plastic electrode

plastic electrode, Total:222 items.

The international standard classification for "plastic electrode" includes: Rolling bearings , Water for industrial use , Plastics in general , Water quality , Thermoplastic materials , Other non-ferrous metals and their alloys , Nickel, chromium and their alloys , Paints and varnishes , Cables .

The Chinese standard classification for "plastic electrode" includes: Sliding bearing , Chemical reagent in general , Boiler and its auxiliary equipment , Basic standards and general methods for synthetic resin and plastic , Analysis methods for toxic substances in water , Precious metals and their alloys , Heavy metals and their alloys , Coating , Special electronic technology material , Electrician alloy parts , Technical management , Cable and its accessory .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7484-1987 quality - Determination of fluoride - Ion selective electrode method
GB/T 9352-2008 Plastic - Compression moulding of test specimens of thermoplastic materials
GB/T 7142-2002 Determination of time-temperature limits for plastics after prolonged exposure to heat
GB/T 6904.3-1993 Analysis of water used in boiler and cooling system. Determination of pH. The glass electrode method for pure water
GB/T 6904.1-1986 Methods for analysis of water for boiler and for cooling; The determination of pH; The glass electrode method
GB 7948-1987 Test method for PV limit of plastics bearings
GB/T 7948-2024 Limit PV test method for plastic sleeves of sliding bearings
GB/T 7948-1987 Test method for PV limit of plastics bearings

Professional Standard - Non-ferrous Metal

YS/T 611-2006 Electrode paste used for PTC ceramic
YS/T 609-2023 Platinum electrode paste
YS/T 609-2006 Platinum electrode paste
YS/T 584-2006 Chromium bronzes and zirconium bronzes bars and rods for electrode material

Professional Standard - Chemical Industry

HG/T 3952-2007 Cathodic electrodeposition coatings

Professional Standard - Forestry

LY/T 1414-1999 Laminated wood plastics - Compreg - Determination of extreme moisture content
LY/T 1415-1999 Laminated wood plastics - Compreg - Determination of extreme volume expansion

Group Standards of the People's Republic of China

T/GDPIA 66-2023 Recycled Plastics—Thermoplastic cross-linked polyethylene from cable for wood-plastic composites
T/CPCIF 0169-2021 Recycling products from lithium-ion battery wastes— Selected electrode material powder
T/QGCML 306-2022 Cathode material for sodium ion battery
T/SXS 019-2023 Fuel cell bipolar plate technology
T/NAIA 0172-2022 Lithium-ion battery silicon carbon anode material
T/CEMIA 027-2022 Specification for back electrode paste for use in chip resistors
T/SGX 018-2023 Recycled Plastics—Thermoplastic cross-linked polyethylene from cable for wood-plastic composites
T/CASME 1615-2024 Prime-top in one cathodic electro-deposition coating
T/CEMIA 028-2022 Specification for surface electrode paste for use in chip resistors
T/QGCML 308-2022 Sodium ion battery anode material
T/JSQA 189-2024 Discharge valve for new energy lithium battery slurry
T/CSHB 0018-2024 Technical specification of carbon-plastic composite bipolar plates for all-vanadium liquid flow batteries

工业和信息化部

YS/T 584-2018 Chromium copper and zirconium copper rod and bar for electrode material
SJ/T 11792-2022 Test method for conductivity of electrode materials used in lithium ion battery
YS/T 1515-2021 Aluminum alloy electrode materials for aluminum-air fuel cells
YS/T 1097-2016 Chromium copper and zirconium copper wire for electrode materials

Professional Standard - Machinery

JB/T 12147-2015 Plastic cable support system
JB/T 4281-1999 Welding-materials for resistance welding electrodes and ancillary equipment

Professional Standard - Electron

SJ 20601-1996 Specification for terminating paste for use in MLC

Professional Standard - Automobile

QCn 29017-1991 Limit deviations of untolerated dimensions for automotive molded plastic parts
QC/T 29017-2023 Permissible automotive molded plastic parts variations in dimensions without tolerance indication
QC/T 29017-1991 Automotive molded plastic parts without individual tolerance limit the size of the deviation

Professional Standard - Military and Civilian Products

WJ 2669-2005 Specification for cathodic electrophoretic coatings for bombs

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 9330-2020 Plastic insulated control cables

SCC

BS PD ISO/TS 4767:2024 Plastics. Method of exposure to electrodeless plasma radiation sources
DANSK DS/ISO 3915:2022 Plastics – Measurement of resistivity of conductive plastics
DANSK DS/EN ISO 3915:1999 Plastics – Measurement of resistivity of conductive plastics
MIL MIL-DTL-55446D-2011 Cables, Telephone, Switchboard: Plastic Insulated, Plastic Jacketed
NS-EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
AENOR UNE-EN ISO 3915:2000 PLASTICS - MEASUREMENT OF RESISTIVITY OF CONDUCTIVE PLASTICS (ISO 3915:1981)
NS-EN ISO 3915:1999 Plastics — Measurement of resistivity of conductive plastics (ISO 3915:1981)
AENOR UNE 53031:1974 Plastic materials. Determination of the surface electrical resistance of thermostable plastic materials.
AENOR UNE 53032:1974 Plastic materials. Determination of the resistance and transverse resistivity of thermoset plastic materials.
MIL MIL-C-55446A-1968 CABLES, TELEPHONE, SWITCHBOARD: PLASTIC INSULATED, PLASTIC JACKETED (SUPERSEDING MIL-C-55446)
MIL MIL-DTL-55446C-2006 CABLES, TELEPHONE, SWITCHBOARD: PLASTIC INSULATED, PLASTIC JACKETED(SUPERSEDING MIL-DTL-55446B)
NS 2971:2006 Cover plates of thermoplastics for cables
BS ISO 5182:2008 Resistance welding. Materials for electrodes and ancillary equipment
DANSK DS/EN ISO 5182:2016 Resistance welding – Materials for electrodes and ancillary equipment
CEI EN IEC 61076-8-102:2021 Connectors for electrical and electronic equipment - Product requirements Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A
DANSK DS/EN IEC 61076-8-100:2020 Connectors for electrical and electronic equipment – Product requirements – Part 8-100: Power connectors – Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A...
CEI EN IEC 61076-8-100:2020 Connectors for electrical and electronic equipment - Product requirements Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A
CEI EN IEC 61076-8-101:2020 Connectors for electrical and electronic equipment - Product requirements Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A
DANSK DS/EN IEC 61076-8-101:2020 Connectors for electrical and electronic equipment – Product requirements – Part 8-101: Power connectors – Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A...
BS ISO 27588:2008 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
DANSK DS/EN IEC 61076-8-102:2020 Connectors for electrical and electronic equipment – Product requirements – Part 8-102: Power connectors – Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A...
BS 5734-2:1980 Polyester moulding compounds for electrical and other purposes-Specification for dough moulding compounds for electrical purposes
AENOR UNE 53122:1964 PLASTIC MATERIALS. ELECTRICAL RESISTIVITY OF A SHEATH OF FLEXIBLE PLASTIC MATERIAL, FOR THE PROTECTION OF ELECTRICAL CONDUCTORS

VE-FONDONORMA

COVENIN 397-1976 Unipolar insulated metal wire with thermoplastic for 600 Volts

CH-SNV

VSM 18725.2-1965 Determination of time and temperature limits after long-term thermal exposure of plastics
SN ISO 9003:1988 Quality Systems - Model for quality assurance in final inspection and test

International Organization for Standardization (ISO)

ISO/CD TS 4767:2023 Plastics - Method of exposure to electrodeless plasma radiation sources
ISO/DTS 4767:2023 Plastics - Method of exposure to electrodeless plasma radiation sources
ISO 3915:1981 Plastics; measurement of resistivity of conductive plastics
ISO 3915:2022 Plastics — Measurement of resistivity of conductive plastics
ISO 1628-4:1986 Plastics; Determination of viscosity number and limiting viscosity number; Part 4 : Polycarbonate (PC) moulding and extrusion materials
ISO 13975:2019 Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production
ISO 2578:1974 Plastics — Determination of time-temperature limits after exposure to prolonged action of heat
ISO 5182:1978 Materials for resistance welding electrodes and ancillary equipment
ISO 2578:1993 Plastics; determination of time-temperature limits after prolonged exposure to heat
ISO 294:1975 Plastics; Injection moulding test specimens of thermoplastic materials
ISO 2112:1977 Plastics — Aminoplastic moulding materials — Specification
ISO 5182:1991 Welding; materials for resistance welding electrodes and ancillary equipment
ISO 5182:2016 Resistance welding - Materials for electrodes and ancillary equipment
ISO 5182:2008 Resistance welding - Materials for electrodes and ancillary equipment
ISO 294:1995 Plastics - Injection moulding of test specimens of thermoplastic materials

KR-KS

KS M ISO TS 4767-2024 Plastics — Test method for laboratory light exposure using electrodeless plasma lamps
KS M ISO 2578-2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS D ISO 5182-2021 Resistance Welding — Materials for electrodes and ancillary equipment

RU-GOST R

GOST 25209-1982 Plastics and polymer films. Methods for the determination of surface charges of electrets
GOST 16442-1980 Plastic-insulated power cables. Specifications

British Standards Institution (BSI)

PD ISO/TS 4767:2024 Plastics — Method of exposure to electrodeless plasma radiation sources
BS EN ISO 3915:2022 Plastics. Measurement of resistivity of conductive plastics
BS EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
21/30427395 DC BS EN ISO 3915. Plastics. Measurement of resistivity of conductive plastics
BS EN IEC 61076-8-102:2020 Connectors for electrical and electronic equipment. Product requirements - Power connectors. Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A
BS EN IEC 61076-8-101:2020 Connectors for electrical and electronic equipment. Product requirements - Power connectors. Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A
BS EN IEC 61076-8-100:2020 Connectors for electrical and electronic equipment. Product requirements - Power connectors. Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A
BS EN ISO 5182:2016 Resistance welding. Materials for electrodes and ancillary equipment

United States Navy

NAVY QPL-24519-2010 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-31 NOTICE 1-2008 Molding Plastics, Electrical, Thermoplastic
NAVY QPL-24519-2013 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-31-2005 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-QPD-2010 Molding Plastics, Electrical, Thermoplastic

German Institute for Standardization

DIN 40734:1999-05 Lead acid batteries - Stationary vented cells with positive grid plates - Cells in plastic containers; rated capacities, main dimensions, weights
DIN EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999
DIN EN ISO 3915:2022-05 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022); German version EN ISO 3915:2022
DIN 40736-1:2015-09 Lead acid batteries - Part 1: Stationary vented cells with positive tubular plates in plastic-containers
DIN EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021); German and English version prEN ISO 3915:2021
DIN 40734:1999 Lead acid batteries - Stationary vented cells with positive grid plates - Cells in plastic containers; rated capacities, main dimensions, weights
DIN CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics; German version CEN/TS 13130-17:2005
DIN 40771-1:2013 Vented nickel-cadmium-accumulators.Part 1: Cells in plastic containers with pocket type plates.Rated capacities.Main dimensions
DIN 40736-1:2015 Lead acid batteries - Part 1: Stationary vented cells with positive tubular plates in plastic-containers
DIN EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
DIN 40736-1:1992 Lead acid batteries; stationary cells with positive tubular plates; cells in plastic-containers; rated capacities, main dimensions, weights
DIN 40736-1 E:2012-10 Lead acid batteries; stationary cells with positive tubular plates; cells in plastic-containers; rated capacities, main dimensions, weights
DIN CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics; German version CEN/TS 13130-20:2005
DIN 40771-3:1985 Nickel-cadmium-accumulators; cells with pocket plates; cells in steel and plastic containers; types of installation, dimensions
DIN EN 12118:1997 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
DIN CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics; German version CEN/TS 13130-22:2005
DIN EN ISO 5182 E:2015-03 Resistance welding electrode materials and auxiliary equipment (draft)

South African Bureau of Standard

SANS 5852:2008 Plastic limit and plasticity index of fines in aggregates for base-courses

NO-SN

NS 8003-1982 Geotechnical testing - Laboratory methods - Plastic limit
NS 2971-2006 Cover plates of themoplastics for cables

CZ-CSN

CSN 64 0006-1974 Plastics. Tolerances and limit deviations on dimensions of products made of plastics

Association Francaise de Normalisation

NF T51-080:1984 PLASTICS. DETERMINATION OF THE RESISTIVITY OF CONDUCTIVE PLASTICS.
NF T51-080*NF EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics
NF T51-080:1999 Plastics. Measurement of resistivity of conductive plastics.
NF T54-078:1992 Plastics. Polyethylene (pe) for plastics piping systems. Determination of the limiting stress intensity factor. Test method.
NF A82-100*NF EN ISO 5182:2016 Resistance welding - Materials for electrodes and ancillary equipment
NF EN ISO 5182:2016 Soudage par résistance - Matériaux pour électrodes et équipements annexes
NF C93-406-8-101*NF EN 61076-8-101:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-101 : power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A
NF C93-406-8-100*NF EN 61076-8-100:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-100 : power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A
NF C93-406-8-102*NF EN IEC 61076-8-102:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-102 : power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A
NF T51-225*NF EN ISO 2578:1998 Plastics. Determination of time-temperature limits after prolonged exposure to heat.
NF A82-100:2009 Resistance welding - Materials for electrodes and ancillary equipment.
NF T54-935*NF EN 12118:1997 Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.

GSO

GSO ISO 3915:2013 Plastics - Measurement of resistivity of conductive plastics
GSO ISO 3915:2024 Plastics — Measurement of resistivity of conductive plastics
OS GSO ISO 3915:2013 Plastics - Measurement of resistivity of conductive plastics
OS GSO ISO 5182:2010 Resistance welding -- Materials for electrodes and ancillary equipment
GSO ISO 5182:2010 Resistance welding -- Materials for electrodes and ancillary equipment

Korean Agency for Technology and Standards (KATS)

KS M ISO 3915-2002(2017) Plastics－Measurement of resistivity of conductive plastics
KS M ISO 3915-2002(2022) Plastics－Measurement of resistivity of conductive plastics
KS M ISO 3915-2023 Plastics — Measurement of resistivity of conductive plastics
KS M ISO 3915:2002 Plastics-Measurement of resistivity of conductive plastics
KS B 7069-2013 Plastic cable duct
KS B 7069-2002 Plastic cable duct
KS M ISO 2578:2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS B ISO 24598:2008 Welding consumables-Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels-Classification
KS B 7069-2002(2012) Plastic cable duct
KS D ISO 5182:2021 Resistance Welding — Materials for electrodes and ancillary equipment
KS L 9103-1996 Testing method for solderberg paste
KS D 8343-1990 Electroplated coatings on plastics materials for decorative purposes
KS D 8343-2008 Electroplated coatings on plastics materials for decorative purposes
KS D 8343-2013 Electroplated coatings on plastics materials for decorative purposes
KS C 6426-1984(2000) AC MAINS SUPPLY PLASTIC FILM CAPACITORS
KS C ISO 5182-2008 Welding－Materials for resistance welding electrodes and ancillary equipment
KS I 3306-2014 Recycled plastics telecommunication manhole
KS C 6426-1984 AC MAINS SUPPLY PLASTIC FILM CAPACITORS

CO-ICONTEC

ICONTEC 1332-1981 Electronics. Unipolar conductors insulated by thermoplastic material PVC, special type

CU-NC

NC 66-14-1987 Electronic and Electrotechnical Industry. Plastic-Encapsulated Bipolar Transistors. General Quality Specifications

European Committee for Standardization (CEN)

EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
EN ISO 3915:1999 Plastics - Measurement of Resistivity of Conductive Plastics
prEN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021)
EN ISO 5182:2009 Resistance welding - Materials for electrodes and ancillary equipment
EN ISO 2578:1998 Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat
EN 1227:1997 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Long-Term Ultimate Relative Ring Deflection under Wet Conditions

Spanish Association for Standardization (UNE)

UNE-EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
UNE-EN ISO 3915:2000 PLASTICS - MEASUREMENT OF RESISTIVITY OF CONDUCTIVE PLASTICS (ISO 3915:1981)
UNE 53031:1974 PLASTICS MATERIALS. DETERMINATION OF SUPERFICIAL RESISTANCE OF THERMOSETTING PLASTICS MATERIALS
UNE 53032:1974 PLASTICS. DETERMINATION OF RESISTANCE AND TRANSVERSAL RESISTIVITY OF THERMOSETTING PLASTICS
UNE-EN ISO 5182:2017 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016)
UNE-EN IEC 61076-8-100:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A ...
UNE-EN IEC 61076-8-102:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A...
UNE-EN IEC 61076-8-101:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A ...
UNE 103104:1993 TEST FOR PLASTIC LIMIT OF A SOIL.

Danish Standards Foundation

DS/EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
DS/EN ISO 5182:2009 Resistance welding - Materials for electrodes and ancillary equipment
DS/EN ISO 2578:1999 Plastics - Determination of time-temperature limits after prolonged exposure to heat

Defense Logistics Agency

DLA MIL-DTL-55446 D-2011 CABLES, TELEPHONE, SWITCHBOARD: PLASTIC INSULATED, PLASTIC JACKETED
DLA QPL-8971-10-2004 ELECTRODES, GRAPHITE, SPECTROMETRIC GRADE

DIN

DIN EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)

Lithuanian Standards Office

LST EN ISO 3915:2001 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981)

AT-ON

OENORM EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021)

HU-MSZT

MSZ 1176-1958 Plastic power supply, 750V
MSZ 1175-1958 Plastic power cable, 380 V
MSZ 7768-1963 Electrical Insulating Plastic Foil Inspection

General Motors Corporation (GM)

GM 9984819-2005 Conductive Prep Coat For Plastics

Association of German Mechanical Engineers

DVS 2205-1 Beiblatt 19-2008 Calculated thermal aging limits of PE for containers and equipment made of thermoplastics
DVS 0911-1996 Tungsten electrode for tungsten inert gas shielded welding-application-technical information

Japanese Industrial Standards Committee (JISC)

JIS Z 3234:1999 Copper alloys for resistance welding electrode
JIS Z 3234:1992 Copper alloys for resistance welding electrode
JIS Z 3234:2021 Materials for resistance welding electrodes and ancillary equipment
JIS Z 3322:1996 Materials for stainless steel overlay welding with strip electrode
JIS K 7226:1998 Plastics -- Determination of time-temperature limits after prolonged exposure to heat
JIS A 1205:1999 Test method for liquid limit and plastic limit of soils
JIS A 1205:2009 Test method for liquid limit and plastic limit of soils
JIS H 8630:1987 Electroplated coatings on plastics materials for decorative purposes
JIS H 8630:2006 Electroplated coatings on plastics materials for decorative purposes

RO-ASRO

STAS SR ISO 3915:1981 Plastics. Measurement of resistivity of conductive plastics
STAS 11102-1978 CARBONACEOUS MASS FOR CONTINUOUS ELECTRODES Plasticity determination
STAS 1913/4-1986 Foundation ground DETERMINATION OF PLASTIC LIMITS

(U.S.) Ford Automotive Standards

FORD ESB-M4D317-A-1985 POLYVINYL CHLORIDE, INJECTION MOLDING COMPOUND, ELECTRICAL GRADE

PL-PKN

PN C97014-1969 Raw materials for elecfrode industry Pilch coke
PN-EN IEC 61076-8-100-2021-01 E Connectors for electrical and electronic equipment -- Product requirements -- Part 8-100: Power connectors -- Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A
PN-EN IEC 61076-8-102-2021-01 E Connectors for electrical and electronic equipment -- Product requirements -- Part 8-102: Power connectors -- Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A
PN-EN IEC 61076-8-101-2021-01 E Connectors for electrical and electronic equipment -- Product requirements -- Part 8-101: Power connectors -- Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A

American Society for Testing and Materials (ASTM)

ASTM D4318-10e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-05 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-00 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM B727-04(2009) Standard Practice for Preparation of Plastics Materials for Electroplating
ASTM B532-85(1997) Standard Specification for Appearance of Electroplated Plastic Surfaces
ASTM B532-85(2007) Standard Specification for Appearance of Electroplated Plastic Surfaces

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 61076-8-100:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A
EN IEC 61076-8-102:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A
EN IEC 61076-8-101:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A

International Electrotechnical Commission (IEC)

IEC 61076-8-100:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connec
IEC 61076-8-101:2020 Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connec

SE-SIS

SIS SS 02 71 21-1990 Geotechnical tests — Plastic limit
SIS SS-ISO 5182:1983 Materials for resistance welding elec- trodes and ancillary equipment
SIS SS 424 02 62-1979 Rubber and thermoplastic insulated cords and cables — Lift cables — Testing