Annual leak rate

Annual leak rate, Total:263 items.

The international standard classification for "Annual leak rate" includes: Mechanical testing , Non-destructive testing , Flanges, couplings and joints , Measurement of electrical and magnetic quantities , Railway engineering in general .

The Chinese standard classification for "Annual leak rate" includes: Nonmetal material testing machine , Basic standards and general methods , Pipeline fittings , Electrical instrument and meter in general , Cable and its accessory .

Professional Standard - Aerospace

QJ 1610-1989 Classification of valve gas leakage rate and its detection

未注明发布机构

Zero Leaks. Limiting Emissions of Refrigerants Zero Leaks

Taiwan Provincial Standard of the People's Republic of China

CNS 13646-1996 Natural Gas Leak Alarm Devices
CNS 14257-1998 Method of test for leakage rate respirator facepiece
CNS 5481-1980 Leakage Test for Conical Joints

Professional Standard - Medicine

YY/T 0866-2024 Test method for total leakage rate of medical protective masks
YY/T 0866-2011 Total inward leakage determination method of protective face mask for medical use

Group Standards of the People's Republic of China

T/QGCML 1575-2023 Anti-leak needle valve
T/CECA 80-2023 Leaky coaxial cables
T/QGCML 1771-2023 Leak-proof self-standing liquid bag
T/CRTAS 0001-2022 Drain cover pad for dangerous goods spillage

Professional Standard - Building Materials

JC/T 2313-2015 Nitrogen leakage test machine for nonmetallic sealing material

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32191-2015 Leakage current tester
GB/T 45182-2025 Test procedures of gasket parameters based on leakage rate for the pipe flange joints
GB/T 12604.7-1995 Terminology for nondestructive testing - Leak testing
GB/T 15823-1995 Examination for helium leak detecting
GB/T 15285-1994 Sectional specification for leaky coaxial cables

National Metrological Verification Regulations of the People's Republic of China

JJG 843-2022 Leakage Current Tester

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 4486-2023 Gasket coefficient (m) and specific pressure (y) test method based on leakage rate

National Metrological Technical Specifications of the People's Republic of China

JJF(建材) 200-2023 Calibration specification for nitrogen leak rate tester for non-metallic sealing materials

Professional Standard - Urban Construction

CJ/T 3057-1996 Household combustible gas leakage alarms

Henan Provincial Standard of the People's Republic of China

DB41/T 1933-2019 Ammonia Leakage Emergency Disposal Specifications

Anhui Provincial Standard of the People's Republic of China

DB34/T 1548-2011 Guidelines for Disposal of Compressed Natural Gas Leak

Professional Standard - Railway

TB/T 3201-2008 The leaky coaxial cables for railway communication

Gosstandart of Russia

GOST 9544-1993 Pipeline gate valves-rates of gates sealibility
GOST 9544-2015 Pipeline valves. Leakage rates of valves
GOST 9544-1975 Pipeline stop valves. Standards for disc tightness
GOST R 54808-2011 Pipeline valves. Leakage rates of valves
GOST 19656.16-1986 Semiconductor microwave limiter diodes. Measurement method of break-down and leakage powers

Society of Automotive Engineers (SAE)

SAE MAP4053 Uniform Measurement Units for Leakage Rates
SAE ARP1405 Uniform Measurement Units for Leakage Rates
SAE ARP1405-1992 Uniform Measurement Units for Leakage Rates
SAE MAP4053-2007 UNIFORM MEASUREMENT UNITS FOR LEAKAGE RATES
SAE ARP1405-1976 UNIFORM MEASUREMENT UNITS FOR LEAKAGE RATES
SAE MAP4053A-2016 Uniform Measurement Units for Leakage Rates
SAE MAP4053A Uniform Measurement Units for Leakage Rates
SAE J1267_197905 Leakage Testing
SAE J1267_198812 Leakage Testing
SAE J1267_201801 Leakage Testing
SAE J1267_198406 Leakage Testing
SAE J1336-1987 Hydraulic Cylinder Leakage Test, Recommended Practice June 1987
SAE J1336-2014 Hydraulic Cylinder Leakage Test
SAE J1336_201409 Hydraulic Cylinder Leakage Test
SAE J1336_202110 Hydraulic Cylinder Leakage Test
SAE J1336_198706 Hydraulic Cylinder Leakage Test
SAE J1336-2021 Hydraulic Cylinder Leakage Test@ Recommended Practice
SAE J1267-2018 Leakage Testing
SAE J1176_197704 External Leakage Classifications for Hydraulic Systems
SAE J1267-1984 Leakage Testing@ Information Report;
SAE J1176_201206 External Leakage Classifications for Hydraulic Systems
SAE J2679_201004 Charge Air Cooler Leakage
SAE J1267-1988 Leakage Testing, Information Report;
SAE J2679_200411 Charge Air Cooler Leakage
SAE J2679-2010 Charge Air Cooler Leakage
SAE MAP4053-1989 UNIFORM MEASUREMENT UNITS FOR LEAKAGE RATES
SAE J1267-1979 Leakage Testing
SAE J2297-1996 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a Air- Conditioning Systems, Standard September 1996
SAE J2679-2004 Charge Air Cooler Leakage
SAE J1176_198603 External Leakage Classifications for Hydraulic Systems
SAE AMS3159C-1967 LEAK TEST SOLUTION Liquid Oxygen Compatible
SAE AMS3159D-2011 LEAK TEST SOLUTION Liquid Oxygen Compatible
SAE J2727_200506 R134a Mobile Air Conditioning System Leakage Chart

American Society for Testing and Materials (ASTM)

ASTM F586-79(1989)e1 Standard Test Method for Leak Rates Versus y Stresses and m Factors for Gaskets
ASTM E1599-94 Standard Guide for Corrective Action for Petroleum Releases (Withdrawn 2002)
ASTM D6747-15 Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes
ASTM D7909-21 Standard Guide for Placement of (Blind) Actual Leaks During Electrical Leak Location Surveys of Geomembranes
ASTM D790-07e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D7909-21a Standard Guide for Placement of Intentional Leaks During Electrical Leak Location Surveys of Geomembranes
ASTM E2024-99 Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
ASTM E2024-05 Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
ASTM D6747-21 Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes
ASTM STP 1161-1993 Underground Storage Tank Leak Detection
ASTM D7909-21a(2025) Standard Guide for Placement of Intentional Leaks During Electrical Leak Location Surveys of Geomembranes
ASTM E2357-23 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
ASTM E779-99 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
ASTM E779-10 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
ASTM E779-03 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
ASTM E2357-24 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
ASTM F816-83(2003) Standard Test Method for Combined Fine and Gross Leaks for Large Hybrid Microcircuit Packages
ASTM RR-F03-1003 1974 F0586-Standard Test Method For Leak Rates Versus Y Stresses And M Factors For Gaskets
ASTM F816-83(1998)e1 Standard Test Method for Combined Fine and Gross Leaks for Large Hybrid Microcircuit Packages
ASTM E479-91(2006) Standard Guide for Preparation of a Leak Testing Specification
ASTM E425-90a Terminology Related to Leak Testing

German Institute for Standardization

DIN EN 13274-1:2001 Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage; German version EN 13274-1:2001
DIN EN ISO 20486:2018-05 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017); German version EN ISO 20486:2018
DIN 25436:1980 Integral leakage rate test of containment with the absolute pressure method
DIN EN ISO 20486 E:2016-10 Calibration of gas reference leaks for non-destructive testing leak detection (draft)
DIN EN 61534-22:2015 Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation (IEC 61534-22:2014); German version EN 61534-22:2014
DIN EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
DIN EN 61534-22:2009 Powertrack systems - Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation (IEC 61534-22:2009); German version EN 61534-22:2009
DIN EN 13160-7:2016-12 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets; German version EN 13160-7:2016 / Note: Applies in conjunction with DIN EN 13160-2 (2016-12), DIN EN 13...
DIN EN 13625:2002-03 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001
DIN EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors; German version EN 1518:1998
DIN EN ISO 20486 E:2016 Draft Document - Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO/DIS 20486:2016); German and English version prEN ISO 20486:2016
DIN EN 13192 Berichtigung:2004 Non-destructive testing – leak testing – calibrating reference leaks for gases; German version EN 13192:2001
DIN EN 13160-7 E:2014 Draft Document - Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets; German version prEN 13160-7:2014
DIN EN 13192:2002 Non-destructive testing - Leak test - Calibration of gaseous reference leaks; German version EN 13192:2001
DIN EN 13274-1:2001-04 Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage; German version EN 13274-1:2001
DIN EN 1518:2019 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors

Association Francaise de Normalisation

NF S76-007-1*NF EN 13274-1:2001 Respiratory protective devices - Methods of test - Part 1 : determination of inward leakage and total inward leakage
NF EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference gas leaks
NF A09-461*NF EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
NF M62-211:1984 Limiting enclosures. Method of control of the leak rate per hour. Enclosures of class 3.
NF A09-461:2002 Non-destructive testing - Leak test - Calibration of gaseous reference leaks.
NF M62-212:1984 Enceintes de confinement - Méthode de contrôle du taux de fuite horaire - Enceintes de classe 4.
NF A09-462*NF EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage.
NF A09-107:1979 Testing for leak tightness by means of ammonia. Locating of leaks by the suction cup method.
NF EN 13160-7+A1:2024 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
NF EN 13160-5:2005 Leak detection systems - Part 5 : tank gauge leak detection systems
NF EN 13160-7:2003 Leak detection systems - Part 7 : general requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
NF A09-106:1979 Testing for leak tightness by means of ammonia. Locating of leaks by overall pressurization.
NF E86-601-7*NF EN 13160-7:2017 Leak detection systems - Part 7 : requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
NF EN 13625:2002 Non-destructive testing - Leak testing - Guide for the selection of instruments used for measuring gas leaks
NF EN 13274-1:2001 Respiratory protective devices - Test methods - Part 1: determination of inward leakage and total inward leakage
NF A09-020*NF EN ISO 20484:2017 Non-destructive testing - Leak testing - Vocabulary

Ente Nazionale Italiano di Unificazione

UNI 7418:1975 Nuclear installations. Leakage rate tests for containement systems.
UNI EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
UNI EN 13160-7:2024 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
UNI EN 13160-5:2005 Leak detection systems - Part 5: Tank gauge leak detection systems
EC 1-2008 UNI EN 13160-5:2005 Leak detection systems - Part 5: Tank gauge leak detection systems
UNI EN 1518:2000 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
EC 1-2024 UNI EN 13160-7:2016 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets

European Committee for Standardization (CEN)

EN 13274-1:2001 Respiratory protective devices - Methods of test - Part 1: Determination of inward leckage and total inward leckage
EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors

Korean Agency for Technology and Standards (KATS)

KS P 1104-2006 Leakage rate testing method for facepieces of respirstors
KS P 1104-2021 Leakage rate testing method for facepieces of respirstors
KS P 1104-2006(2021) Leakage rate testing method for facepieces of respirstors
KS P 1104-2006(2016) Leakage rate testing method for facepieces of respirstors
KS B ISO 20486-2023 Non-destructive testing — Leak testing — Calibration of reference leaks for gases
KS R 1168-2019 Test method of refrigerant leakage rates from mobile air conditioning system
KS A ISO 2855-2024 Radioactive materials ― Packagings ― Tests for contents leakage and radiation leakage
KS A ISO 2855-2019 Radioactive materials－Packagings－Tests for contents leakage and radiation leakage
KS R 1168-2009(2019) Test method of refrigerant leakage rates from mobile air conditioning system

US-FCR

FCR FED H-08-4 VOL 3 SEC II 610.8-1988 DUCT LEAKAGE CLASSIFICATION AND ALLOWABLE LEAKAGE
FCR UFGS-33 58 00-2008 LEAK DETECTION FOR FUELING SYSTEMS

Japanese Industrial Standards Committee (JISC)

JIS T 8159:1995 Leakage rate testing method for facepieces of respirators
JIS T 8159:2006 Leakage rate testing method for respiratory protective devices
JIS Z 2331:1992 Method for helium leak testing
JIS Z 2331:2006 Method for helium leak testing

Underwriters Laboratories (UL)

UL 555S-1993 Leakage rated dampers for use in smoke control systems
UL 101-2019 UL Standard for Safety Leakage Current for Appliances
UL 101-2002 UL Standard for Safety Leakage Current for Appliances Fifth Edition; Reprint with revisions through and including February 1, 2007 [Replaced: UL C101]
UL 101 BULLETIN-2019 UL Standard for Safety Current Leakage for Appliances (COMMENTS DUE: April 18@ 2019)
UL 101 BULLETIN-2017 UL Standard for Safety Current Leakage for Appliances (COMMENTS DUE: June 26@ 2017)
UL 101 BULLETIN-2018 UL Standard for Safety Current Leakage for Appliances (COMMENTS DUE: September 10@ 2018)
UL 101 BULLETIN-2016 UL Standard for Safety Current Leakage for Appliances (COMMENTS DUE: September 28@ 2016)

American Petroleum Institute (API)

API PUBL 4479-1989 Proceedings 1989 Oil Spill Conference Prevention@ Behavior@ Control@ Cleanup
API DR184-1980 Laboratory Scale Gasoline Spill and Venting Experiment (Reprinted in 1993)
API RP 1175-2015 Pipeline Leak Detection - Program Management (FIRST EDITION; ERTA: March 2017)
API PUBL 346-1998 Results of Range-Finding Testing of Leak Detection and Leak Location Technologies for Underground Pipelines
API PUBL 45751-1993 Proceedings of the 1991 Oil Spill Conference Infobase – Tutorial and Reference Guide
API PUBL 45752-1993 Proceedings of the 1991 Oil Spill Conference Infobase Tutorial and Reference Guide

American Water Works Association (AWWA)

AWWA ACE71054 Leak Detection
AWWA INF53973 GIS-Based Analysis of Leak Frequency on Watermains
AWWA ACE65198 An Innovative Approach to Improve Active Leak Detection Success
AWWA ACE90000 Leak Detection and Repair
AWWA ACE68662 Washington's Water Use Efficiency Rule: Meters, 10% Leakage Standard, and Much More
AWWA ACE99489 A Proactive Approach to Leakage Reduction
AWWA ACE70688 Trunk Main Acoustic Leak Detection

Swedish Institute for Standards

SS-EN 13192:2001 Non destructive testing - Leak testing - Calibration reference leaks for gases
SS-EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
SS-EN 13160-7:2016+A1:2024 Leak detection systems — Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
SS-EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
SS-EN 13160-5:2004 Leak detection systems - Part 5: Tank gauge leak detection systems
SS-EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
SS-EN 13274-1:2001 Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage

Spanish Association for Standardization (UNE)

AENOR UNE-EN ISO 20486:2018 Non destructive essays. Leak detection. Reference leak calibration for gases. (ISO 20486:2017).
UNE-EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
UNE-EN 13192:2002 Non destructive testing. Leak testing. Calibration of reference leaks for gases.
AENOR UNE-EN 13192:2002 Non destructive essays. Leak detection. Calibration of reference gas leaks.
UNE-EN 13160-5:2005 Leak detection systems - Part 5: Tank gauge leak detection systems
UNE-EN 13160-7:2003 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
UNE-EN 13160-7:2017 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
UNE-EN 13274-1:2001 Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage.
AENOR UNE-EN 13274-1:2001 Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage.
AENOR UNE-EN ISO 20484:2017 Non destructive essays. Leak test. Vocabulary. (ISO 20484:2017).
AENOR UNE-EN 1518:1999 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors

British Standards Institution (BSI)

BS EN ISO 20486:2018 Non-destructive testing. Leak testing. Calibration of reference leaks for gases
BS EN 13160-7:2016+A1:2024 Leak detection systems - Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
BS EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
BS EN 1518:1998(2008) Nondestructive Testing Leak Testing Mass Spectrometry Leak Detector Characterization
BS EN 13274-1:2001 Respiratory protective devices - Methods of test - Determination of inward leakage and total inward leakage
BS EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
24/30498660 DC BS EN 1518 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
BS EN 13625:2002(2007) Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
BS EN 13160-7:2003 Leak detection systems - General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
BS EN 13192:2002(2007) Non-destructive testing - Leak testing - Calibration of reference leaks for gases
BS EN 13192:2002 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
11/30238497 DC BS EN 13160-5. Leak detection systems. Part 5. Tank gauge leak detection systems
25/30507929 DC BS EN IEC 63466-2 Leaky waveguides - Part 2: Sectional specification for elliptical leaky waveguides

ANS - American Nuclear Society

N45.4-1972 Leakage-rate testing of containment structures for nuclear reactors
56.8-2002 Containment System Leakage Testing Requirements
56.8-1987 CONTAINMENT SYSTEM LEAKAGE TESTING REQUIREMENTS

CEN - European Committee for Standardization

EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases

Canadian Standards Association (CSA)

CSA N287.6-94-1994 Pre-Operational Proof and Leakage Rate Testing Requirements for Concrete Containment Structures for CANDU Nuclear Power Plants General Instruction No 1
CSA N287.6-2011(R2021) Pre-operational proof and leakage rate testing requirements for concrete containment structures for nuclear power plants, Includes Update No. 1 (2019)

Danish Standards Foundation

DANSK DS/EN 13192:2001 Non destructive testing – Leak testing – Calibration of reference leaks for gases
DS/EN 13192:2002 Non destructive testing - Leak testing - Calibration of reference leaks for gases
DANSK DS/EN ISO 20486:2018 Non-destructive testing – Leak testing – Calibration of reference leaks for gases (ISO 20486:2017)
DANSK DS/EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
DS/EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
DANSK DS/EN 13160-7+A1:2024 Leak detection systems – Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
DS/EN 13160-5/AC:2007 Leak detection systems - Part 5: Tank gauge leak detection systems
DS/EN 13160-5:2004 Leak detection systems - Part 5: Tank gauge leak detection systems
DS/EN 13160-7:2003 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
DANSK DS/EN 13160-7:2016 Leak detection systems – Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
DANSK DS/EN 13274-1:2001 Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage
DS/EN 1518:1999 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors

Magyar Szabványügyi Testület

MNOSZ 11317-1952 leakage under pavement
MSZ 11413/1-1977 Leak detection and general rules

International Organization for Standardization (ISO)

ISO 20486:2017 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
ISO/TR 10220:1989 Batteries for watches; leakage tests

Standards Norway

NS-EN 13192:2001 Non destructive testing — Leak testing — Calibration of reference leaks for gases
NS-EN ISO 20486:2018 Non-destructive testing — Leak testing — Calibration of reference leaks for gases (ISO 20486:2017)
NS-EN 13625:2001 Non-destructive testing — Leak test — Guide to the selection of instrumentation for the measurement of gas leakage
NS-EN 13160-5:2004 Leak detection systems — Part 5: Tank gauge leak detection systems
NS-EN 13160-7:2016 Leak detection systems — Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE CH-99-14-2-1999 Distribution System Leakage Impacts on Apartment Building Ventilation Rates
ASHRAE 3858-1995 Duct Leakage Measurement and Analysis

Fluid Controls Institute

FCI 70-3-2015 Regulator Seat Leakage
FCI 70-3-2004 Regulator Seat Leakage
FCI 70-2-2003 Control Valve Seat Leakage
FCI 70-3-2016 Regulator Seat Leakage
FCI 70-2-2021 Control Valve Seat Leakage
FCI 70-2-2006 Control Valve Seat Leakage
FCI 70-2-2013 Control Valve Seat Leakage
FCI 91-2-2018 Standard for Solenoid Valve Seat Leakage
FCI 91-2-2001 Standard for Solenoid Valve Seat Leakage

American National Standards Institute （ANSI)

ANSI/FCI 70-2-2021 Control Valve Seat Leakage
ANSI/FCI 70-3-2004 Regulator Seat Leakage
ANSI/FCI 70-2-2013 Control Valve Seat Leakage
ANSI/EIA/TIA 455-100A:1989 Gas Leakage Test for Fiber Optic Cable
ANSI/TIA/EIA 455-100A-1989 Gas Leakage Test for Fiber Optic Cable
ANSI/TIA-455-100A-1989 Gas Leakage Test for Fiber Optic Cable

Lithuanian Standards Office

LST EN 13192-2002 Non destructive testing - Leak testing - Calibration of reference leaks for gases
LST EN 13192-2002/AC-2004 Non destructive testing - Leak testing - Calibration of reference leaks for gases
LST EN 13625-2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
LST EN 13160-5-2005/AC-2007 Leak detection systems - Part 5: Tank gauge leak detection systems
LST EN 13160-7-2004 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
LST EN 13160-5-2005 Leak detection systems - Part 5: Tank gauge leak detection systems
LST EN 1518-2001 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors

BE-NBN

NBN 819 ADD 3-1984 Ground leakage circuit breaker

SCC

FM Approvals 7745:2021 Liquid Leak Detectors
SPC GB/T 15335-2019 Determination of leakage rate and specific resistance for air duct (TEXT OF DOCUMENT IS IN CHINESE)

American Society of Mechanical Engineers (ASME)

ASME SEC V A-10-2003 Article 10 Leak Testing

International Federation of Trucks and Engines

NAVISTAR TMS 9525-2009 Vent Window Leakage Test
NAVISTAR TMS 9545-2013 Cab Leakage - Testing Requirements

American Welding Society (AWS)

WRC 431:1998 Part 1: Summary of Gasket Steam Leakage Tests: Gasket Steam Leakage Tests; Part 2: Summary of Gasket Steam Leakage Tests: Leak Tests Conducted on Graphite Gaskets; Part 3: Summary of Gasket Steam Leakage Tests: Long Duration Air and Steam Screening T...

GM Europe

GME 7557-2007 Compression nut leak test
GME7557-2007 Dichtheitspr眉fung an Einpressmuttern Leak Test on Press Nuts English/German; This specification may be applied only for current projects incl. Global Epsilon e (37
GME OPEL 600-1983 Determination of Amount of Air Leakage (German)

GB-REG

REG NASA-LLIS-0251-1993 Lessons Learned - Liquid Oxygen Spills
REG NASA-LLIS-0082-1992 Lessons Learned - Dynatube Leak Checks
REG NASA-LLIS-0257-1994 Lessons Learned - JP-4 Fuel Leak

CZ-CSN

CSN 66 8047-1974 Te-(< iif the hli'cil from CiiNridiieil indu-trial iw^losKcs

YU-JUS

JUS M.E7.110-1991 Refrigerating plants. Leakage test

IN-BIS

IS 9902-1982 Recommended practices for leak testing

WRC - Welding Research Council

BULLETIN 484-2003 GASKETED JOINT EMISSIONS AND LEAKAGE

Bureau of Indian Standards

IS 9902-2004 Recommended practice for leak testing

International Telecommunication Union (ITU)

ITU-T P Suppl. 20-1993 Examples of measurements of handset receive-frequency responses: dependence on earcap leakage losses

National Aeronautics and Space Administration (NASA)

NASA-TM-213049-2004 Leakage and Power Loss Test Results for Competing Turbine Engine Seals

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

SERIE P SUPP 20 SPANISH-1993 EJEMPLOS DE MEDICIONES DE RESPUESTAS EN LAS FRECUENCIAS DE RECEPCI?N DEL MICROTEL?FONO Y SU DEPENDENCIA CON RESPECTO A LAS P?RDIDAS POR FUGA DEL AURICULAR

Standard Association of Australia （SAA）

AS 2889:1987 Microwave oven leakage detectors for household use