of third-party testing

of third-party testing, Total:459 items.

The international standard classification for "of third-party testing" includes: Other non-ferrous metals and their alloys , Integrated Services Digital Network(ISDN) , Analytical chemistry , Cosmetics. Toiletries , Non-ferrous metals in general , audio, video and audiovisual engineering , Thyristors , Coals , Organic chemicals in general , Chemical analysis , Aerospace electric equipment and systems , Other equipment for telecommunication systems , Surface active agents .

The Chinese standard classification for "of third-party testing" includes: Rare metals and their alloys analysis method , Basic standard and general method for coating , Communication network performance index and testing , Basic organic chemicals , Cosmetics , Heavy metals and their alloys analysis method , Broadcasting and television network in general , Power semiconductor device and parts , Coal analysis methods , General organic chemicals , Technical management , Technical management , Basic standards and general methods , Spacecraft control and guidance system , Communication line and equipment , Facsimile telegraph equipment , Tooth paste, soap and detergent , Oxide and elementary substance , Inorganic chemicals in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

SN/T 4538.2-2016 Commercial kit method-Melamine-Test method II
SN/T 4532.3-2017 Commercial kit test method—Beta-lactams—Test method Ⅲ
GB/T 3789.23-1991 Measurements of the electrical properties of transmitting tubes-Measuring methods of grid No3 control ability
GB/T 17154.2-1997 ISDN user-network interface layer 3 specification and testing method for basic call control procedure Part 2: Testing method for layer 3 basic call control protocol
GB/T 3789.27-1991 Measurements of the electrical properties of transmitting tubes-Methods of measuring the inter modulation distortion of a three tone signal
SN/T 4538.4-2016 Commercial kit method―Melamine―Test method Ⅳ
GB/T 30053-2013 Determination of Benzene, toluene and xylene in crude benzene
GB/T 3254.1-1998 Antimony trioxide―Determination of antimony trioxide content
GB 11186.3-1989 for measuring the colour of paint films - Part 3: Calculation of colour differences
GB/T 40697-2021 Specification for management of the third-party coal testing
GB/T 13531.2-1992 General methods on determination of cosmetics-Determination of colour tristimulus values and colour difference
GB/T 3789.11-1991 Measurements of the electrical properties of transmitting tubes-Measuring methods of grid No3 cut-off voltage
GB/T 3948-1983 Test method of three primary colors chromaticity coordinates for TV
SN/T 4538.1-2016 Commercial kit method--Melamine--Test method Ⅰ
GB/T 14634.5-2010 Test methods of rare earth three-band phosphors for fluorescent lamps—Part 5:Determination of density
SN/T 4538.3-2016 Commercial kit method-Melamine-Test method Ⅲ
SN/T 4537.3-2016 Commercial kit method-Chloroamphenicol-Test method III
GB/T 14634.1-2010 Test methods of rare earth three-band phosphors for fluorescent lamps—Part 1:Determination of relative brightness
GB/T 14634.3-2010 Test methods of rare earth three-band phosphors for fluorescent lamps—Part 3:Determination of thermostability
GB/T 14634.6-2010 Test methods of rare earth three-band phosphors for fluorescent lamps—Part 6:Determination of specific surface area
GB/T 6324.6-2014 Test method of organic chemical products―Part 6:Determination of color for liquids―Tristimulus colorimetry
GB/T 14634.7-2010 Test methods of rare earth three-band phosphors for fluorescent lamps—Part 7:Determination of temperature quenching
GB/T 15292-1994 Measuring methods for thyristor Reverse conducting triode thyristor

Professional Standard - Electron

SJ 2148-1982 Methods of measurement for dynamic impedance of silicon current regulator transistors
SJ/T 10871-1996 Methods of measurement for electrical properties of disk-seal tubes - Methods of measurement for the three tone inter-modulation distortion
SJ 2214.9-1982 Method of measurement for pulse rise and fall time of semiconductor photodiodes and phototransistors
SJ 2214.7-1982 Method of measurement for saturation voltage of semiconductor phototransistors
SJ 2214.8-1982 Method of measurement for dark current voltage of semiconductor phototransistors
SJ/Z 9094.12-1987 Methods of measurement for equipmemt used in terrestrial radio-relay systems--Part 3: Simulated systems--Section 3: Measurements for monochrome and colour television transmission
SJ 2214.10-1982 Method of measurement for light current of semiconductor photodiodes and phototransistors
SJ 2215.9-1982 Method of measurement for reverse cut-off current of semiconductor photocouplers transistors
SJ/T 10481-1994 Test method for resistivity of silicon epitaxial layers by area contacts three-probe techniques

Professional Standard - Aerospace

QJ 2463-1993 Test method for three-axis stabilized satellite control system
QJ 3140.6-2001 1 2 4-Butanetriol Analysis Method - Part 6: Determination of Ash in 1 2 4-Butanetriol
QJ 3140.4-2001 1 2 4-Butanetriol Analysis Method - Part 4: Determination of the Saponification Value of 1 2 4-Butanetriol
QJ 3140.3-2001 1 2 4-Butanetriol Analysis Method - Part 3: Determination of Aldehyde Group Matters and Reducing Substances in 1 2 4-Butanetriol
QJ 3140.9-2001 1 2 4-Butanetriol Analysis Method - Part 9: Determination of the Colority of 1 2 4-Butanetriol
QJ 3140.7-2001 1 2 4-Butanetriol Analysis Method - Part 7: Determination of the PH Value of 1 2 4-Butanetriol
QJ 3140.10-2001 1 2 4-Butanetriol Analysis Method - Part 10: Determination of the Water Content in 1 2 4-Butanetriol
QJ 3140.5-2001 1 2 4-Butanetriol Analysis Method - Part 5: Determination of the Chlorine Content in 1 2 4-Butanetriol
QJ 3140.8-2001 1 2 4-Butanetriol Analysis Method - Part 8: Determination of the Density of 1 2 4-Butanetriol

Group Standards of the People's Republic of China

T/CHBAS 10-2021 Determination of impurities in lithium trifluoromethanesulfonate
T/CHBAS 8-2021 Determination of trifluoromethanesulfonic anhydride
T/ZGTXXH 054-2023 IPv6+ benchmark test method part 3: cloud network service capability
T/CHBAS 7-2021 Determination method of trifluoromethanesulfonic acid
T/CHBAS 11-2021 Detection of impurities in trimethylsilyl trifluoromethanesulfonate

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2105.1-2016 Chemical test methods for footwear - Determination of trivalent chromium and hexavalent chromium

Professional Standard - Agriculture

水和废水监测分析方法 5.4.3-2003 Chapter 5 Biomonitoring Methods for Water and Wastewater Chapter 4 Biohazard Measurement and Evaluation 3 Plant Micronucleus Test
水和废水监测分析方法 5.3.3-2003 Chapter Five Biomonitoring Methods for Water and Wastewater Chapter Three Determination and Evaluation of Acute Biological Toxicity Three Fish Acute Toxicity Test (B)
水和废水监测分析方法 5.2.3-2003 Chapter 5 Biomonitoring Methods of Water and Wastewater Chapter 2 Bacteriological Determination in Water Preparation of Three Mediums
SN/T 4544.3-2023 Commercial Kit Method-Aerobic Count-Test method

Professional Standard - Machinery

JB/T 7626-2013 Testing Methods for Reverse-blocking Triode Thyristors
JB/T 7619-1994 Test Method for Two-way Triple Pole Thyristors
JB/T 7626-1994 Test method for reverse blocking triple pole thyristors

Guangdong Provincial Standard of the People's Republic of China

DB4403/T 383.5-2023 Electronic seal Part 5: Third-party application access requirements and testing methods

Shandong Provincial Standard of the People's Republic of China

DB37/T 1433-2009 Third-party acceptance test specification for e-government information system

未注明发布机构

DD CEN ISO/TS 22475-3:2007 Sampling methods for geological survey and testing and groundwater measurement Part 3: Third-party conformity assessment of companies and personnel
FORD FLTM AK 002-1-2001 ACID ACCEPTANCE AND STABILITY TESTS FOR TRICHLORETHYLENE

Professional Standard - Post and Telecommunication

YD 524-1992 Technical requirement and test method of XL923 series integrated unit of match coil, choking coil, drainage coil and protector
YD/T 703-1993 Inspection and test methods for 3 document facsimile terminals

Professional Standard - Railway

TB/T 1971-1987 Test Methods for Tee Valve of Passenger Train on 701 Type Test Bench
TB/T 1970-1987 The test method of the three-way valve of the truck on the 701 type test bench

Professional Standard - Coal

MT/T 357-1994 Determination Method of Trichloromethane Extract of Coal
MT 357-1994 Determination method of chloroform extract from coal

Professional Standard - Light Industry

QB/T 2789-2006 General methods on determination of cosmetics (1)
QB/T 2969-2008 Determination of triclosan in toothpastes

Professional Standard - Commodity Inspection

SN/T 0837.3-1999 Method for the determination of iron in arsenic trioxide for export
SN/T 0837.1-2011 Method for Chemical Analysis of Arsenic Trioxide for Import and Export. Part 1: Determination of Arsenic Trioxide Content
SN/T 4545.3-2022 Commercial kit test method - Salmonella - Test method III
SN/T 0837.1-1999 Method for the determination of purity of arsenic trioide for export

Professional Standard - Energy

NB/T 10524-2021 Experimental test method for shearers-scraper convepers-hydraulic supports matched performance in fully mechanized mining face

Professional Standard - Non-ferrous Metal

YS/T 1014.1-2014 Methods for chemical analysis of bismuth trioxide—Part 1:Determination of bismuth trioxide content—Na2EDTA titrimetric method

Japanese Industrial Standards Committee (JISC)

JIS K 1556:1968 Testing method for tolylene diisocyanate
JIS K 1556:2006 Polyurethane raw materials -- Testing methods for toluene diisocyanate
JIS B 7440:1987 Test code for accuracy of coordinate measuring machines

AASHTO - American Association of State Highway and Transportation Officials

HM-33 PT II-2013 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING - PART 2A TESTS (Thirty-Third Edition)
HM-33-2013 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Third Edition)
HM-33 PT I-2013 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING - PART 1A SPECIFICATIONS (Thirty-Third Edition)
HM-35 PT 1B-2015 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fifth Edition)
HM-34 PT 1A-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
HM-34 PT 2A-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
HM-34 PT 1B-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
HM-34-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
HM-34 PT 2B-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
HM-35 PT II-2015 Standard Specifications for Transportation Materials and Methods of Sampling and Testing and AASHTO Provisional Standards Part 2: Tests (Thirty-Fifth Edition)
T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 226-1990 Standard Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements
T 296-1995 Standard Method of Test for Unconsolidated@ Undrained Compressive Strength of Cohesive Soils in Triaxial Compression (Twentieth Edition)
HM-35 PT I-2015 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING - PART 1A and 1B (Thirty-Fifth Edition)
HM-34 PT I-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING - PART 1A SPECIFICATIONS (Thirty-Fourth Edition)
T 296-1994 Standard Method of Test for Unconsolidated@ Undrained Compressive Strength of Cohesive Soils in Triaxial Compression (Eighteenth Edition)
HM-35-2015 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING AND AASHTO PROVISIONAL STANDARDS (Thirty-Fifth Edition)
T 296-2005 Standard Method of Test for Unconsolidated@ Undrained Compressive Strength of Cohesive Soils in Triaxial Compression
T 296-2010 Standard Method of Test for Unconsolidated@ Undrained Compressive Strength of Cohesive Soils in Triaxial Compression

The American Road & Transportation Builders Association

AASHTO HM-33 PT II-2013 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING - PART 2A TESTS Thirty-Third Edition
AASHTO HM-33-2013 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING Thirty-Third Edition
AASHTO HM-34 PT 1A-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
AASHTO HM-35 PT 1B-2015 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fifth Edition)
AASHTO HM-34 PT 2A-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
AASHTO HM-34 PT 2B-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
AASHTO HM-34 PT 1B-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
AASHTO HM-34-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
AASHTO HM-35 PT II-2015 Standard Specifications for Transportation Materials and Methods of Sampling and Testing and AASHTO Provisional Standards Part 2: Tests (Thirty-Fifth Edition)
AASHTO T 325-2004 Standard Method of Test for Estimating the Strength of Concrete in Transportation Construction by Maturity Tests
AASHTO HM-34 PT I-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING - PART 1A SPECIFICATIONS (Thirty-Fourth Edition)
AASHTO HM-35 PT I-2015 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING - PART 1A and 1B (Thirty-Fifth Edition)
AASHTO T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (ASTM Designation: C78-15b)
AASHTO T 226-2022 Standard Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements
AASHTO T 296-2010 Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression
AASHTO HM-35-2015 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING AND AASHTO PROVISIONAL STANDARDS (Thirty-Fifth Edition)
AASHTO T 226-1990 Standard Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements

American Society for Testing and Materials (ASTM)

ASTM RR-D26-1011 1991 D3444-Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3444-00(2015) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3444-00(2020) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM E1885-18 Standard Test Method for Sensory Analysis—Triangle Test
ASTM E2004-18 Standard Test Method for Facing Cleavage of Sandwich Panels
ASTM D3742-98 Standard Test Method for 1,1,1-Trichloroethane Content
ASTM E2004-18(2024) Standard Test Method for Facing Cleavage of Sandwich Panels
ASTM E2610-25 Standard Test Method for Sensory Analysis—Duo-Trio Test
ASTM D1721-97(2007) Standard Test Method for Permanganate Time of Tricresyl Phosphate
ASTM D5311-92(2004) Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
ASTM D1721-97(2001) Standard Test Method for Permanganate Time of Tricresyl Phosphate
ASTM D3444-00 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3444-00(2005) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3448-85(2005) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM D3448-10(2015)e1 Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM E567-91 Test Method for the Presence of Triol Groups with Hydrobromic Acid
ASTM D3443-00 Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D5351-93(2003) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
ASTM D3443-00(2010) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3444-00(2010)e1 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D5386-05 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D5350-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM D3448-85(2000) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM D3443-00(2015) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3448-10(2020) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM D3443-00(2005) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3443-00(2020) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D5386-04 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D4012-81(2002) Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM D1635/D1635M-19 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D4012-81(1997) Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM D5350-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM D5386-16 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D4954-89(2003) Standard Test Method for Determination of Nitrilotriacetates in Detergents
ASTM D3979-86 Test method for the determination of particulate matter in trichlorofluoromethane
ASTM D5350-95 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM D2943-96(2000) Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM D2943-96 Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM D5386-93b(2000)e1 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D1399-95(2000) Standard Test Method for Unsaponifiable Contents of Tricresyl Phosphate
ASTM D4954-89(2017) Standard Test Method for Determination of Nitrilotriacetates in Detergents
ASTM D5351-93(2009) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
ASTM D3448-10 Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM RR-E37-1032 2003 E2092-Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D5386-10 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D3443-00(2010)e1 Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D4954-89(1995)e1 Standard Test Method for Determination of Nitrilotriacetates in Detergents
ASTM D2943-02(2012) Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM E1347-06(2011) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1347-06 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1885-97 Standard Test Method for Sensory Analysis-Triangle Test
ASTM E1885-04 Standard Test Method for Sensory Analysis8212;Triangle Test
ASTM D5352-95 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D8067/D8067M-17 Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
ASTM D5352-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM E2610-18 Standard Test Method for Sensory Analysis—Duo-Trio Test
ASTM D5352-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D6045-04 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D4954-89(2009) Standard Test Method for Determination of Nitrilotriacetates in Detergents
ASTM RR-E01-1103 1983 E0945-Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by Complexometric Tritrimetry
ASTM RR-E34-1002 2011 E2694-Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
ASTM D5386-24 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM RR-E34-1001 2009 E2694-Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
ASTM RR-E37-1025 2000 E2092-Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E1885-25 Standard Test Method for Sensory Analysis—Triangle Test
ASTM D2943-02 Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM D5202-02 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
ASTM D2943-02(2007) Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM D5202-08 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
ASTM C1505-01 Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM E2004-04 Standard Test Method for Facing Cleavage of Sandwich Panels
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM E1347-06(2015) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM D6045-12 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM C1505-01(2007) Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM D7066-04(2017) Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM E1347-06(2020) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E2004-99 Standard Test Method for Facing Cleavage of Sandwich Panels
ASTM D2850-03a Standard Test Method for Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
ASTM D3999-91(2003) Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM RR-E15-1065 2008 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)
ASTM RR-D04-2000 2022 D2042-Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene
ASTM D3999-11 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM D7066-04(2024) Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM D6045-12(2017) Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM E2036-24 Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
ASTM D2664-04 Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
ASTM RR-D02-1854 2017 D7687-Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM STP 1192-1993 Engine Coolant Testing: Volume 3
ASTM D2850-03 Standard Test Method for Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
ASTM E2313-04 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)
ASTM E1347-03 Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
ASTM D3999-91(1996) Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM E2610-08 Standard Test Method for Sensory Analysis x2014; Duo-Trio Test
ASTM D7066-04 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM C78-00 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D6045-20 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D4767-11(2020) Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM C78-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2694-21 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
ASTM D5562-95(2018) Standard Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps
ASTM D7181-20 Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils
ASTM E2694-16 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids

GB-REG

REG 30 CFR PART 7-2011 TESTING BY APPLICANT OR THIRD PARTY

Standard Association of Australia （SAA）

AS 1180 (PT 9A TO 9C):1973 Methods of test for hose made from elastomeric materials - Third Group Methods 9A, 9B, 9C
AS 2542.2.2:2014 Sensory analysis, Part 2.2: Methodology — Triangle test
AS 2542.2.4:2014 Sensory analysis, Part 2.4: Methodology — Duo-trio test
HB 18.43.1-1998 Guidelines for third-party certification and accreditation - Guide 43 - Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
AS A89.17A:1972 Methods of testing soils for engineering purposes, Method 17A: Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water pressure
HB 18.44-1991 Guidelines for third-party certification and accreditation - Guide 44 - General rules for ISO or IEC international third-party certification schemes for products
AS 2891.7.2:1993 Methods of sampling and testig asphalt Method 7.2:Determination of maximum density of asphalt - Trichloroethane displacement method

Compressed Gas Association (U.S.)

CGA M-13-2014 Certifying third-party testing laboratories
CGA M-13-2008 Certifying third-party testing laboratories

RO-ASRO

STAS 7246/5-1974 ASYNCHRONOUS THREEPHASE MOTORS Test methods No-load test
SR 8327-4-1996 Rubber tyres-Testing methods for determination of dimensional characteristics
STAS 7246/3-1974 ASYNCHRONOUS TRIPHASE MOTORS Test methods. Insulation test
STAS 7246/2-1974 ASYNCHRONOUS TRIPHASE MOTORS Test methods Reslstance test
STAS 7246/8-1974 THREE-PHASE INDUCTION MOTORS TEST METHODS Temperature-rise test
STAS 7246/7-1974 ASYNCHRONOUS THREEPHASE MOTORS Test methods Overspeed test and momentary excess load test
STAS 7246/4-1974 ASYNCHRONOUS TRIPHASE MOTORS Test methods. Voltage ratio measurement

U.S. Military Regulations and Norms

ARMY A-A-52573 A-2003 THEODOLITES, SURVEYING, DIRECTION: THIRD ORDER

Swedish Institute for Standards

SS-EN 12674-3:2004 Roll containers - Part 3: Test methods
ASTM D3443-10 Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM E1347-11 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
SS-EN 14323:2021 Wood-based panels - Melamine faced boards for interior uses - Test methods
SS-EN ISO 10399:2018 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017)
SS-EN ISO 4120:2021 Sensory analysis - Methodology - Triangle test (ISO 4120:2021)
SS-EN 14154-3:2005 Water meters - Part 3: Test methods and equipment

Korean Agency for Technology and Standards (KATS)

KS C 7023-2020 Testing Methods for Reverse Blocking Triode Thyristors
KS F 2325-1982 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2325-2002 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS M 2256-2022 Testing method for solubility of bituminous materials in trichloroethane
KS M 2256-2007(2017) Testing method for solubility of bituminous materials in trichloroethane
KS F 2325-2002(2022) Testing method for flexural strength of soil－cement using simple beam with third point loading
KS B 4919-1995(2010) Self-centering manually-operated chucks for machine tools-acceptance test specifications(geometrical tests)
KS F ISO 13784-1-2017 Reaction to fire test for sandwich panel building systems —Part 1: Small room test
KS F 2346-1982 Testing method for unconsolidated, undrained strength of cohesive soils in triaxial compression
KS F 2346-2017 Testing method for unconsolidated, undrained strength of cohesive soils in triaxial compression
KS A ISO/IEC GUIDE 23-2002(2022) Methods of indicating conformity with standards for third－party certification systems
KS C 4201-2003 Testing methods of three-phase induction motor characteristics
KS C 7023-1978(2013) Testing Methods for Reverse Blocking Triode Thyristors
KS F 2325-2002(2017) Testing method for flexural strength of soil－cement using simple beam with third point loading
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS C 7023-1986 Testing Methods for Reverse Blocking Triode Thyristors
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS K 6323-2017(2022) Textiles－Test method for assessing the smoothness appearance of seams in fabrics using three-dimensional measuring apparatus

ECMA - European Association for Standardizing Information and Communication Systems

396-2014 Test Method for the Estimation of Lifetime of Optical Disks for Long-term Data Storage (3rd Edition)

International Organization for Standardization (ISO)

ISO/TR 21865:2017 Fireworks - Third party testing - Voluntary scheme
ISO/TS 22475-3:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party

IX-ECMA

ECMA 396-2014 Test Method for the Estimation of Lifetime of Optical Disks for Long-term Data Storage (3rd Edition)

Bureau of Indian Standards

IS 1350-2-2022 Method of test for Coal and Coke Part 2 Determination of gross calorific value Third Revision
IS 2720-25-1982 Methods of test for soils: Part 25 Determination silica sesquioxide ratio
IS 3708-9-2018 Methods of Test for Natural Rubber Latex-9 Determination of Total Ash (Third Revision)
IS 17824-2022 Sensory analysis Methodology Triangle test
IS 1060-5-3-2014 Methods of Sampling and Test for Paper and Allied Products Part 5 Methods of Test for Paper and Board Section 3 Determination of thickness, density and specific volume
IS 3660-4-2017 Methods of Test for Natural Rubber Part 4 Determination of Total Copper - Photometric Method [NR : 4] (Third Revision)
IS 1448-42-2015 Methods of Test for Petroleum and Its Products [P : 42] Determination of the Water Reaction of Aviation Fuels ( Third Revision )
IS 1216-2023 Tar And Bituminous Materials - Methods For Test - Determination Of Solubility In Trichloroethylene
IS 548-2-22-1993 Methods of sampling and test for oils and fats: Part 2 Purity test - Section 22 Detection of tricresyl phosphate in edible oil
IS 443-4-2016 Methods of Test for Rubber and Plastics Hoses Part 4 Determination of Electrical Resistance and Conductivity ( Third Revision )
IS 286-2018 Methods of Sampling and Testfor Soaps ( Third Revision )
IS 17826-2022 Sensory analysis Methodology Duo-trio Test
IS 101-4-2-2021 Methods of sampling and test for paints varnishes and related products: Part 4 optical tests: Sec 2 colour Third Revision
IS/IEC 62153-4-4-2015 Metallic communication cable test methods Part 4 Electromagnetic compatibility EMC Section 4 Test method for measuring of the screening attenuation a s up to and above 3 GHz triaxial method

German Institute for Standardization

DIN 10951:1986 Sensory testing method triangle test
DIN EN ISO 4120:2021-06 Sensory analysis - Methodology - Triangle test (ISO 4120:2021); German version EN ISO 4120:2021
DIN 53292:1982-02 Testing of sandwiches; Tensile test perpendicular to the faces
DIN EN ISO 10399:2018-04 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017); German version EN ISO 10399:2018
DIN 18137-2:2011-04 Soil, investigation and testing - Determination of shear strength - Part 2: Triaxial test
DIN ISO/TS 22475-3:2008 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party (ISO/TS 22475-3:2007); German version CEN ISO/TS 22475-3:2007
DIN 55681:1985-08 Solvents - Stability testing of trichlorethylene
DIN EN ISO 11334-4:1999-12 Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs; German version EN ISO 11334-4:1999
DIN EN ISO 4120:2007-10 Sensory analysis - Methodology - Triangle test (ISO 4120:2004)
DIN 766:1986-01 Calibrated and tested grade 3 round steel link chains
DIN EN 14323:2004-06 Wood-based panels - Melamine faced boards for interior uses - Test methods
DIN EN 14323:2017-07 Wood-based panels - Melamine faced boards for interior uses - Test methods
DIN 79005 E:2014-11 Athletics - Horizontal jump disciplines - Requirements and test methods for long and triple jump
DIN 79005 E:2016-02 Athletics - Horizontal jump disciplines - Requirements and test methods for long and triple jump
DIN 79005:2017-04 Athletics - Horizontal jump disciplines - Requirements and test methods for long and triple jump

Gosstandart of Russia

GOST 10169-1977 3-phase synchronous machines. Test methods
GOST EN 1023-3-2016 Office furniture. Screens. Part 3. Test methods
GOST R ISO 10360-4-2017 Geometrical product specifications. Acceptance and reverification tests for coordinate measuring machines. Сoordinate measuring machines used in scanning mode
GOST EN 13274-3-2018 Occupational safety standards system. Respiratory protective devices. Methods of test. Part 3. Determination of breathing resistance
GOST R ISO 10328-3-1998 Prosthetics. Structural testing of lower-limb prostheses. Part 3. Principal structural tests
GOST 14839.9-1969 Industrial explosives. Method for determination of nitroamines (hexogen) content
GOST R ISO 10360-3-2017 Geometrical product specifications. Acceptance and reverification tests for coordinate measuring machines. Сoordinate measuring machines with the axis of a rotary table as the fourth axis

Association of German Mechanical Engineers

VDI/VDE 2617 Blatt 8-2004 Accuracy of coordinate measuing machines - Testsuitability of measurements with coordinate measuring machines
VDI/VDE 2617 Blatt 8-2006 Accuracy of coordinate measuring machines - Characteristics and their testing - Test suitability of measurements with coordinate measuring machines
DVS 2212-3-1993 Plastic Welder Test; Test Group Three: Railways in Earthworks and Hydraulic Engineering
VDI/VDE 2617 BLATT 8-2013 Accuracy of coordinate measuring machines - Characteristics and their checking - Test suitability of measurements with coordinate measuring machines
VDI/VDE 2617 BLATT 8-2017 Accuracy of coordinate measuring machines - Characteristics and their testing - Test suitability of measurements with coordinate measuring machines
VDI/VDE 2617 BLATT 8-2018 Accuracy of coordinate measuring machines - Characteristics and their testing - Test process suitability of measurements with coordinate measuring machines
VDI/VDE 2617 BLATT 2.2-2018 Accuracy of coordinate measuring machines — Parameters and their testing — Form measurement with coordinate measuring machines
VDI/VDE 2617 BLATT 2.3-2004 Accuracy of coordinate measuring machines — Parameters and their testing — Acceptance and confirmation testing of large-scale coordinate measuring machines
VDI/VDE 2617 Blatt 2.3-2001 Accuracy of coordinate measuring machines - Parameters and their reverification - Acceptance and reverification test for coordinate measuring machines of large dimensions
VDI/VDE 2617 BLATT 8-2013 Accuracy of coordinate measuring machines - Characteristics and their checking - Test suitability of measurements with coordinate measuring machines
VDI VDE 2617 Blatt-2-4 E:2022-08 Accuracy of coordinate measuring machines – Characteristics and their testing – Interim check of coordinate measuring machines with artefacts
VDI/VDE 2617 BLATT 5-2010 Accuracy of coordinate measuring machines — parameters and their testing — monitoring by test bodies
VDI/VDE 2617 BLATT 12.1-2011 Accuracy of coordinate measuring machines — Parameters and their testing — Acceptance and confirmation tests for coordinate measuring machines for tactile measurement of microgeometries
VDI/VDE 2617 Blatt 12.1-2009 Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests for tactile CMM measuring microgeometries
VDI/VDE 2617 BLATT 2.2-2016 Accuracy of coordinate measuring machines - Characteristics and their testing - Form measurement with coordinate measuring machines

Ente Nazionale Italiano di Unificazione

UNI 11058:2003 Tests on glass - Determination of ferric and ferric iron
UNI EN 12572-3:2017 Artificial climbing structures - Part 3: Safety requirements and test methods for climbing holds

Canadian Standards Association (CSA)

CAN/CSA-C838-2013(R2018) Energy Efficiency Test Methods for Third-Party Variable Frequency Drive Systems
CSA C390-2010 Test Methods, Marking Requirements and Energy Efficiency Levels for Three-Phase Induction Motors (Fourth Edition)
CSA C838-2013(R2022) Energy efficiency test methods for three-phase variable frequency drive systems, Includes Update No. 1 (2014)
CSA C361-92-CAN/CSA-1992 Determination of Drum Capacity and Methods of Testing Energy Consumption of Household Tumble Dryers Third Edition; Update #1
CSA C390-98-1998 Mesure Du Rendement Energetique Des Moteurs A Induction Triphases Troisieme Edition; Fiche No 1; Mise A Jour No 2
CSA C390-M1985-1985 Energy Efficiency Test Methods for Three-Phase Induction Motors
CAN/CSA-C390-1998(R2005) Energy Efficiency Test Methods for Three-Phase Induction Motors
CAN/CSA-P.4.1-2015 Testing method for measuring annual fireplace efficiency (Third Edition; Update No.1 : December 2015; Errata: January 2016)
CAN/CSA C390-1998(R2005) Energy Efficiency Test Methods for Three-Phase Induction Motors
CAN/CSA-C838-2013 Energy efficiency test methods for three-phase variable frequency drive systems
CAN/CSA C838-2013(R2022) Energy efficiency test methods for three-phase variable frequency drive systems
CSA C22.2 NO.160-2015 Voltage and Polarity Testers (Third Edition)
CAN/CSA-A123.21-2014 Standard test method for the dynamic wind uplift resistance of membraneroofing systems (Third Edition; Update No. 1: May 2015)

British Standards Institution (BSI)

BS 4427-13:1982 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Condensed phosphates for industrial use (including foodstuffs) - determination of calcium content - flame at...
BS 4427-2:1969(1999) Methods of test for Sodium tripolyphosphate (pentaSodium triphosphate) and sodium pyrophosphate (tetraSodium pyrophosphate) — Part 2 : Measurement of pH value of sodium tripolyphosphate
16/30350892 DC PD ISO/TR 21865. Fireworks. Third Party Testing. Voluntary Scheme
BS 4427-4:1969(2011) Methods of test for Sodium tripolyphosphate (penta sodium triphosphate) and sodium pyrophosphate (tetra sodium pyrophosphate) — Part 4 : Determination of loss on ignition
BS 22475-3:2011 Geotechnical investigation and testing. Sampling methods and groundwater measurements. Conformity assessment of enterprises and personnel by third party
BS 4427-2:1969 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Measurement of pH value of sodium tripolyphosphate
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
21/30393381 DC BS EN ISO 4210-3. Cycles. Safety requirements for bicycles. Part 3. Common test methods
BS EN ISO 10399:2018 Sensory analysis. Methodology. Duo-trio test
BS EN 14323:2021 Wood-based panels. Melamine faced boards for interior uses. Test methods
BS 4427-1:1969 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of matter insoluble in water in sodium tripolyphosphate
BS DD CEN ISO/TS 22475-3:2007 Geotechnical investigation and testing. Sampling methods and groundwater measurements-Conformity assessment of enterprises and personnel by third party
BS 4427-1:1969(2011) Methods of test for Sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) — Part 1 : Determination of matter insoluble in water in sodium tripolyphosphate
BS 4427-4:1969 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of loss on ignition
BS 4427-5:1974 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of particle size distribution
BS IEC 62153-4-9:2018+A2:2024 Metallic communication cable test methods-Electromagnetic compatibility (EMC) related test method for measuring coupling attenuation of screened balanced cables. Triaxial method
BS 4427-7:1974 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use-Estimation of tripolyphosphate (triphosphate) content of sodium tripolyphosphate
BS 4427-5:1974(2011) Methods of test for Sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use — Part 5 : Determination of particle size distribution
20/30410179 DC BS EN 14323. Wood-based panels. Melamine faced boards for interior uses. Test methods

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2006-1998 Rubber for Aerospace Use Test Methods (Edition 3)

AT-ON

ONORM B 3343-1997 Masonry and rendering/plastering mortar - Test procedures for first and third party control
OENORM EN ISO 4120:2021 Sensory analysis - Methodology - Triangle test (ISO 4120:2021)

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.2-1998 Dimensional Test Methods Revision I

Spanish Association for Standardization (UNE)

UNE-EN ISO 4120:2022 Sensory analysis - Methodology - Triangle test (ISO 4120:2021)
AENOR UNE-EN 14323:2017 Wood based panels. Boards coated with melamine for interior use. Test methods.
UNE 87-006-1992 Sensory analysis. Methodology. Triangular test
UNE-EN ISO 11334-4:1999 WALKING AIDS MANIPULATED BY ONE ARM. REQUIREMENTS AND TEST METHODS. PART 4: WALKING STICKS WITH THREE OR MORE LEGS (ISO 11334-4:1999)
UNE-EN 1716:1997 PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) TAPPING TEES. TEST METHOD FOR IMPACT RESISTANCE OF AN ASSEMBLED TAPPING TEE.
UNE 87006:1992 SENSORY ANALYSIS. METHODOLOGY. TRIANGULAR TEST.
UNE 56926:2004 ERRATUM Three parts stoppers. Tests methods and specifications.
UNE 56926:2001 Three parts stoppers. Tests methods and specifications.
UNE-EN ISO 10399:2018 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
UNE 53539:2016 Non metallic pipes for connections to installations and devices using 2nd and 3rd family gases. Characteristics and test methods
UNE-EN ISO 4120:2008 Sensory analysis - Methodology - Triangle test (ISO 4120:2004)
UNE-EN 13179-1:2001 TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST.
AENOR UNE-EN 1176-11:2015 Equipment of playing areas and surfaces. Part 11: Additional security requirements and test methods specific for three-dimensional networks.

American Welding Society (AWS)

WRC 299:1984 Part 1: Engineering Aspects of CTOD Fracture Toughness Testing; Part 2: Three-Dimensional Elastic-Plastic Finite Element Analysis of Three-Point Bend Specimen; Part 3: Failure Prediction of Notched Pressure Vessels Using The CTOD Approach

International Electrotechnical Commission (IEC)

IEC 851-5:1996 Winding Wires - Test Methods - Part 5: Electrical Properties Third Edition
IEC 60393-1C:1979 Third supplement - Potentiometers - Part 1: Terms and methods of test
IEC 62153-4-4:2015 Metallic communication cable test methods - Part 4-4: Electro Magnetic Compatibility (EMC) - Test method for measuring of the screening attenuation as up to and above 3 GHz, triaxial method
IEC 60068-2-20C:1973 Third supplement - First supplement - Basic environmental testing procedures - Part 2: Tests - Test T: Soldering - Test Tb: Resistance to soldering heat, method 1
IEC 60068-2-6C:1969 Third supplement - Basic environmental testing procedures for electronic components and electronic equipment - Part 2: Tests - Test F: Vibration
IEC 60326C:1974 Third supplement - General requirements and measuring methods for printed wiring boards

Standards New Zealand

NZS 4402.6.2.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.2: Soil Strength Tests - Determination of the Compressive Strength of Specimens Tested in Undrained Triaxial Compression Test 6.2.1: Method without Measurement of Pore Water Pressure
SANZ/SAA HB 18.23:1991 Guidelines for third-party certification and accreditation - Guide 23 Methods of indicating conformity with standards for third-party certification systems

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 63281-3-2:2024 E-Transporters - Part 3-2: Performance test methods for mobility of cargo e-Transporters

IN-BIS

IS 1559 Pt.3-1982 Ferrosilicon Chemical Analysis Methods Part 3 Determination of Sulfur
IS 101 Pt.9/Sec.1-1993 Methods of sampling and test for paints, varnishes and related products. Part 9: Tests for lacquers and varnish. Section 1: Acid value (Third Revision)
IS 1216-1978 Test methods for tar and bituminous materials: Determination of solubility in carbon disulfide or trichlorethylene
IS 2720 Pt.11-1971 Soil Test Methods Part XI Determination of Shear Strength Parameters of Specimens Tested in Unconsolidated Undrained Triaxial Compression without Measurement of Pore Water Pressures
IS 2720 Pt.11-1993 Soil test methods Part 11 Determination of shear strength parameters of specimens tested in unconsolidated undrained triaxial compression without measurement of pore water pressure
IS 101 Pt.8/Sec.3-1993 Methods of sampling and test for paints, varnishes and related products. Part 8: Tests for pigments and other solids. Section 3: Ash content (Third Revision)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ASTM D6045:2024 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
BH GSO ISO 4120:2023 Sensory analysis — Methodology — Triangle test
BH GSO 142:2023 Tableware Made from Melamine Plastics and Test Methods
BH GSO ASTM E2036:2022 Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
BH GSO ISO 105-C03:2024 Textiles -- Tests for colour fastness -- Part C03: Colour fastness to washing: Test 3

IT-UNI

UNI EN ISO 4120:2021 Sensory analysis - Methodology - Triangle test

WRC - Welding Research Council

BULLETIN 299-1984 ENGINEERING ASPECTS OF CTOD FRACTURE TOUGHNESS TESTING ; THREE-DIMENSIONAL ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS OF THREE-POINT BEND SPECIMEN ; FAILURE PREDICTION OF NOTCHED PRESSURE VESSELS USING T

Society of Automotive Engineers (SAE)

SAE AS4707-1994 Test Methods Evaluation of Nonflammable@ Chlorotrifluoroethylene Base Hydraulic Fluid
SAE AS4707A-2000 Test Methods Evaluation of Nonflammable@ Chlorotrifluoroethylene Base Hydraulic Fluid
SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE AMS-STD-401-2023 Sandwich Constructions and Core Materials: General Test Methods

Danish Standards Foundation

DS/EN ISO 4120:2007 Sensory analysis - Methodology - Triangle test
DANSK DS/ISO 4120:2021 Sensory analysis – Methodology – Triangle test
DANSK DS/ISO/TS 22475-3:2008 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party
DS/ISO/TS 22475-3:2008 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party
DS/EN ISO 11334-4:1999 Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs
DANSK DS/IEC 62153-4-4:2015 Metallic communication cable test methods - Part 4-4: Electromagnetic compatibility (EMC) - Test method for measuring of the screening attenuation as up to and above 3 GHz, triaxial method
DANSK DS/EN ISO 4120:2021 Sensory analysis – Methodology – Triangle test (ISO 4120:2021)
DS/EN ISO 4120:2021 Sensory analysis – Methodology – Triangle test (ISO 4120:2021)
DANSK DS/EN ISO 10399:2018 Sensory analysis – Methodology – Duo-trio test (ISO 10399:2017)

American Petroleum Institute (API)

API RP 50A-1953 RECOMMENDED PRACTICE FOR MEASURING@ SAMPLING@ AND TESTING NATURAL GAS (THIRD EDITION)
API RP 13J-2003 Testing of Heavy Brines (Third Edition)
API MPMS 10.2-2013 Manual of Petroleum Measurement Standards Chapter 10.2 Standard Test Method for Water in Crude Oil by Distillation (THIRD EDITION)
API STD 607-1985 Fire Test for Soft-Seated Quarter-Turn Valves (THIRD EDITION)
API PUBL 2529-1975 Measuring@ Sampling@ testing and Base Conditions for Natural Gas Fluids (Third Edition)
API STD 5LX-1951 SPECIFICATION FOR HIGH-TEST LINE PIPE (THIRD EDITION)
API RP 581-2016(2020) Risk-based Inspection Methodology (Third Edition)

Association Francaise de Normalisation

NF V09-013*NF EN ISO 4120:2021 Sensory analysis - Methodology - Triangle test
NF EN ISO 4120:2021 Sensory analysis - Methodology - Triangular test
NF C97-186*NF EN 61146-2:1998 Video cameras (PAL/SECAM/NTSC). Methods of measurement. Part 2 : two- and three-sensor professional cameras.
NF G38-021-2:1995 Geotextiles. Determination of suppleness characteristics. Part 2 : three dimensional test.
NF P15-473:1995 Methods of testing cement. Part 3 : determination of setting time and soundness.

GCC Standardization Organization

GSO ISO 4120:2023 Sensory analysis — Methodology — Triangle test
GSO ASTM D2042:2021 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
GSO ISO 10399:2015 Sensory analysis -- Methodology -- Duo-trio test
GSO 142:2023 Tableware Made from Melamine Plastics and Test Methods
GSO ASTM D6045:2024 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
GSO ASTM E2036:2021 Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
GSO ISO/TS 17892-8:2013 Geotechnical investigation and testing -- Laboratory testing of soil -- Part 8: Unconsolidated undrained triaxial test

Indonesia Standards

SNI 03-6455.4-2000 Methods for measurement of discharge in open channels by triangular weirs

American National Standards Institute （ANSI)

ANSI/ASTM D3447:2000 Test Method for Purity of Trichlorotrifluoroethane
ANSI/ASTM D3444:2000 Test Method for Total Acid Number of Tricholorotriflourethane
ANSI/ASTM E2694:2016 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids

VE-FONDONORMA

NORVEN 75-5-1966 Trisector test of concrete pipes

American Water Works Association (AWWA)

AWWA ACE60071 Selecting the Right Approach to Validation Testing: Three Options and Lessons Learned
AWWA ACE95202 Triple Validation Turbidimeter: A New Approach to VLT Monitoring

AIA/NAS - Aerospace Industries Association of America Inc.

NAS1639-1981 Compressive Strength Test (Edgewise) for Sandwich Constructions (Rev 1)

CEN - European Committee for Standardization

CEN ISO/TS 22475-3:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party

CZ-CSN

CSN 21 0385-1986 Forming machines. Three-roll and four-roll bending machines. Testing methods
CSN CEN ISO/TS 17892-9:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated traxial compression tests of water-saturated soil
CSN 50 0427-1980 Pulp and páper testing. Determination of colour by CIE trichromatic systém
CSN 46 7092-2-1998 Testing methods for feeding stuffs - Part 2: Sample preparation for testing

International Telecommunication Union (ITU)

ITU-T Q.954.2-1993 Stage 3 description for multiparty supplementary services using DSS 1 : Three-party service

PL-PKN

PN C82055-02-1991 Test methods of pressed carbon products Determination of flexural strength by three-point method

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0473-811-1-3-1996*DIN EN 60811-1-3:1996 Insulating and sheathing material of electric cables - Common test methods - Part 1: General application - Section 3: Methods for determining the density, water absorption tests, shrinkage test (IEC 811-1-3:1993)
VDE 0705-2552-3 A1 E*DIN IEC 62552-3 A1:2019-01 Characteristics and test methods of household refrigerators and freezers Part 3: Energy consumption and volume
VDE 0558-530 E*DIN IEC 62040-3:2009-07 Uninterruptible power systems – Part 3: Method of specifying the performance and test requirements
VDE 0482-266-2-3-2001*DIN EN 50266-2-3:2001 Test methods for general purpose cables and isolated conductors under fire conditions - Part 2 - Chapter 3 - Test methods - Type B tests

Malaysia Standards

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 11334-4:2007 Walking aids manipulated by one arms- Requirements and test methods-Part 4 : walking sticks with three or more legs

US-FCR

FCR COE CRD-C 163-92-1992 HANDBOOK FOR CONCRETE AND CEMENT TEST METHOD FOR WATER PERMEABILITY OF CONCRETE USING TRIAXIAL CELL

The Aluminum Association

AA 3RD DOC TEST /CAS 3-2020 3rd doc testing for CAS 3 1262020

PH-BPS

PNS ASTM E1347:2021 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

VN-TCVN

TCVN 7500-2005 Bitumen.Test method for solubility in trichloroethylene

TR-TSE

TS 3030-1978 Methot For The Determination Of Chromium Trioxide (Gr203) In Glass Sand
TS 1858-1975 TRITOLYL PHOSPHATE FOR INDUSTRIAL USE - LIST OF METHODS OF TEST

European Association of Aerospace Industries

AECMA PREN 4261-3-1995 Aerospace Series Metallic Materials Rules for Drafting and Presentation of Test Method Standards Part 3 : Specific Requirements for Non-Destructive Test Method Standard Edition P1

Lithuanian Standards Office

LST EN ISO 4120:2021 Sensory analysis - Methodology - Triangle test (ISO 4120:2021)
LST EN ISO 4120:2007 Sensory analysis - Methodology - Triangle test (ISO 4120:2004)

Standards Norway

NS-EN ISO 4120:2007 Sensory analysis — Methodology — Triangle test (ISO 4120:2004)
NS-EN ISO 4120:2021 Sensory analysis — Methodology — Triangle test (ISO 4120:2021)
SN-CEN ISO/TS 22475-3:2007 Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 3: Conformity assessment of enterprises and personnel by third party (ISO/TS 22475-3:2007)

Underwriters Laboratories (UL)

UL 1897-1995 UL Standard for Safety Uplift Tests for Roof Covering Systems (Third Edition)
UL 9540A-2018 UL Standard for Safety Test Method for Evaluating Thermal Runaway Fire Propagation in Battery Energy Storage Systems (Third Edition)

YU-JUS

JUS ISO 7404-3:1992 Methods for the petrographic analysis of bituminous coal and anthracite. Part 3: Method of determining maceral group composition

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 1301.455s:1993 Methods of test for pulp and paper - Colour measurement with a diff/0 degrees geometry tristimulus reflectometer

CH-SNV

SN EN ISO 4120:2021 Sensory analysis - Methodology - Triangle test (ISO 4120:2021)