Standard curve value

Standard curve value, Total:142 items.

The international standard classification for "Standard curve value" includes: Products of the chemical industry in general , Geology. Meteorology. Hydrology .

The Chinese standard classification for "Standard curve value" includes: Basic standards and general methods for dye , Electromagnetic Measurement , Meteorology .

National Metrological Technical Specifications of the People's Republic of China

JJF 1735-2018 Calibration Specification for High Frequency Q Value Standard Coil Sets

工业和信息化部/国家能源局

JB/T 13051-2017 High-power diesel engines-Limits of crankshaft cleanliness and detection methods

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23976.2-2009 Dyes—Determination of dyeing rate curve—Method for determination of Integ

National Metrological Verification Regulations of the People's Republic of China

JJG 493-1987 Audion Magnetic Properties of Standard Specimen of Soft Magnetic Materials (A-C Magnetization Curne and Amp;itude Permeability)

Professional Standard - Nuclear Industry

EJ/T 918-1994 Guidelines for the formulation of pressure-temperature limit curves for reactor pressure vessels in pressurized water reactor nuclear power plants

国家能源局

NB/T 20439-2017 EvaLuatiaa rule of pressure-temperaturel limit curves for reactor pressure vessel of pressurized water reactor nuclear power plants

Taiwan Provincial Standard of the People's Republic of China

CNS 8461-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown One - Sided)
CNS 8459-1983 Significance Test of Difference Between the Population Mean and the Standart (Standard Deviation Known ,One - Sided)
CNS 8460-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Known, Two - Sided)
CNS 8462-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown ,Two -Sided)

Hebei Provincial Standard of the People's Republic of China

DB13/T 5387-2021 Technical Guidelines for Revision and Measurement of Reservoir Capacity Curve and Review and Correction of Eigenvalues

Professional Standard - Ferrous Metallurgy

YB/T 081-1996 Rule for rounding off of numberical values and judgement of testing values for technical standards of metallurgy
YB/T 081-2013 Rule for Rounding Off of Numberical Values and Judgement of Testing Values for Technical Standards of Metallurgy

Group Standards of the People's Republic of China

T/CA 002-2017 Thinking Value Cloud Computing Evaluation Criteria
T/CAAAD 003-2019 Evaluation Standards of Sports Marketing Value
T/CAAAD 001-2019 Digital Media Valuation Criteria
T/CMA YJ070-2024 Calibration Method for On-line Combustion Calorimeter
T/CAAAD 004-2019 Self-media marketing value evaluation standard

Professional Standard - Recommended Standards for Engineering Construction

CECS 53-1993 Standard for Maximum Alkali Content in Concrete

冶金工业部

YB/T 0081-1996 Numerical rounding of metallurgical technical standards and determination principles of testing values

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34412-2017 Statistical method for surface standard climate normals

Association Francaise de Normalisation

NF T12-018:1987 Pulps. Determination of kappa number.
NF C00-232*NF EN 60059:1999 IEC standard current ratings
NF E22-301*NF ISO 582:1996 Rolling bearings. Chamfer dimensions. Maximum values.
NF E04-551:1995 Technical drawings. Tolerancing of linear and angular dimensions.
NF T75-122:1982 ESSENTIAL OILS. OILS OF CITRUS. DETERMINATION OF CD VALUE BY ULTRAVIOLET SPECTROPHOTOMETRIC ANALYSIS.

American Society for Testing and Materials (ASTM)

ASTM G75-07 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM G75-95 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM G75-01 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM D656-87(1999) Standard test method for online pH measurement
ASTM D6569-05(2009) Standard Test Method for On-Line Measurement of pH ¹
ASTM D6569-14 Standard Test Method for On-Line Measurement of pH
ASTM D6569-23 Standard Test Method for On-Line Measurement of pH
ASTM D5468-02 Standard Test Method for Gross Calorific and Ash Value of Waste Materials
ASTM E1891-21 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM D6543-00(2012) Standard Guide to the Evaluation of Measurements Made by On-Line Coal Analyzers
ASTM E1891-10a Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM RR-F01-1004 1985 F0617-Standard Test Method for Measuring MOSFET Linear Threshold Voltage
ASTM E1891-97 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1891-10 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM D1386-15(2022) Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
ASTM E1891-97(2002) Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM D1387-89(1995)e1 Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
ASTM D1387-84 Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
ASTM D1387-89(2019) Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
ASTM D1293-99 Standard Test Methods for pH of Water
ASTM D5128-14 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D1293-99(2005) Standard Test Methods for pH of Water
ASTM D1293-84(1990) Standard Test Methods for pH of Water
ASTM D1293-12 Standard Test Methods for pH of Water
ASTM A794/A794M-24 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
ASTM D7164-21 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM D2885-08 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D2885-21 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D2885-95(1999) Standard Test Method for Research and Motor Method Octane Ratings Using On-Line Analyzers
ASTM D2885-09 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D1512-95(2000) Standard Test Methods for Carbon Black-pH Value
ASTM D1512-21 Standard Test Methods for Carbon Black—pH Value
ASTM D1512-15b Standard Test Methods for Carbon Black&x2014pH Value
ASTM D1512-15a Standard Test Methods for Carbon Black&x2014pH Value
ASTM D2810-72(1996) Standard Test Method for pH of Leather
ASTM D4972-01 Standard Test Method for pH of Soils
ASTM D2810-18 Standard Test Method for pH of Leather
ASTM D2810-01 Standard Test Method for pH of Leather
ASTM D1512-15b(2020) Standard Test Method for Carbon Black pH
ASTM D4972-19(2024)e1 Standard Test Methods for pH of Soils
ASTM D6739-11(2015) Standard Test Method for Silica&x2014pH Value
ASTM D4972-18 Standard Test Methods for pH of Soils
ASTM D1512-23 Standard Test Methods for Carbon Black—pH Value
ASTM D1512-05 Standard Test Methods for Carbon Black-pH Value
ASTM D1512-05(2012) Standard Test Methods for Carbon Blackmdash;pH Value
ASTM D1293-18 Standard Test Methods for pH of Water
ASTM D6739-01 Standard Test Method for Silica8212;pH Value
ASTM D4972-13 Standard Test Method for pH of Soils
ASTM D1512-15 Standard Test Methods for Carbon Black—pH Value
ASTM D4972-19 Standard Test Methods for pH of Soils
ASTM D4972-01(2007) Standard Test Method for pH of Soils

HU-MSZT

MI 11290/4-1980 Characteristic curve of value added of copper and nickel elements

FI-SFS

SFS 2964-1974 Standard data. Basic value. The exact value. perfect value

SCC

BHMA A156.21-2019 Standard For Thresholds
CEI EN 60059:2000 IEC standard current ratings
DANSK DS/EN 60059:2000 IEC standard current ratings
BS EN 60059:1999 IEC standard current ratings
BS 240:1926 Standard tables of Brinell hardness numbers
CISPR 9:1967 CISPR limits of radio interference and report of national limits
CISPR 9:1966 CISPR limits of radio interference and report of national limits

Danish Standards Foundation

DS/ISO 226:1991 Acoustics. Normal equal-loudness level contours
DS/ISO 406:1990 Technical drawings. Tolerancing of linear and angular dimensions

VE-FONDONORMA

NORVEN 1-1-1960 numerical standards
NORVEN 21 Standards for normalizing numerical values
COVENIN 748-1974 Standard values for capacitors and resistors

RO-ASRO

STAS 8619/2-1990 Ph-measurement. Standard ph buffer solutions

Japanese Industrial Standards Committee (JISC)

JIS Z 9045:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, two-sided)
JIS Z 9043:1962 Significance test of difference between the population mean and the standard (standard deviation known, two-sided)
JIS Z 9044:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, one-sided)
JIS Z 9042:1962 Significance test of difference between the population mean and the standard (standard deviation known, one-sided)
JIS Z 8318:1998 Technical drawings -- Tolerancing of linear and angular dimensions

German Institute for Standardization

DIN 40200:1981-10 Nominal value, limiting value, rated value, rating - concepts
DIN EN 60059:2010 IEC standard current ratings (IEC 60059:1999 + A1:2009); German version EN 60059:1999 + A1:2009
DIN 19266:2000 pH measurement - Referenz buffer solutions for the calibration of pH measuring equipment
DIN 19266:2015 pH measurement - Reference buffer solutions for the calibration of pH measuring equipment

YU-JUS

JUS U.J6.151-1982 Standard values for sound isolation criterion

KR-KS

KS C IEC 60059-2016 Standard current ratings
KS F 2103-2013(2023) Standard test method for pH of soils

American National Standards Institute （ANSI)

ANSI/IEEE 620:1997 Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
ASME TGP-1-2023 Guidelines to ASME Standards in Hydrogen Value Chains
ANSI/IEEE 661:1979 Standard Method for Determining Objective Loudness Ratings of Telephone Connections
ANSI/FCI 69-1-1989 Pressure Rating Standard for Steam Traps

Korean Agency for Technology and Standards (KATS)

KS C IEC 60059-2016(2021) Standard current ratings
KS A 3252-1985 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS A 3252-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS C IEC 60059:2004 IEC Standard current ratings
KS C IEC 60059:2014 Standard current ratings
KS C IEC 60059:2016 Standard current ratings
KS A 3262-1986 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS A 3262-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS A 3263-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEIVATIONS UNKNOWN)
KS F 2103-2013(2018) Standard test method for pH of soils

RU-GOST R

GOST R 54261-2010 Resources saving. Waste management and energy production. Standard test method for gross calorific and ash value of waste materials

International Electrotechnical Commission (IEC)

IEC 60059:1999+AMD1:2009 CSV IEC standard current ratings
IEC 60059:2009 IEC standard current ratings
IEC 60059:1999/AMD1:2009 IEC standard current ratings
IEC 60059:1938 IEC standard current ratings
IEC 60059:1999 IEC standard current ratings

Spanish Association for Standardization (UNE)

UNE-EN 60059:2000 IEC standard current ratings.
UNE-EN 60059:2001 ERRATUM IEC standard current ratings.

International Organization for Standardization (ISO)

ISO 406:1987 Technical drawings; Tolerancing of linear and angular dimensions

VN-TCVN

TCVN 7655-2007 IEC standard current ratings

CH-SNV

VSM 13792-1969 Standard number system and standard scale values 0.1 to 1
SN 212 202-1978 Standard number system and standard scale values 10 to 100
VSM 10852.1-1943 Standard number system and standard scale values 1 to 10
SNV 95841-1950 Standard number system and standard scale values 100 to 1000

BE-NBN

NBN 46-1967 Standard voltages, Standard current ratings and Standard frequencies

British Standards Institution (BSI)

BS 1647-2:1984 pH measurement - Specification for reference value standard solutions and operational reference standard solutions
BS CWA 15896-1:2008 Value added purchasing management - General criteria