory a.c. resistors
DANSK DS/EN IEC 60477-1:2022 Laboratory resistors – Part 1: Laboratory DC resistors
CEI EN IEC 60477-2:2022 Laboratory resistors Part 2: Laboratory AC resistors
SPC GB/T 36917.2-2018 Dentistry -- Laboratory cutters -- Part 2: Carbide laboratory cutters (TEXT OF DOCUMENT IS IN CHINESE)
DANSK DS/EN IEC 60477-2:2022 Laboratory resistors – Part 2: Laboratory AC resistors
ASTM Adjunct E691-01 Program to Compute the Within-Lab and Between-Lab Variation of a Test Method from an Interlaboratory Round Robin Study
AWWA QTC98381 Coliforms in Distribution — Are Laboratory Based Studies Appropriate?
AWWA MTC64577 Assessment of the Efficiency of Air-Water Flushing for the Removal of Biomass from Surfaces in a Laboratory Test
CAN 2-38.7-M79-1979 Cotton coats for men (doctors and laboratory technicians)
AWWA JAW34264 Journal AWWA — Getting the Most From a Contract Laboratory
CEI EN 60477-2:1997 Resistori da laboratorio - Parte 2: Resistori da laboratorio per corrente alternata
DANSK DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
NS-EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
AWWA WQTC64127 Bench-scale and Pilot-scale Experiments to Investigate Geosmin Removal Options

German Institute for Standardization

DIN EN ISO 22367:2020 Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020)
DIN EN ISO 22367:2020-09 Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020); German version EN ISO 22367:2020
DIN 12480:2009 Laboratory glassware - Three-neck bottles - Woulff bottles
DIN CEN/TS 17441:2020-07 Laboratory installations - Ventilation systems in laboratories; German version CEN/TS 17441:2020
DIN 12916:1995 Laboratory furniture - Large size tiles for laboratory bench tops
DIN V 12900-3:2001 Laboratory data communication - Part 3: Device profiles for laboratory apparatus
DIN 12915:1994-02 Laboratory furniture; sinks for laboratory benches
DIN EN ISO 15195:2004 Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003); German version EN ISO 15195:2003
DIN 12915:1994 Laboratory furniture; sinks for laboratory benches
DIN 12785:1977 Laboratory glassware; special purpose laboratory thermometers
DIN 12912:1977 Laboratory furniture; ceramic tiles for laboratory bench tops
DIN 12918-1:1999 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN EN 60477-2:1999 Laboratory resistors - Part 2: Laboratory a.c. resistors (IEC 60477-2:1979 + A1:1997); German version EN 60477-2:1997 + A1:1997
DIN 12918-1:1999-05 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN 12876-3:2001 Electrical laboratory devices - Laboratory circulators and baths - Part 3: Determination of ratings of laboratory baths
DIN 12918-2:2009 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN 12918-2:2009-09 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN 30665-1:1982 Gas-appliances; gas-burners for laboratory use (laboratory burners)
DIN 12918-2:2002 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN 12876-3:2001-12 Electrical laboratory devices - Laboratory circulators and baths - Part 3: Determination of ratings of laboratory baths
DIN 12847-2:2000-05 Laboratory glassware - Haemacytometer counting chambers - Rulings
DIN 12785 Bb.1:1978 Laboratory glassware; special purpose laboratory thermometers, additional remarks
DIN 12918-4:2004-11 Laboratory equipment - Laboratory fittings - Part 4: Valves for pure gases
DIN 12918-4:2004 Laboratory equipment - Laboratory fittings - Part 4: Valves for pure gases
DIN EN ISO 20200:2005 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200:2004); English version of DIN EN ISO 20200

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE TO-98-15-1-1998 Experimental Validation of Thermal and Pressure Models in a Laboratory Simulator
ASHRAE CH-99-13-4-1999 Commercial-Scale University HVAC Laboratory
ASHRAE HVAC APPLICATIONS SI CH 14-2003 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 13-1999 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 14-2003 Laboratories
ASHRAE HVAC APPLICATIONS SI CH 13-1999 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 16-2011 LABORATORIES
ASHRAE HVAC APPLICATIONS IP CH 16-2015 LABORATORIES
ASHRAE HVAC APPLICATIONS SI CH 16-2011 LABORATORIES
ASHRAE HVAC APPLICATIONS SI CH 14-2007 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 14-2007 Laboratories
ASHRAE HVAC APPLICATIONS SI CH 16-2015 LABORATORIES
ASHRAE DE-93-21-1993 Energy Conservation in Laboratory Systems
ASHRAE DE-93-18-1993 Determining Diversity Factor for VAV Laboratories
ASHRAE CH-99-7-3-1999 Design Considerations of a Large Central Laboratory Exhaust
ASHRAE LO-09-076-2009 The Role of Plants in the Reduction of Heat Flux through Green Roofs: Laboratory Experiments
ASHRAE CH-03-8-2-2003 Experimental Heat Transfer Coefficients of CO2 in a Microchannel Evaporator
ASHRAE SE-99-7-1-1999 Floor-Supply Displacement Air-Conditioning: Laboratory Experiments
ASHRAE HVAC APPLICATIONS SI CH 13-1995 Laboratory Systems
ASHRAE HVAC APPLICATIONS IP CH 13-1995 Laboratory Systems
ASHRAE AT-96-9-2-1996 Influence of Heat Load on Selection of Laboratory Design Parameters and Dynamic Performance of Laboratory Environment
ASHRAE CH-95-15-1995 Numerical and Experimental Room Air Motion Studies

VE-FONDONORMA

NORVEN 76-44-1966 Bend test in concrete pipe laboratory
NORVEN 76-58-1966 Mixing methods of concrete in the laboratory

Korean Agency for Technology and Standards (KATS)

KS P ISO 22367-2023 Medical laboratories — Application of risk management to medical laboratories
KS P ISO TR 22869-2009(2019) Medical laboratories－Guidance on laboratory implementation of KS P ISO 15189：2006
KS P ISO TR 22869-2019 Medical laboratories－Guidance on laboratory implementation of KS P ISO 15189：2006
KS C IEC 60477-2013(2018) Laboratory resistors－Laboratory d.c. resistors
KS C IEC 60477-2023 Laboratory resistors－Laboratory d.c. resistors
KS P ISO 15195:2007 Laboratory medicine-Requirements for reference measurement laboratories
KS F 2312-2022 Test method for soil compaction in laboratory
KS F 2312-1986 Test method for soil compaction in laboratory
KS P ISO 15195-2014(2019) Laboratory medicine — Requirements for reference measurement laboratories
KS C IEC 60477:2013 Laboratory resistors－Laboratory d.c. resistors
KS P ISO 15195:2014 Laboratory medicine — Requirements for reference measurement laboratories
KS C IEC 61229:2017 Rigid protective covers for live working on a.c. installations
KS C IEC 60477-2-2013(2018) Laboratory resistors－Part 2：Laboratory a.c. resistors
KS P ISO TR 18112:2009 Clinical laboratory testing and in vitro diagnostic test systems-In vitro diagnostic medical devices for professional use-Summary of regulatory requirements for information supplied by the manufacturer
KS P ISO TR 22869:2009 Medical laboratories－Guidance on laboratory implementation of KS P ISO 15189：2006
KS C IEC 60477-2-2023 Laboratory resistors－Part 2：Laboratory a.c. resistors
KS P ISO TR 15599:2019 Digital codification of dental laboratory procedures
KS I ISO 23909-2009(2019) Soil quality－Preparation of laboratory samples from large samples
KS I ISO 23909-2023 Soil quality－Preparation of laboratory samples from large samples
KS I ISO 23909:2009 Soil quality－Preparation of laboratory samples from large samples
KS C IEC 60477-2:2013 Laboratory resistors－Part 2：Laboratory a.c. resistors
KS P ISO 7787-1:2019 Dentistry — Laboratory cutters — Part 1: Steel laboratory cutters

ES-UNE

UNE-EN ISO 22367:2020 Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020)
UNE-EN IEC 60477-2:2022 Laboratory resistors - Part 2: Laboratory AC resistors (Endorsed by Asociación Española de Normalización in July of 2022.)
UNE-EN ISO 7787-1:2016 Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters (ISO 7787-1:2016)
UNE-EN IEC 60477-1:2022 Laboratory resistors - Part 1: Laboratory DC resistors (Endorsed by Asociación Española de Normalización in July of 2022.)

Standard Association of Australia （SAA）

AS ISO 22367:2021 Medical laboratories — Application of risk management to medical laboratories

Military Standards (MIL-STD)

DOD A-A-51289-1985 MAGNIFIER, (DENTAL LABORATORY)
DOD A-A-51101 B-1991 BEAKER, LABORATORY (BOROSILICATE GLASS)
DOD A-A-51358-1986 TONGS, LABORATORY
DOD A-A-51680-1987 BURNER, GAS, LABORATORY
DOD A-A-53020-1987 BEAD, LABORATORY
DOD MIL-T-36022 B VALID NOTICE 1-1990 TABLE, OPHTHALMIC LABORATORY
DOD A-A-51000-1985 RACK, TEST TUBE, LABORATORY
DOD A-A-53950-1989 RACK, TEST TUBE, LABORATORY
DOD A-A-50803 A-1986 SHAKING MACHINE, LABORATORY
DOD A-A-54127-1990 TUBE, DRYING, LABORATORY
DOD A-A-53665-1988 TRAY AND RACK, LABORATORY
DOD A-A-54895-1993 SOUND CHAMBER AND CUFF, BLOOD PRESSURE
DOD MIL-T-36022 B-1978 TABLE, OPHTHALMIC LABORATORY

US-FCR

FCR DOE 5000.2B-1992 MULTIPROGRAM LABORATORY APPRAISALS
FCR DOE 5000.1B-1992 INSTITUTIONAL PLANNING BY MULTIPROGRAM LABORATORIES
FCR VA 11 53 23-2011 LABORATORY REFRIGERATORS
FCR FED H-08-1 SEC 11602-1982 LABORATORY ACCESSORIES
FCR FED H-08-5 CHAP 240-1989 LABORATORY SERVICE
FCR FED H-08-1 SEC 12345-1982 LABORATORY FURNITURE
FCR FED H-08-9 CHAP 240-1986 LABORATORY SERVICE
FCR COE ER 70-1-6-1981 PRINCIPAL LABORATORY
FCR FED H-08-5 CHAP 210-1989 CARDIOVASCULAR LABORATORIES
FCR VA 11 53 13-2011 LABORATORY FUME HOODS
FCR FED H-08-9 CHAP 226-1979 ELECTROENCEPHALOGRAPHY LABORATORY
FCR FED H-08-1 SEC 11610-2002 LABORATORY FUME HOODS
FCR FED H-08-9 CHAP 210-1989 CARDIO VASCULAR LABORATORIES

American Society for Testing and Materials (ASTM)

ASTM E671-98(2004) Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
ASTM E671-98 Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
ASTM G162-18 Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils
ASTM E2935-16 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E2935-17 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D4697-95(2001) Standard Guide for Maintaining Test Methods in the User's Laboratory
ASTM E438-92(1996) Standard Specification for Glasses in Laboratory Apparatus
ASTM E438-92(2001)e1 Standard Specification for Glasses in Laboratory Apparatus
ASTM D6122-19a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM F551-09 Standard Practice for Using a 67.23-in. (1.707-m) Diameter Laboratory Test Roadwheel in Testing Tires
ASTM D6122-18 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM F551/F551M-16(2022) Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires
ASTM D6122-19b Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM E882-87(1998) Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
ASTM E882-87(2003) Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
ASTM D5114-90 Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
ASTM D5114/D5114M-90(2018)e1 Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
ASTM C1312-97(2003) Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
ASTM E671-98(2010) Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
ASTM C192/C192M-05 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM E2935-13 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D6796-02(2008) Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
ASTM D6796-02 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
ASTM G151-19 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM E691-09e1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E128-99(2011) Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
ASTM E2935-15 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E2935-14 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E898-88(2005) Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
ASTM D3856-95(2006) Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
ASTM D1632-17e1 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D1632-17 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D8470-22 Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems
ASTM E832-81(2003) Standard Specification for Laboratory Filter Papers
ASTM D8334/D8334M-20 Standard Practice for Sampling of Cannabis/Hemp Post-Harvest Batches for Laboratory Analyses
ASTM E2653-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM D8347-21a Standard Guide for Requirements for Analytical Laboratory Related Professions Within the Cannabis and Hemp Industries
ASTM D8347-21 Standard Guide for Certification Requirements for Analytical Laboratory Professional Vocations Within the Cannabis Industry
ASTM G162-23 Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils
ASTM D3551-02 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using a Mechanical Mixer
ASTM D3551-08 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
ASTM E128-99 Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use

GSO

GSO ISO 7056:2007 Plastics laboratory ware - Beakers
OS GSO ISO/TR 22869:2016 Medical laboratories -- Guidance on laboratory implementation of ISO 15189: 2003
GSO ISO 23909:2013 Soil quality -- Preparation of laboratory samples from large samples
GSO ISO/TR 22869:2016 Medical laboratories -- Guidance on laboratory implementation of ISO 15189: 2003
GSO ISO 15195:2012 Laboratory medicine -- Requirements for reference measurement laboratories
ISO/TS 23824:2024 Medical laboratories — Guidance on application of ISO 15189 in anatomic pathology
GSO 2145:2011 Laboratory Filter Papers
BH GSO 2145:2012 Laboratory Filter Papers
OS GSO 2145:2011 Laboratory Filter Papers
GSO ISO/TS 20612:2013 Water quality -- Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
OS GSO ISO/TS 20612:2013 Water quality -- Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
BH GSO ISO 23909:2016 Soil quality -- Preparation of laboratory samples from large samples
OS GSO ISO 23909:2013 Soil quality -- Preparation of laboratory samples from large samples
GSO IEC 60477-2:2015 Laboratory resistors. Part 2: Laboratory a.c. resistors
OS GSO IEC 60477-2:2015 Laboratory resistors. Part 2: Laboratory a.c. resistors
BH GSO IEC 60477-2:2016 Laboratory resistors. Part 2: Laboratory a.c. resistors
GSO OIML D30:2021 Guide for the application of ISO/IEC 17025 to the assessment of Testing Laboratories involved in legal metrology
BH GSO OIML D30:2022 Guide for the application of ISO/IEC 17025 to the assessment of Testing Laboratories involved in legal metrology
GSO OIML D30:2024 Guide for the application of ISO/IEC 17025 to the assessment of Testing Laboratories involved in legal metrology

US-CLSI

CLSI C28-A3c-2008 Defining, Establishing, and Verifying Reference Intervals in the Clinical laboratory
CLSI MM19-A-2011 Establishing Molecular Testing in Clinical Laboratory Environments; Approved Guideline

Canadian Standards Association (CSA)

CSA ISO 22367:2021 Medical laboratories - Application of risk management to medical laboratories (Adopted ISO 22367:2020, first edition, 2020-02)

ES-AENOR

UNE 43-343-1985 Laboratory glass. Laboratory sintered filters. Porous scale classification and designation
UNE 83-311-1986 Concrete experiment. Determination of setting time of concrete in experiments
UNE 43-347-1987 Laboratory glass. cup
UNE 66-800-1989 General provisions regarding skills in laboratory experiments

KR-KS

KS I ISO 23909-2009(2023) Soil quality－Preparation of laboratory samples from large samples
KS C IEC 60477-2013(2023) Laboratory resistors－Laboratory d.c. resistors
KS C IEC 61229-2017 Rigid protective covers for live working on a.c. installations
KS C IEC 60477-2-2013(2023) Laboratory resistors－Part 2：Laboratory a.c. resistors
KS P ISO TR 15599-2019 Digital codification of dental laboratory procedures
KS P ISO 7787-1-2019 Dentistry — Laboratory cutters — Part 1: Steel laboratory cutters

Indonesia Standards

SNI 8072-2016 Test method for measuring the potential for soil collapse in the laboratory
SNI 15-0575-1989 Laboratory glass
SNI 19-2968-1992 Language laboratories
SNI 04-3584-1994 Electrical energy meters, Test room
SNI 2848-2008 Procedure for testing objects in a rock mechanics laboratory

GOSTR

GOST R ISO/TR 22869-2009 Medical laboratories. Quidance on laboratory implementation of ISO 15189:2003

AASHTO - American Association of State Highway and Transportation Officials

R 39-2007 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
R 39-2017 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

DIN

DIN CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
DIN 50905-4:2018 Corrosion of metals - Corrosion testing - Part 4: Performance of chemical corrosion experiments without mechanical stresses in liquids in the laboratory

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE APPLICATION IP CH 16-2011 LABORATORIES
ASHRAE APP IP CH 14-2007 Laboratories

CZ-CSN

CSN 67 3091-1983 Laboratory tests of resistance of paint coatings in atmospherical conditíons
CSN 72 1015-1988 Laboratory determination of com- pactibility of soils
CSN 70 1022-1970 Laboratory determination of carbonates in soils

API - American Petroleum Institute

API PUBL 4395-1985 Laboratory Study on Solubilities of Petroleum Hydrocarbons in Groundwater

CO-ICONTEC

ICONTEC 1377-1980 Concrete, sample preparation and curing in the laboratory.

National Fire Protection Association (NFPA)

NFPA 99H CHAPTER 11-2002 Laboratories

SE-SIS

SIS SS 02 71 09-1989 Geotechnical tests — Compaction properties — Laboratory compaction

CU-NC

NC 26-212-1992 GOOD LABORATOY PRACTICES

CEN - European Committee for Standardization

EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures

TH-TISI

TIS 2277-2006 Laboratory medicine.requirements for reference measurement laboratories

American National Standards Institute （ANSI)

ANSI/AMCA 301-1990 Methods for Calculating Fan Sound Ratings from Laboratory Test Data
ANSI/ASTM E2653a:2009 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer than Six Participating Laboratories
ANSI/ASTM E2935:2013 Practice for Conducting Equivalence Testing in Laboratory Applications
ANSI/AIHA/ASSE Z9.5-2012 Laboratory Ventilation
ANSI/ASSE Z9.11-2016 Laboratory Decommissioning

RU-GOST R

GOST R ISO 15195-2006 Laboratory medicine. Requirements for reference measurement laboratories
GOST 22733-2016 Soils. Laboratory method for determining of maximum density
GOST R 53022.3-2008 Clinical laboratory technologies. Requirements of quality of clinical laboratory tests. Part 3. Assessment of laboratory tests clinical significance
GOST IEC 60477-2-2013 Laboratory resistors. Part 2. Laboratory a.c. resistors
GOST 33696-2015 Drilling fluids. Laboratory testing
GOST R ISO 23909-2013 Soil quality. Preparation of laboratory samples from large samples
GOST 30416-1996 Soils. Laboratory testing. General

AENOR

UNE-ISO/TR 22869:2007 IN Medical laboratories. Guidance on laboratory implementation of ISO 15189: 2003. (ISO/TR 22869:2005)
UNE-EN 12738:2000 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments
UNE 40248-5:1982 METHOD FOR DETERMINATION OF THE BUNDLE STRENGHT OF WOOL FIBRES. EXPERIENCE VALUES CONCERNING OF THE COEFFICIENT OF VARIATION WTHIN ET BETWEEN LABORATORIES, CONFIDENCE INTERVAL AND MAXIMUN DIFFERENCE BETWEEN TWO LABORATORIES
UNE-EN 60477-2/A1:1999 LABORATORY RESISTORS. PART 2: LABORATORY A.C. RESISTORS
UNE-EN 60477-2:1999 LABORATORY RESISTORS. PART 2: LABORATORY A.C. RESISTORS
UNE-EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods

Lithuanian Standards Office

LST EN 12738-2000 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments
LST EN 14727-2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods

Danish Standards Foundation

DS/EN 12738:2000 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments
DS/EN 60477-2+A1:1998 Laboratory resistors - Part 2: Laboratory a.c. resistors
DS/IEC 477-2:1981 Laboratory resistors. Part 2: Laboratory a.c. resistors
DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods

VN-TCVN

TCVN 5339-1991 Anti.Corrosive protection atmospherie laborator.General requirements
TCVN 4851-1989 Water for analytical laboratory use.Specifications and test methods

US-HHS

HHS 21 CFR PART 58-2011 GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES

Defense Logistics Agency

DLA A-A-53071-1987 OVEN, LABORATORY

VDI - Verein Deutscher Ingenieure

VDI 2051-1978 Ventilation of laboratories

HU-MSZT

MNOSZ 11 281-1952 Laboratory data series analysis measurements
MNOSZ 13960-1954 Thermometer for laboratory use. Sterilization thermometer (maximum)
MNOSZ 6628-1956 Laboratory sink for multiple workstations
MNOSZ 6624-1956 laboratory. water bath
MNOSZ 6610-1952 Laboratory work table. Common parts of multi-body joint construction
MNOSZ 6648-1952 laboratory flask rack

AT-ON

ONORM M 7632-1985 Ventilation of laboratories

Underwriters Laboratories (UL)

UL 1262-1990 Laboratory equipment
UL 3101-2-20-1997 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Laboratory Centrifuges First Edition

European Committee for Electrotechnical Standardization（CENELEC）

HD 249.2-1981 Laboratory Resistors Part 2: Laboratory A.C. Resistors
EN IEC 60477-1:2022 Laboratory resistors - Part 1: Laboratory DC resistors

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 1876-2019 Networked Smart Learning Objects for Online Laboratories

International Electrotechnical Commission (IEC)

IEC 60477:1974/AMD1:1997 Amendment 1 - Laboratory resistors. Laboratory d.c. resistors
IEC 60477-2:2022 Laboratory resistors - Part 2: Laboratory AC resistors
IEC 60477-1:2022 Laboratory resistors - Part 1: Laboratory DC resistors

Japanese Industrial Standards Committee (JISC)

JIS K 6954:2008 Plastics -- Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test