Environmental test personnel

Environmental test personnel, Total:200 items.

The international standard classification for "Environmental test personnel" includes: Medical Sciences and health care facilities in general , Aircraft and space vehicles in general , Environmental testing .

The Chinese standard classification for "Environmental test personnel" includes: Health quarantine , Aircraft and its accessories in general , Basic standards and general methods .

Group Standards of the People's Republic of China

T/SDAQI 023-2021 Test specification for environmental adaptability of unmanned aerial vehicle
T/SZUAVIA 009.4-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 4: Low temperature test
T/CEA 201-2019 Environmental conditions and environmental test methods of elevator,escalator and moving walks control system
T/SZUAVIA 009.5-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 5: High temperature test
T/AHEMA 4-2020 Specification of Skill management for staff of environmental vibration monitoring
T/GDKJ 0045-2023 Specification for evaluation of on-site environmental monitoring personne
T/AHEMA 5-2020 Specification of Skill management for staff of environmental noise monitoring
T/SZUAVIA 009.11-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 11: Rain test
T/CSCP 0025-2017 Monitoring of Environmental Factors in Water Environment Corrosion Test
T/GDEIIA 6-2020 Environmental Conditions and Test Procedures for Minitype UAV
T/CECS 1467-2023 Technical regulations for the construction of artificial environment laboratories
T/SZUAVIA 009.6-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 6: Damp heat test
T/AHEMA 9-2021 Skill Specification for staff of on-site monitoring of ecological environmental monitoring body
T/SZUAVIA 009.9-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 9: Shock test
T/CIQA 73-2024 Requirements for indoor air environment in public places where people gathered
T/SZUAVIA 009.8-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 8: Vibration test
T/SZUAVIA 009.7-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 7: Temperature variation test
T/SZUAVIA 009.12-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 12: Sand and dust test
T/CSTM 00044.8-2018 Aqueous environment corrosion test— Part 8: Monitoring method of environmental factors for corrosion tests
T/SZUAVIA 009.2-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 2: Wind resistance test
T/SZUAVIA 009.10-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 10: Salt fog test
T/AHEMA 7-2021 Classification and accreditation for staff of laboratory analysis of ecological environmental monitoring body
T/GZZH 008-2023 Standards for the management of indoor environmental pollution in crowded places
T/AHEMA 11-2021 Specification of skill management for staff of ecological environmental dioxins monitoring
T/SZUAVIA 009.3-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 3: Low pressure test
T/GZZH 009-2023 Service specifications for indoor environmental pollution control in crowded places

Professional Standard - Commodity Inspection

SN/T 5591-2023 Test method of import unmanned aerial vehicle-Environmental adaptability test
SN/T 1344-2003 Codes of health and quarantine inspection for persons entering or leaving the territory
SN/T 2097-2008 Codes for examination of monkeypox at entry-exit port
SN/T 4234-2015 Rules of inspection and quarantine for articles carried by arriving passengers

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 20643.2-2025 Specific environmental condition—Environmental test method—Part 2: Artificial environment test method and guidance—Electric and electronic products(including communication products)
GB/T 38924.2-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 2: Low-temperature test
GB/T 38924.3-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 3: High-temperature test
GB/T 38924.6-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 6: Vibration test
GB/T 20643.3-2006 Special environmental condition - Environmental test method - Part 3: Artificial environmental test method and guidance - Polymer material
GB/T 24012-1996 Guidelines for environmental auditing - Qualification criteria for evnrionmental auditors
GB/T 20643.3-2025 Special environmental condition—Environmental test method—Part 3: Artificial environmental test method and guidance—Polymer material
GB/T 38924.8-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 8: Salt spray test
GB/T 38924.11-2023 Environmental test methods for civil small and light unmanned aircraft system—Part 11: Fungus test
GB/T 38924.7-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 7: Humidity test
GB/T 38924.5-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 5: Shock test
GB/T 38924.10-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 10:Sand and dust test
GB/T 2423.41-1994 Basic environmental testing procedures for electric and electronic products Wind pressure

Professional Standard - Military and Civilian Products

WJ 2359-1995 Natural environment test methods for weapons products Climatic environment test
WJ 2358-1995 Natural environment test methods for weapons products Sea surface environment test

Professional Standard - Building Materials

JC/T 2296-2014 Comprehensive environment test method for materials and elements of building construction. Artificial radiation-damp heat test
JC/T 2295-2014 Comprehensive environment test method for materials and elements of building construction. Artificial radiation-cold test

Shandong Provincial Standard of the People's Republic of China

DB37/T 3643-2019 Technical Guidelines for Assessment of Ecological Environment Remote Sensing Monitoring Personnel Holding Certificates

Professional Standard - Energy

NB/T 11474-2023 Atmospheric corrosion test for pressure equipment materials-Atmospheric corrosion test

Professional Standard - Civil Aviation

AP-65-01-1993 Maintenance personnel license, inspection personnel license training, examination and certification
AC-65-01-1993 Maintenance personnel license, inspection personnel license training, examination and certification

Taiwan Provincial Standard of the People's Republic of China

CNS 12874-1995 Basic Environmental Testing Procedures Part 2:Tests,Test Kb:Salt Mist,Cyclic(Sodium Chloride Solution)

German Institute for Standardization

DIN SPEC 91424:2021 Ascertaining of working time of officers for environment protection and environmental management
DIN EN 60068-4:1996 Environmental testing - Part 4: Information for specification writers - Test summaries (IEC 60068-4:1987 + A1:1992 + A2:1994); German version EN 60068-4:1996
DIN EN 300019-2-1:2016 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-1: Specification of environmental tests; Storage (Endorsement of the English version EN 300 019-2-1 V2.2.1 (2014-10) as German stan
DIN EN ISO 14012:1996 Guide for environmental audits DIN qualification criteria for environmental auditors
DIN EN 300019-2-6:2004 Equipment Engineering (EE) - Evironmental conditions and environmental tests for telecommunications equipment - Part 2-6: Specification of environmental tests; Ship environments (Endorsement of the English version EN 300019-2-6 V3.0.0 (2002-12) as German
DIN EN ISO 28803:2012-06 Ergonomics of the Physical Environment - Application of international standards for people with special requirements (ISO 28803:2012); German version EN ISO 28803:2012

British Standards Institution (BSI)

BS 2011-4.4:1993*IEC 68-4:1987 Information for specification writers — Test summaries
BS DD ENV 50354:2001 Electrical arc test methods for material and garments, for use by workers at risk from exposure to an electrical arc
BS 7858:2006+A2:2009 Security screening of individuals employed in a security environment - Code of practice
BS 7858:2012 Security screening of individuals employed in a security environment. Code of practice
BS 7858:1996 Code of practice for security screening of personnel employed in a security environment
BS 8674:2025 Built environment. Framework for competence of individual fire risk assessors. Code of practice
12/30237323 DC BS 7858. Screening of individuals employed in a security environment
BS 2011-2.1T:1981 Environmental testing - Tests - Test T. Soldering
BS EN 60068-3-3:1993 Environmental testing. Guidance-Environmental testing. Miscellaneous. Guide to seismic test methods for equipment
BS EN ISO 14012:1996 Guidelines for environmental auditing. Qualification criteria for environmental auditors
BS 5173-6:1977 Methods of test for hoses-Environmental tests
BS EN ISO 12894:2001 Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments
BS 7858:2004 Security screening of individuals employed in a security environment - Code of practice
BS EN ISO 14012:1996(1998) Guidelines for environmental auditing — Qualification criteria for environmental auditors
BS EN 60068-2-2:2007 Environmental testing - Tests - Test B. Dry heat
BS EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
BS 7858:2006 Security screening of individuals employed in a security environment - Code of practice
BS 2011-2.1R:1990 Environmental testing. Tests-Test R and guidance. Water
BS EN 60068-2-1:2007 Environmental testing - Tests - Test A. Cold
BS EN 60068-2-75:2014 Environmental testing. Tests. Test Eh: Hammer tests

South African Bureau of Standard

SANS 9227:2007 Corrosion tests in artificial atmospheres - Salt spray tests

International Organization for Standardization (ISO)

ISO 9227:1990 Corrosion tests in artificial atmospheres; salt spray tests
ISO 7384:1986 Corrosion tests in artificial atmosphere; General requirements
ISO 10062:2006 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
ISO 10062:1991 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
ISO 14012:1996 Guidelines for environmental auditing - Qualification criteria for environmental auditors

Association Francaise de Normalisation

NF A05-101:2007 Corrosion tests in artificial atmospheres - Salt spray tests.
NF C20-402*NF EN 60068-4:1996 Environmental testing. Part 4 : information for specification writers. Test summaries.
NF E58-045-3:1995 Earth-moving machinery. Operator enclosure environment. Part 3 : operator enclosure pressurization test method.
NF EN ISO 12894:2001 Ergonomics of thermal environments - Medical monitoring of people exposed to extreme heat or cold
NF E58-045-4:1995 Earth-moving machinery. Operator enclosure environment. Part 4 : operator enclosure ventilation, heating and/or air-conditioning test method.
NF E58-045-2:1995 Earth-moving machinery. Operator enclosure environment. Part 2 : air filter test.
NF Z87-019-2-0*NF EN 300019-2-0:2003 Environnental Engineering (EE) - Environmental conditions and environmental tests for telecommunication equipment - Part 2-0 : Specification of environmental tests - Introduction (V2.1.2)
NF A05-107:1995 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es).
NF Z87-019-2-1:2014 Environmental engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-1 : specification of environmental tests - Storage (V2.2.1)
NF Z87-019-26*NF ETS 300019-2-6:1995 Equipment engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 2-6 : specification of environmental tests. Ship environments.
NF Z87-019-2-2:2013 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2 : specification of environmental tests - Transportation (V2.3.1)
NF C20-400:1982 Test Methods Basic Enviromental Testing Procedures Guide for application of environmental tests to electronic components
NF E58-045-5:1995 Earth-moving machinery. Operator enclosure environment. Part 5 : windscreen defrosting system test method.
NF A05-107*NF EN ISO 10062:2008 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
NF X10-800:1995 Marine environment-Oceanographic instrumentation-Guide for environmental tests
NF T40-101:1979 Rubber. Test specimen. Controlled atmospheres. Test atmospheres.

International Electrotechnical Commission (IEC)

IECEx OD 504-2022 Specification for units of competence assessment outcomes IECEx scheme for certification of personnel competence for explosive atmospheres
IEC 60068-2-60:1989 Environmental testing; part 2: tests; test Ke: corrosion tests in artificial atmosphere at very low concentration of polluting gas(es)
IECEx 05-2013 IECEx Scheme for Certification of Personnel Competence for Explosive Atmospheres - Rules of Procedure
IECEx 05-2009 IECEx scheme for certification of personnel competencies for explosive atmospheres - Rules of procedure
IECEx OD 503-2022 IECEx scheme for certification of personnel competence for explosive atmospheres - ExCB procedures for issuing and maintaining IECEx certificates of personnel competence
IEC 60068-2-30:2025 PRV Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12h+12h cycle)

European Committee for Standardization (CEN)

EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests
EA-INF/17 Register of EA resolutions for use by EA, National Accreditation Bodies and EA evaluators
EN ISO 7384:1995 Corrosion Test in Artificial Atmosphere - General Requirements (ISO 7384:1986)
EN ISO 10062:1995 Corrosion Tests in Artificial Atmosphere at Very Low Concentrations of Polluting Gas(es) (ISO 10062 : 1991)
EN ISO 10062:2022 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2022)
EN ISO 10062:2008 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006)
EN ISO 14012:1996 Guidelines for Environmental Auditing - Qualification Criteria for Environmental Auditors (ISO 14012 : 1996)

Korean Agency for Technology and Standards (KATS)

KS B ISO 10263-2-2012(2022) Earth-moving mahcinery－Operator enclosure environment－ Part 2：Air filter element test method
KS B ISO 10263-5-2022 Earth-moving machinery－Operator enclosure environment－ Part 5：Windscreen defrosting system test method
KS D ISO 7384:2003 Corrosion tests in artificial atmosphere-General requirements
KS D ISO 7384:2015 Corrosion tests in artificial atmosphere-General requirements
KS C IEC 60068-2-77-2012(2022) Environmental testing－Part 2-77：Tests－Test 77：Body strength and impact shock
KS A 14012-2003 GUIDELINES FOR ENVIRONMENTAL AUDITING -QUALIFICATION CRITERIA FOR ENVIRONMENTAL AUDITOR
KS C IEC 60068-2-44:2004 Environmental testing － Part 2: Guidance on Test T: Soldering
KS C IEC 60068-2-30-2020(2025) Environmental testing — Part 2-30: Tests — Test Db: Damp heat, cyclic(12 h + 12 h cycle)
KS C 0214-2022 Test method standard for environmental tests
KS B ISO 10263-1-2022 Earth-moving machinery － Operator enclosure environment － Part 1: Terms and definitions

Association of German Mechanical Engineers

VDI 4499 Blatt-5 E:2021-12 Digital factory – Prediction of environmental influences on the working person
VDI 6050-2015 Bewertung der Nachhaltigkeit der gebauten Umwelt - Weiterbildung von Fachleuten
VDI 6050-2017 Bewertung der Nachhaltigkeit der gebauten Umwelt - Weiterbildung von Fachleuten

Canadian Standards Association (CSA)

CSA Z305.0-2013 Safety of personnel in perioperative environments (First Edition)
CAN/CSA-ISO 14012-1996(R2003) Guidelines for environmental auditing - Qualification criteria for environmental auditors

GCC Standardization Organization

GSO ISO 14505-3:2015 Ergonomics of the thermal environment -- Evaluation of thermal environments in vehicles -- Part 3: Evaluation of thermal comfort using human subjects
GSO ISO 10263-3:2013 Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method

Institute of Environmental Sciences and Technology

IEST RP-CC027.2-2006 PERSONNEL PRACTICES AND PROCEDURES IN CLEANROOMS AND CONTROLLED ENVIRONMENTS

Society of Automotive Engineers (SAE)

SAE AS8031 Personal Protective Devices for Toxic and Irritating Atmospheres, Air Transport Crew Members

US Federal Contractor Registration (USFCR)

FCR AF R AFLC 19-8 SUPP 1-1982 ENVIRONMENTAL PROTECTION COMMITTEES AND ENVIRONMENTAL REPORTING
FCR AF I32-7005-1994 ENVIRONMENTAL PROTECTION COMMITTEES

North Atlantic Treaty Organization Standards Agency

STANAG 3827-2005 MINIMUM REQUIREMENTS FOR PHYSIOLOGICAL TRAINING OF AIRCREW IN HIGH "G" ENVIRONMENT
STANAG 6511-2016 ALLIED JOINT DOCTRINE FOR RECOVERY OF PERSONNEL IN A HOSTILE ENVIRONMENT (ED 1)
NATO AECTP-300-2006 CLIMATIC ENVIRONMENTAL TESTS
STANAG 3827-2010 "Minimum Requirements for Physiological Training of Aircrew in High ""G"" Environment (ED 5; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 555
AJP-3.7-2016 ALLIED JOINT DOCTRINE FOR RECOVERY OF PERSONNEL IN A HOSTILE ENVIRONMENT (ED A@ Ver 1)

Instituto Uruguayo de Normas Técnicas

UNIT 200:2025 Accessibility of people to the physical environment - Design criteria and general requirements for an accessible built environment

Danish Standards Foundation

DS/ETS 300019-2-6:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-6:Specification of environmental tests - Ship environments
DS/EN 300019-2-6 V3.0.0:2004 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments
DS/IEC 68-2-1:1991 Environmental testing. Part 2: Tests. Test A: Cold
DS/EN 300019-2-1 V2.1.2:2001 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage
DS/ETS 300019-2-0:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-0:Specification of environmental tests - Introduction
DS/ETS 300019-2-2:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2:Specification of environmental tests - Transportation
DS/ETS 300019-2-1:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-1:Specification of environmental tests - Storage

Gosstandart of Russia

GOST R 50804-1995 Cosmonaut's habitable environments on board of manned spacecraft. General medicotechnical requirements
GOST R ISO 14012-1998 Guidelines for environmental auditing. Qualification criteria for environmental auditors
GOST R 71238-2024 Suspended cableways for transportation of people. Single-rope ring cableways. Test methods

Lithuanian Standards Office

LST EN 300 019-2-6 V3.0.0-2005 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments
LST EN 300 019-2-6 V2.1.2-2005 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments
LST EN 300 019-2-1 V2.1.2-2005 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage
LST ETS 300 019-2-6 Leid.1-2005 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments

American Society for Testing and Materials (ASTM)

ASTM F520-16 Standard Test Method for Environmental Resistance of Aerospace Transparencies to Artificially Induced Exposures
ASTM F3028-24 Standard Guide for Training of Search and Rescue Personnel Operating in the Alpine Environment (Alpine Endorsement)

Standard Association of Australia （SAA）

AS 60068.2.2:2003 Environmental testing - Tests - Test B: Dry heat
AS 60068.2.20:2004 Environmental testing - Tests - Test T: Soldering
AS 60068.2.11:2003 Environmental testing - Tests - Test Ka: Salt mist
AS 2252.1:2002 Biological safety cabinets - Biological safety cabinets (Class I) for personnel and environment protection
AS 2252.1:1994 Biological safety cabinets - Biological safety cabinets (Class I) for personnel and environment protection
AS 60068.2.75:2003 Environmental testing - Tests - Test Eh: Hammer tests
AS 60068.2.44:2004 Environmental testing - Tests - Guidance on test T: Soldering
AS 60068.2.1:2003 Environmental testing - Tests - Test A: Cold
AS 60068.2.78:2003 Environmental testing - Tests - Test Cab: Damp heat, steady state
AS 60068.2.68:2003 Environmental testing - Tests - Test L: Dust and sand

Spanish Association for Standardization (UNE)

UNE 115230-3:1999 EARTH-MOVING MACHINERY. OPERATOR ENCLOSURE ENVIRONMENT. PART 3: OPERATOR ENCLOSURE PRESSURIZATION TEST METHOD.
UNE-ISO 10263-3:2010 Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method
UNE-EN 300019-2-6 V3.1.1:2023 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2: Specification of environmental tests; Sub-part 6: Ship environments (Endorsed by Asociación Española de Normalización in Decem...

Association for Electrical, Electronic & Information Technologies (VDE)

VDE-AR-E 2757-5-2015 Technikunterstuetztes Leben - Ambient Assisted Living (AAL) - Anforderungen an die Qualifizierung der im AAL-Bereich Taetigen

European Telecommunications Standards Institute (ETSI)

ETSI EN 300 019-2-6-2023 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2: Specification of environmental tests; Sub-part 6: Ship environments
ETSI EN 300 019-2-1:2014 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage (V2.2.1)
ETSI EN 300 019-2-1:2017 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage (V2.2.8)
ETSI EN 300 019-2-1-2014 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage (V2.2.1)
ETSI ETS 300 019-2-6 ed.1 (1994-05)-1994 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments
ETSI EN 300 019-2-0-2022 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2: Specification of environmental tests; Sub-part 0: Introduction

Military Standards (MIL-STD)

MIL MIL-STD-810B Notice 3-1970 Environmental Test Methods
MIL MIL-STD-810B Notice 1-1969 ENVIRONMENTAL TEST METHODS
MIL MIL-STD-810B-1967 Environmental test methods

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS ISO 14012(Int):1995 Guidelines for environmental auditing - Qualification criteria for environmental auditors
AS/NZS ISO 14012:1996 Guidelines for environmental auditing - Qualification criteria for environmental auditors

Bureau of Indian Standards

IS/ISO 14012-1996 Guidelines for environmental auditing - Qualification criteria for environmental auditors
IS 9001-19-2006 Guidance for environmental testing-19 Salt Mist test

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 10263-3:2013 Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 10263-3:2016 Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE REFRIGERATION IP CH 37-1998 Environmental Test Facilities
ASHRAE REFRIGERATION IP CH 37-2002 Environmental Test Facilities
ASHRAE REFRIGERATION SI CH 37-1998 Environmental Test Facilities
ASHRAE REFRIGERATION SI CH 37-2002 Environmental Test Facilities
ASHRAE REFRIGERATION IP CH 36-1994 Environmental Test Facilities
ASHRAE REFRIGERATION SI CH 36-1994 Environmental Test Facilities

American Association of State Highway and Transportation Officials

AASHTO ESC-2004 AASHTO Center for Environmental Excellence - Best Practices in Environmental Stewardship Competition Revision 1

Det Norske Veritas (DNV)

DNV-CG-0339-2021 Environmental test specifications

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1232-2002 Artificial intelligence exchange and service tie to all test environments (AI-ESTATE)

American National Standards Institute （ANSI)

ANSI/NETA ETT-2010 Certification of Electrical Testing Technicians (ETT)

European Committee for Electrotechnical Standardization（CENELEC）

EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests

Standards New Zealand

SNZ HB 44-2001 Subdivision for People and the Environment
SNZ HB 44:2001 Subdivision for people and the environment

National Standardisation Body (ASRO)

STAS 8393/29-1987 Environmental testing procedures SALT MIST, CYCLIC Test Kb

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 7699-2-30-2007 Environmental testing.Part 2-30: Tests.Test A: Damp heat, cyclic (12h+12h cycle)