Two-step method Three-step method
Two-step method Three-step method, Total:114 items.
The international standard classification for "Two-step method Three-step method" includes: Rotating machinery in general , Generators , Motors , Belt drives and their components , Construction equipment , Rotating machinery , Electrical apparatus for explosive atmospheres .
The Chinese standard classification for "Two-step method Three-step method" includes: Synchronous machine , Asynchronous machine , Electric rotating machinery in general , Chain drive, belt drive and key joint , Special machine , Technical management , Architectural engineering construction machinery , Steam turbine and its auxiliary equipment , Explosion-proof electric machine .
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 1032-2005 Test procedures for three-phase induction motors
- GB/T 1032-2023 Iron ores—Determination of specific surface area—Test method using air-permeability apparatus (Blaine)
- GB/T 20137-2006 Method for determining losses and efficiency of three-phase cage induction motors
- GB/T 1032-2012 Test procedures for three-phase induction motors
- GB/T 1029-2005 Test procedures for three-phase synchronous machines
- GB/T 10716-2012 Synchronous belt drives - Automotive belts - Determination of physical properties
- GB/T 21975-2008 Method of test for reliability of three-phase induction motors for crane and metallurgical application
- GB 12497-1995 Th re e-p h as ei nd uc tio n m ot or
- GB/T 8916-1988 Test procedure on working site for measuring the loading percentage of a three phase induction motor
- GB/T 12497-2006 Three-phase induction motors economic operation
- GB/T 22669-2008 Test procedures for three-phase permanent magnet synchronous machines
- GB/T 1029-1993 Test procedures for three-phase synchronous machines
- GB/T 1032-1985 Test procedure for three-phase induction motors
国家市场监督管理总局、中国国家标准化管理委员会
- GB/T 1029-2021 Test procedures for three-phase synchronous machines
Group Standards of the People's Republic of China
- T/SXSP 002-2022 One-step cooked meat products
- T/CHCA 001-2019 Technical Guidelines for Three-step and Seven-step Excavation Method of Highway Tunnel
- T/QGCML 4158-2024 General technical specifications for two-step opening solenoid valves
- T/ZZB 0058-2016 Three-phase induction motor
- T/ZZB 0283-2017 Integrated permanent magnet conversion frequency two-stage compression screw air compressor
Taiwan Provincial Standard of the People's Republic of China
- CNS 15024-4-2006 Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs
Professional Standard - Construction Industry
- JG/T 5049.2-1994 Vibratory pile hammer Test procedures for vibration resistat asynchronous three-phase motor
Fujian Provincial Standard of the People's Republic of China
- DB35/T 1780-2018 Gait Test Method
Military Standard of the People's Republic of China-General Armament Department
- GJB 6912-2009 General specifications for amphibious armored infantry fighting vehicles
Professional Standard - Machinery
- JB/T 56105-1999 Three-phase Asynchronous Motors Intended to Be Used in Hoisting and Metallurgy Work. Reliability Test Method
- JB/T 7823-1995 Three-phase linear asynchronous motor
- JB/T 10391-2002 Series Y three-phase asynchronous motor
- JB/T 6222-2007 Three-phase disc type-brake asynchronous motors
- JB/T 7565.1-2011 Specification of flameproof three-phase asynchronous motor —Part 1：Series YB3 flameproof three-phase asynchronous motor（Frame size 63 to 355）
- JB/T 8680.1-1998 Three-phase induction motors - Part 1: Y2 series (IP54) three-phase asynchronous motor (frame size 63 to 355)
Professional Standard - Military and Civilian Products
- WJ 9008-1992 Sports step, pistol test method
- WJ/T 9008-1992 Sport rifle and pistol test method
- WJ 1769-1988 civilian rifle test method
Hebei Provincial Standard of the People's Republic of China
- DB13/ 50-1991 Three-phase asynchronous motor operation monitoring
Inner Mongolia Provincial Standard of the People's Republic of China
- DB1507/T 67-2021 Sanhe horse speed training technical regulations
Xinjiang Provincial Standard of the People's Republic of China
- DB65/T 4529-2022 Energy saving monitoring of three-phase asynchronous motor
Professional Standard - Aerospace
- QJ 2296-1992 可靠性
工业和信息化部
- JB/T 13729-2020 High efficiency three-phase asynchronous motor in ships
RU-GOST R
- GOST 10169-1977 3-phase synchronous machines. Test methods
RO-ASRO
- STAS 8211-1984 THREE PHASE SYNCHRONOUS MACHINES Methods of test
- SR 7246/C1-1999 Three phase asynchronous motors. Test methods
- SR 7246-1998 Three phase asynchronous motors. Test methods
- STAS 7246/4-1974 ASYNCHRONOUS TRIPHASE MOTORS Test methods. Voltage ratio measurement
- STAS 7246/2-1974 ASYNCHRONOUS TRIPHASE MOTORS Test methods Reslstance test
- STAS 7246/3-1974 ASYNCHRONOUS TRIPHASE MOTORS Test methods. Insulation test
- STAS 7246/6-1974 ASYNCHRONOUS THREEPHASE MOTORS Test methods Locked — rotor test
- STAS 7246/5-1974 ASYNCHRONOUS THREEPHASE MOTORS Test methods No-load test
- STAS 7246/9-1974 THREE-PHASE INDUCTION MOTORS Methods of test Eeteimination of on load performances
- STAS E 11017-1978 THREE PHASE ASYNCHRONOUS MOTORS WiTH SHORT-CIRCUITED ROTOR Test method for reliability
- STAS 7180-1979 ONE-STEP RE SIN
US-FCR
- FCR COE ETL 1110-2-182-1974 TWO-STEP FORMAL ADVERTISING
- FCR COE ER 1180-1-7-1982 ONE STEP COMPETITIVE NEGOTIATION AND TWO STEP FORMAL ADVERTISING
- FCR UFGS-26 29 02.00 10-2008 ELECTRIC MOTORS, 3-PHASE VERTICAL SYNCHRONOUS TYPE
HU-MSZT
- MNOSZ 19096-1954 three step equipment
CZ-CSN
- CSN 35 0760-1985 ' Two-phase asynchronous servomotors
Korean Agency for Technology and Standards (KATS)
- KS C 4201-1986 Testing methods of three-phase induction motor characteristics
- KS C 4201-1997 Testing methods of three-phase induction motor characteristics
- KS C 4201-2003 Testing methods of three-phase induction motor characteristics
- KS C 4201-2002 Testing methods of three-phase induction motor characteristics
- KS C IEC 61972:2015 Method for determining losses and efficiency of three-phase cage induction motors
- KS C IEC 61972:2006 Method for determining losses and efficiency of three-phase cage induction motors
- KS C IEC 61972-2006(2011) Method for determining losses and efficiency of three－phase cage induction motors
- KS A IEC 61650:2003 Reliability data analysis techniques-Procedures for comparison of two constant failure rates and two constant failure(event) intensities
- KS C 4203-1983 General-purpose high-voltage three-phase induction motor
- KS C 4202-2013 Low-voltage three-phase squirrel-cage induction motors for general purpose
- KS C 4203-2003 High－voltage three－phase induction motors for general purpose
- KS C 4203-1997 High voltage three-phase asynchronous motor universal
- KS C 4202-1985 Low-voltage three-phase squirrel-cage induction motors for general purpose
- KS C 4202-1997 Low-voltage three-phase squirrel-cage induction motors for general purpose
- KS C 4202-1990 Low-voltage three-phase squirrel-cage induction motors for general purpose
- KS C 4202-2009 Low-voltage three-phase squirrel-cage induction motors for general purpose
- KS C 4203-2003(2018) General-purpose high-voltage three-phase induction motor
- KS X ISO/IEC 15294-2021 Information technology－Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
- KS X ISO/IEC 15294-2010(2017) Information technology－Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
- KS X ISO/IEC 15294-2010(2021) Information technology－Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
International Organization for Standardization (ISO)
- ISO/CD 8426-1:2023 Hydraulic fluid power — Determination of derived displacement of positive displacement pumps and motors — Part 1: One-step and two-step Toet-method
- ISO 11334-4:1999 Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs
SCC
- VDI/VDE 2189 BLATT 3-1994 Description and investigation of three-point step controllers
- BS PD IEC TS 62312-2:2018 Guideline for synchronization of audio and video-Methods for synchronization of audio and video systems
- DANSK DS/ISO/IEC TR 15294:2000 Information technology - Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
Defense Logistics Agency
- DLA AN3052 REV 5 VALID NOTICE 3-2008 Ferrule and Conduit, Flexible, Two Step
PL-PKN
- PN E04272-1972 Rotating electrical machinery Thresphase induction motors Tests methods
United States Navy
- NAVY AN3083 REV 2 NOTICE 1-1996 FERRULE-CONDUIT, FLEXIBLE, TWO STEP, SYNTHETIC COVERED
- NAVY AN3083 REV 2-1952 FERRULE-CONDUIT, FLEXIBLE, TWO STEP, SYNTHETIC COVERED
American Society for Testing and Materials (ASTM)
- ASTM D5392-93(2006) Standard Test Method for Isolation and Enumeration ofEscherichia Coli in Water by the Two-Step Membrane Filter Procedure
- ASTM D5392-19 Standard Test Method for Isolation and Enumeration of
Escherichia coli in Water by the Two-Step Membrane Filter Procedure - ASTM D5392-93(2000) Standard Test Method for Isolation and Enumeration of Escherichia Coli in Water by the Two-Step Membrane Filter Procedure
- ASTM D5392-14 Standard Test Method for Isolation and Enumeration of
Escherichia Coli in Water by the Two-Step Membrane Filter Procedure
DIN
- DIN 79016:2024 Hiking, trekking, walking and winter touring poles - Requirements and test methods
VN-TCVN
- TCVN 2280-1978 Three-phase asynchronous electric motors 100 W and higher power.Test methods
- TCVN 1987-1994 Three-phase asynchronous squirrel electrical cage motors from 0,55 to 90 kW
- TCVN 5412-1991 Two-phase asynchronous controllable motors.Basic parameters and specifications
Association Francaise de Normalisation
- NF S96-310*NF EN ISO 11334-4:1999 Walking aids manipulated by one arm. Requirements and test methods. Part 4 : walking sticks with three or more legs.
International Electrotechnical Commission (IEC)
- IEC 61972:2002 Method for determining losses and efficiency of three-phase cage induction motors
American National Standards Institute （ANSI)
- ANSI/SCTE 53-2008 Methods for Asynchronous Data Transport
Indonesia Standards
- SNI 03-3429-1994 Fly bridges for pedestrian, Code of practice
- SNI 04-1077-1989 Synchronous generator, Test methods
British Standards Institution (BSI)
- BS EN ISO 11199-3:2005 Walking aids manipulated by both arms - Requirements and test methods - Walking tables
- BS EN ISO 11199-1:1999 Walking aids manipulated by both arms - Requirements and test methods - Walking frames
- PD IEC TS 62312-2:2018 Guideline for synchronization of audio and video. Methods for synchronization of audio and video systems
- BS EN ISO 11334-4:1999 Walking aids manipulated by one arm - Requirements and test methods - Walking sticks with three or more legs
International Telecommunication Union (ITU)
- ITU-T X.52 FRENCH-1988 METHOD OF ENCODING ANISOCHRONOUS SIGNALS INTO A SYNCHRONOUS USER BEARER
- ITU-T X.52-1988 METHOD OF ENCODING ANISOCHRONOUS SIGNALS INTO A SYNCHRONOUS USER BEARER
- ITU-T X.520 CORR 1-2008 Information technology ?Open Systems Interconnection ?The Directory: Selected attribute types Technical Corrigendum 1 Study Group 17
JP-JEM
- JEM 1491-2010 High voltage three-phase induction motors in ships
European Committee for Standardization (CEN)
- EN ISO 11334-4:1999 Walking Aids Manipulated by One Arm - Requirements and Test Methods - Part 4: Walking Sticks with Three or More Legs ISO 11334-4:1999
GOST
- GOST 185-1970 Three-phase asynchronous crane motors. Specifications
The American Road & Transportation Builders Association
- AASHTO DIVISION I-A 4.6 Time History Method - Procedure 4
- AASHTO DIVISION I-A 4.3 Uniform Load Method - Procedure 1
JSAE - Society of Automotive Engineers of Japan@ Inc.
- JASO E110-2000 Test Methods of Automotive Synchronous Belts
GSO
- GSO ISO/IEC TR 15294:2013 Information technology -- Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
- BH GSO ISO/IEC TR 15294:2016 Information technology -- Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
- OS GSO ISO/IEC TR 15294:2013 Information technology -- Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
German Institute for Standardization
- DIN 79016 E:2016-05 Hiking, trekking, walking and touring ski poles - Requirements and test methods
- DIN 79016:2023-11 Hiking, trekking, walking and touring ski poles - Requirements and test methods / Note: Date of issue 2023-09-29*Intended as replacement for DIN 79016 (2017-01).
Quantitative two-step method,Quantitative three-step method,two step method,Streaming two-step method,Streaming two-step method,Two-step method Three-step method,Two-step method Three-step method,Two-step and three-step methods,Quantitative two-step method three-step method,Three-step method and two-step method
