metal hydrogen metal

metal hydrogen metal, Total:200 items.

The international standard classification for "metal hydrogen metal" includes: Corrosion of metals , Energy and heat transfer engineering in general , Welding consumables , Other non-ferrous metals and their alloys , Wind turbine systems and other alternative sources of energy , Non-ferrous metals , Powder metallurgy , Alkaline secondary cells and batteries , Occupational safety. Industrial hygiene , Bases , Acid secondary cells and batteries .

The Chinese standard classification for "metal hydrogen metal" includes: Metal chemical property test method , New energy and others , Welding and cutting , Rare metals and their alloys , Metal and alloy powder , Powder metallurgy material and product , Electrical energy storage device , Production environment safety and health facilities , Electrochemical power source , Powder metallurgy analysis method , Inorganic acid and alkali , Metal physical property test method .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16423-2020 Safety regulations for metal and non-metal mines
GB/T 18332.2-2001 Nickel-metal hydride batteries for electric road vehicles
GB/T 4164-2008 Metallic powders - Determination of hydrogen reducible oxygen content
GB/T 26412-2010 RE-base AB5 hydrogen storage alloy powder used in negative pole of nickel metal hydride batteries
GB/T 15970.11-2022 Corrosion of metals and alloys—Stress corrosion cracking—Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
GB/T 18288-2000 General specification of nickel-metal hydride battery for cellular phone
GB 16423-2020 Safety regulation for metal and nonmetal mines
GB/T 31963-2015 RE-Mg-Ni-base superlattice hydrogen storage powder used in negative electrodes of nickel-metal hydride batteries
GB/T 13322-1991 Metal coating－Cd-Ti plating of low hydrogan embrittlement
GB/T 5158-1999 Metallic powders-Determination of loss of mass on hydrogen reduction （hydrogen loss）
GB/T 4164-2002 Metallic powders--Determination of hydrogen-reducible oxygen content
GB/T 3965-1995 Methods for determination of diffusible hydrogen in deposited metal
GB/T 3965-2012 Determination of diffusible hydrogen in deposited metal
GB/T 44399-2024 Reversible metal hydride hydrogen storage system for transportable application
GB/T 33292-2016 Metal hydride hydrogen storage system for fuel cells backup power

未注明发布机构

FORD E-MR004-4009-1984 METAL MOULD WASH-HYDRATED LIME

Taiwan Provincial Standard of the People's Republic of China

CNS 14894-2005 General rules for determination of hydrogen in metallic materials

Professional Standard - Chemical Industry

HG/T 3942-2007 Sodium hydroxide for industrial use-Determination of metal and nonmetal ions content-ICP method

Group Standards of the People's Republic of China

T/CIET 810-2024 Tech Requirements for Metal Hydride Graphene Composite Solid-State Hydrogen Storage Materials
T/CIECCPA 059-2025 Liquid metal catalytic thermal cracking device for producing hydrogen from natural gas
T/CSTM 00970-2024 RE-Y-Ni-based superlattice hydrogen storage alloy powder used in negative electrode of nickel-metal hydride batteries
T/CIET 364-2024 Technical specification for hydrogen production from metal cracking water vapor
T/CIET 734-2024 Technical requirements for metal hydride solid hydrogen storage equipment
T/CSTE 0594-2024 Safety technical specification for use of reversible metal hydride hydrogen storage system
T/ZZB 1556-2020 Cylinder sealed alkaline nickel-metal hydride cell

Professional Standard - Non-ferrous Metal

YS/T 484-2005 Method for measuring the discharge capacity of the hydrogen storage alloys as the negative electrode of the metal hydride-nickel battery

Military Standard of the People's Republic of China-General Armament Department

GJB 3251-1998 General specification for metal hydride-nickel storage battery packs
GJB 3251A-2011 General specification for nickel.metalhydride rechargeable batteries

Professional Standard - Automobile

QC/T 744-2006 Nickle-metal hydride batteries for electric vehicles

British Standards Institution (BSI)

BS 6693-2:1986 Diffusible hydrogen-Method for determination of hydrogen in manual metal-arc weld metal
BS 6693-2:1986(1999) Diffusible hydrogen — Part 2 : Method for determination of hydrogen in manual metal - arc weld metal
BS EN ISO 7539-11:2014 Corrosion of metals and alloys. Stress corrosion cracking. Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
BS ISO 7539-11:2013 Corrosion of metals and alloys. Stress corrosion cracking. Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
BS 6693-1:1986(1999) Diffusible hydrogen — Part 1 : Method for determination of hydrogen in manual metal - arc weld metal using 3 day collection
11/30219194 DC BS ISO 7539-11. Corrosion of metals and alloys. Stress corrosion cracking. Part 11. Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
BS 6693-3:1988(1999) Diffusible hydrogen — Part 3 : Primary method for the determination of diffusible hydrogen in manual metal - arc ferritic steel weld metal
BS ISO 11596:2021 Jewellery and precious metals. Sampling of precious metals and precious metal alloys
BS ISO 16111:2008 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
BS ISO 16111:2009 Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
21/30423079 DC BS ISO 11596. Jewellery and precious metals. Sampling of precious metals and precious metal alloys
BS ISO 16111:2018 Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
BS ISO 4782:1987 Specification for metal wire for industrial wire screens and woven wire cloth
BS EN ISO 9202:2019 Jewellery and precious metals. Fineness of precious metal alloys
BS ISO 4782:1998 Specification for metal wire for industrial wire screens and woven wire cloth
BS 6693-1:1986 Diffusible hydrogen-Method for determination of hydrogen in manual metal-arc weld metal using 3 day collection
BS 6615:1985 Specification for dimensional tolerances for metal and metal alloy castings
BS 2936-1:1981 Card clothing wire-Glossary of terms for metallic card clothing

General Motors do Brasil

GMSA EMS 9309663-2011 Metal - metal adhesive - medium resistance - high tixotropy - medium expansion Adesivo metal-metal - m閐ia resist阯cia - alta tixotropia - m閐ia expans鉶 Do Not use on New Programs; No Replacement

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 7539-11:2016 Corrosion of metals and alloys -- Stress corrosion testing -- Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking

Korean Agency for Technology and Standards (KATS)

KS C 8543-2015(2020) Vented nickel-metal hydride secondary cells
KS C 8543-2015(2025) Vented nickel-metal hydride secondary cells
KS D 1777-2021 General rules for determination of hydrogen in metallic materials
KS D 1777-2016 General rules for determination of hydrogen in metallic materials
KS D 1777-1993 General rules for determination of hydrogen in metallic materials
KS C 8544-2016(2021) Sealed nickel-metal hydride secondary cells
KS C 8544-2011 Sealed nickel-metal hydride secondary cells
KS C IEC 61951-2:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes-Portable sealed rechargeable single cells-Part 2:Nickel-metal hydride
KS C 8543-2015 Vented nickel-metal hydride secondary cells
KS C 8543-2009 Vented nickel-metal hydride secondary cells
KS D 1777-2011 General rules for determination of hydrogen in metallic materials
KS B ISO 16111-2009(2020) Transportable gas storage devices－Hydrogen absorbed in reversible metal hydride
KS B ISO 16111:2009 Transportable gas storage devices－Hydrogen absorbed in reversible metal hydride
KS D 8300-2018 Gold brazing filler metals
KS C IEC 61436-2006(2016) Sealed nickel-metal hydride rechargeable single cells

GCC Standardization Organization

GSO ISO 7539-11:2016 Corrosion of metals and alloys -- Stress corrosion testing -- Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
GSO ISO 11596:2023 Jewellery and precious metals — Sampling of precious metals and precious metal alloys
GSO ISO 16111:2015 Transportable gas storage devices -- Hydrogen absorbed in reversible metal hydride

Danish Standards Foundation

DANSK DS/EN ISO 7539-11:2015 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
DANSK DS/ISO 16111:2018 Transportable gas storage devices – Hydrogen absorbed in reversible metal hydride

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 7539-11:2017 Corrosion of metals and alloys -- Stress corrosion testing -- Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
BH GSO ISO 11596:2023 Jewellery and precious metals — Sampling of precious metals and precious metal alloys
BH GSO ISO 16111:2017 Transportable gas storage devices -- Hydrogen absorbed in reversible metal hydride

Spanish Association for Standardization (UNE)

UNE-EN ISO 7539-11:2015 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013)
UNE 7425:1986 METALLIC MATERIALS. WIRE. WRAPPING TEST.
UNE 7-425-1986 metallic material. metal wire. Curling test

Association Francaise de Normalisation

NF A05-501-11*NF EN ISO 7539-11:2015 Corrosion of metals and alloys - Stress corrosion testing - Part 11 : guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen assisted cracking
FD E29-753:2014 Gas cylinders - Hydrogen compatibility testing for metals
NF A06-620*NF ISO 11596 :2022 Jewellery and precious metals - Sampling of precious metals and precious metal alloys
NF X11-513*NF ISO 4782:1991 Metal wire for industrial wire screens and wowen wire cloth.
NF A07-020*NF EN ISO 9202:2019 Jewellery and precious metals - Fineness of precious metal alloys
NF P34-402:1987 Roofing. Metal. Preformed metallic flashings. Requirements.
NF ISO 4782:1991 Metal wires for sieves and metal fabrics

Czech Standards Institute (UNMZ)

CSN 42 0890 Cast.5-1981 Testlng of metal powders. Determination of mass loss of metal powder at annealing in hydrogen
CSN 42 0480-1982 Aluminium and aluminium alloys. Determination of hydrogen content in liquid mettal
CSN 65 2063-1981 SODIUM HYDROXIDE TECHNXCAL Methods for Datorminatioii of Hoavy Metals
CSN 65 2106-1986 Potassium hydroxide for industrial use. Determination of heavy metals content. Hydrogen sulphide method
CSN 03 8137-1989 Corrosion prevention. Metals, alloys and metal coatings. Metallographic examination of corrosion failure of metals
CSN 65 1410-1961 Alkali hydroxides, technical echnical delivery code

German Institute for Standardization

DIN SPEC 3456:2024-12 Guideline on requirements for metallic valves for hydrogen application within European standardization
DIN EN ISO 7539-11:2015-03 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013); German version EN ISO 7539-11:2014
DIN EN ISO 7539-11 E:2014-08 Corrosion stress corrosion cracking of metals and alloys Part 11: Guidelines for testing resistance to hydrogen embrittlement and hydrogen-assisted cracking of metals and alloys (draft)
DIN EN ISO 7539-11 E:2014 Draft Document - Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013); German version FprEN ISO 7539...
DIN EN ISO 7539-11:2015 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013); German version EN ISO 7539-11:2014
DIN 8572-2:1981 Determination of hydrogen in deposited weld metals Part 2
DIN 2032:1987-06 Metal packages; screwed closures of light gauge metal
DIN EN ISO 9202:2019-09 Jewellery and precious metals - Fineness of precious metal alloys (ISO 9202:2019); German version EN ISO 9202:2019
DIN 1707:1973 Soft solder metals for heavy and non-heavy metals (except light metals) Composition, use and technical terms
DIN ISO 7802 E:2014-04 Metallic materials - Wire - Wrapping test
DIN ISO 7802:2008 Metallic Materials - Wire - Wrapping test (ISO 7802:1983); English version of DIN ISO 7802-2008-10
DIN 1725-5:1986 Aluminium alloys, casting alloys; ingots (pigs), liquid metal; composition

Bureau of Indian Standards

IS 18435-11-2023 Corrosion of metals and alloys Stress corrosion testing Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking —— Guidelines
IS 5644-1985 Method for determination of hydrogen loss from metal powders
IS 497-1953 Tensile testing of metals (non-ferrous)

Ente Nazionale Italiano di Unificazione

UNI EN ISO 7539-11:2015 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
UNI 5821:1966 Powder metallurgy. Determination of the degree of oxidation of metal powders by weight loss in hydrogen
UNI ISO 11596:2022 Jewellery and precious metals - Sampling of precious metals and precious metal alloys
UNI EN 1904:2001 Precious metals - The finenesses of solders used with precious metal jewellery alloys
UNI 2331-1:1980 Woven metal wire cloths for sieving. Metal wires.
UNI EN ISO 9202:2019 Jewellery and precious metals - Fineness of precious metal alloys

National Standardisation Body (ASRO)

STAS 10047/2-1985 Metals welding DETERMINATION OF DIFFUSIBLE HYDROGEN IN SUBMERGED ARC WELDED METAL, BY VACUUM EXTRACTION METHOD
STAS 10047/1-1981 Metal Welding DETERMINATION OF DIFUSIBLE HYDROGEN IN DEPOSITED METAL WITH COVERED ELECTRODES BY THE METHOD OF EXTRACTION IN VACUUM
STAS 10385-1975 Testing of metals DRIFT EXPANDING TEST ON LIGHT METAL AND LIGHT METAL ALLOY TUBES
STAS 2345-1982 Metallic furniture SAFETY LOCKS FOR METALLIC CASES

International Organization for Standardization (ISO)

ISO 7539-11:2013 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
ISO 4491:1978 Metallic powders — Determination of loss of mass on hydrogen reduction (hydrogen loss)
ISO 4493:1981 Metallic powders — Determination of hydrogen reducible oxygen content
ISO 11596:2021 Jewellery and precious metals — Sampling of precious metals and precious metal alloys
ISO 16111:2018 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
ISO 16111:2008 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
ISO 4782:1981 Industrial wire screens and woven wire cloth — Diameters of metal wire
ISO/TS 16111:2006 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
ISO/R 956:1969 Tensile test for light metal and light metal alloy wires

European Committee for Standardization (CEN)

EN ISO 7539-11:2014 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013)
CWA 17794-2021 Measurement of diffusible hydrogen in metallic materials - HELIOS 4 HOT PROBE method

Gosstandart of Russia

GOST 21132.0-1975 Aluminium alloys. Method for determination of hydrogen content in molten metal
GOST 22720.1-1977 Rare metals and their alloys. Methods for the determination of oxygen, hydrogen, nitrogen and carbon
GOST 34061-2017 Welding and allied processes. Determination of hydrogen content in deposited metal and arc weld metal
GOST 24956-1981 Titanium and titanium alloys. Method for the determination of hydrogen
GOST R 50965-1996 Aluminium and aluminium alloys. Method for determination of hydrogen in solid metal
GOST 29006-1991 Metallic powders. Method for determination of hydrogen-reducible oxygen
GOST R ISO 16111-2024 Transportable devices and systems for hydrogen storage based on metal hydrides
GOST 9.005-1972 Unified system of corrosion and ageing protection. Metals, alloys, metallic and non-metallic coatings. Permissible and impermissible contacts with metals and non-metals
GOST R 57128-2016 Ferroalloys, metal chromium and metal manganese. General specifications
GOST 27069-1986 Ferroalloys, metal chromium and metal manganese. Methods for determination of carbon

American Welding Society (AWS)

WRC 036:1957 Ultra-High-Strength Weld Metal with Low-Hydrogen Electrodes
WRC 220:1976 Metal-to-Metal Adhesive Bonding
WRC 210:1975 The Fabrication of Dissimilar Metal Joints Containing Reactive and Refractory Metals

Society of Automotive Engineers (SAE)

SAE ARP1525-1977 HYDROGEN EMBRITTLEMENT EFFECT ON METALS/CHEMICALS

Standard Association of Australia （SAA）

AS 2505.1:2004 Metallic materials - Sheet, strip and plate - Bend tests
AS 2505.1:2004(R2017) Metallic materials - Sheet, strip and plate - Bend tests
AS 4738.1:2007/Amdt 1:2008 Metal casting black metal sand mold
AS 2403:2008 Metallic materials - Sheet and strip - Determination of plastic strain ratio
AS 2505.2:2004 Metallic materials - Bars, rods and solid shapes - Bend tests
AS ISO 16111:2020 Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride
AS 2505.2:2004(R2017) Metallic materials - Bars, rods and solid shapes - Bend tests

Standards Norway

NS-EN ISO 7539-11:2014 Corrosion of metals and alloys — Stress corrosion testing — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013)
NS 1189:1964 Metal plating — Testing of the adherence of metallic coatings on metallic materials

Japanese Industrial Standards Committee (JISC)

JIS Z 3113:1975 Method for measurement of hydrogen evolved from deposited metal
JIS Z 2614:1990 General rules for determination of hydrogen in metallic materials
JIS Z 3118:2022 Determination of diffusible hydrogen content in steel weld metal
JIS C 8708:2004 Sealed nickel-metal hydride rechargeable single cells
JIS C 8708:1997 Sealed nickel-metal hydride rechargeable single cells

Swedish Institute for Standards

SS-EN ISO 7539-11:2014 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013)
SIS SS 11 73 05-1979 Metallic powders — Determination of loss of mass on hydrogen reduction
SIS SS 06 27 01-1979 Welding electrodes — Covered electrodes — Determination of hydrogen in deposited weld metal
SIS SS 11 26 58-1983 Metallic materials - Wire - Wrapping test
SIS 11 26 42-1967 Flanging test on tubes

Magyar Szabványügyi Testület

MSZ 2671-1965 Metal cutting and scrap metal
MSZ KGST 1883-1979 Determination of heavy metal content in industrial sodium hydroxide
MSZ 950-1961 Metal
MSZ 6577-1984 Inorganic coatings for metals and non-metals
MNOSZ 5046-1952 Large metal cutting machinery. metal separation
MSZ 7151-1963 Hard metal plates for metal cutting machines

GM Holden Ltd

HOLDEN HN 1580-2002 Adhesive - Metal to Metal
HOLDEN HN 1435-2013 Adhesive - Metal to Metal - Butyl Type
HOLDEN HN 1435-1976 Adhesive - Metal to Metal - Butyl Type
HOLDEN HN 2079-1991 Adhesive - Metal to Metal - Non-Flammable

Polski Komitet Normalizacyjny (PKN)

PN C84039-09-1988 Potassium hydroxide technical Determination of heavy metals content
PN H04964-1991 Metallic powders. Determination of oxygen content by hydrogen-reducible method
PN H01705-1987 Nonferrous Desiqnations of grades for metals and alloys

Canadian General Standards Board （CGSB)

CAN/CGSB 8.1-1988 Wire cloth control sieves, non-metric

Welding Research Council

BULLETIN 220-1976 METAL-TO-METAL ADHESIVE BONDING
BULLETIN 36-1957 ULTRA-HIGH STRENGTH WELD METAL WITH LOW-HYDROGEN ELECTRODES

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 3801-1983 Sodium hydroxide technical.Method of test for heavy metal

Finnish Standards Institute

SFS 2208-1967 Copper metal, casting alloy. Red metal, alloy CuSn10Zn2
SFS 2209-1967 Copper metal, casting alloy. Red metal, alloy CuPb5Sn5Zn5
SFS 2207-1967 Copper metal, casting alloy. Red metal, alloy CuSn7Pb6Zn3

Türk Standardları Enstitüsü

TS 925-1971 FRICTION L?NINGS FOR CLUTCHES (METALLIC, SEMIMETALLIC AND METAL -CERAMIC)

Electronic Components, Assemblies and Materials Association

ECA 377-1970 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application ANSI C83.62-71

American Society for Testing and Materials (ASTM)

ASTM E608/E608M-24 Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples

American Petroleum Institute (API)

API TR 21C-2025 Evaluating Metallic Material Performance in High-pressure Hydrogen Gas

Canadian Standards Association (CSA)

CSA W48.7-M1977-1977 Diffusable Hydrogen in Mild Steel and Low-Alloy Steel Weld Metals: Test Method
CSA C22.2 No.56-1977(R2003) Flexible Metal Conduit and Liquid-Tight Flexible Metal Conduit
CSA C22.2 No.56-2017(R2022) Flexible metal conduit and liquid-tight flexible metal conduit
CSA C22.2 No.56-2004(R2009) Flexible Metal Conduit and Liquid-Tight Flexible Metal Conduit
CSA C22.2 No.56-1961 Flexible Metallic Conduit and Liquid-Tight Flexible Metallic Conduit