polymer structure

polymer structure, Total:336 items.

The international standard classification for "polymer structure" includes: Drainage systems , Waterproofing , Insulators , Stainless steels , Mechanical structures for electronic equipment , Optics and optical measurements in general , Iron and steel products in general , Washers, locking elements , Heat-treatable steels , Flat steel products and semi-products , Steels profiles , Measuring instruments , Steel wire, wire ropes and link chains , Nuts , Bolts, screws, studs , Implants for surgery, prosthetics and orthotics , Structures of buildings in general , Metal structures , Construction materials , Other elements of buildings .

The Chinese standard classification for "polymer structure" includes: Outdoor water supply and draining engineering , Roof and pavement waterproof and barrier material , Engineering structure in general , Insulator , Steel and iron products in general , Electrical product mechanical structure , Optical instrument in general , Fastener , Steel sheet and strip , Profile steel and deformed steel , Measuring tool and instrument , Steel wire and wire rope , Special electronic technology material , Orthopedic devices , Special instruments for teaching , Metal structure engineering , Concrete structure engineering , Metal components and accessories .

Group Standards of the People's Republic of China

T/QGCML 1337-2023 Ultra-high molecular weight polyethylene anti-static sintered plate filter element
T/YNSX 003-2022 High molecular weight high density polyethylene (HMWHDPE) hollow structural wall composite pipe
T/CI 057-2022 High strength bolting assemblies for steel structures
T/CECS 10143-2021 High molecular weight high density polyethylene (HMWHDPE) double wave winding structure wall pipe for drainage
T/CECS 10173-2022 Thermally cross-linked polymer felt with skin-core structure based wet installed waterproofing sheets
T/CECS 994-2022 High molecular weight high density polyethylene (HMWHDPE) winding structure wall buried drainage pipeline engineering technical regulations
T/YNSX 007-2022 Large diameter high molecular weight high density polyethylene (HMWHDPE) hollow plastic steel composite winding structural wall drainage pipe
T/ZGM 002-2023 Rigid sintered polymolecular microporous membrane element
T/CIET 719-2024 High-speed motor rotor cooling structure Permanent magnet synchronous motor
T/YNSX 3-2020 High molecular weight high density polyethylene (HMWHDPE) hollow winding structure wall composite pipe
T/QGCML 671-2023 Technical specifications for high hardness multi-segment impact-resistant structure screwdriver bits
T/YNSX 6-2020 High Molecular Weight High Density Polyethylene (HMWHDPE) Double Wave Wound Structural Wall Pipe
T/YNSX 7-2020 Large-diameter high molecular weight high-density polyethylene (HMWHDPE) hollow plastic-steel composite winding structure wall pipe
T/SZBX 104-2022 Structural high strength glulam
T/CIET 1187-2025 Technical requirements for molecular structure design of liquid reactive dyes
T/CECS 10144-2021 Steel-tape reinforced high molecular weight high density polyethylene(HMWHDPE)hollow profile spirally enwound structure wall pipe for drainage
T/YNSX 006-2022 High molecular weight high density polyethylene (HMWHDPE) double crest reinforced reinforced winding structure wall drainage pipe
T/WZBF 053-2024 Ultra high temperature water-cooled structure hard sealed ball valve
T/ZJGS 21-2023 Laminated Padlock Part 1: Pin Structure
T/CSBX 0009-2021 PP composite high-reinforced (HDPE) structural wall pipe
T/CSBX 0009-2025 PP composite high rib (HDPE) structural wall pipe
T/CECS 1019-2022 Technical specification for application of wet-laid waterproof membrane with skin-core structure hot-pressed cross-linked polymer tire base
T/QGCML 2096-2023 Campus electronic filing cabinet hardware structure

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 19520.3-2004 Mechanical structures for electronic equipment―Dimensions of mechanical structures of the 482.6 mm(19in) series―Part 3:Subracks and associated plug-in units
GB/T 35841-2018 High strength steel plate for dump truck structure
GB/T 19520.17-2010 Mechanical structures for electronic equipment - Dimension of mechanical structures of the 482.6 mm（19 in）series - Part 3-105: Dimensions and design aspects for 1U high chassis
GB/T 1230-2006 High Strength Plain Washers for Steel Structures
GB/T 19520.7-2004 Mechanical structures for electronic equipemnt—Dimensions of mechanical structures of the 482.6mm(19in)series—Part 5-102:Subracks and associated plug-in units—Electromagnetic shielding provision
GB/T 1591-1994 High strength low alloy structural steels
GB/T 16270-2009 High strength structural steel plates in the quenched and tempered condition
GB/T 33943-2017 High-strength structural anchor bolting assemblies for steel structures
GB/T 1591-2008 High Strength Low Alloy Structural Steels
GB/T 4171-2000 Superior atmospheric corrosion resisting structural steel
GB/T 1229-2006 High Strength Large Hexagon Nuts for Steel Structures
GBJ 135-1990 Specifications for the design of highrise structures
GB/T 19520.2-2007 Mechanical structure for electronic equipment—Dimensions of mechanical structures of the 482.6mm(19 in) series—Part 2:Cabinets and pitches of rack structures
GB/T 34560.4-2017 Structural steels - Part 4: Technical delivery conditions for high yield strength quenched and tempered structural steel plates
GB/Z 21738-2008 Fundamental structures of one dimensional nanomaterials - High resolution electron microscopy characterization
GB/T 37430-2019 High strength stainless structural steel for constructions
GB/T 5593-1996 Structure ceramic materials usec in electronic components
GB/T 28909-2012 Extra-high strength structural steel plates in the heat-treatment condition
GB/T 5593-2015 Structure ceramic materials used in electronic component and device
GB/T 19520.1-2007 Mechanical structure for electronic equipment?Dimensions of mechanical structures of the 482.6mm(19 in) series?Part 1:Panels and racks
GB/T 1229-1991 High strength large hexagon nuts for steel structures
GB/T 1591-2018 High strength low alloy structural steels
GB/T 33026-2017 High strength steel wire strand for building structures
GB/T 4056-1994 Coupling dimensions of suspension insulators for high voltage lines
GB/T 19520.13-2009 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-102: Injector/extractor handle
GB/T 36175-2018 Special design external micrometer with electronic digital display
GB/T 1230-1991 High strength plain washers for steel structures

Professional Standard - Medicine

YY/T 0813-2010 Standard test method for in situ determination of network parameters of crosslinked ultra high molecular weight polyethylene(UHMWPE)

Ministry of Housing and Urban-Rural Development of the People's Replublic of China

GB 50135-2006 Code for design of high-rising structures
GB/T 51226-2017 Technical standard for mutil-story and high rise timber building
GB 50135-2019 Standard for design of high-rising structures

Professional Standard - Education

JY 52-1980 Technical specifications for molecular structure model (trial)

Professional Standard - Urban Construction

JGJ/T 483-2020 Standard for design of high strength steel structure
CJ/T 3068-1997 Sintered polymolecular microporous tubular filter

Professional Standard - Ferrous Metallurgy

YB 4104-2000 Steel plates for high rise building structure
YB/T 4112-2002 High strength atmospheric corrosion resisting welded steel tubes for structural purposes
YB/T 4836-2020 High frequency welded light gauge H steel sections for construction

Military Standard of the People's Republic of China-General Armament Department

GJB 130.7A-2021 Sandwich structure and core performance test methods Part 7: Sandwich structure roller peeling test method
GJB 130.8A-2021 Sandwich structure and core performance test methods Part 8: 90° peel test method for sandwich structures
GJB 130.9A-2021 Test method for properties of sandwich constructions and core—Part 9: Test method for flexural properties of sandwich constructions
GJB 130.4A-2021 Test method for properties of sandwich constructions and core—Part 4: Test method for flatwise tensile strength of sandwich constructions and core
GJB 130.6A-2021 Test methods for performance of sandwich structures and cores Part 6: Test methods for plane shear properties of sandwich structures and cores

Professional Standard - Recommended Standards for Engineering Construction

CECS 104-1999 Technical Specification for High - Strength Concrete Structures

Anhui Provincial Standard of the People's Republic of China

DB34/T 5001-2019 Technical specification for high-rise steel structure residences

Taiwan Provincial Standard of the People's Republic of China

CNS 4646-1983 Square Taper Washers for High Prestressed I-Sections
CNS 4647-1983 Square Taper Washers for High Prestressed Channels
CNS 11109-2001 High yield strength steel plates for welded structure

National Metrological Verification Regulations of the People's Republic of China

JJG 1183-2021 Structure height gauges for Railway Frogs

Professional Standard - Agriculture

222药典三部-2010 Appendix Ⅷ ⅧL Determination of Polymer Conjugate Content

Professional Standard - Aviation

HB 5269-1983 High quality structural steel bar for aviation

Professional Standard - Machinery

JB/T 2766-1992 PN16.0～32.0MPa forged high pressure valve structure length

Professional Standard - Construction Industry

JG/T 137-2007 High frequency welded
JG/T 137-2001 The high frequency welded light gauge H sections for construction

Professional Standard - Military and Civilian Products

WJ 2029-1991 High Strength Alloy Structural Steel Castings for Guns

Gosstandart of Russia

GOST 33119-2014 Polymer composites constructions for foot-bridges. Specifications
GOST R 57231-2016 Composite polymer radar-absorbing structural. General specifications
GOST R 54923-2012 Polymer composite wall ties for multilayer envelope buildings. Specifications
GOST R 56764-2015 Polymer composites. Method for measurement of thickness of sandwich construction cores
GOST 12204-1966 Holding devices. High legs. Design
GOST R 56739-2015 Polymer composites. Method for determination of water migration in sandwich construction cores
GOST R 56814-2015 Polymer composites. Ultrasonic testing of sandwich constructions face sheet and core material
GOST R 56798-2015 Polymer composites. Method for determination the mechanical characteristics of sandwich constructions flexural
GOST R 56811-2015 Polymer composites. Radiography of the outer layers and the material of the inner layer of the sandwich constructions
GOST R 56774-2015 Polymer composites. Determination of two-dimensional mechanical characteristics of bending sandwich constructions subjected to a distributed load
GOST R 58950-2020 Enclosing structures of buildings. Method for determining the period of polymer thermal insulation effective operation
GOST 10046-1972 High speed steel slotting. Types and basic dimensions
GOST 1414-1975 Constructional rolled steel of improved and high cutting machinability. Specifications
GOST 18220-1990 Key broaches for higher class roughness. Design
GOST R 70125-2022 Basic carrying structures for radioelectronic means. Classification
GOST 18875-1973 HSS chamfering turning tools. Design and dimensions
GOST 22354-1977 High strength nuts of product grade B. Construction and dimensions
GOST 10044-1973 High-speed steel boring tools with holders. Design and dimensions
GOST 21331-1975 High knurled-head screws. Construction and dimensions
GOST 22353-1977 High-strength bolts of product grade B. Construction and dimensions
GOST 14801-1985 Flat-head rivets (high precision). Construction and dimensions
GOST 21873-1978 Threaded pipeline connections. Stoppers. Construction

European Telecommunications Standards Institute (ETSI)

ETSI TS 101 733-2008 Electronic Signatures and Infrastructures (ESI); CMS Advanced Electronic Signatures (CAdES) V1.7.4
ETSI TS 101 733-2007 Electronic Signatures and Infrastructures (ESI); CMS Advanced Electronic Signatures (CAdES) V1.7.3
ETSI TS 101 733-2005 Electronic Signatures and Infrastructures (ESI); CMS Advanced Electronic Signatures (CAdES) V1.6.3
ETSI TS 101 733-2011 Electronic Signatures and Infrastructures (ESI); CMS Advanced Electronic Signatures (CAdES) V1.8.3
ETSI TS 101 903-2010 Electronic Signatures and Infrastructures (ESI); XML Advanced Electronic Signatures (XAdES) (V1.4.2; Includes Diskette)
ETSI TS 102 640-1-2008 Electronic Signatures and Infrastructures (ESI); Registered Electronic Mail (REM); Architecture, Formats and Policies; Part 1: Architecture V1.1.1
ETSI TS 102 734-2007 Electronic Signatures and Infrastructures; Profiles of CMS Advanced Electronic Signatures based on TS 101 733 (CAdES)
ETSI TR 102 923-2010 Electronic Signatures and Infrastructures (ESI); PDF Advanced Electronic Signatures (PAdES); Usage and implementation guidelines (V1.1.1)
ETSI TS 102 778-6-2010 Electronic Signatures and Infrastructures (ESI); PDF Advanced Electronic Signature Profiles; Part 6: Visual Representations of Electronic Signatures (V1.1.1)
ETSI TS 102 904-2007 Electronic Signatures and Infrastructures; Profiles of XML Advanced Electronic Signatures based on TS 101 903 (XAdES) (V1.1.1)
ETSI TS 102 640-1-2011 Electronic Signatures and Infrastructures (ESI); Registered Electronic Mail (REM); Part 1: Architecture (V2.2.1)
ETSI TS 102 640-1-2010 Electronic Signatures and Infrastructures (ESI); Registered Electronic Mail (REM); Part 1: Architecture V2.1.1
ETSI SR 003 232-2011 Electronic Signatures and Infrastructures (ESI); PDF Advanced Electronic Signature Profiles (PAdES); Printable Representations of Electronic Signatures (V1.1.1)
ETSI TS 102 778-1-2009 Electronic Signatures and Infrastructures (ESI); PDF Advanced Electronic Signature Profiles; Part 1: PAdES Overview - a framework document for PAdES (V1.1.1)
ETSI TS 102 778-4-2009 Electronic Signatures and Infrastructures (ESI); PDF Advanced Electronic Signature Profiles; Part 4: PAdES Long Term - PAdES-LTV Profile (V1.1.2)

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I SECTION 7-1996 Substructures
DIVISION I SEC 7-1996 Substructures (Interim 1997; Interim 2000)
HB-17 DIVISION I SEC 7-2002 Division I Design - Substructures ((Part A@ Part B@ and Part C))

CZ-CSN

CSN 22 3610-1978 Through dir cct boring cutters of high speed sleels wilh body square sect-liou.
CSN IEC 916:1993 Mechanical structures for electronic equipment. Terminology

Association Francaise de Normalisation

NF C96-314:1985 Microcircuits. Microwave. Couplers. General requirements.
NF C93-464-3-105*NF EN 60297-3-105:2009 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105 : dimensions and design aspects for 1U high chassis
NF EN 1337-4:2004 Appareils d'appui structuraux - Partie 4 : appareils d'appui à rouleau
NF L00-460-001*NF EN 4660-001:2011 Aerospace series - Modular and Open Avionics Architectures - Part 001 : architecture
NF EN 60297-3-105:2009 Mechanical structures for electronic equipment - Dimensions of 482.6 mm (19 in) series mechanical structures - Part 3-105: dimensions and design aspects for 1U height chassis
NF EN 50523-2:2009 Interfonctionnement des appareils électrodomestiques - Partie 2 : structures des données
NF EN 60297-3-101:2005 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-101: trays and associated plug-in blocks
NF EN 29519:1993 Construction navale et structures maritimes - Échelons pour marchepieds

Bureau of Indian Standards

IS 15962-2012 Structural Steels for Building and Structures with Improved Seismic Resistance
IS 6623-2004 High Strength Structural Nuts
IS 4247-3-1998 Code of practice for structural design of surface hydel power stations Part 3 Substructure
IS 1148-2009 Steel Rivet Bars (medium And High Tensile) For Structural Purposes For Structural Purposes
IS 2062-2011 Hot Rolled Medium and High Tensile Structural Steel
IS B6452-1989 High Alumina Cement For Structural Use(bi-lingual)
IS/IEC 60297-3-105-2008 Mechanical Structures for Electronic Equipment - Part 3 Dimensions of Mechanical Structures of the 482.6 mm (19 in) Series Section 105 Dimensions and Design Aspects for 1U High Chassis
IS/IEC 60297-3-101-2004 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482.6 mm 19 in series Part 3-101: Subracks and associated plug-in units
IS 11418-1-1986 High Level Data Link Control Procedures - Part I : Frame Structure

United States Navy

NAVY MIL-P-28766 (1)-1972 POLE, STRUCTURAL WOODEN, FOR HIGH FREQUENCY (HF)
NAVY MIL-P-28766-1971 POLE, STRUCTURAL WOODEN, FOR HIGH FREQUENCY (HF)
NAVY MIL-P-28766 NOTICE 1-1995 POLE, STRUCTURAL WOODEN, FOR HIGH FREQUENCY (HF)

American Society for Testing and Materials (ASTM)

ASTM A195-59 High-strength structural rivet steel
ASTM A94-62 Specification for High Strength Structural steel
ASTM A440-75 Specification for High-Strength Structural Steel
ASTM D3730-98 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
ASTM STP 498-1973 An Introduction to Today's Ultrahigh-Strength Structural Steels
ASTM STP 370-1965 Structure and properties of ultra-high strength steel

GCC Standardization Organization

GSO ISO 22156:2013 Bamboo -- Structural design
GSO ISO 630-4:2016 Structural steels -- Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
GSO ISO 16598:2021 Timber structures — Structural classification for sawn timber
GSO IEC 60297-3-108:2017 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units
GSO ISO 24314:2008 Structural steels - Structural steels for building with improved seismic resistance - Technical delivery conditions

International Organization for Standardization (ISO)

ISO 22156:2004 Bamboo - Structural design
ISO 22156:2021 Bamboo structures - Bamboo culms - Structural design
ISO 630-4:2012 Structural steels - Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
ISO 630-5:2023 Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
ISO 24314:2006 Structural steels - Structural steels for building with improved seismic resistance - Technical delivery conditions
ISO 16757-1:2015 Data structures for electronic product catalogues for building services - Part 1: Concepts, architecture and model
ISO 630-4:2021 Structural steels - Part 4: Technical delivery conditions for high yield strength quenched and tempered structural steel plates and wide flats
ISO 16598:2015 Timber structures - Structural classification for sawn timber
ISO/IEC 15045-4-1:2024 Information technology — Home Electronic System (HES) gateway — Part 4-1: Structure — Structural class and module requirements

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 22156:2013 Bamboo -- Structural design
OS GSO ISO 630-4:2016 Structural steels -- Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
OS GSO IEC 60297-3-108:2017 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units

GM North America

GM 9985471-2002 Adhesive Urethane, Two Part Structural, High Temperature
GM 9985481-1994 Adhesive Epoxy, 2 Part Structural, High Temperature

ESDU - Engineering Sciences Data Unit

ESDU 83009 C-2012 Damping of structures Part 1: tall buildings
ESDU 83009 C-1990 Damping of structures. Part 1: tall buildings.

IN-BIS

IS 4247 Pt.3-1978 Code of Practice for Structural Design of Surface Hydropower Stations Part III Substructure
IS 961-1975 Specification for Structural Steel (High Strength)
IS 6623-1985 Specification for high strength structural nuts
IS 9349-1986 Structural design suggestions for medium and high head sliding doors
IS 1149-1982 Specification for high strength steel rivets for structural use

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 1554.5:1995 Structural steel welding Part 5: Welding of steel structures subject to high levels of fatigue loading
AS/NZS 1554.5:2011 Structural steel welding, Part 5: Welding of steel structures subject to high levels of fatigue loading
AS/NZS 1554.5:2004 Structural steel welding - Welding of steel structures subject to high levels of fatigue loading
AS/NZS 1554.5:2014(R2015) Structural steel weldingWelding of steel structures subjected to high fatigue loads
AS/NZS 1554.5:2014/AMD 1:2015 Structural steel weldingWelding of steel structures subjected to high fatigue loads
AS/NZS 1554.5:2014 Structural steel weldingWelding of steel structures subjected to high fatigue loads
AS/NZS 3750.11:1996 Paints for steel structures - Chlorinated rubber - High-build and gloss
AS/NZS 4233.2:1999 High pressure water (hydro) jetting systems - Construction and performance
AS/NZS 3750.14:1997 Paints for steel structures - High-build epoxy (two-pack)
AS/NZS 3750.14:1997(R2013) Paints for steel structures - High-build epoxy (two-pack)
AS/NZS 4233.2:2013 High pressure water injection system structure and performance

German Institute for Standardization

DIN EN 60297-3-104:2007-03 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units (IEC 60297-3-104:2006); German version EN 60297-3-1...
DIN EN 1337-4:2004-08 Structural bearings - Part 4: Roller bearings; German version EN 1337-4:2004 / Note: To be replaced by DIN EN 1337-4 (2018-02).
DIN EN 1337-4 Berichtigung 1:2007-05 Structural bearings - Part 4: Roller bearings; German version EN 1337-4:2004, Corrigenda to DIN EN 1337-4:2004-08; German version EN 1337-4:2004/AC:2007 / Note: To be replaced by DIN EN 1337-4 (2018-02).
DIN EN 1337-4:2018 Structural bearings - Part 4: Roller bearings; German and English version prEN 1337-4:2018
DIN 41494 Beiblatt 1:1992 Mechanical structure Electronic equipment 19-inch modular structure
DIN EN 60297-3-105:2009-09 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis (IEC 60297-3-105:2008); German version EN 60297-3-105:2009
DIN EN 1337-4 E:1995-02 Structural bearings - Part 4: Roller bearings
DIN 41494-7:1987 Equipment practices for electronic equipment; mechanical structures of the 482,6 mm (19 inch) series; dimensions of cabinets and suites of racks
DIN EN 1337-4 E:2018 Draft Document - Structural bearings - Part 4: Roller bearings; German and English version prEN 1337-4:2018
DIN EN 1337-4 E:2018-02 Draft Document - Structural bearings - Part 4: Roller bearings; German and English version prEN 1337-4:2018
DIN 41494 Supplement 1:1992 Mechanical structures for electronic equipments; mechanical structures of the 482.6 mm series; guide for the application
DIN 3193:2018 Loft ladders - Special constructions for ceilings with a high thickness and for an increased maximum total load
DIN ISO 16757-1 E:2014-04 Data structures for electronic product catalogues for building services - Part 1: Concepts, architecture and model
DIN 41494 Bb.1:1992 Mechanical structures for electronic equipments; mechanical structures of the 482,6 mm series; guide for the application
DIN EN 10025-6 A1 E:2022-04 Hot rolled structural steel products Part 6: Technical delivery conditions for high yield strength structural steels after cold working
DIN 3193:2017 Loft ladders - Special constructions for ceilings with a high thickness and for an increased maximum total load
DIN 3193:2018-03 Loft ladders - Special constructions for ceilings with a high thickness and for an increased maximum total load
DIN 18800-5:2007 Steel structures - Part 5: Composite structures of steel and concrete - Design and construction
DIN 1050:1968 Calculation and structural design of steel structures in high-rise buildings
DIN 18800-5 E:1999-01 Steel structures - Part 5: Composite structures of steel and concrete - Design and construction

Standards Norway

NS 12501:1985 High strength structural steels — Summary
NS-EN 1337-4:2004 Structural bearings — Part 4: Roller bearings
NS 12569:1985 High strength structural steels — Grade E 690
NS 12536:1985 High strength structural steels — Grade E 355
NS 12542:1985 High strength structural steel — Grade E 420
NS 12555:1985 High strength structural steels — Grade E 550
NS 12546:1985 High strength structural steels — Grade E 460
NS 12502:1985 High strength structural steels — Technical delivery requirements

Spanish Association for Standardization (UNE)

UNE-EN 60297-3-104:2006 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-104: Connector dependent interface dimensions of subracks and plug-in units (IEC 60297-3-104:2006 ) (Endorsed by AENOR in Sept...
UNE-EN 60297-3-106:2010 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1 ...
UNE-EN 1337-4:2005/AC:2007 Structural bearings - Part 4: Roller bearings
UNE-EN 1337-4:2005 Structural bearings - Part 4: Roller bearings
UNE-EN 60297-3-105:2009 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-105: Dimensions and design aspects for 1U high chassis (Endorsed by AENOR in March of 2009.)
UNE-EN IEC 60297-3-110:2018 Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racks and cabinets for smart houses (Endorsed by Asociación Española de Normalización in De...
UNE-EN 60297-3-101:2004 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-101: Subracks and associated plug-in units (Endorsed by AENOR in November of 2004.)

Society of Automotive Engineers (SAE)

SAE J368-1988 HIGH STRENGTH, QUENCHED, AND TEMPERED STRUCTURAL STEELS
SAE AMS3940H-1993 Fiberboard, Hard-Pressed, Structural
SAE J368-1993 HIGH STRENGTH, QUENCHED, AND TEMPERED STRUCTURAL STEELS
SAE J368-1968 High Strength@ Quenched@ and Tempered Structural Steels
SAE AMS3695-1983 Adhesive Film, Epoxy-Base for High Durability Structural Adhesive Bonding
SAE J368_199303 High-Strength, Quenched, and Tempered Structural Steels
SAE J368_198812 High-Strength, Quenched, and Tempered Structural Steels

IFI/FASTNR - Industrial Fastener Institute

SECT E- Section E - High Strength Structural Bolting
MET CO- Commentary on High Strength Structural Bolting
COMME- Commentary on High Strength Structural Bolting

Japanese Industrial Standards Committee (JISC)

JIS G 3129:2024 High tensile strength steels for tower structure
JIS G 3129:2018 High tensile strength steels for tower structure
JIS G 3129:1995 High tensile strength steel for tower structural purposes
JIS G 3129:2005 High tensile strength steel for tower structural purposes
JIS G 3474:1995 High tensile strength steel tubes for tower structural purposes
JIS G 3128:2021 High yield strength steel plates for welded structure
JIS G 3128:2009 High yield strength steel plates for welded structure
JIS G 3128:1999 High yield strength steel plates for welded structure
JIS G 7101:2000 Structural steels with improved atmospheric corrosion resistance

South African Bureau of Standard

SANS 1244:1979 Tubular steel framed chairs and stools

Korean Agency for Technology and Standards (KATS)

KS D 3781-2014 High tensile strength steel for tower structural purposes
KS D 3781-2016 High tensile strength steel for tower structural purposes
KS D 3781-1997 High tensile strength steel for tower structural purposes
KS D 3780-2006 High tensile strength steel tubes for tower structural purposes
KS D 3781-2021 High tensile strength steel for tower structural purposes
KS D 3780-2013 High tensile strength steel tubes for tower structural purposes
KS D 5994-2023 High-performance rolled steel for building structures
KS D 5994-2018(2023) High-performance rolled steel for building structures
KS D ISO 24314:2007 Structural steels-Structural steels for building with improved seismic resistance-Technical delivery conditions
KS D 3777-2023 High tensile strength steel tubes for tower structural purposes
KS D 3777-2018 High tensile strength steel tubes for tower structural purposes
KS D 5994-2018 High-performance rolled steel for building structures
KS D 3777-2018(2023) High tensile strength steel tubes for tower structural purposes
KS D 5994-2016 High-performance rolled steel for building structures
KS D 4102-1995(2010) High tensile strength carbon steel castings and low alloy steel castings for structural purposes
KS D 3781-2016(2021) High tensile strength steel for tower structural purposes
KS D 3780-2006(2011) High tensile strength steel tubes for tower structural purposes
KS X 6722-2-2023 Electronic catalog－Part 2：Structure of product identification code
KS X 6722-2-2003(2023) Electronic catalog－Part 2：Structure of product identification code
KS D ISO 24314-2007(2012) Structural steels－Structural steels for building with improved seismic resistance－Technical delivery conditions
KS F 1554-2021 Standard terminology related to wood —Nail and fasteners for wood structure
KS D 3611-2021 High yield strength steel plates for welded structure
KS D 3611-1986 High yield strength steel plates for welded structure
KS D 3611-2016(2021) High yield strength steel plates for welded structure
KS D 3611-2016 High yield strength steel plates for welded structure
KS D ISO 4996-2009 Hot-rolled steel sheet of high yield stress structural quality

ABS - American Bureau of Shipping

ABS 113 CORR-2014 GUIDANCE NOTES ON STRUCTURAL DIRECT ANALYSIS FOR HIGH-SPEED CRAFT
ABS 113-2011 GUIDANCE NOTES ON STRUCTURAL DIRECT ANALYSIS FOR HIGH-SPEED CRAFT

Ente Nazionale Italiano di Unificazione

UNI EN 1337-4:2004 Structural bearings - Part 4: Roller bearings
EC 1-2007 UNI EN 1337-4:2004 Structural bearings - Part 4: Roller bearings

Swedish Institute for Standards

SS-EN 1337-4:2004 Structural bearings - Part 4: Roller bearings
SS-EN 60297-3-103:2004 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-103: Keying and alignment pin

Danish Standards Foundation

DANSK DS/EN 1337-4/AC:2007 Structural bearings - Part 4: Roller bearings
DANSK DS/EN 1337-4:2004 Structural bearings - Part 4: Roller bearings
DS/EN 1337-4:2004 Structural bearings - Part 4: Roller bearings
DS/EN 1337-4/AC:2007 Structural bearings - Part 4: Roller bearings
DANSK DS/EN 60297-3-105:2009 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis
DS/EN 60297-3-105:2009 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis
DANSK DS/EN 60297-3-108:2015 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units
DANSK DS/EN 60297-3-101:2004 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units

CEN - European Committee for Standardization

PREN 1337-4-2018 Structural bearings - Part 4: Roller bearings
EN ISO 16757-1:2019 Data structures for electronic product catalogues for building services - Part 1: Concepts@ architecture and model

Lithuanian Standards Office

LST EN 1337-4-2004/AC-2007 Structural bearings - Part 4: Roller bearings
LST EN 1337-4-2004 Structural bearings - Part 4: Roller bearings
LST EN 60297-3-105-2009 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis (IEC 60297-3-105:2008)

British Standards Institution (BSI)

BS EN 1337-4:2004(2007) Structural bearings — Part 4 : Roller bearings
BS EN 60297-3-105:2009 Mechanical structures for electronic equipment — Dimensions of mechanical structures of the 482,6 mm (19 in) series — Part 3-105: Dimensions and design aspects for 1U high chassis
BS 5954-2:1985 Dimensions of mechanical structures of the 482.6 mm (19 in) series - Specification for cabinets and pitches of rack structures
20/30367133 DC BS ISO 22156. Bamboo. Structural design
DD ENV 1729-1-2001 Furniture. Chairs and tables for educational institutions. Functional dimensions
20/30381897 DC BS ISO 630-4. Structural steels. Part 4. Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
BS EN 60297-3-101:2004(2008) Mechanical structures for electronic equipment — Dimensions of mechanical structures of the 482,6 mm (19 in) series — Part 3 - 101 : Subracks and associated plug - in units
18/30365848 DC BS EN 1337-4. Structural bearings - Part 4: Roller bearings
BS CWA 16367:2011 Implementing e-competence framework into SMEs
BS 7728:1994 Mechanical structures for electronic equipment. Terminology

International Electrotechnical Commission (IEC)

IEC 60297-3-105:2008 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis
IEC 60916:1988 Mechanical structures for electronic equipment - Terminology

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 630-4:2017 Structural steels -- Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
BH GSO ISO 16598:2022 Timber structures — Structural classification for sawn timber
BH GSO ISO 4996:2024 Hot-rolled steel sheet of high yield stress structural quality
BH GSO IEC 60297-3-101:2016 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units

National Fire Protection Association (NFPA)

NFPA 101H CHAPTER 11-2006 Special Structures and High-Rise Buildings
NFPA FPH SECTION 13-2-2003 Occupancies in Special Structures and High-Rise Buildings

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS)

MSS SP-68-1997 High Pressure Butterfly Valves with Offset Design
MSS SP-68-2011 High Pressure Butterfly Valves with Offset Design

Standard Association of Australia （SAA）

AS 1511:1984 Use of high-strength bolts in steel structures (known as the SAA High-strength Structural Bolting Code)
AS 1554.5:1989 Structural steel welding (known as the SAA Structural Steel Welding Code) - Welding of steel structures subject to high levels of fatigue loading
AS 4233.2:2013/Amdt 1:2020 High pressure water jetting systems, Part 2: Construction and performance
AS 4233.2:2013 High pressure water jetting systems, Part 2: Construction and performance
AS 4233.2:2013(R2020) High pressure water jetting systems, Part 2: Construction and performance
AS A151:1966 Structural Steel of High Yield Stress (Welding Quality)
AS 4260:1997 High efficiency particulate air (HEPA) filters - Classification, construction and performance
AS 1511:1973 Use of high-strength bolts in steel structures (metric units) (known as the SAA high-strength structural bolting code (metric)
AS 2672:1983 Paints for steel structures - Chlorinated rubber, high build

FI-SFS

SFS 5380-1988 Pipe rack. Pipe hanger. structure
SFS 2663-1975 Structural testing of high voltage connectors

RO-ASRO

STAS 1513-1980 Steel ropes ROPES, SIMPLE CONSTRUCTION
STAS 808/3-1985 PRIMARY BATTERIES Terminals Construction and dimensions
STAS 808/3-1978 PRIMARY BATTERY terminals Construction and dimensions

European Committee for Electrotechnical Standardization（CENELEC）

EN 60297-3-105:2009 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1096-1988 Multiplexed high-performance bus structure; VSB
IEEE Std C37.04/COR-2005 Errata to IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers
IEEE C37.04 INT 1-2010 Rating Structure for AC High-Voltage Circuit Breakers

Magyar Szabványügyi Testület

MSZ 7943/6-1979 Metal cover with stone structure
MSZ KGST 2736-1980 The highest point display structure of the power consumption meter

IET - Institution of Engineering and Technology

ADV ELECTRO ANALY PASS ACTV PLANAR STRUCT-1999 Advanced Electromagnetic Analysis of Passive and Active Planar Structures

Military Standards (MIL-STD)

MIL MIL-P-28766-1971 POLE, STRUCTURAL WOODEN, FOR HIGH FREQUENCY (HF) ANTENNAS

PL-PKN

PN C89425-1992 Plastics. Determination of melting temperature of semi-crystalline polymers

American Society of Mechanical Engineers (ASME)

ASME S0003G ADDENDA-2002 Section III: Division 1 Subdivision NG - Core Support Structures
ASME S0003G-2001 Section III: Division 1 Subdivision NG - Core Support Structures
ASME S0003G ADDENDA-2001 Section III: Division 1 Subdivision NG - Core Support Structures

Association of German Mechanical Engineers

DVS 1702-1999 Steel structure process test for welded joints of high-strength weldable fine-grained structural steel
VDI/VDE/GESA 2635 Blatt 2-2001 Experimentelle Strukturanalyse - Empfehlungen zur Durchfuehrung von Dehnungsmessungen bei hohen Temperaturen
VDI/VDE/GESA 2635 Blatt 2-2004 Experimental structural analysis - Recommended practice for high-temperature strain measurements

European Committee for Standardization (CEN)

EN 4660-001:2011 Aerospace series - Modular and Open Avionics Architectures - Part 001: Architecture
prEN 50090-1-1990 Home electronic system, HES; part 1: standardization structure

ACI - American Concrete Institute

ACI SP-218-2004 High-Performance Structural Lightweight Concrete (Out of Print)

American National Standards Institute （ANSI)

ANSI/SAE J368-1993 High Strength, Quenched, and Tempered Structural Steels

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 999-1981 Nondestructive Inspection of Advanced Composite Structures