dynamic gas mixing

dynamic gas mixing, Total:360 items.

The international standard classification for "dynamic gas mixing" includes: Gases for industrial application , Chemical analysis , Measurement of volume, mass, density, viscosity , Anaesthetic, respiratory and reanimation equipment .

The Chinese standard classification for "dynamic gas mixing" includes: Industrial gas and chemical gas , Optical instrument in general , Surgery devices .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5275.5-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 5:Capillary calibration devices
GB/T 5275.2-2022 Gas analysis—Preparation of calibration gas mixtures using dynamic methods—Part 2: Piston pumps
GB/T 5275.6-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 6:Gritical orifices
GB/T 10248-2005 Gas analysis—Preparation of calibration gas mixtures—Static volumetric methods
GB/T 5275.4-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 4:Continuous syringe injection method
GB/T 10627-1989 Gas analysis--Preparation of calibration gas mixtures--Static volumetric methods
GB/T 5275.6-2023 Gas analysis―Preparation of calibration gas mixtures using dynamic methods―Part 6:Critical flow orifices
GB/T 5275.10-2009 Gas analysis—Preparation of calibration gas mixtures using dynamic volumetric methods—Part 10:Permeation method
GB/T 5275.1-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 1:Methods of calibration
GB/T 5275.7-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 7:Thermal mass-flow controllers
GB/T 5275.8-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 8:Diffusion method
GB/T 10248-1988 Gas analysis--Preparation of calibration gas mixtures--Static volumetric methods
GB/T 5275.2-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 2: Volumetric pumps
GB/T 5275.9-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 9:Saturation method
GB/T 5275.11-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 11:Electrochemical generation

Professional Standard - Agriculture

GB/T 5275.1-2024 Gas analysis—Preparation of calibration gas mixtures using dynamic methods—Part 1:General aspects

Hebei Provincial Standard of the People's Republic of China

DB13/T 3007-2017 Mixed gas cylinder filling regulations

Group Standards of the People's Republic of China

T/CUWA 60053-2022 Tube Dynamic Mixer

Professional Standard - Medicine

YY/T 0893-2013 Gas mixers for medical use―Stand-alone gas mixers
YY 0893-2013 Gas mixers for medical use―Stand-alone gas mixers
YY/T 0893-2023 Gas mixers for medical use - Standalone gas mixers

Taiwan Provincial Standard of the People's Republic of China

CNS 14963-2005 Gas mixers for medical use - Stand-alone gas mixers

Professional Standard - Chemical Industry

HG/T 2975-1989 Gas analysis. Calibration gas mixtures. Certificate of mixture preparation

SCC

VDI 3490 BLATT 6-1988 Measuring gases; Test gases; Dynamic production with gas mixing pumps
VDI 3490 BLATT 6-1988 Measuring gases; Test gases; Dynamic production with gas mixing pumps
BS 4559-8:1985 Methods for preparation of calibration gas mixtures-Mass dynamic method
BS ISO 6145-10:2002 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Permeation method
BS ISO 6145-8:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Diffusion method
BS ISO 6145-9:2009 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Saturation method
BS ISO 6145-1:2003 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration
BS ISO 6145-9:2001 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods-Saturation method
BS ISO 6145-6:2003 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Critical orifices
BS 4559-5.3:1987 Methods for preparation of calibration gas mixtures. Dynamic volumetric methods-Periodic injections into a flowing gas stream
BS ISO 6145-11:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Electrochemical generation
AENOR UNE 77243-3:2001 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 3: Periodic injections into a gas stream.
DIN 51898-2:2017 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 2: Preparation from gas mixtures
BS ISO 6144:2003 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
DANSK DS/EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
DANSK DS/EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
DANSK DS/EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method
DANSK DS/EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method
DANSK DS/ISO 6145-1:2019 Gas analysis – Preparation of calibration gas mixtures using dynamic methods – Part 1: General aspects
BS ISO 6145-5:2001 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods-Capillary calibration devices
BS ISO 6145-5:2009 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Capillary calibration devices
BS 4559-5.6:1987 Methods for preparation of calibration gas mixtures. Dynamic volumetric methods-Sonic orifices
DIN 51898-2 E:2016 Draft Document - Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 2: Preparation from gas mixtures
BS ISO 6145-7:2001 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods-Thermal mass-flow controllers
DANSK DS/EN ISO 6145-6:2008 Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 6: Critical orifices
BS ISO 6145-4:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Continuous syringe injection method
BS 4559-5.4:1987 Methods for preparation of calibration gas mixtures. Dynamic volumetric methods-Continuous injection method
DANSK DS/EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
NS-EN ISO 6144:2006 Gas analysis — Preparation of calibration gas mixtures — Static volumetric method (ISO 6144:2003)
BS 4559-5.1:1987 Methods for preparation of calibration gas mixtures. Dynamic volumetric methods-Review of methods of calibration
08/30180068 DC BS ISO 6145-9. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 9. Saturation method
DANSK DS/EN ISO 6145-1:2019 Gas analysis – Preparation of calibration gas mixtures using dynamic methods – Part 1: General aspects (ISO 6145-1:2019)
AAMI/ISO 11195:1995 Gas Mixers for Medical Use-Stand-alone Gas Mixers
CAN/CSA-ISO 11195-2019 Gas mixers for medical use - Stand-alone gas mixers
DANSK DS/EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
BS ISO 11195:1995 Gas mixers for medical use. Stand-alone gas mixers
NS-EN ISO 6145-8:2008 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 8: Diffusion method (ISO 6145-8:2005)
NS-EN ISO 6145-1:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
NS-EN ISO 6145-10:2008 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method (ISO 6145-10:2002)
NS-EN ISO 6145-9:2010 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method (ISO 6145-9:2009)
DANSK DS/ISO 11195:2018 Gas mixers for medical use – Stand-alone gas mixers
BS 4559-3:1983 Methods for preparation of calibration gas mixtures-Static volumetric methods
VDI 2468 BLATT 10-1995 Measuring gaseous emissions — producing hydrogen peroxide test gas
NS-EN ISO 6145-6:2008 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 6: Critical orifices (ISO 6145-6:2003)
NS-EN 720-2:1996 Transportable gas cylinders — Gases and gas mixtures — Part 2: Determination of flammability and oxidizing ability of gases and gas mixtures
DANSK DS/EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method
DIN EN ISO 6145-9 E:2010 Draft Document - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009); German version FprEN ISO 6145-9:2010
NS-EN ISO 6145-11:2008 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11: Electrochemical generation (ISO 6145-11:2005)
NS-EN ISO 6145-6:2017 Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 6: Critical flow orifices (ISO 6145-6:2017)
AENOR UNE-EN ISO 6145-6:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
08/30184727 DC BS ISO 6145-5. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 5. Capillary calibration devices
DIN EN ISO 6145-1 E:2018 Draft Document - Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO/DIS 6145-1:2018); German and English version prEN ISO 6145-1:2018
BS EN ISO 10156-2:2005 Gas cylinders. Gases and gas mixtures-Determination of oxidizing ability of toxic and corrosive gases and gas mixtures
DANSK DS/EN ISO 6145-7:2019 Gas analysis – Preparation of calibration gas mixtures using dynamic methods – Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
07/30171422 DC BS ISO 6145-7. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 7. Thermal mass flow controllers
VDI 3490 BLATT 12-1988 Measuring gases; test gases; production of test gases by manometric methods
MIL MIL-PRF-71185-1999 DYNAMIC REFERENCE UNIT HYBRID (DRUH)
NS-EN ISO 6145-7:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
NS-EN ISO 6145-5:2010 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 5: Capillary calibration devices (ISO 6145-5:2009)
NS-EN ISO 6145-7:2010 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
NS-EN ISO 6145-4:2008 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 4: Continuous syringe injection method (ISO 6145-4:2004)
DIN EN ISO 6145-6 E:2016 Draft Document - Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO/DIS 6145-6:2016); German and English version prEN ISO 6145-6:2016

CZ-CSN

CSN ISO 7395:1993 Gas analysis. Preparation of calibration gas mixtures. Masss dynamic method
CSN 38 5551-1987 Gaseous fuels. Certificate of calibration gas mixture
CSN ISO 6145-3:1994 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 3: Periodic injections into a flowing gas stream
CSN ISO 6144:1993 Gas analysis. Preparation of calibration gas mixtures. Static volumetric methods
CSN ISO 6145-1:1994 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods
CSN ISO 6145/4:1993 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 4: Continuous injection method

Association Francaise de Normalisation

NF X20-211:1983 Gas analysis. Preparation of calibration gas mixtures. Mass dynamic method.
NF X20-204:1974 Gas analysis. Method for the dynamic preparation of gas mixtures for calibration by proportioning piston pumps.
NF X20-205-9*NF EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9 : saturation method
NF X20-203*NF EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method.
NF X20-205-8*NF EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8 : diffusion method.
NF X20-212:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 1 : methods of calibration.
NF X20-205-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1 : methods of calibration.
NF X20-205-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6 : critical orifices.
NF X20-205-10*NF EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10 : permeation method
NF X20-217:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 6 : sonic orifices.
NF X20-214:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 3 : periodic injections into a flowing gas stream.
NF EN ISO 6144:2006 Gas analysis - Preparation of gas mixtures for calibration - Static volumetric method
NF X20-205-6*NF EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6 : critical flow orifices
NF X20-205-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7 : thermal mass-flow controllers.
NF X20-205-5*NF EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5 : capillary calibration devices
NF EN ISO 6145-10:2008 Gas analysis - Preparation of gas mixtures for calibration using dynamic volumetric methods - Part 10: permeation method
NF EN ISO 6145-8:2008 Gas analysis - Preparation of gas mixtures for calibration using dynamic volumetric methods - Part 8: diffusion method
NF EN ISO 6145-9:2011 Gas analysis - Preparation of gas mixtures for calibration using dynamic volumetric methods - Part 9: saturation method
NF X20-205-11*NF EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11 : electrochemical generation.
NF X20-215:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 4 : continuous injection method.
NF EN ISO 6145-1:2019 Gas analysis - Preparation of gas mixtures for calibration using dynamic methods - Part 1: general aspects
NF X20-201:1979 Gas analysis. Calibration gas mixtures. Certificate of mixture preparation.
NF X20-205-4*NF EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4 : continuous syringe injection method.
NF EN ISO 6145-11:2008 Gas analysis - Preparation of gas mixtures for calibration using dynamic volumetric methods - Part 11: electrochemical generation
NF EN ISO 6145-5:2011 Gas analysis - Preparation of gas mixtures for calibration using dynamic volumetric methods - Part 5: Capillary calibration devices
NF EN ISO 6145-4:2008 Gas analysis - Preparation of gas mixtures for calibration using dynamic volumetric methods - Part 4: continuous injection syringe method
NF EN ISO 6145-7:2018 Gas analysis - Preparation of gas mixtures for calibration using dynamic methods - Part 7: thermal mass flow controllers
NF EN ISO 6145-6:2017 Gas analysis - Preparation of gas mixtures for calibration using dynamic volumetric methods - Part 6: critical flow ports

Association of German Mechanical Engineers

VDI 3490 Blatt 7-1980 Measurement of gases; calibration gas mixtures; dynamic method of preparation by periodic injection
VDI 3490 Blatt 16-1994 Measurement of gases - Calibration gas mixtures - Dynamic preparation with critical orifice systems
VDI 3490 Blatt 14-1994 Measurement of gases - Calibration gas mixtures - Preparation of calibration gas mixtures by volumetric static method using glass vessels
VDI 3490 Blatt 17-1998 Measurement of gases - Calibration gas mixtures - Dynamic preparation with thermal mass flow controllers
VDI 3490 Blatt 13-1992 Measurement of gases; calibration gas mixtures; preparation of calibration gas mixtures by saturation methods

British Standards Institution (BSI)

BS EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Critical orifices
BS EN ISO 6145-6:2003 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Critical orifices
BS ISO 6145-2:2014 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Piston pumps
BS EN ISO 6145-1:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration
BS EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Methods of calibration
BS EN ISO 6145-8:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Diffusion method
BS EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Diffusion method
BS EN ISO 6145-9:2009 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Saturation method
BS EN ISO 6145-9:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Saturation method
BS EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Permeation method
BS EN ISO 6145-10:2002 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Permeation method
BS EN ISO 6145-1:2019 Gas analysis. Preparation of calibration gas mixtures using dynamic methods - General aspects
BS ISO 6145-2:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Volumetric pumps
BS EN ISO 6145-11:2006 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Electrochemical generation
BS EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11:Electrochemical generation
BS EN ISO 6145-6:2017 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Critical flow orifices
BS ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Thermal mass-flow controllers
BS EN ISO 6145-4:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Continuous syringe injection method
BS EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Continuous syringe injection method
BS EN ISO 6144:2006(2007) Gas analysis — Preparation of calibration gas mixtures — Static volumetric method
BS EN ISO 6145-10:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10 : Permeation method
BS EN ISO 6144:2003 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
BS EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
BS EN ISO 6145-7:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Thermal mass-flow controllers
BS EN ISO 6145-8:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 8 : Diffusion method
BS EN ISO 6145-7:2018 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Thermal mass-flow controllers
BS EN ISO 6145-5:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Capillary calibration devices
BS EN ISO 6145-11:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11 : Electrochemical generation
BS ISO 11195:1996 Gas mixers for medical use. Stand-alone gas mixers
BS ISO 11195:2018 Gas mixers for medical use. Stand-alone gas mixers
BS EN 720-2:1997 Transportable gas cylinders - Gases and gas mixtures Part 2. Determination of flammability and oxidizing ability of gases and gas mixtures
BS EN 720-1:1999 Transportable gas cylinders - Gases and gas mixtures - Properties of pure gases
BS EN ISO 6145-4:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 4 : Continuous syringe injection method
BS 4559-4:2000 Methods for preparation of calibration gas mixtures - Certificate of mixture preparation

American National Standards Institute （ANSI)

ANSI/EIA 364-65A:1997 Mixed Flowing Gas
ANSI/AAMI/ISO 11195:1995(2014) Gas mixers for medical use—Stand-alone gas mixers

International Organization for Standardization (ISO)

ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices
ISO 7589:2002 Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer
ISO 6145-2:2014 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 2: Piston pumps
ISO 6145-3:1986 Gas analysis — Preparation of calibration gas mixtures — Dynamic volumetric methods — Part 3: Periodic injections into a flowing gas stream
ISO 6145-6:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices
ISO 6145-9:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
ISO 6145-9:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
ISO 6145-1:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
ISO 6145-6:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 6 : Sonic orifices
ISO 6145-2:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 2: Volumetric pumps
ISO 6144:2003 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
ISO 6144:1981 Gas analysis; Preparation of calibration gas mixtures; Static volumetric methods
ISO 6145-1:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 1 : Methods of calibration
ISO 6145-10:2002 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method
ISO 6145-8:2005 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method
ISO 6145-4:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 4 : Continuous injection method
ISO 6145-11:2005 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
ISO 6145-1:2019 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11: Electrochemical generation
ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
ISO 6145-7:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
ISO 11195:2018 Gas mixers for medical use - Stand-alone gas mixers
ISO 11195:1995 Gas mixers for medical use - Stand-alone gas mixers
ISO 6145-5:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 6145-4:2004 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method
ISO 6145-5:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 6145-9:2001/Cor 1:2002 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method; Technical Corrigendum 1
ISO 6145-7:2018 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers
ISO 6141:1984 Gas analysis — Calibration gas mixtures — Certificate of mixture preparation
ISO 6141:1979 Gas analysis — Calibration gas mixtures — Certificate of mixture preparation
ISO 7395:1984 Gas analysis — Preparation of calibration gas mixtures — Mass dynamic method

Spanish Association for Standardization (UNE)

UNE 77243-3:2001 Gas analysis. Preparation of calibration gas mixtures. Dinamic volumetric methods. Part 3: Periodic injection into a flowing gas stream.
UNE 77243-2:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 2: Volumetric pumps
UNE 77243-4:2001 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 4: Continuous injection method.
UNE 77244:2004 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
UNE 77243-1:2001 Gas analysis.Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 1: Methods of calibration.
UNE 77243-10:2004 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method
UNE-EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
UNE-EN ISO 6144:2007 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
UNE-EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
UNE-EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
UNE-EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
UNE-EN ISO 6145-6:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
UNE-EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
UNE-ISO 6145-9:2007 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 9: Saturation method (ISO 6145-9:2001)
UNE-EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
UNE-EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005)
UNE-EN ISO 6145-7:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
UNE-ISO 6145-8:2007 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 8: Diffusion method (ISO 6145-8:2005)
UNE 77243-7:2004 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
UNE-ISO 6145-7:2010 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 7: Thermal mass-flow controllers
UNE-ISO 6145-1:2006 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 1: Methods of calibration (ISO 6145-1:2003)
UNE-ISO 6145-6:2006 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 6: Critical orifices (ISO 6145-6:2003)
UNE-EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
UNE-ISO 6145-11:2007 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 11: Electrochemical generation. (ISO 6145-11:2005)
UNE-EN 720-1:1999 TRANSPORTABLE GAS CYLINDERS. GASES AND GAS MIXTURES - PART 1: PROPERTIES OF PURE GASES.
UNE-EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
UNE-EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
UNE-ISO 6145-5:2006 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 5: Capillary calibration devices (ISO 6145-5:2001)
UNE-ISO 6145-4:2008 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 4: Continuous syringe injection method. (ISO 6145-4:2004)

Korean Agency for Technology and Standards (KATS)

KS I ISO 6145-6-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 6：Sonic orifices
KS A ISO 7589:2007 Photography－Illuminants for sensitometry－Specifications for daylight, incandescent tungsten and printer
KS I ISO 6145-8-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 8：Diffusion method
KS I ISO 6145-2-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 2：Volumetric pumps
KS I ISO 6145-10:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
KS I ISO 6145-9:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
KS I ISO 6144-2015(2020) Gas analysis－Preparation of calibration gas mixtures－Static volumetric method
KS I ISO 6145-2-2020 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 2：Volumetric pumps
KS I ISO 6145-2:2007 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 2:Volumetric pumps
KS I ISO 6145-9:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 9:Saturation method
KS I ISO 6145-1:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS I ISO 6145-9:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 9：Saturation method
KS I ISO 6145-2:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 2：Volumetric pumps
KS I ISO 6145-6:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 6：Sonic orifices
KS I ISO 6145-6:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 6:Sonic orifices
KS I ISO 6145-8-2020 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 8：Diffusion method
KS I ISO 6145-1:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 1:Methods of calibration
KS I ISO 6144:2010 Gas analysis-Preparation of calibration gas mixtures-Static volumetric method
KS I ISO 6144:2015 Gas analysis－Preparation of calibration gas mixtures－Static volumetric method
KS I ISO 6144-2020 Gas analysis－Preparation of calibration gas mixtures－Static volumetric method
KS I ISO 6145-10:2008 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 10:Permeation method
KS I ISO 6145-1-2020 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS I ISO 6145-8:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 8:Diffusion method
KS I ISO 6145-10:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 10：Permeation method
KS I ISO 6145-1-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS I ISO 6145-8:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 8：Diffusion method
KS I ISO 6145-6-2020 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 6：Sonic orifices
KS I ISO 6145-11-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 11：Electrochemical generation
KS I ISO 6145-11-2020 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 11：Electrochemical generation
KS I ISO 6145-7:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
KS I ISO 6145-7:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 7:Thermal mass-flow controllers
KS I ISO 6145-11:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 11：Electrochemical generation
KS I ISO 6145-11:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 11:Electrochemical generation
KS I ISO 6145-5-2015(2020) Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices
KS I ISO 6145-5-2020 Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices
KS I ISO 6145-7-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
KS P ISO 11195-2023 Gas mixers for medical use — Stand-alone gas mixers
KS I ISO 6145-4:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 4：Continuous syringe injection method
KS P ISO 11195-2008(2018) Gas mixers for medical use－Stand-alone gas mixers
KS I ISO 6145-4-2020 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 4：Continuous syringe injection method
KS I ISO 6145-4:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 4:Continuous syringe injection method
KS I ISO 6145-4-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 4：Continuous syringe injection method
KS I ISO 6145-7-2020 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
KS I ISO 6145-5:2010 Gas analysis-Preparation of calibraion gas mixtures using dynamic volumetric methods-Part 5:Capillary calibration devices
KS I ISO 6145-5:2015 Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices
KS P ISO 11195:2008 Gas mixers for medical use－Stand-alone gas mixers

GSO

GSO ISO 6145-9:2013 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 9: Saturation method
GSO ISO 6144:2008 Gas analysis - Preparation of Calibration gas mixtures - Static Volumetric method
GSO ISO 6145-2:2013 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 2: Volumetric pumps
GSO ISO 6145-10:2013 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 10: Permeation method
GSO ISO 6145-6:2013 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 6: Critical orifices
OS GSO ISO 6144:2008 Gas analysis - Preparation of Calibration gas mixtures - Static Volumetric method
GSO ISO 6145-11:2007 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods – Part 11: Electrochemical generation
BH GSO ISO 6145-1:2023 Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 1: General aspects
GSO ISO 6145-1:2023 Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 1: General aspects
BH GSO ISO 6145-2:2016 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 2: Volumetric pumps
BH GSO ISO 6145-9:2016 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 9: Saturation method
BH GSO ISO 6145-8:2016 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 8: Diffusion method
OS GSO ISO 6145-9:2013 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 9: Saturation method
GSO ISO 6145-5:2013 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 5: Capillary calibration devices
BH GSO ISO 6145-6:2016 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 6: Critical orifices
OS GSO ISO 6145-6:2013 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 6: Critical orifices
GSO ISO 6145-8:2013 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 8: Diffusion method
GSO ISO 6145-7:2013 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 7: Thermal mass-flow controllers
GSO ISO 6145-4:2013 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 4: Continuous syringe injection method
GSO ISO 11195:2015 Gas mixers for medical use -- Stand-alone gas mixers
OS GSO ISO 11195:2015 Gas mixers for medical use -- Stand-alone gas mixers
BH GSO ISO 6145-7:2016 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 7: Thermal mass-flow controllers
OS GSO ISO 6145-7:2013 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 7: Thermal mass-flow controllers
OS GSO ISO 6145-4:2013 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 4: Continuous syringe injection method

Danish Standards Foundation

DS/EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices
DS/EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
DS/EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
DS/EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method
DS/EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method
DS/EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
DS/EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
DS/EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
DS/EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
DS/EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method

European Committee for Standardization (CEN)

EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices
EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
EN ISO 6145-9:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
EN ISO 6145-1:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
EN ISO 6145-7:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
EN ISO 6145-5:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
EN 720-2:1996 Transportable Gas Cylinders - Gases and Gas Mixtures - Part 2: Determination of Flammability and Oxidizing Ability of Gases and Gas Mixtures

German Institute for Standardization

DIN EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003); English version of DIN EN ISO 6145-6:2008-11
DIN EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005); English version of DIN EN ISO 6145-8:2008-11
DIN EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002); English version of DIN EN ISO 6145-10:2008-11
DIN 51898-2:2017-10 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 2: Preparation from gas mixtures
DIN EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003); English version of DIN EN ISO 6145-1:2008-11
DIN 51898-2 E:2016-11 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 2: Preparation from gas mixtures
DIN EN ISO 6144:2006-11 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003); German version EN ISO 6144:2006
DIN EN ISO 6145-1:2020-02 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019); German version EN ISO 6145-1:2019
DIN EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005); English version of DIN EN ISO 6145-11:2008-11
DIN EN ISO 6145-1 E:2018-09 Gas Analysis Preparation of Calibration Gas Mixtures Using Dynamic Methods Part 1: General Aspects (Draft)
DIN EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003); English version of DIN EN ISO 6144:2006-11
DIN EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004); English version of DIN EN ISO 6145-4:2008-11
DIN EN ISO 6145-8:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005); German version EN ISO 6145-8:2008
DIN EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
DIN EN ISO 6145-5:2011-03 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009); German version EN ISO 6145-5:2010
DIN CEN ISO/TS 21805:2019*DIN SPEC 14039:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers
DIN EN ISO 6145-6 E:2016-05 Gas Analysis Preparation of Calibration Gas Mixtures Using Dynamic Methods Part 6: Critical Flow Orifice Plate (Draft)
DIN EN ISO 6145-10:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002); German version EN ISO 6145-10:2008
DIN EN ISO 6145-9:2011-03 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009); German version EN ISO 6145-9:2010
DIN EN ISO 6145-7 E:2017-10 Preparation of calibration gas mixtures by the dynamic volumetric method for gas analysis Part 7: Thermal mass flow controller (draft)
DIN EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
DIN 1310:1984-02 Composition of (gaseous, liquid and solid) mixtures; concepts, symbols
DIN EN ISO 6145-11:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005); German version EN ISO 6145-11:2008
DIN 1310:1970 Composition of (gaseous, liquid and solid) mixtures; concepts, symbols
DIN EN ISO 6145-6:2017-12 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017); German version EN ISO 6145-6:2017
DIN CEN ISO/TS 21805:2019-07*DIN SPEC 14039:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-7:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-7:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
DIN EN ISO 6145-4:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004); German version EN ISO 6145-4:2008

KR-KS

KS I ISO 6145-9-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
KS I ISO 6145-10-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method

BE-NBN

NBN T 97-110-1983 Gas analysis - Preparation of calibration gas mixtures - Static volumetric methods

Lithuanian Standards Office

LST EN ISO 6144:2007 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
LST EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
LST EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
LST EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
LST EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
LST EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
LST EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005)
LST EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
LST EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
LST EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)

CEN - European Committee for Standardization

EN ISO 6145-7:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers

VN-TCVN

TCVN 6716-2013 Gas and gas mixture.Determination of toxicity of gas or gas mixture

Canadian Standards Association (CSA)

CSA ISO 11195:2019 Gas mixers for medical use—Stand-alone gas mixers
CAN/CSA-ISO 11195:2014 Gas mixers for medical use - Stand-alone gas mixers (First Edition)

YU-JUS

JUS H.F8.400-1990 Gas analysis. Calibration gas mirtures. Certificate of mixture preparat ion

U.S. Military Regulations and Norms

ARMY MIL-PRF-71185-1999 DYNAMIC REFERENCE UNIT HYBRID (DRUH)

Others: Standard mixed gas,dynamic gas,mixed composition,mixed standard gas,Gas Mixing Instruments,Gas Mixing Instruments,dynamic gas,gas mixing system,gas mixing device,gas mixing device,gas mixing,Gas Mix Control,gas dynamics,gas dynamics,Gas Dynamic Mixer,dynamic mixing,dynamic gas mixing,dynamic gas mixing