Analysis of Ten Articles of Atmosphere

Analysis of Ten Articles of Atmosphere, Total:258 items.

The international standard classification for "Analysis of Ten Articles of Atmosphere" includes: Geology. Meteorology. Hydrology , Analytical chemistry in general , Analytical chemistry , Water of natural resources , Corrosion of metals .

The Chinese standard classification for "Analysis of Ten Articles of Atmosphere" includes: Meteorology , Electrochemical, thermochemistry and optical profile type analyzer , Petroleum exploration, development, gathering and transportation engineering in general , Metal chemical property test method .

---

未注明发布机构

• DIN ISO 22309 E:2015-05 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
• IEEE Std 111-2000(R2007) IEEE Standard for Wide-Band (Greater Than 1 Decade) Transformers
• DIN EN ISO 20768:2022 Vapor products – Machine for routine analysis of vapor products – Terms and standard conditions
• DIN 51898-2 E:2016-11 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 2: Preparation from gas mixtures

中国气象局

• QX/T 508-2019 Specifications for carbon analysis of atmospheric aerosol by filter sampling

National Metrological Technical Specifications of the People's Republic of China

• JJF 1363-2012 Program of Pattern Evaluation of Sulfur Hydrogen Gas Analyzers
• JJF 1362-2012 Program of Pattern Evaluation of Flue Gas Analyzers

Group Standards of the People's Republic of China

• T/IGRS 0011.4-2021 Quality analysis of internet terminal product based on big data Part Ⅳ: Platform
• T/QGCML 1448-2023 The English translation of the twenty-four solar terms and the seventy-two solar terms based on climate and phenology
• T/IGRS 0011.6-2021 Quality analysis of internet terminal product based on big data Part Ⅵ: Decision
• T/IGRS 0011.5-2021 Quality analysis of internet terminal product based on big data Part Ⅴ: Data analysis
• T/STIC 120062-2022 Data service requirements for administration of fire safety based on big data analytics
• T/IGRS 0011.1-2021 Quality analysis of internet terminal product based on big data Part I: Framework
• T/QGCML 3131-2024 Portable atmospheric particulate matter intelligent detection analyzer

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 13971-1992 Specification of ultra - Violet gas analyzers
• GB/T 25923-2010 Specification of on-line gas analyzers
• GB/T 13580.1-1992 General princeptes for analytial methods of the wet precipitation
• GB/T 25929-2010 Specification of infrared gas analyzers
• GB/T 13971-2013 Specification of ultra-violet gas analyzers

Professional Standard - Machinery

• JB/T 9359.1-1999 Specification of infrared gas analyzers
• JB/T 6874-1993 Liquid Chromatograph Test Method?

Professional Standard - Nuclear Industry

• EJ 194.1-1982 Environmental samples.Method for analyzing fluoride content in soil
• EJ 192.1-1982 Environmental samples.Method for analyzing fluoride content in atmosphere

Taiwan Provincial Standard of the People's Republic of China

• CNS 11117-1984 Method for Size Analysis of Coke (Nominal Top Size Greater Than 20 mm)

Military Standard of the People's Republic of China-General Armament Department

• GJB 1532A-2021 General specification for atmospheric analysis instruments for submarines
• GJB 1532-1992 General specification for atmospheric analysis instruments for submarines

中华人民共和国环境保护部

• GB 13580.1-1992 General princeptes for analytial methods of the wet precipitation

Liaoning Provincial Standard of the People's Republic of China

• DB21/T 2487-2015 Technical Specifications for Mesoscale Convective Synoptic Analysis

Jilin Provincial Standard of the People's Republic of China

• DB22/T 2919-2018 Code for analysis of meteorological conditions for weather modification operations

Professional Standard - Aviation

• HB 6445.2-1990 Flight dynamics concepts, quantities and symbols for the movement of the aircraft and the atmosphere relative to the Earth

Professional Standard - Post and Telecommunication

• YD/T 4699-2024 Security technical requirements for business analysis application systems based on big data

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

• GB/T 34203-2017 Corrosion of metals and alloys--Air pollutant monitoring and analysis methods

Professional Standard - Meteorology

• QX/T 70-2007 Determination of elemental carbon and organic carbon of atmospheric aerosols-thermal/optical analysi

Korean Agency for Technology and Standards (KATS)

• KS D 1710-2019 Methods for chemical analysis of silver bullion
• KS D 2588-2005(2010) Method for chemical analysis of trimanganese tetroxide for ferrite
• KS D ISO 22309:2011 Microbeam analysis-Quantitative analysis using energy-dispersive spectrometry(EDS)
• KS D 1924-2011(2016) Methods for chemical analysis of ferrosilicochromium
• KS D 1959-2003(2013) Methods for chemical analysis of copper products
• KS B 5356-1981 Continuous analyzers for chlorine in ambient air
• KS A 0006-2019 Standard atmospheric conditions for testing
• KS B 5356-2001 Continuous analyzers for chlorine in ambient air
• KS E 3066-2013(2018) Methods for chemical analysis of high-silica raw materials for ceramics
• KS L 3410-2015(2020) Chemical analysis for highly purity graphite materials
• KS M 8531-2018 Sodium hydroxide for nitrogen compounds analysis
• KS V ISO 6185-3-2013(2018) Inflatable boats–Part 3: Boats witha maximum motor power rating of 15 kW and greater
• KS D 2008-2007(2017) Methods for chemical analysis of Pb-free solder(Tin alloys)
• KS J 4201-2018 Methods for quantitative analysis of serum albumin
• KS M 2301-1995 METHODS FOR SAMPLING IN EXHAUST GAS FOR METAL ANALYSIS
• KS D 7106-1999(2019) Solid wires for CO2 gas shielded arc welding for atmospheric corrosion resisting steel
• KS V ISO 6185-3:2013 Inflatable boats–Part 3: Boats witha maximum motor power rating of 15 kW and greater
• KS V ISO 6185-3:2005 Inflatable boats-Part 3:Boats with a maximum motor power rating of 15 kW and greater
• KS M 0031-2017 General rules for gas chromatographic analysis
• KS D 1679-2020 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
• KS W ISO 1151-2:2008 Flight dynamics-Concepts, quantities and symbols-Part 2:Motions of the aircraft and the atmosphere relative to the Earth
• KS W 0637-1993 Flight dynamics-Concepts,quantities and symbols-Part2:Motions of the aircraft and the atmosphere relative to the Earth
• KS E ISO 728:2002 Coke(nominal top size greater than 20 mm)－Size analysis by sieving
• KS W 0636-1992(2012) Flight Dynamics-Concepts, Quantities and Symbols-Part 1 : Aircraft Motion Relative to the Air
• KS W 0637-1999(2009) FLIGHT DYNAMICS-CONCEPTS, QUANTITIES AND SYMBOLS-PART 2 : MOTIONS OF THE AIRCRAFT AND THE ATMOSPHERE RELATIVE TO THE EARTH
• KS W ISO 1151-2-2015 Flight dynamics－Concepts, quantities and symbols－Part 2：Motions of the aircraft and the atmosphere relative to the Earth
• KS L 1613-2011(2016) Methods for chemical analysis of fine silicon nitride powers for fine ceramics
• KS D 1686-2011(2016) Method for x-ray fluorescence spectrometric analysis of ferroalloys
• KS W 0637-2013 FLIGHT DYNAMICS-CONCEPTS, QUANTITIES AND SYMBOLS-PART 2 : MOTIONS OF THE AIRCRAFT AND THE ATMOSPHERE RELATIVE TO THE EARTH
• KS D ISO 22489-2023 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
• KS E ISO 2325:2002 Coke－Size analysis(Nominal top size 20 mm or less)
• KS B 5643-2003(2018) Continuous analyzers for oxidants in ambient air
• KS D 2597-1996(2016) Method for X-ray fluorescence spectrometric analysis of zirconium and zirconium alloys

IEC - International Electrotechnical Commission

• IEC 60160:1963 Standard Atmospheric Conditions for Test Purposes (Edition 1.0)

Japanese Industrial Standards Committee (JISC)

• JIS B 7955:1995 Continuous analyzers for chlorine in ambient air
• JIS B 7957:1992 Continuous analyzers for oxidants in ambient air
• JIS B 7951:1986 Continuous analyzer for carbon monoxide in ambient air
• JIS B 7951:2004 Continuous analyzer for carbon monoxide in ambient air
• JIS B 7952:2004 Continuous analyzer for sulfur dioxide in ambient air
• JIS B 7953:2004 Continuous analyzers for oxides of nitrogen in ambient air
• JIS B 7951:1998 Continuous analyzer for carbon monoxide in ambient air
• JIS B 7953:1997 Continuous analysers for oxides of nitrogen in ambient air
• JIS F 1051-3:2004 Inflatable boats -- Part 3: Boats with a maximum motor power rating of 15 kW and greater
• JIS C 60355:1993 An appraisal of the problems of accelerated testing for atmospheric corrosion

AENOR

• UNE 72322:1985 EVALUATION OF RELATIVE WHITENESS (FOR FIELD GREATER THAN 4o)
• UNE 28511-2:1983 TERMS AND SYMBOLS OF THE MECHANICS OF FLIGHT. MOVEMENT OF AIRCRAFT ANDOF THE ATMOSPHERE WITH REGARD TO EARTH.
• UNE 21335:1976 AN APPRAISAL OF THE PROBLEMS OF ACCELERATED TESTING FOR ATMOSPHERIC CORROSION.

RU-GOST R

• GOST 29269-1991 Soils. General requirements for the fulfilment of analyses
• GOST R ISO 22309-2015 State system for insuring the uniformity of measurements. Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
• GOST R ISO 15202-3-2008 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 3. Analysis
• GOST 16274.0-1977 Bismuth. General requirements for methods of analysis
• GOST R 54302-2011 Sealing devices. Test methods of security seals resistance to environmental climatic and mechanical factors occurring in operation
• GOST R ISO 187-2012 Pulps, paper, board. Standard atmosphere for conditioning and testing. Method for monitoring the atmosphere and conditioning

SAE - SAE International

• SAE AIR6219-2018 Development of Atmospheric Neutron Single Event Effects Analysis for Use in Safety Assessments

ES-UNE

• SAE AIR6219-2023 Development of Atmospheric Neutron Single Event Effects Analysis for Use in Safety Assessments

International Organization for Standardization (ISO)

• ISO 22309:2011 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
• ISO 728:1981 Coke (nominal top size greater than 20 mm); Size analysis
• ISO 19702:2006 Toxicity testing of fire effluents - Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis
• ISO 728:1995 Coke (nominal top size greater than 20 mm) - Size analysis by sieving
• ISO 2325:1986 Coke; Size analysis (Nominal top size 20 mm or less)
• ISO 2325:1972 Title missing - Legacy paper document
• ISO 1151-2:1974 Terms and symbols for flight dynamics — Part 2: Motions of the aircraft and the atmosphere relative to the Earth
• ISO 6326-2:1981 Gas analysis; Determination of sulphur compounds in natural gas; Part 2 : Gas chromatographic method using an electrochemical detector for the determination of odoriferous sulphur compounds
• ISO 6185-3:2001 Inflatable boats - Part 3: Boats with a maximum motor power rating of 15 kW and greater
• ISO 12963:2017/Amd 1:2020 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - Amendment 1: Correction to Formula 5
• ISO 1151-2:1985 Flight dynamics; Concepts, quantities and symbols; Part 2 : Motions of the aircraft and the atmosphere relative to the Earth
• ISO 6142-1:2015 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures
• ISO 8273:1985 Doors and doorsets; Standard atmospheres for testing the performance of doors and doorsets placed between different climates
• ISO 1151-2:1985/Add 1:1987 Flight dynamics — Concepts, quantities and symbols — Part 2: Motions of the aircraft and the atmosphere relative to the Earth — Addendum 1
• ISO 1151-2:1985/Amd 1:1987 Flight dynamics — Concepts, quantities and symbols — Part 2: Motions of the aircraft and the atmosphere relative to the Earth — Addendum 1

SCC

• AENOR UNE 81455:1985 INSTRUMENTS FOR DETECTING OR ANALYZING CHEMICAL POLLUTANTS PRESENT IN THE ATMOSPHERE. CLASSIFICATION
• AWWA ACE58102 Atmospheric Impacts on Source Water Quality
• AWWA SRC58324 Atmospheric Impacts on Source Water Quality
• AWWA JAW61916 Journal AWWA — Ten Primary Trends and Their Implications for Water Utilities
• AENOR UNE 21355:1977 NORMAL ATMOSPHERIC CONDITIONS FOR TESTS AND MEASUREMENTS
• BS ISO 22489:2006 Microbeam analysis. Electron probe microanalysis. Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
• ANS 2.21-2022 Criteria for Assessing Atmospheric Effects on the Ultimate Heat Sink
• BS 1548:1949 Analysed samples for metallurgical analysis
• AENOR UNE 60310:2022 Gaseous fuel pipelines with maximum operating pressure greater than 5 bar and less than or equal to 16 bar.
• DIN 51898-2:2017 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 2: Preparation from gas mixtures
• UNE-EN 12820:2003 Inspection and requalification of LPG tanks greater than 13 m3 underground.
• AENOR UNE 60310/1M:2018 Gaseous fuel pipelines with maximum operating pressure greater than 5 bar and less than or equal to 16 bar.
• AWWA WQTC58784 A New Gas Chromatography-based Method for the Analysis of Ethylene Thiourea
• VDI 3783 BLATT 1-1987 Dispersion of air pollutants in the atmosphere; dispersion of accident-related releases; safety analysis
• ANS 2.21-2012(R2016) Criteria for Assessing Atmospheric Effects on the Ultimate Heat Sink

TR-TSE

• TS 2327-1976 GENERAL METHODS OF TEST FOR PIGMENTS PART — X DETERMINATION OF DENSITY RELATIVE TO WATER AT 4"C
• TS 740-1969 CHEMICAL ANALYSIS OF ALUMINIUM AND|ITS ALLOYS GRAVIMETRIC DETERMINATION OF SILICON (Silicon content greater than or equal to 0,30 %)
• TS 2561-1977 Terms And Symbols For Flight Dynamics Part U : Motions Of The Aircraft And The Atmosphere Relative To The Earth
• TS 1945-1975 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — PARTICLE S?ZE ANALYSIS — SIEVING METHOD
• TS 723-1969 CHEMICAL ANALYSIS OF ALUMINIUM AND ITS ALLOYSELEKTROLYTIC DETERMINATION OF COPPER ?N ALUMINIUM ALLOYS (Copper content greater than or equal to 0,50 %)

Compressed Gas Association (U.S.)

• CGA M-9-2008 Maintaining bulk gas supplier fingerprint analysis at compressed medical gas filling facilities
• CGA M-8-2011 Guideline for the manufacturer of calibration gas standards used to analyze medical gases

Association Francaise de Normalisation

• X20-377:1980 Gas analysis. METHODS2OF analysis of oxygen based on the paramagnetic properties of this gas.
• NF X20-377:1980 Gas Analysis - Methods for analyzing oxygen based on the paramagnetic properties of this gas
• NF A06-721:1966 Analyse chimique du cuivre à teneur supérieure ou égale à 99,90 pour cent - Dosage du cuivre.
• NF X20-300:1994 Air quality. Evaluation of the characteristics of gas analysers on test bench.
• NF C20-000-2-3*NF EN 60721-2-3:2014 Classification of environmental conditions - Part 2-3 : environmental conditions appearing in nature - Air pressure
• FD X43-212*FD ISO/TR 17737:2013 Workplace atmospheres - Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
• NF X43-056:2017 Ambient air - Metrology applied to the measurement of gaseous atmospheric pollutants - Traceability of the measurement results to standards
• NF R10-024:1994 Road vehicles. Motor vehicle road load. Determination under reference atmospheric conditions and reproduction on chassis dynamometer.
• NF EN 60721-2-3:2014 Classification of environmental conditions - Part 2-3: environmental conditions present in nature - Atmospheric pressure
• NF X43-014:2017 Air quality - Ambient air - Determination of total atmospheric deposition - Sampling - Preparation of samples prior analysis
• NF A06-722:1966 Chemical analysis of copper containing not less than 99,90 per cent copper. Hydrogen reduction test and estimation of oxygen content.
• NF V03-714:1989 {durum} wheat semolinas and alimentary pasta. Estimation of cooking quality of spaghetti by sensory analysis.
• NF EN IEC 61936-2:2023 Electrical installations with voltages greater than 1 kV in alternating current and 1.5 kV in direct current - Part 2: direct current
• NF X11-640:1979 Sieve analysis of fine powders with air-jet sieve-apparatus.
• NF X43-014:2003 Air quality - Ambient air - Determination of total atmospheric deposition - Sampling - Preparation of samples prior analysis.
• NF EN IEC 61936-1:2021 Electrical installations with voltages greater than 1 kV in alternating current and 1.5 kV in direct current - Part 1: alternating current

German Institute for Standardization

• DIN ISO 22309:2015 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above (ISO 22309:2011)
• DIN 10172-1:1992 Microbiological analysis of milk; determination of coliforms; method with liquid medium
• DIN 51898-1:2014-05 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM / Note: CD-ROM enclosed
• DIN 52241-2:1986 Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; digestion method
• DIN 58960-4:1991-01 Photometer for analytical tests; requirements for the description of technical data for the user
• DIN 51898-2:2017-10 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 2: Preparation from gas mixtures

Institute of Electrical and Electronics Engineers (IEEE)

• Comparative Analysis: Existing Digital Health Stan Comparative Analysis: Existing Digital Health Standards, Guidelines, and Toolkits for Pandemic Response
• IEEE Std 111-2000 IEEE Standard for Wide-Band (Greater Than 1 Decade) Transformers

Danish Standards Foundation

• DS 927:1955 Textile testing. Sampling, standard atmosphere for testing and statistical interpretation of the test results
• DS/EN 20187:1993 Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples

Standard Association of Australia （SAA）

• AS/NZS 3008.1.1:1998 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
• AS/NZS 3008.1.1:2009 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
• AS/NZS 3008.1.2:1998 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions
• AS 3580.2.2:1990 Methods for sampling and analysis of ambient air - Preparation of reference test atmospheres - Compressed gas method

ESDU - Engineering Sciences Data Unit

• ESDU 08004-2008 Example of risk analysis applied to en-route flight path for large jet transport aircraft
• ESDU 89049 B-1993 Response of structures to atmospheric turbulence. Response to across-wind turbulence components.
• ESDU 78017-1978 True airspeed in the International Standard Atmosphere and equivalent airspeed corresponding to Mach number and pressure altitude.
• ESDU 78002 C-1998 Evaluation of the attenuation of sound by a uniform atmosphere.
• ESDU 78002 C-2011 Evaluation of the attenuation of sound by a uniform atmosphere
• AERO 00.03.28 A-1978 Conditions behind normal shock waves in a perfect gas for various values of gamma.
• ESDU 68046 D-1992 Atmospheric data for performance calculations.

American Society for Testing and Materials (ASTM)

• ASTM D1356-15a Standard Terminology Relating to Sampling and Analysis of Atmospheres
• ASTM D1356-17 Standard Terminology Relating to Sampling and Analysis of Atmospheres
• ASTM D1356-20a Standard Terminology Relating to Sampling and Analysis of Atmospheres
• ASTM D1356-20 Standard Terminology Relating to Sampling and Analysis of Atmospheres
• ASTM D1356-05(2010) Standard Terminology Relating to Sampling and Analysis of Atmospheres
• ASTM D1356-14 Standard Terminology Relating to Sampling and Analysis of Atmospheres
• ASTM D1356-05 Standard Terminology Relating to Sampling and Analysis of Atmospheres
• ASTM D1356-00a Standard Terminology Relating to Sampling and Analysis of Atmospheres
• ASTM D1356-15 Standard Terminology Relating to Sampling and Analysis of Atmospheres
• ASTM D1356-15b Standard Terminology Relating to Sampling and Analysis of Atmospheres
• ASTM D1356-14a Standard Terminology Relating to Sampling and Analysis of Atmospheres
• ASTM D1356-14b Standard Terminology Relating to Sampling and Analysis of Atmospheres
• ASTM D6913-04(2009)e1 Standard Test Methods for Particle-Size Distribution 40;Gradation41; of Soils Using Sieve Analysis
• ASTM G50-76(2003) Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
• ASTM E406-81(2008) Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis
• ASTM D3798-03 Standard Test Method for Analysis of p -Xylene by Gas Chromatography
• ASTM E406-81(2003) Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis
• ASTM E406-81(2012) Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis
• ASTM D1914-95(2004)e1 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres

VN-TCVN

• TCVN 5225-2007 Coke (nominal top size greater than 20 mm).Size analysis by sieving

IX-EU/EC

• EEC/2645/92-1992 Commission Regulation Amending Regulation (EEC) No 2676/90 Determining Community Methods for the Analysis of Wines
• EC/69/96-1996 Commission Regulation amending Regulation (EEC) No 2676/90 determining Community methods for the analysis of wines
• NO 2091/2002-2002 COMMISSION REGULATION (EC) amending Regulation (EC) No 2870/2000 laying down Community reference methods for the analysis of spirits drinks
• NO 1989/2003-2003 COMMISSION REGULATION of 6 November 2003 amending Regulation (EEC) No 2568/91 on the characteristics of olive oil and olive-pomace oil and on the relevant methods of analysis

CZ-CSN

• CSN 44 1342-1993 Coke. Size analysis. Nominal top size greater than 10 mm.
• CSN 62 1528-1976 Ageing tests of rubber in atmoapheric condi- tiona
• CSN 38 5554-1988 Gaseous fuels Determination of odorants by gas chromatography
• CSN 62 1528-1979 Rubber. Ageing tests in atmospheric conditions
• CSN 38 5538-1989 Gaseous fuels. Determination of the content of ethin by gas chromatography
• CSN 67 3091 Z2-1998 Test to determine the resistance of coatings to atmospheric conditions

British Standards Institution (BSI)

• BS 7527-2.3:1991 Classification of environmental conditions - Environmental conditions appearing in nature - Air pressure
• BS 7527 Sec.2.3:1991 Classification of environmental conditions. Environmental conditions appearing in nature. Air pressure
• BS 1016-110.1:1996 Methods for analysis and testing of coal and coke - Size analysis of coke - Nominal top size greater than 20 mm
• BS EN 334:2005 Gas pressure regulators for inlet pressures up to 100 bar
• BS EN ISO 18314-4:2024 Analytical colorimetry - Metamerism index for pairs of samples for change of illuminant

HU-MSZT

• MSZ 10800-1966 Measurement of standard air ring inspection. is equal to standard atmospheric pressure and relative humidity
• MSZ 21880/3-1982 Chemical analysis of atmospheric precipitation, unit conductivity testing

TH-TISI

• TIS 1794-1999 Motor vehicle road load.determination under reference atmospheric conditions and reproduction on chassis dynamometer
• TIS 2574-2012 Airborne particulate matter sampling and analysis in workplace environment

BE-NBN

• NBN T 97-001-1984 Gas analysis- Sampling and transfer equipment for gases supplying an analytical unit
• NBN B 15-250-1975 For chemical analysis of hardened concrete, carbonic anhydride content
• NBN B 15-257-1975 For chemical analysis of hardened concrete, halide content
• NBN B 15-256-1975 Chemical analysis of hardened concrete. Sulfur (acid) anhydride content
• NBN B 15-252-1975 Chemical analysis of hardened concrete. Carbonic anhydride content
• NBN B 15-251-1975 Chemical analysis of hardened concrete. loss in fire
• NBN B 15-253-1975 Chemical analysis of hardened concrete. Insoluble residue content
• NBN B 15-254-1975 Chemical analysis of hardened concrete. Dissolved silica content
• NBN B 15-255-1975 Chemical analysis of hardened concrete. Dissolved calcium oxide content

NL-NEN

• NEN-EN 50072-1993 Medical electrical equipment. Particular requirements for the safety of peritoneal dialysis equipment

API - American Petroleum Institute

• API PUBL 4340-1981 Evaluation and Analysis of Nitrogen Dioxide Aerometric Data (Withdrawn)
• API REPORT 17-1980 Review of Gas Analysis Techniques for Application to Combustible Gas Detectors
• API 4069-1970 ANALYSIS OF LOS ANGELES ATMOSPHERE REACTION DATA FROM 1968 AND 1969
• API 4132-1972 ATMOSPHERIC MEASUREMENT OF PHOTOCHEMICAL SMOG REACTIONS - A PRELIMINARY ANALYSIS - FINAL REPORT

American National Standards Institute （ANSI)

• ASME B16.38-2023 Large Metallic Valves for Gas Distribution

International Electrotechnical Commission (IEC)

• IEC 60721-2-3:2013 Classification of environmental conditions - Part 2-3: Environmental conditions appearing in nature - Air pressure
• IEC TR 60355:1971 An appraisal of the problems of accelerated testing for atmospheric corrosion

American Gear Manufacturers Association

• AGMA 04FTMS1-2004 Stress Analysis of Gear Drives Based on Boundary Element Method
• AGMA 99FTM14-1999 Effect of Material Defects on Gear Performance - a Case Study

US-FCR

• FCR COE IR ITL-93-3 FINAL REPORT-1993 USER'S MANUAL - GDAP, GRAPHICS-BASED DAM ANALYSIS PROGRAM VERSION 3.25

ZA-SANS

• SANS 553-3:2008 Inflatable boats Part 3: Boats with a maximum motor power rating of 15 kW and greater
• SANS 5925:2007 Moisture content of coal samples intended for general analysis (air-oven method)

CEN - European Committee for Standardization

• EN ISO 6185-3:2018 Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater

European Committee for Standardization (CEN)

• EN ISO 6185-3:2014 Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014)
• EN ISO 6185-3:2001 Inflatable Boats Part 3: Boats with a Maximum Motor Power Rating of 15 kW and Greater ISO 6185-3: 2001
• prEN 1991-1-9 Eurocode 1 - Actions on structures - Part 1-9: Atmospheric icing

International Telecommunication Union (ITU)

• ITU-R INFORME BS.943-1 SPANISH-1986 Protection of sound-broadcasting stations against atmospheric electricity
• ITU-R INFORME BS.303-3 SPANISH-1986 Determination of the effects of atmospheric noise on the grade of reception in the Tropical Zone
• ITU-T G.224-1993 MAXIMUM PERMISSIBLE VALUE FOR THE ABSOLUTE POWER LEVEL (POWER REFERRED TO ONE MILLIWATT) OF A SIGNALLING PULSE
• ITU-T Q.20-1989 Maximum Permissible Value for the Absolute Power Level of a Signalling Pulse - General Recommendations on Telephone Switching and Signalling - Functions and Information Flows for Services in the ISDN - Supplements (Study Group XI) 2 pp

RO-ASRO

• STAS 6500-1966 Cold shrink steel for double saw blades. size/dimensions
• STAS 9577-1974 CRUSHED WHITE MARBLE FOR THE MANUFACTURE OF WELDING ELECTRODES

PT-IPQ

• NP 3755-2-1999 Solid fuels Cokes.Size analysis Part 2:Particle size greater than 20mm

GSO

• GSO ISO 15985:2013 Plastics - Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions - Method by analysis of released biogas
• GSO ISO 3308:2007 Routine analytical cigarette – smoking machine – Definitions and standard conditions
• GSO IEC 60721-2-3:2015 Classification of environmental conditions - Part 2-3: Environmental conditions appearing in nature - Air pressure
• BH GSO ISO 1151-2:2016 Flight dynamics -- Concepts, quantities and symbols -- Part 2: Motions of the aircraft and the atmosphere relative to the Earth
• BH GSO ISO 22489:2017 Microbeam analysis -- Electron probe microanalysis -- Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
• GSO ISO 19702:2013 Toxicity testing of fire effluents -- Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis

European Committee for Electrotechnical Standardization（CENELEC）

• EN 116205/116206/116207:1995 Blank Details Specification: Hermetically Sealed Relays for Severe Static Environmental Conditions (116205) for Severe Mobile Environmental Conditions (116206) for Severe Airborne Environmental Conditions (116207)

VDI - Verein Deutscher Ingenieure

• VDI 3822 BLATT 2.2.9-2017 Schadensanalyse - Schaeden an Elastomerprodukten durch klimatische Beanspruchung

Canadian Standards Association (CSA)

• CSA C22.1HB-06SP-2006 CE Code Handbook - An Explanation of Rules of the Canadian Electrical Code, Part 1 Twentieth Edition
• CSA C22.1-06-2006 Canadian Electrical Code Part I Safety Standard for Electrical Installations Twentieth Edition

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

• ASHRAE CH-06-9-2-2006 An Analysis of the Effects of Ceiling Height on Air Distribution in Data Centers
• ASHRAE HI-02-19-3-2002 CFD Analysis on Rising Stream Around a Human Body and Its Effect on Inhalation Air Quality

ABS - American Bureau of Shipping

• ABS 125-2016 GUIDE FOR SPECTRAL-BASED FATIGUE ANALYSIS FOR VESSELS (FOR THE ‘SFA (years)’ CLASSIFICATION NOTATION)

KR-KS

• KS D ISO 22489-2018(2023) Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy

Acoustical Society of America (ASA)

• ASA S1.26-1995 Method for Calculation of the Absorption of Sound by the Atmosphere ASA 113

ES-AENOR

• UNE 81-455-1985 Classification of monitoring instruments or analytical instruments for chemical pollutants in the atmospheric environment

IN-BIS

• IS 228 Pt.8-1975 Methods of chemical analysis of steel Part 8 Gravimetric determination of silicon (for silicon ≥ 0.1%)

Indonesia Standards

• SNI 01-6143-2006 Spread fingerling class of jumbo tiger prawn, Penaeus monodon (Fabricius, 1978) Figerlings

CENELEC - European Committee for Electrotechnical Standardization

• HD 397-1979 Interpretation of the Analysis of Gases in Transformers and Other Oil-Filled Electrical Equipment in Service

GOST

• GOST 27313-1989 Solid fuel. Analytical indices designation and formulae of analysis results recalculation for various states fuel

IT-UNI

• UNI 3358-1953 Chemical analysis methods of metallic materials. Determination of antimony and tin in bronze with an iron content greater than 0.2570 and a phosphorus content greater than 0.20%. volume measurement method

American Nuclear Society (ANS)

• ANS 2.21-2012 Criteria for Assessing Atmospheric Effects on the Ultimate Heat Sink

Natural Gas Processor's Association (NGPA)

• GPA STD 2174-2014 Obtaining Liquid Hydrocarbon Samples for Analysis by Gas Chromatography

ANS - American Nuclear Society

• 2.21-2012 Criteria for Assessing Atmospheric Effects on the Ultimate Heat Sink

Others: Analysis of Ten Articles of Atmosphere