Polymer detection
Polymer detection, Total:36 items.
The international standard classification for "Polymer detection" includes: Transfusion, infusion and injection equipment , Protection against dangerous goods , Non-destructive testing , Testing (Vocabularies) , Occupational safety. Industrial hygiene .
The Chinese standard classification for "Polymer detection" includes: Medical sanitary products , Marking, packaging, transport and storage in general , Basic standards and general methods , Safety control technology .
Group Standards of the People's Republic of China
- T/YNSX 9-2020 High Molecular Weight High Density Polyethylene (HMWHDPE) Inspection Well
- T/YNSX 009-2022 High Molecular Weight High Density Polyethylene (HMWHDPE) Inspection Well
- T/CHIA 7.6-2018 Basic data set of hypertension department electronic medical record – part 6：Hypertension laboratory test record
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 12604.8-1995 Terminology for nondestructive testing - Neutron testing
- GB/T 12604.8-2014 Non-destructive Testing - Terminology - Terms Used in Neutron Testing
- GB/T 21864-2008 Standard test method for molecular weight averages and molecular weight distribution of polystyrene by high performance size-exclusion chromatography
- GB/T 15812-1995 Flexible polymeric tubes for medical use-Physical perfomence test method
- GB/T 18851.5-2014 Non-destructive testing―Penetrant testing―Part 5: Penetrant testing at temperatures higher than 50 ℃
国家市场监督管理总局、中国国家标准化管理委员会
- GB/T 38944-2020 Non-destructive testing—Testing method of small-angle neutron scattering
Professional Standard - Commodity Inspection
- SN/T 3703.2-2013 Rules for the inspection of HV electrical apparatus for export and import - Part 2: HV insulators
- SN/T 2274-2009 Rules for the inspection of food contact materials - Polymer materilas
- SN/T 2274-2015 Rules for inspection of food contact materials―Polymer materials
Professional Standard - Labor and Labor Safety
- LD 82-1995 Rules of inspect for classification of works in heat environment
Taiwan Provincial Standard of the People's Republic of China
- CNS 10144-1983 Method of Test for Synthetic Polymer Roofing Sheets for Waterproof
Professional Standard - Electricity
- DL/T 2453-2021 Detecting specification for zero-value cap and pin porcelain insulator by applying impulse high voltage
Sichuan Provincial Standard of the People's Republic of China
- DB51/T 2004-2015 Ion Chromatography for Detection of Sulfate in High Purity Sodium Hydroxide
RU-GOST R
- GOST R 56787-2015 Polymer composites. Nondestructive testing
- GOST R 56814-2015 Polymer composites. Ultrasonic testing of sandwich constructions face sheet and core material
- GOST 8.224-1976 State system for ensuring the uniformity of measurements. High-pressure-air ganging instuments of flowmeter type. Methods and means of verification
SCC
- AWWA QTC97118 Molecular Techniques for Measuring Infectivity and Improving Detection of Waterborne Cryptosporidium
- AWWA WQTC69414 Molecular Testing of Water Samples: New Sample Preparation and Analytical Techniques for Improving Water Monitoring Efficacy
- AWWA JAW49902 Journal AWWA — Using Ion Chromatography to Detect Perchlorate
- DANSK DS/EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C
- AWWA WQTC65960 Fluoride Testing Method: Improving Ion Chromatography Accuracy
Japanese Industrial Standards Committee (JISC)
- JIS K 0556:1995 Testing methods for determination of anions in highly purified water
- JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
HU-MSZT
- MNOSZ 5965-1956 Chemical molecular analysis and detection
- MSZ 6354/2-1982 Grain seed detection mode. Seed purity testing
- MSZ 8880/3-1974 Electronic equipment testing tools and testing methods. hammer
GSO
- BH GSO ISO 3452-5:2016 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degrees C
- OS GSO ISO 3452-5:2013 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degrees C
KR-KS
- KS B ISO 3452-5-2022 Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 ℃
Korean Agency for Technology and Standards (KATS)
- KS B ISO 3452-5:2022 Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 ℃
German Institute for Standardization
- DIN EN ISO 3452-5:2009-04 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C (ISO 3452-5:2008); German version EN ISO 3452-5:2008
Danish Standards Foundation
- DS/EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C
Standard Association of Australia （SAA）
- AS ISO 3452.5:2020 Non-destructive testing — Penetrant testing, Part 5: Penetrant testing at temperatures higher than 50 °C
Polymer,Polymer detection,Polymer Material Testing,Polymer Material Testing,Polymer Material Testing,Polymer detection,Polymer hose,polymer film,polymer temperature,Polymer instrument,Polymer structure detection,Polymer Material Testing Center,How to detect polymer materials,Polymer material detection method,Polymer gas phase detection,Polymer detection method,Detection methods of polymer materials,Polymer material detection method,High Molecular Weight Detection
