How to sample the particle size distribution

How to sample the particle size distribution, Total:116 items.

The international standard classification for "How to sample the particle size distribution" includes: Protection against dangerous goods , Particle size analysis. sieving .

The Chinese standard classification for "How to sample the particle size distribution" includes: Marking, packaging, transport and storage in general , Sieving, Sieve Plate and Sieve Screen .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15445.2-2006 Representation of results of particle size analysis - Part 2: Calculation of average particle size/diameters and moments from particle size distibutions
GB/T 22231-2008 Particle size distribution/fibre length and diameter distributions

Taiwan Provincial Standard of the People's Republic of China

CNS 14316-1999 General rules of the sample preparation for particle size analysis of fine ceramic raw powder

Association Francaise de Normalisation

NF P18-622-1:1997 Tests for geometrical properties of aggregates. Part 1 : determination of particle size distribution. Sieving method.
NF X11-635:1985 Size analysis-Representation of particle size distributions - Reference models
NF ISO 9138:2015 Abrasive Grains - Sampling and Division
NF E75-232*NF ISO 9138:2015 Abrasive grains - Sampling and splitting
NF E75-232:1993 Abrasive grains. Sampling and splitting.

Indonesia Standards

SNI 3962:2018 Cara uji distribusi ukuran partikel sedimen secara gravimetri dengan ayakan

European Committee for Standardization (CEN)

prEN 933-1-1992 Tests for geometrical properties of aggregates; part 1: determination of particle size distribution; granulometric analysis (sieving method)
PREN 933-2-2019 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves@ nominal size of apertures

International Telecommunication Union (ITU)

ITU-T R.9-1993 How the Laws Governing Distribution of Distortion Should Be Arrived at - Telegraphy Telegraph Transmission (Study Group IX) 4 pp
ITU-T R.9-1984 How the laws governing distribution of distortion should be arrived at
ITU-T R.9-1976 How the laws governing distribution of distortion should be arrived at
ITU-T R.9-1980 How the laws governing distribution of distortion should be arrived at

Swedish Institute for Standards

SS-EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
SIS SS 02 71 23-1992 Geotechnical tests — Particle size distribution — Sieving
SIS SS 13 21 12-1978 Concrete testing — Aggregate — Particle size distribution
SS-EN 933-2:1996 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
SIS SS 02 71 24-1992 Geotechnical tests — Particle size distribution — Sedimentation, hydrometer method

Ente Nazionale Italiano di Unificazione

UNI EN 933-1:1999 Tests for geometrical properties of aggregates - Determination of particle size distribution - Sieving method
UNI EN 933-2:2020 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
UNI EN 933-2:1997 Tests for geometrical properties of aggregates. Determination of particle size distribution. est sieves, nominal size of apertures.
UNI EN 15428:2008 Soil improvers and growing media - Determination of particle size distribution

American Society for Testing and Materials (ASTM)

ASTM F661-92 Practical Method for Measuring Particle Concentration and Size Distribution in Filtrate Samples
ASTM D2862-97(2004) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-97 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM UOP854-85 Size Distribution of Solid Phosphoric Acid Catalyst
ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM D1511-10 Standard Test Method for Carbon Black&8212;Pellet Size Distribution

Korean Agency for Technology and Standards (KATS)

KS B 0508-1994(1999) METHOD OF PREPARING DEPOSITED METAL SAMPLE FOR CHEMICAL ANALYSIS
KS L 6512-2002(2012) Abrasive grains－Sampling and splitting
KS F 2261-1990 Abrasive grains－Sampling and splitting
KS B ISO 9138:2018 Abrasive grains — Sampling and splitting
KS B ISO 9138-2018 Abrasive grains — Sampling and splitting
KS A ISO 9276-2-2014(2019) Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS A ISO 9276-2-2014(2024) Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS A 0095-2007 Determination of particle size distribution by the weight of sedimentation in liquid
KS E 3084-1996(2001) CHROMIUM, MANGANESE AND FERRUGINOUS MANGANESE ORES - SAMPLING AND DETERMINATION OF MOISTURE CONTENT AND SIZE DISTRIBUTION
KS L ISO 14703:2001 Fine ceramics(advanced ceramics, advanced technical ceramics)-Sample preparation for the determination of particle size distribution of ceramic powders
KS M 5976-2003 TEST METHOD FOR PARTICLE SIZE AND DISTRIBUTION OF POWDER COATING

Polski Komitet Normalizacyjny (PKN)

PN C04424-1970 Pigments Fineness Testing
PN-EN 933-2-2021-01 E Tests for geometrical properties of aggregates -- Part 2: Determination of particle size distribution -- Test sieves, nominal size of apertures
PN C04424-02-1985 Pigments Determination of particie size distribution Microscopic method-simple
PN C04424-04-1985 Pigments Determination of particie size distribution Filtration on filter paper
PN C04424-06-1987 Rgments Determination of particie sizedistribution Grindometric method

Standard Association of Australia （SAA）

AS 1141.11.1:2009/Amdt 1:2011 Sampling and testing methods for aggregates Particle size distribution screening method
AS 1141.11.1:2020/Amdt 1:2022 Sampling and testing methods for aggregates Particle size distribution screening method
AS 1141.11.1:2020 Methods for sampling and testing aggregates, Method 11.1: Particle size distribution — Sieving method
AS 1141.11.2:2019 Methods for sampling and testing aggregates, Method 11.2: Particle size distribution for vision sizing systems
AS 1141.11:1980 Methods for sampling and testing aggregates, Method 11: Particle size distribution by dry sieving

Spanish Association for Standardization (UNE)

UNE-EN 933-1:1998 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. SIEVING METHOD.
UNE-EN 933-2:2022 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
UNE-EN 933-2:1996 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES.
UNE-EN 933-2/1M:1999 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES.
UNE 53014:2012 Plastic materials. Determination of particle size and its distribution
UNE-CEN/TS 17434:2020 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS) (Endorsed by Asociación Española de Normalización in May of 2020.)

British Standards Institution (BSI)

BS 3406-1:1986 Methods for determination of particle size distribution - Guide to powder sampling
BS 3406-1:1986(1999) Methods for Determination of particle size distribution — Part 1 : Guide to powder sampling
BS EN ISO 17830:2024 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2024)
BS EN 933-2:2020 Tests for geometrical properties of aggregates - Determination of particle size distribution. Test sieves, nominal size of apertures
BS EN ISO 8049:2016 Ferronickel shot. Sampling for analysis
BS 6043-4.3:1991 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of aggregate size distribution after extraction by dichloromethane
BS ISO 14488:2008 Particulate materials - Sampling and sample splitting for the determination of particulate properties
BS 6043 Sec.4.3:1991 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of aggregate size distribution after extraction by dichloromethane
05/30137091 DC ISO 14488. Particulate materials. Sampling and sample splitting for the determination of particulate properties
BS ISO 1304:2016 Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number
BS PD CEN/TS 17434:2020 Ambient air. Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
BS ISO 1304:2006 Rubber compounding ingredients - Carbon black - Determination of iodine adsorption number

German Institute for Standardization

DIN ISO 9138:2018-01 Abrasive grains – Sampling and splitting
DIN 18123:1996-11 Determination of particle size distribution of soil
DIN ISO 9138 E:2017-04 Abrasive grains - Sampling and splitting
DIN EN 28049:1992 Ferronickel shot; sampling for analysis (ISO 8049:1988); german version EN 28049:1992
DIN ISO 9138:1996-09 Abrasive grains - Sampling and splitting (ISO 9138:1993)
DIN ISO 9138:1996 Abrasive grains - Sampling and splitting (ISO 9138:1993)
DIN EN 16126:2012-05 Solid biofuels - Determination of particle size distribution of disintegrated pellets
DIN EN 933-2:2020 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
DIN EN 933-2:2019-03 Draft Document - Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures; German and English version prEN 933-2:2019
DIN EN 933-2:2020-09 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures; German version EN 933-2:2020
DIN EN 12697-2 A1 E:2017-12 Test methods for bitumen - Part 2: Particle size distribution
DIN EN ISO 8049 E:2015-06 Sampling for analysis of nickel-iron fine particles (draft)
DIN ISO 9138:2018 Abrasive grains - Sampling and splitting (ISO 9138:2015)
DIN EN 16126 E:2010 Draft Document - Solid biofuels - Determination of the particle size distribution of disintegrated pellets; German version prEN 16126:2010
DIN EN 933-2 E:2019-03 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
DIN EN 933-2 E:2019 Draft Document - Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures; German and English version prEN 933-2:2019

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 9138:2016 Abrasive grains -- Sampling and splitting
BH GSO EN 933-2:2024 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
BH GSO ISO 15900:2016 Determination of particle size distribution -- Differential electrical mobility analysis for aerosol particles

National Standardisation Body (ASRO)

STAS 11955-1980 RADIAL BEARINGS WITH SINGLE HOW WINDING CYLINDRICAL ROLLERS Typiiication

Malaysia Standards

MS 81 Pt.12-2001 Method of sampling and test for spices and condiments:Part 12:Determination of particle size

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 9138:2015 Abrasive grains -- Sampling and splitting
OS GSO ISO 15900:2013 Determination of particle size distribution -- Differential electrical mobility analysis for aerosol particles

International Organization for Standardization (ISO)

ISO 8049:2016 Ferronickel shot - Sampling for analysis
ISO 9276-2:2001 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 14488:2007 Particulate materials - Sampling and sample splitting for the determination of particulate properties
ISO 9276-2:2014 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
ISO 8511:1995 Rubber compounding ingredients - Carbon black - Determination of pellet size distribution

Danish Standards Foundation

DANSK DS/EN ISO 17830:2016 Solid biofuels – Particle size distrstørrelsebution of disintegrated pellets
DS/EN 933-2:1999 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
DANSK DS/EN 933-2:2020 Tests for geometrical properties of aggregates – Part 2: Determination of particle size distribution – Test sieves, nominal size of apertures
DS/ISO 15900:2020 Determination of particle size distribution – Differential electrical mobility analysis for aerosol particles
DANSK DS/CEN/TS 17434:2020 Ambient air – Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)

American Petroleum Institute (API)

API PUBL 1546-1965 HOW YOU CAN COOPERATE WITH DISTRIBUTIVE EDUCATION TO DEVELOP DEALERS FOR TOMORROW
API PUBL 1545-1961 Opportunity Around the Corner - How Distributive Education Helps Service Station Dealers

Japanese Industrial Standards Committee (JISC)

JIS M 8108:1992 Chromium, manganese and ferruginous manganese ores -- Sampling and determination of moisture content and size distribution
JIS R 1639-1:1999 Test methods of properties of fine ceramic granules Part 1: Size distribution of granules

Gosstandart of Russia

GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST ISO 8511-2013 Rubber compounding ingredients. Carbon black. Determination of pellet size distribution

Bureau of Indian Standards

IS 15290-2024 Abrasive Grains-Sampling and Splitting

Association of German Mechanical Engineers

VDI 3867 Blatt 1 (2009-09-00) Measure particle number concentration and particle size distribution in atmospheric particulate matter

GCC Standardization Organization

GSO EN 933-2:2024 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
GSO ISO 15900:2013 Determination of particle size distribution -- Differential electrical mobility analysis for aerosol particles

Bureau of Philippine Standards

PNS ISO 9138:2021 Abrasive grains - Sampling and splitting

Lithuanian Standards Office

LST EN 933-2-2001 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4520:1997 Abrasive Grains - Sampling and Splitting (ISO 9138: 1993)

Others: How to Calculate Average Particle Size from Particle Size Distribution,How to measure particle size and particle size distribution,How to analyze particle size distribution,How to analyze the particle size distribution directional,How particle size distribution is used,How to sample the particle size distribution,How to calculate particle size distribution,How to Measure Particle Size Distribution,How Particle Size Distribution is Measured