intensity volume

intensity volume, Total:100 items.

The international standard classification for "intensity volume" includes: Metallic coatings , Surface treatment , Volumetric equipment and measurements , Particle size analysis. sieving .

The Chinese standard classification for "intensity volume" includes: Material Protection , Oil and gas gathering and transportation equipment .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5270-1985 Metallic coatings on metallic substrates; Electrodeposited and chemically deposited coatings; Review of methods available for testing adhesion
GB/T 5270-2005 Metallic coatings on metallic substrates?Electrodeposited and chemically deposited coatings?Revies of methods available for testing adhesion
GB/T 14853.4-2002 compounding ingredients - Carbon black, pelletized - Determination of mass strength
GB/T 5270-2024 Metallic coatings on metallic substrates—Electrodeposited and chemically deposited coatings—Review of methods available for testing adhesion

Professional Standard - Petroleum

SY/T 6477-2000 The evaluation method of remaining strength of the oil & gas transmission pipeline with the flaw Part 1: The volumetric type flaw

Professional Standard - Forestry

LY/T 1411-1999 Laminated wood plastics - Compreg - Determination of compression strength parallel to face grain
LY/T 1409-1999 Laminated wood plastics - Compreg - Determination of static bending
LY/T 1410-1999 Laminated wood plastics - Compreg - Determination of tension strengh parallel to face grain

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40401-2021 Determination of density by volumetric displacement—Skeleton density by gas pycnometry

未注明发布机构

DIN EN ISO 17828 E:2013-10 Determination of volume density of solid biofuels (draft)

RU-GOST R

GOST 21153.8-1988 Rocks. Method for determination of triaxial compressive strength
GOST R 54191-2010 Solid biofuels. Determination of bulk density
GOST R 54225-2010 Solid recovered fuels. Determination of bulk density
GOST R 54225-2010(2019) Solid recovered fuels. Determination of bulk density

International Organization for Standardization (ISO)

ISO 15100:2000 Plastics - Reinforcement fibres - Chopped strands; Determination of bulk density
ISO 3852:1988 Iron ores; determination of bulk density
ISO 17828:2015 Solid biofuels - Determination of bulk density
ISO 2031:1972 Granulated cork — Bulk density test
ISO 2031:2015 Granulated cork - Determination of apparent bulk density
ISO 2031:1991 Granulated cork; determination of bulk density

ZA-SANS

SANS 6111:1988 Accumulated impact strength of steel shanks
SANS 6110:1988 Accumulated impact strength of ladies' shoe heels of height greater than 25 mm
SANS 5644:1988 Accumulated impact strength of toe-puff materials and the degree of softening of toe-puffs

Standard Association of Australia （SAA）

AS 1012.14:2018 Methods of testing concrete, Method 14: Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume
AS 2879.8:2000 Alumina - Determination of bulk density

AENOR

UNE-EN 15761:2010 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
UNE 56919:1990 GRANULATED CORK. BULK DENSITY TEST.

Danish Standards Foundation

DS/EN 15761:2010 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
DS/EN 1237:1996 Fertilizers - Determination of bulk density (tapped)
DS/CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
DS/EN 15103:2010 Solid biofuels - Determination of bulk density
DS/ISO/TR 16153:2005 Piston-operated volumetric instruments - Determination of uncertainty for volume measurements made using the photometric method
DS/EN 1236:1996 Fertilizers - Determination of bulk density (loose)

Lithuanian Standards Office

LST EN 15761-2010 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
LST EN 15103-2010 Solid biofuels - Determination of bulk density

United States Navy

NAVY MIL-F-24259 A-1987 FLUID FLOWMETER, VOLUME VELOCITY TYPE

American Society for Testing and Materials (ASTM)

ASTM C948-81(2023) Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
ASTM D7084-04(2017) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D7084-18 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D1937-10 Standard Test Method for Carbon Black, Pelleted&8212;Mass Strength
ASTM C914-95(1999) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM D3880/D3880M-90(2009)e1 Standard Test Method for Asbestos Strength Units

GSO

OS GSO ISO/TR 16153:2010 Piston-operated volumetric instruments -- Determination of uncertainty for volume measurements made using the photometric method
GSO ISO 1388-7:2002 Ethanol for industrial use metod of test : determination of methanol content between 0.01 and 0.20 % (v/v ) - photometric method .
GSO ISO/TR 16153:2010 Piston-operated volumetric instruments -- Determination of uncertainty for volume measurements made using the photometric method

SCC

MIL MIL-F-24259A-2019 FLUID FLOWMETER, VOLUME VELOCITY TYPE
NS-EN 15761:2009 Pre-shaped growing media — Determination of length, width, height, volume and bulk density
DANSK DS/EN 15761:2009 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
AENOR UNE-EN 15761:2010 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
HOLDEN HN 0174-1978 Determination of Volume and Density of Elastomers
HOLDEN HN 0174-2013 Determination of Volume and Density of Elastomers
DANSK DS/ISO/TR 16153:2005 Piston-operated volumetric instruments – Determination of uncertainty for volume measurements made using the photometric method
AS 3899:1991 Higher rank coal and coke - Bulk density
06/30145817 DC BS ISO 23499. Coal. Determination of bulk density
BS EN ISO 534:2005 Paper and board. Determination of thickness, density and specific volume
DANSK DS/CEN/TS 15103:2006 Solid biofuels - Methods for the determination of bulk density

GM North America

GM GM4452P-1988 Measuring Tensile Strength of Electrodeposits

German Institute for Standardization

DIN EN 1933:1999 Exterior blinds - Resistance to load due to water accumulation - Test method; German version EN 1933:1998
DIN EN 15761:2010-04 Pre-shaped growing media - Determination of length, width, height, volume and bulk density; German version EN 15761:2009 / Note: To be replaced by DIN EN 15761 (2022-01).
DIN 51705:2001 Testing of solid fuels - Determination of the bulk density of solid fuels
DIN 12803-2:1981 Laboratory glassware; alcoholometry; alcoholometers for the alcoholic strength by volume

RO-ASRO

STAS 5630-1973 COKE Determination of the bulk density

BE-NBN

NBN G 41-006-1989 Cotton bales - Dimensions and density
NBN-ISO 2031:1992 Granulated cork. Determination of bulk density

IN-BIS

IS 4471-1981 Method for determination of strength of naphthol (azo coupling component) (gravimetric and volumetric methods)

Association Francaise de Normalisation

NF EN 15761:2010 Preformed growing media - Determination of length, width, height, volume and bulk density
FD ISO/TR 16153:2023 Determination of measurement uncertainty for volumetric measurements of piston volumetric devices using the photometric method
NF EN 13041:2012 Soil amendments and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total porosity
NF X34-105*NF EN ISO 17828:2016 Solid biofuels - Determination of bulk density
NF U44-314*NF EN 15761:2010 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
NF B57-012*NF ISO 2031:2015 Granulated cork - Determination of apparent bulk density
NF ISO 15100:2001 Plastics - Reinforcement fibers - Cut wires - Determination of apparent density

British Standards Institution (BSI)

PD ISO/TR 16153:2023 Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a photometric method
BS EN 15103:2009 Solid biofuels - Determination of bulk density
BS EN 15103:2010 Solid biofuels. Determination of bulk density
BS EN ISO 17828:2015 Solid biofuels. Determination of bulk density
BS 6147:1989 Methods for determination of bulk density of iron ores
PD ISO/TR 20461:2023 Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a gravimetric method

HU-MSZT

MSZ KGST 1140-1978 Determination of volumetric compression of wood

American Welding Society (AWS)

WRC 478:2003 Stress Intensity And Crack Growth Opening Area Solutions For Through-Wall Cracks In Cylinders And Spheres

KR-KS

KS M ISO 12625-3-2022 Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
KS M ISO 17828-2021 Solid biofuels — Determination of bulk density

Korean Agency for Technology and Standards (KATS)

KS M ISO 3944:2006 Fertilizers-Determination of bulk density(loose)
KS M ISO 12625-3:2022 Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
KS M ISO 17828:2021 Solid biofuels — Determination of bulk density
KS M ISO 3944:2013 Fertilizers－Determination of bulk density(loose)

European Committee for Standardization (CEN)

EN 15103:2009 Solid biofuels - Determination of bulk density
EN 15761:2009 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
PD CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density

Indonesia Standards

SNI 06-0427-1989 Plastic materials, Determination of bulk density

WRC - Welding Research Council

BULLETIN 478-2003 STRESS INTENSITY AND CRACK GROWTH OPENING AREA SOLUTIONS FOR THROUGH-WALL CRACKS IN CYLINDERS AND SPHERES

ESDU - Engineering Sciences Data Unit

ESDU 89037-1989 Orthobaric densities and molar volumes of liquids. Alcohols.
ESDU 89019 A-1990 Orthobaric densities and molar volumes of liquids. Aromatic hydrocarbons.
ESDU 86033-1986 The effect of electrodeposited chromium on the fatigue strength of low alloy steel.
ESDU 98015-1998 Orthobaric densities and molar volumes of liquids. Halogenated benzenes.

Japanese Industrial Standards Committee (JISC)

JIS A 1161:1994 Testing methods for bulk specific gravity, water content, absorption and compressive strength of cellular concrete

PL-PKN

PN H04062-1993 Iron ores. Determination of bulk density
PN D04215-1965 Lignofol and Lignostone. Determi- nation of compressive strength

AT-ON

ONORM S 7021-1983 Testing of leather; determination of bulk density Leather testing; determination of apparent density

GM Europe

GME 60249-2009 Determination of volume and density of elastomers (English/German)