bio aggregate post

bio aggregate post, Total:209 items.

The international standard classification for "bio aggregate post" includes: Plastics in general , Rubber , Fertilizers , Rubber and plastics products in general , Films and sheets , Dental materials , Raw materials for rubber and plastics , Animal and vegetable fats and oils , Implants for surgery, prosthetics and orthotics .

The Chinese standard classification for "bio aggregate post" includes: Basic standards and general methods for synthetic resin and plastic , Basic standard and general method for synthetic rubber , Daily use plastic products , Stomatologic device, equipment and material , Synthetic resin and plastic , Grease and oil processing and products , Orthopedic devices .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39715.3-2021 Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content

Group Standards of the People's Republic of China

T/CPFIA 0012-2024 Compound microbial fertilizer containing polyglutamic acid
T/TYZSH 008-2023 Windproof and breathable bio-based polyurethane compound fabrics
T/QGCML 2233-2023 Combined polyethylene tank fixed bed biofilm domestic sewage complete set of treatment equipment
T/HEBQIA 025-2021 vegetable polymer fuel oil
T/PLQ 0003-2018 polymer modified bitumen
T/CAI 002-2018 Biostimulant—Chitin/Chitosan Oligosaccharides
T/CECS 10192-2022 Polymer micro-cement
T/CADBM 77-2024 Polymer modified decorative cement
T/SHMHZQ 019-2022 Technical specification for underwater pelletizing system for biodegradable polymers

未注明发布机构

DIN EN ISO 20795-2 E:2012-10 Dental Raw Polymers Part 2: Dental Raw Polymers (Draft)
DIN EN ISO 20836 E:2020-02 Polymerase chain reaction for detection of microorganisms in food chain microbiology (draft)
DIN EN ISO 20795-1 E:2012-10 Dental raw material polymers Part 1: Denture raw material polymers (draft)

Professional Standard - Petrochemical Industry

SH/T 1764.1-2008 Rubber-Analysis by pyrolytic gas-chromatographic methods-Part 1:Identification of polymers(single polymers and polymer blends)

Professional Standard - Agriculture

NY/T 2066-2011 Differentiation for strain of microbial fertilizer production by PCR method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33798-2017 Bio-polyester drum-linkage bags
GB/T 33897-2017 Biopolyester―Polyhydroxyalkanoates(PHA) blowing film

Professional Standard - Energy

NB/T 11250-2023 Characterization of degree of polymerization in lignocellulosic feedstocks

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1422-2016 Polymers for the production of graphene three-dimensional structure powder materials

Professional Standard - Chemical Industry

HG/T 5517～5518-2019 Polymer coated urea and polymer sulfur coated urea (2019)

Professional Standard - Medicine

YY 0270.1-2011/ISO 20795-1:2008 Dentistry--Base polymers--Paet 1:Denture base polymers
YY/T 0270.2-2011 Dentistry—Base polymers—Part 2:Orthodontic base polymers
YY 0270.1-2011 Dentistry-Base polymers-Part 1:Denture base polymers

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22480-2008 Animal and vegetable fats and oils—Determination of polyethylene-type polymers
GB/T 30293-2013 Polyhydroxyalkanoates (PHA) by biomanufacturing
GB/T 31062-2014 Polymeric polyols
GB/T 43953-2024 Biodegradable poly(glycolic acid)（PGA）

国家食品药品监督管理局

YY/T 0661-2017 Standard specification for semi-Crystalline poly ( lactide) polymer and copolymer resin for surgical implants

工业和信息化部

HG/T 5517-2019 Polymer coated urea

Taiwan Provincial Standard of the People's Republic of China

CNS 14184-1998 Polymer-modified paving asphalt

Korean Agency for Technology and Standards (KATS)

KS M 3812-2007 WATERPROOFING SHEETS OF RECYCLED SYNTHETIC POLYMER
KS M 3826-1993 Determination of Chlorine in Chlorine-containing Polymers,Copolymers and their Compounds
KS M ISO 7270-1-2007(2017) Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 1：Identification of polymers(single polymers and polymer blends)
KS P ISO 20795-2:2011 Dentistry－Base polymers－Part 2：Orthodontic base polymers
KS M ISO 7270-1-2007(2022) Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 1：Identification of polymers(single polymers and polymer blends)
KS F 4911-2017 Waterproofing sheets of synthetic polymer
KS P ISO 20795-1:2020 Dentistry — Base polymers — Part 1: Denture base polymers
KS F 4911-2023 Waterproofing sheets of synthetic polymer
KS F 4911-1984 Waterproofing sheets of synthetic polymer
KS P ISO 20795-2-2011(2016) Dentistry－Base polymers－Part 2：Orthodontic base polymers
KS M ISO 7270-1:2007 Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 1：Identification of polymers(single polymers and polymer blends)
KS P ISO 20795-1:2010 Dentistry-Base polymers-Part 1:Denture base polymers
KS P ISO 20795-2:2021 Dentistry — Base polymers — Part 2: Orthodontic base polymers
KS P ISO 20795-1:2014 Dentistry－Base polymers－Part 1：Denture base polymers
KS P 5304-2003 Dentistry－Synthetic polymer teeth
KS P 5304-1986 Dentistry－Synthetic polymer teeth
KS H ISO 6656:2008 Animal and vegetable fats and oils-Determination of polyethylene-type polymers
KS H ISO 6656-2023 Animal and vegetable fats and oils－Determination of polyethylene-type polymers
KS M 3524-2007 Reclaimed polyurethane floor covering
KS M 2619-2021 Biodiesel blend

British Standards Institution (BSI)

BS ISO 16620-3:2015 Plastics. Biobased content. Determination of biobased synthetic polymer content
BS ISO 16620-5:2017 Plastics. Biobased content. Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
BS EN ISO 20795-2:2013 Dentistry. Base polymers. Orthodontic base polymers
BS ISO 7270-1:2020 Rubber. Analysis by pyrolytic gas-chromatographic methods - Identification of polymers (single polymers and polymer blends)
BS EN ISO 20795-1:2008 Dentistry - Base polymers - Denture base polymers
BS ISO 7270-1:2003+A1:2010 Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
BS EN ISO 20795-1:2013 Dentistry. Base polymers. Denture base polymers
PD CEN ISO/TS 13136:2012 Microbiology of food and animal feed. Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens. Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, ...
BS EN 17228:2019 Plastics. Bio-based polymers, plastics, and plastics products. Terminology, characteristics and communication
BS EN ISO 20795-2:2010 Dentistry - Base polymers - Orthodontic base polymers
BS EN ISO 20836:2021 Microbiology of the food chain. Polymerase chain reaction (PCR) for the detection of microorganisms. Thermal performance testing of thermal cyclers
BS EN ISO 10993-13:1999 Biological evaluation of medical devices - Identification and quantification of degradation products from polymeric medical devices
BS EN ISO 10993-13:2010 Biological evaluation of medical devices. Part 13: Identification and quantification of degradation products from polymeric medical devices

GSO

GSO ISO 2028:2015 Synthetic rubber latex -- Preparation of dry polymer
GSO ISO 16620-3:2015 Plastics -- Biobased content -- Part 3: Determination of biobased synthetic polymer content
BH GSO ISO 16620-3:2017 Plastics -- Biobased content -- Part 3: Determination of biobased synthetic polymer content
BH GSO ISO 16620-5:2022 Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
GSO ISO 16620-5:2021 Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
OS GSO ISO 7270-1:2015 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 1: Identification of polymers (single polymers and polymer blends)
BH GSO ISO 20795-1:2017 Dentistry -- Base polymers -- Part 1: Denture base polymers
OS GSO ISO 20795-2:2015 Dentistry -- Base polymers -- Part 2: Orthodontic base polymers
GSO ISO 6656:2015 Animal and vegetable fats and oils -- Determination of polyethylene-type polymers
OS GSO ISO 6656:2015 Animal and vegetable fats and oils -- Determination of polyethylene-type polymers

GOST

GOST R ISO 16620-5-2022 Plastics. Biobased content. Part 5. Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
GOST R ISO 16620-3-2022 Plastics. Biobased content. Part 3. Determination of biobased synthetic polymer content

SCC

AENOR UNE-CEN/TR 15932 IN:2010 Plastics - Recommendation for terminology and characterization of biopolymers and bioplastics
SN-CEN/TR 15932:2010 Plastics — Recommendation for terminology and characterisation of biopolymers and bioplastics
DANSK DS/CEN/TR 15932:2010 Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics
BS ISO 7270-1:2003 Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
SN-CEN/TS 16398:2012 Plastics — Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics — Data sheet
DANSK DS/CEN/TS 16398:2012 Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet
AENOR UNE-CEN/TS 16398 EX:2014 Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet
AWWA ACE69104 Microbial-Sensing Ultrafiltration Membranes Functionalized with Temperature-Sensitive Polymer Brushes
BS PD CEN/TS 16398:2012 Plastics. Template for reporting and communication of biobased carbon content and recovery options of biopolymers and bioplastics. Data sheet
DANSK DS/EN 17228:2019 Plastics – Bio-based polymers, plastics, and plastics products – Terminology, characteristics and communication
NS-EN 17228:2019 Plastics — Bio-based polymers, plastics, and plastics products — Terminology, characteristics and communication
DANSK DS/EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
DANSK DS/EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
DIN EN 17228 E:2018 Draft Document - Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication; German and English version prEN 17228:2018
DANSK DS/ISO 13781:2017 Implants for surgery – Homopolymers, copolymers and blends on poly(lactide) – In vitro degradation testing
SN-CWA 17897-2:2023 Extraction, production and purification of added value products from urban wastes - Part 2: Extraction and purification of PHA biopolymers
BS EN ISO 10993-13:2009 Biological evaluation of medical devices-Identification and quantification of degradation products from polymeric medical devices
ADA 139-2012 Dental Base Polymers
ADA 12-1999(R2008) Denture Base Polymers
HOLDEN HN 1447-2001 Methylpentene Polymer
HOLDEN HN 1415-2012 Polyamide 12 Compounds
HOLDEN HN 2147-2002 Polymer Coating Powder
HOLDEN HN 1415-2001 Polyamide 12 Compounds

Danish Standards Foundation

DS/CEN/TR 15932:2010 Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics
DS/CEN/TS 16398:2013 Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet
DS/EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
DS/EN ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
DS/ISO 7270:1988 Rubber. Identification of polymers (single polymers and blends). Pyrolytic gas chromatographic method

AENOR

UNE-CEN/TR 15932:2010 IN Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics
UNE-CEN/TS 16398:2014 EX Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet

International Organization for Standardization (ISO)

ISO 16620-3:2015 Plastics - Biobased content - Part 3: Determination of biobased synthetic polymer content
ISO 16620-5:2017 Plastics - Biobased content - Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
ISO 20836:2021 Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection of microorganisms — Thermal performance testing of thermal cyclers
ISO 20795-2:2013 Dentistry - Base polymers - Part 2: Orthodontic base polymers
ISO 7270:1987 Rubber; Identification of polymers (single polymers and blends); Pyrolytic gas chromatographic method
ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers
ISO 7270-1:2020 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)
ISO/DIS 22174 Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection and quantification of microorganisms — General requirements and definitions
ISO/FDIS 22174:2024 Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection and quantification of microorganisms — General requirements and definitions
ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
ISO 7270-1:2003 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends)
ISO 20795-2:2010 Dentistry — Base polymers — Part 2: Orthodontic base polymers
ISO 5475:1978 Rubber — Identification of polymers — Pyrolytic/gas chromatographic method — Single polymers
ISO 7270-1:2003/Amd 1:2010 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends); Amendment 1

German Institute for Standardization

DIN EN ISO 22174:2022-11 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection and quantification of microorganisms - General requirements and definitions (ISO/DIS 22174:2022); German and English version prEN ISO 22174:2022 / Note: Date of issue 20...
DIN EN ISO 20838:2006-08 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Requirements for amplification and detection for qualitative methods (ISO 20838:2006); German version EN ISO 20838:2006 / Note:...
DIN EN ISO 20837:2006-08 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Requirements for sample preparation for qualitative detection (ISO 20837:2006); German version EN ISO 20837:2006 / Note: To be ...
DIN CEN ISO/TS 13136:2013-04*DIN SPEC 10794:2013-04 Microbiology of food and animal feed - Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens - Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157...
DIN EN ISO 22119:2011-11 Microbiology of food and animal feeding stuffs - Real-time polymerase chain reaction (PCR) for the detection of food-borne pathogens - General requirements and definitions (ISO 22119:2011); German version EN ISO 22119:2011 / Note: To be replaced by DIN...
DIN EN 17228:2018 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication; German and English version prEN 17228:2018
DIN EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
DIN EN ISO 20795-1:2009 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2008); English version of DIN EN ISO 20795-1:2009-02
DIN EN ISO 20795-1:2013-06 Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013); German version EN ISO 20795-1:2013
DIN EN ISO 20795-2:2013-06 Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013); German version EN ISO 20795-2:2013
DIN EN 17228:2019-06 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication; German version EN 17228:2019
DIN EN ISO 20836:2022-05 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021); German version EN ISO 20836:2021
DIN CEN/TS 16398:2013 Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet; German version CEN/TS 16398:2012

European Committee for Standardization (CEN)

PD CEN/TR 15932:2010 Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics
PD CEN/TS 16398:2012 Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet
EN ISO 20836:2021 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021)
EN ISO 20795-1:2013 Dentistry - Base polymers - Part 1: Denture base polymers
EN ISO 20795-2:2010 Dentistry - Base polymers - Part 2: Orthodontic base polymers
EN ISO 20795-1:2008 Dentistry - Base polymers - Part 1: Denture base polymers
PD CEN/TR 15351:2006 Plastics - Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items
EN ISO 22118:2011 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens - Performance characteristics
EN ISO 10993-13:2010 Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:2010)
CWA 17897-2:2023 Extraction, production and purification of added value products from urban wastes - Part 2: Extraction and purification of PHA biopolymers

American Society for Testing and Materials (ASTM)

ASTM E1428-15a Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species (A Pink Stain Organism)
ASTM E1428-99(2009) Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium reticulum (A Pink Stain Organism)
ASTM E1428-15 Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species (A Pink Stain Organism)
ASTM E1428-99(2004) Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium reticulum (A Pink Stain Organism)
ASTM E1428-99 Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium Reticulum (A Pink Stain Organism)
ASTM D5260-04 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-22 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D5260-97 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM F1251-89(2003) Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices
ASTM D5260-16 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM F1251-89(1995) Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices
ASTM D5260-04(2010) Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM F794-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM D1784-99ae1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

Lithuanian Standards Office

LST 1364-1994 Microbiological deterioration of polymeric materials. Terms and definitions

TH-TISI

TIS 2559-2011 Polyethylene compound for drinking water pipe production

GOSTR

GOST 34281-2017 Oxo-biodegradable packaging. Method for the assessment of oxo-biodegradation of polymer films
GOST 33349-2015 Polymer composites. Production of plates by winding for preparation of test specimens
GOST R 57868-2017 Polymer composites. Identification of polymer layers and inclusions by infrared microscopy
GOST R 57859-2017 Polymer composites. Test method for determining resistance of synthetic polymeric materials to fungi

GM North America

GM 9985574-1994 Adhesive, Urethane, Polymer
GM 9985573-1994 Adhesive, Urethane, Polymer
GM 9985042-1994 Adhesive - ABS Polymer
GM GMP.POM.010-1994 Acetal - Homopolymer, Alloy

BELST

STB 1072-97 Polymer-mineral compounds. Specifications

RU-GOST R

GOST 33371-2015 Polymer composites. Production of plates by pultrusion moulding for preparation of test specimens
GOST 12302-2013 Packs made of polymeric films and composite materials. General specifications
GOST 33372-2015 Polymer composites. Production of reinforced thermoplastic plates by moulding for preparation of test specimens
GOST 33742-2016 Polymer composites. Classification
GOST 28614-1990 Rubber. Identification of polymers (single polymers and blends) by pyrolytic gas chromatographic method
GOST R 50579-1993 Polymer composites. Classification

KR-KS

KS M ISO 7270-1-2023 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)
KS P ISO 20795-1-2020 Dentistry — Base polymers — Part 1: Denture base polymers
KS P ISO 20795-2-2021 Dentistry — Base polymers — Part 2: Orthodontic base polymers

Japanese Industrial Standards Committee (JISC)

JIS T 6506:1998 Synthetic polymer teeth
JIS T 6506:2005 Synthetic polymer teeth
JIS K 6231:1998 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method
JIS K 7229:1995 Determination of chlorine in chlorine-containing polymers, copolymers and their compounds
JIS A 6008:2022 Roofing sheets of synthetic polymer
JIS K 6231:2004 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method

(U.S.) Ford Automotive Standards

FORD FLTM BP 108-9-2011 DETERMINATION OF DEPOSITS FROM COOLANT/HOSE/POLYMER INTERACTION

CEN - European Committee for Standardization

EN 17228:2019 Plastics - Bio-based polymers@ plastics@ and plastics products - Terminology@ characteristics and communication
PREN 17228-2018 Plastics - Bio-based polymers@ plastics@ and plastic products - Terminology@ characteristics and communication
EN ISO 10993-13:2009 Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices

ES-UNE

UNE-EN 17228:2020 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
UNE-EN ISO 20836:2022 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021)

Association Francaise de Normalisation

NF EN 17228:2019 Plastiques - Polymères, plastiques et produits en plastique biosourcés - Terminologie, caractéristiques et communication
NF EN ISO 20795-2:2013 Oral medicine - Base polymers - Part 2: polymers for orthodontic base
NF EN ISO 20795-1:2013 Oral medicine - Basic polymers - Part 1: polymers for denture bases
NF T51-799*NF EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication
NF V03-027*NF EN ISO 20836:2021 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers
NF EN ISO 20836:2021 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermocyclers
NF S91-213:1996 Dentistry. Synthetic polymer teeth.

ES-AENOR

UNE 53-299 Pt.1-1985 Uses of plasticizing compounds for polyvinyl chloride copolymers and homopolymers
UNE 53-299 Pt.2-1985 Determination of the properties of plasticizing compounds of polyvinyl chloride copolymers and homopolymers

US-FCR

FCR UFGS-35 59 13.14 20-2010 POLYMERIC FENDER PILES

United States Navy

NAVY UFGS-35 59 13.14 20-2010 POLYMERIC FENDER PILES
NAVY MIL-P-82658 (1)-1978 POLYMER, LIQUID, POLYBUTADIENE, CARBOXY TERMINATED
NAVY MIL-P-82658-1977 POLYMER, LIQUID, POLYBUTADIENE, CARBOXY TERMINATED

American National Standards Institute （ANSI)

ANSI/ADA 12-2002 Denture Base Polymers
ANSI/ADA 139-2012 Dental Base Polymers

BR-ABNT

ABNT NBR 15723-3-2020 Implants for surgery - Polymeric materials Part 3: Requirements for polyaryletherketone (PAEK) polymers
ABNT NBR 15723-4-2020 Implants for surgery - Polymeric materials Part 4: Requirements for porous polyethylene polymers

American Concrete Institute

ACI SP-137-1993 Polymer Concrete

GM Europe

GME QK 000302-1983 ABS-PVC-Formmasse (Regenerat) ABS-PVC-Compound (Regenerated Material) German

PL-PKN

PN C89102-1973 Polymeres Oefinitions of ?erms

ZA-SANS

SANS 1042:2006 Polymer floor dressings

Others: biodegradable polymer,biopolymer,Identification of Microbial Fertilizer Production Strains by Polymerase Chain Reaction Method,biopolymer,bio aggregate post,What are biopolymers,biopolymer material,Materials using biopolymers,biosynthetic polymer,use of biopolymers,Polymer biobased content,bio-based polymer