Eastern Particulate Sampling

Eastern Particulate Sampling, Total:73 items.

The international standard classification for "Eastern Particulate Sampling" includes: Air quality in general , Particle size analysis. sieving , Wastes , Ferroalloys , Filters, seals and contamination of fluids .

The Chinese standard classification for "Eastern Particulate Sampling" includes: Analysis methods for toxic substances in atmosphere , Sieving, Sieve Plate and Sieve Screen , Gas medium and radioactive substance sampling , Iron alloy , Hydraulic and pneumatic device .

Professional Standard - Agriculture

空气和废气监测分析方法 7.2.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources Three-source Sample Collection Methods
空气和废气监测分析方法 5.1.3-2003 Part Five Pollution Source Monitoring Chapter One Sampling Three Particle Sampling Methods

National Metrological Verification Regulations of the People's Republic of China

JJG 943-2011 Total Suspended Particulates sampler
JJG 943-1998 Verification Regulation of Total Suspended Particulate Sampler

Professional Standard - Environmental Protection

HJ/T 374-2007 Technical requirement and test procedures for total suspended particulates sampler
HJ 93-2013(XG1-2018) Ambient air particulate matter (PM10 and PM2.5) sampler technical requirements and detection methods "No. 1 Amendment"
HJ 93-2013 Specifications and Test Procedures for PM10 and PM2.5 Sampler

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 38517-2020(英文版) Particulate—Bioaerosols sampling and analysis—General principles
GB/T 25051-2010 Ferronickel shot—Sampling for analysis
GB/T 16157-1996 The determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source
GB/T 16157-1996(XG1-2018) "Determination of Particulate Matter in Exhaust from Stationary Pollution Sources and Sampling Methods of Gaseous Pollutants" Amendment No. 1
GB/T 37163-2018 Hydraulic fluid power—Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
GB/T 38517-2020 Particulate—Bioaerosols sampling and analysis—General principles
GB/T 39990-2021 Particulate -- Bioaerosol sampler -- Technical specification

National Metrological Technical Specifications of the People's Republic of China

JJF 1736-2018 Program of Pattern Evaluation of Total Suspended Particulates Samplers

Shandong Provincial Standard of the People's Republic of China

DB37/ 1996-2011 Integrated Emission Standards for Air Particulate Matter from Stationary Sources in Shandong Province

Professional Standard - Aviation

HB 8581-2020 Hydraulic fluid power- Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light- extinction principle

Bureau of Indian Standards

IS 4879-2023 Particulate Materials Sampling And Sample Splitting Technique

Ente Nazionale Italiano di Unificazione

UNI 10243:1994 Cereals. Sampling of caryopsis (as grain).

Spanish Association for Standardization (UNE)

UNE 56916:1988 GRANULATED CORK. SAMPLING

American Society for Testing and Materials (ASTM)

ASTM D4536-96 Standard Test Method for High-Volume Sampling for Solid Particulate Matter and Determination of Particulate Emissions
ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
ASTM F304-70(1980) Practice of particle sampling from coiled bellows in aerospace components

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
AS/NZS 3580.9.7:2009 Methods of sampling and analysis of ambient air Determination of suspended particulate matter Dichotomous sampler (PM10, coarse PM and PM2.5) Gravimetric method
AS/NZS 3580.9.15:2014 Methods for sampling and analyzing ambient air Determination of suspended particulates Particulate metals High or low volume samplers Gravity collection Inductively coupled plasma (ICP) spectroscopy
AS/NZS 3580.9.17:2018 Methods for sampling and analysis of ambient air, Method 9.17: Demonstration of equivalence for ambient particulate matter monitoring methods
AS/NZS 3580.9.12:2022 Methods for sampling and analysis of ambient air, Method 9.12: Determination of suspended particulate matter — PM2.5 beta attenuation monitors
AS/NZS 3580.9.11:2016 Methods for sampling and analysis of ambient air - Method 9.11: Determination of suspended particulate matter - PM10 beta attenuation monitors
AS/NZS 3580.9.11:2022 Methods for sampling and analysis of ambient air, Method 9.11: Determination of suspended particulate matter — PM10 beta attenuation monitors
AS/NZS 3580.9.6:2015 Methods for sampling and analysis of ambient air Determination of suspended particulate matter Gravimetric method with PM10 large volume sampler with size-selective inlet

Association of German Mechanical Engineers

VDI 2463 Blatt 7-2012 Particulate matter measurement - Sampling device for suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
VDI 2463 Blatt-11 E:2020-05 Particulate matter measurement – Sampling of airborne particulate matter in ambient air – Active sampling with HVS (high volume sampler)
VDI 2463 Blatt 8-2012 Particulate matter measurement - Non-fractionating sampling system for suspended particulate matter in ambient air and indoor air for low-volume sampler (LVS)
VDI 2463 BLATT 8-2014 Measuring particles — Detection of suspended dust in outdoor air and indoor air — Non-fractional sampling system for low-volume samplers (LVS)
VDI 2463 BLATT 7-2014 Measuring particles — Detection of suspended dust and gaseous chemical compounds in outdoor and indoor air — Active sampling using low-volume samplers (LVS)
VDI 2463 Blatt-3 E:2022-08 Particulate matter measurement – Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air – Active sampling via low-volume sampler (LVS)
VDI 2463 BLATT 3-2023 Messen von Partikeln - Erfassung von luftgetragenen Partikeln und gasfoermigen chemischen Verbindungen in Aussenluft und Innenraumluft - Aktive Probenahme mittels Low-Volume-Sampler (LVS)

German Institute for Standardization

DIN CEN/TS 14778-2:2005 Solid biofuels - Sampling - Part 2: Methods for sampling particulate material transported in lorries; German version CEN/TS 14778-2:2005
DIN CEN/TS 14778-2:2005-11 Solid biofuels - Sampling - Part 2: Methods for sampling particulate material transported in lorries; German version CEN/TS 14778-2:2005
DIN EN ISO 10882-1:2001-04 Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2001); English version of DIN EN ISO 10882-1
DIN EN ISO 10882-1 E:2023-06 Draft Document - Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS 10882-1:2023); German and English version prEN ISO 10882-1:...

British Standards Institution (BSI)

BS ISO 14488:2007 Particulate materials. Sampling and sample splitting for the determination of particulate properties
BS ISO 14488:2007+A1:2019 Particulate materials. Sampling and sample splitting for the determination of particulate properties
BS DD 54-1:1977 Methods for the sampling and analysis of fume from welding and allied processes-Particulate matter
BS 7384:1991 Guide to laboratory methods for sampling and analysis of particulate matter generated by arc welding consumables
BS ISO 11648-2:2001 Statistical aspects of sampling from bulk materials - Sampling of particulate materials
BS DD CEN/TS 14778-2:2005 Solid biofuels - Sampling - Part 2: Methods for sampling particulate material transported in lorries
BS DD CEN/TS 14778-2:2006 Solid biofuels. Sampling. Methods for sampling particulate material transported in lorries

Standard Association of Australia （SAA）

AS 1141.32:2008 Methods for sampling and testing aggregates - Weak particles (including clay lumps, soft and friable particles) in coarse aggregates
AS 2724.3:1984 Ambient air - Particulate matter - Part 3: Determination of total suspended particulates (TSP) - High volume sampler gravimetric method
AS 3580.9.9:2017 Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter — PM 10 low volume sampler — Gravimetric method
AS 3580.10.1:1991 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulates - Deposited matter - Gravimetric method
AS 3580.9.10:2017 Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter — PM 2. low volume sampler — Gravimetric method
AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
AS 4323.2:2023 Stationary source emissions, Method 2: Determination of total particulate matter — Isokinetic manual sampling — Gravimetric method
AS 4323.2:1995(R2014) Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
AS 1141.7:1995 Methods for sampling and testing aggregates - Apparent particle density of filler
AS 3853.1:1991 Fume from welding and allied processes, Part 1: Guide to methods for the sampling and analysis of particulate matter
AS 1141.5:2000 Methods for sampling and testing aggregates - Particle density and water absorption of fine aggregate

Japanese Industrial Standards Committee (JISC)

JIS Z 8833:2011 Sample reduction for the determination of particulate properties

Thai Industrial Standards Institute (TISI)

TIS 2574-2012 Airborne particulate matter sampling and analysis in workplace environment

American Welding Society (AWS)

AWS F1.1-1985 METHOD FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED PROCESSES

Danish Standards Foundation

DANSK DS/ISO 10882-1:2024 Health and safety in welding and allied processes – Sampling of airborne particles and gases in the operator's breathing zone – Part 1: Sampling of airborne particles
DANSK DS/CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis

European Committee for Standardization (CEN)

EN ISO 8049:2016 Ferronickel shot - Sampling for analysis
CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis

Canadian General Standards Board （CGSB)

CAN/CGSB-176.2 No.1-1996 Methods of Sampling and Testing Tobacco Determination of Benzo[a]pyrene in Total Particulate Matter of Tobacco Smoke

Military Standards (MIL-STD)

MIL MIL-S-24186B-1986 SAMPLER, AIR PARTICLE, HD-732/UD (SUPERSEDING MIL-S-24186A)

Indonesia Standards

SNI 7119.14:2016 Outdoor ambient - Part 14: Method for testing particles with size ≤ 2.5 μm (PM2.5) using High Volume Air Sampler (HVAS) equipment with gravimetric method

Association Francaise de Normalisation

NF EN ISO 10882-1:2011 Hygiene and safety in welding and related techniques - Sampling of suspended particles and gases in the respiratory zone of operators - Part 1: sampling of suspended particles

Standards Norway

NS 4861:1985 Air quality - Emission measurements - Sampling strategy for particulates in ducts and stacks