electrolyte material

electrolyte material, Total:93 items.

The international standard classification for "electrolyte material" includes: Fuel cells , Galvanic cells and batteries in general , Other insulating materials , Primary cells and batteries , Plastics in general , Pigments and extenders , Laboratory medicine .

The Chinese standard classification for "electrolyte material" includes: Electrochemical power source , Electrical insulating material and its products , Basic standards and general methods for synthetic resin and plastic , Special electronic technology material , Basic standards and general methods for dye , Medical laboratory equipment .

Group Standards of the People's Republic of China

T/CNFIA 204-2024 Electrolyte beverages (drinks)
T/YNBX 096-2023 Aluminum electrolysis overhaul slag regenerated carbon material
T/CBIA 012-2024 Electrolyte beverages
T/CEEIA 722-2023 Composite materials used for electrical insulation—Identification of polymer—Pyrolytic gas—chromatographic method using mass—spectrometric detection

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 28817-2022 Single cell test methods for polymer electrolyte fuel cell (PEFC)
GB/T 46314-2025 Primary battery material terminology
GB/T 17520-1998 Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
GB/T 28817-2012 Single cell test methods for polymer electrolyte fuel cell (PEFC)
GB/T 10582-2008 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials-test methods
GB/T 5596-1996 Ceramic dielectric materials used for capacitors
GB/T 43289-2023 Plastics—Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions

Taiwan Provincial Standard of the People's Republic of China

CNS 4858-1998 Fixed tantalum capacitors for use in electronic equipment (non-solid or solid electrolyte)
CNS 4856-1998 Fixed capacitors of aluminium electrolytic for use in electronic equipment (solid and non-solid electrolyte)

Professional Standard - Non-ferrous Metal

YS/T 1420-2021 Specifications for resource utilization of aluminum electrolytic waste refractory materials

Professional Standard - Medicine

YY/T 0589-2005 Electrolyte analyzer
YY/T 0589-2016 Electrolyte analyzer

National Metrological Verification Regulations of the People's Republic of China

JJG 1051-2021 Electrolyte Analyzers

National Association of Corrosion Engineers (NACE)

NACE Paper 13297-2019 Evaluation of corrosion behavior of candidate materials resistant to alkaline aqueous electrolytes

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO 2522:2017 Sports Drinks (Electrolyte Drinks)
BH GSO IEC 60426:2016 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods

The Directorate General of Specifications and Metrology (DGSM)

OS GSO 2522:2016 Sports Drinks (Electrolyte Drinks)

GCC Standardization Organization

GSO 2522:2016 Sports Drinks (Electrolyte Drinks)
GSO IEC 60426:2013 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods

Instituto Uruguayo de Normas Técnicas

UNIT 416-1975 Method for measuring the dissolved color of tannins in vegetable tannin materials

Korean Agency for Technology and Standards (KATS)

KS C 8569-2015 Polymer electrolyte fuel cell(PEFC) system
KS C IEC 62282-7-1:2013 FUEL CELL TECHNOLOGIES – Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
KS C IEC 60426-2023 Test methods for determining electrolytic corrosion with insulating materials
KS C IEC 60426-2008(2018) Test methods for determining electrolytic corrosion with insulating materials

Defense Logistics Agency

DLA DSCC-DWG-06015 REV A-2006 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM
DLA DSCC-DWG-06016 REV A-2006 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM
DLA DSCC-DWG-06013 REV A-2006 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM
DLA DSCC-DWG-06014 REV A-2006 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM
DLA MIL-C-62 E SUPP 1-2004 CAPACITORS, FIXED, ELECTROLYTIC (DC, ALUMINIM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR
DLA MIL-C-62 E-2004 CAPACITORS, FIXED, ELECTROLYTIC (DC, ALUMINIM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR

Comitato Elettrotecnico Italiano

CEI EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods

Swedish Institute for Standards

SS-EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
SIS SS IEC 426:1982 Test methods for determining electrolytic corrosion with insulating materials

Association Francaise de Normalisation

NF EN 61234-1:1994 Test method for hydrolytic stability of electrical insulating materials - Part 1: plastic films
NF C26-260*NF EN 60426:2016 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
NF EN 60426:2016 Electrical insulating materials - Determination of electrolytic corrosion in the presence of insulating materials - Test methods

British Standards Institution (BSI)

BS EN 61234-1:1994 Method of test for hydrolytic stability of electrical insulating materials. Method of test for hydrolytic stability of electrical insulating materials. Plastic films
BS EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insuating materials - Test methods
BS 5735:1979 Test methods for determining electrolytic corrosion with electrical insulating materials
BS EN 61234-2:1998 Method of test for hydrolytic stability of electrical insulating materials. Moulded thermosets
BS EN 62877-1:2016 Electrolyte and water for vented lead acid accumulators. Requirements for electrolyte
BS 5626-3.4:1980 Cellulosic papers for electrical purposes. Specifications for individual materials. Electrolytic capacitor paper
BS ISO 23832:2021 Plastics. Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions

International Electrotechnical Commission (IEC)

IEC 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
QC 300301/ SE 0001-1989 Aluminium Electrolytic Capacitors with Non-Solid Electrolyte

Danish Standards Foundation

DANSK DS/EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
DS/EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
DS/ISO 23832:2021 Plastics – Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions

German Institute for Standardization

DIN EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods (IEC 60426:2007); German version EN 60426:2007
DIN 51921:1998 Testing of carbon materials - Determination of content of matter insoluble in quinoline - Binding and impregnating materials
DIN 51921 E:2013-10 Testing of carbon materials - Determination of content of matter insoluble in quinoline - Binding and impregnating materials
DIN EN ISO 22553-13:2022 Coating materials – Electrophoretic coatings – Part 13: Determination of redissolution behavior
DIN 43530-2 Accumulators; electrolyte and refilling water; electrolyte for lead acid batteries
DIN 51911 E:2020-06 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN EN 61234-1:1994-08*VDE 0349-1:1994-08 Method of test for the hydrolytic stability of electrical insulating materials
DIN EN 61234-2:1998-10*VDE 0349-2:1998-10 Electrical insulating materials - Method of test for the hydrolytic stability
DIN 51911:2020-12 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN 43530-2:1987 Accumulators; electrolyte and refilling water; electrolyte for lead acid batteries
DIN 51919:1999 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method; solid materials
DIN 53489:1968 Testing of Electrical Insulating Materials; Asessing the Effect of Electrolytic Corrosion
DIN 53489:1968-01 Testing of Electrical Insulating Materials; Asessing the Effect of Electrolytic Corrosion

European Committee for Electrotechnical Standardization（CENELEC）

EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods

Bureau of Indian Standards

IS 8516-2011 Electrical Insulating Materials —— Determination Of Electrolytic Corrosion Caused By Insulating Materials —— Test Methods
IS 8516-1977 Test methods for determination of electrolytic corrosion of insulating materials
IS 4317-1983 Specification for non-solid electrolytic aluminum electrolytic capacitors

European Committee for Standardization (CEN)

EN ISO 18256-2:2021 Nuclear fuel technology - Dissolution of plutonium dioxide-containing materials - Part 2: Dissolution of MOX pellets and powders (ISO 18256-2:2019)

International Organization for Standardization (ISO)

ISO 18256-2:2019 Nuclear fuel technology — Dissolution of plutonium dioxide-containing materials — Part 2: Dissolution of MOX pellets and powders
ISO 23832:2021 Plastics - Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions

Standard Association of Australia （SAA）

AS 1406:2004 Electroplated coatings - Nickel and chromium on plastics for decorative applications
AS 1406:2004(R2017) Electroplated coatings - Nickel and chromium on plastics for decorative applications
AS 3532:1988 Test methods for determining electrolytic corrosion with insulating materials

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.6.17-1982 Hydrolytic Stability, Flexible Printed Wiring Material

Ente Nazionale Italiano di Unificazione

UNI 6161-1968 Chemical and electrochemical treatments on surfaces. Nickel on ferrous materials. Chromium electrolyte covering, replaces uni 4523
UNI 4240-1959 Surface treatment of metal materials. Porosity test of electrolytic coating of iron-containing materials
UNI 6160-1968 Chemical and electrochemical treatments on surfaces. Copper; nickel; chromium electrolyte covering on ferrous materials, replaces uni 4234
UNI 4876-1961 Surface treatment of metal materials. Vickers hardness test for hard chromium electrolytic plating on ferrous materials

American Society for Testing and Materials (ASTM)

ASTM C1637-21 Standard Test Method for Determination of Impurities in Plutonium Materials—Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
ASTM A1093/A1093M-15 Standard Specification for Electrolytic Plasma Treatment Processing of Conductive Materials
ASTM A1093/A1093M-15(2020)e1 Standard Specification for Electrolytic Plasma Treatment Processing of Conductive Materials

Spanish Association for Standardization (UNE)

UNE-EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods (IEC 60426:2007). (Endorsed by AENOR in April of 2007.)
UNE 21362:1978 TEST METHODS FOR DETERMINING ELECTROLYTIC CORROSION WITH INSULATING MATERIALS
UNE 64015:1971 MIXED FEEDS AND RAW MATERIALS. QUANTITATIVE DETERMINATION OF HUMIDITY AND VOLATILE MATTER. HOT DISSECATION METHOD.

Lithuanian Standards Office

LST EN 60426-2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods (IEC 60426:2007)

American Association of State Highway and Transportation Officials

AASHTO T 44-2023 Solubility of Bituminous Materials

National Standardisation Body (ASRO)

STAS 10368-1982 SOLID ELECTRICAL INSULATING MATERIALS Test methods for determining the electrolytic corrosion of metals in the presence of electrical insulating materials

Magyar Szabványügyi Testület

MNOSZ 2835-1951 Powder pigment detection electrolyte method lead content test
MSZ 64/1-1987 Copper material quality

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0310-1-1963*DIN VDE 0310-1:1963 Electrical insulation wood - Part 1: Material properties

Society of Automotive Engineers (SAE)

SAE ARP6287-2018 Environmental Degradation of Composite Materials